[PATCH] xfstests: optionally run all tests under quota

[PATCH] xfstests: optionally run all tests under quota

[Eric Sandeen]

This patch might be a little heavy handed, but it seems to
work; if you set USE_QUOTA=1 in your environment, all
tests should be run with quota on and enabled.

This will hopefully help shake out some of the ext4
quota problems, although one needs to keep an eye
on the console to see whether warnings scroll by.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
---

diff --git a/common.rc b/common.rc
index 6424871..4fde921 100644
--- a/common.rc
+++ b/common.rc
@@ -64,6 +64,9 @@ _mount_opts()
     *)
 	;;
     esac
+    if [ ! -z "$USE_QUOTA" ]; then
+	export MOUNT_OPTIONS="$MOUNT_OPTIONS -o usrquota,grpquota"
+    fi
 }
 
 _mkfs_opts()
@@ -161,6 +164,10 @@ _test_options()
     type=$1
     TEST_OPTIONS=""
 
+    if [ ! -z "$USE_QUOTA" ]; then
+	TEST_OPTIONS="-o usrquota,grpquota"
+    fi
+
     if [ "$FSTYP" != "xfs" ]; then
         return
     fi
@@ -202,6 +209,25 @@ _mount_ops_filter()
 
 }
 
+_setup_quota()
+{
+    mountpoint=$1
+    if [ ! -z "$USE_QUOTA" ]; then
+	case $FSTYP in
+	xfs)
+	    ;;
+	ext*|reiserfs)
+	    quotaoff $mountpoint &>/dev/null
+	    quotacheck -u -g $mountpoint
+	    quotaon $mountpoint
+	    ;;
+	*)
+	    _fail "Don't know how to turn on quota on $FSTYP"
+	    ;;
+	esac
+    fi
+}
+
 _scratch_mount_options()
 {
     _scratch_options mount
@@ -212,6 +238,7 @@ _scratch_mount_options()
 _scratch_mount()
 {
     _mount -t $FSTYP `_scratch_mount_options $*`
+    _setup_quota $SCRATCH_MNT
 }
 
 _scratch_unmount()
@@ -229,6 +256,7 @@ _test_mount()
 {
     _test_options mount
     _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $* $TEST_DEV $TEST_DIR
+    _setup_quota $TEST_DIR
 }
 
 _scratch_mkfs_options()

[PATCH] xfstests: optionally run all tests under quota

[Eric Sandeen]

This patch might be a little heavy handed, but it seems to
work; if you set USE_QUOTA=1 in your environment, all
tests should be run with quota on and enabled.

This will hopefully help shake out some of the ext4
quota problems, although one needs to keep an eye
on the console to see whether warnings scroll by.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
---

diff --git a/common.rc b/common.rc
index 6424871..4fde921 100644
--- a/common.rc
+++ b/common.rc
@@ -64,6 +64,9 @@ _mount_opts()
     *)
 	;;
     esac
+    if [ ! -z "$USE_QUOTA" ]; then
+	export MOUNT_OPTIONS="$MOUNT_OPTIONS -o usrquota,grpquota"
+    fi
 }
 
 _mkfs_opts()
@@ -161,6 +164,10 @@ _test_options()
     type=$1
     TEST_OPTIONS=""
 
+    if [ ! -z "$USE_QUOTA" ]; then
+	TEST_OPTIONS="-o usrquota,grpquota"
+    fi
+
     if [ "$FSTYP" != "xfs" ]; then
         return
     fi
@@ -202,6 +209,25 @@ _mount_ops_filter()
 
 }
 
+_setup_quota()
+{
+    mountpoint=$1
+    if [ ! -z "$USE_QUOTA" ]; then
+	case $FSTYP in
+	xfs)
+	    ;;
+	ext*|reiserfs)
+	    quotaoff $mountpoint &>/dev/null
+	    quotacheck -u -g $mountpoint
+	    quotaon $mountpoint
+	    ;;
+	*)
+	    _fail "Don't know how to turn on quota on $FSTYP"
+	    ;;
+	esac
+    fi
+}
+
 _scratch_mount_options()
 {
     _scratch_options mount
@@ -212,6 +238,7 @@ _scratch_mount_options()
 _scratch_mount()
 {
     _mount -t $FSTYP `_scratch_mount_options $*`
+    _setup_quota $SCRATCH_MNT
 }
 
 _scratch_unmount()
@@ -229,6 +256,7 @@ _test_mount()
 {
     _test_options mount
     _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $* $TEST_DEV $TEST_DIR
+    _setup_quota $TEST_DIR
 }
 
 _scratch_mkfs_options()

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: [PATCH] xfstests: optionally run all tests under quota

[Christoph Hellwig]

On Tue, Feb 09, 2010 at 01:26:31PM -0600, Eric Sandeen wrote:
> This patch might be a little heavy handed, but it seems to
> work; if you set USE_QUOTA=1 in your environment, all
> tests should be run with quota on and enabled.

I'd rather prefer a -quota option to ./check than a magic
environment variable.

Re: [PATCH] xfstests: optionally run all tests under quota

[Christoph Hellwig]

On Tue, Feb 09, 2010 at 01:26:31PM -0600, Eric Sandeen wrote:
> This patch might be a little heavy handed, but it seems to
> work; if you set USE_QUOTA=1 in your environment, all
> tests should be run with quota on and enabled.

I'd rather prefer a -quota option to ./check than a magic
environment variable.

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfstests: optionally run all tests under quota

[Rich Johnston]

On 02/09/2010 01:26 PM, Eric Sandeen wrote:
> This patch might be a little heavy handed, but it seems to
> work; if you set USE_QUOTA=1 in your environment, all
> tests should be run with quota on and enabled.
>
> This will hopefully help shake out some of the ext4
> quota problems, although one needs to keep an eye
> on the console to see whether warnings scroll by.
>
> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
>
> ---
>
>
> diff --git a/common.rc b/common.rc
> index 6424871..4fde921 100644
> --- a/common.rc
> +++ b/common.rc

Looks good

Reviewed-by: Rich Johnston <rjohnston@sgi.com>

Eric,

This patch has been committed to git://oss.sgi.com/xfs/cmds/xfstests, 
master branch, commit ID edd6bcf9.


Thanks
--Rich

Re: xfstests: optionally run all tests under quota

[Rich Johnston]

On 02/09/2010 01:26 PM, Eric Sandeen wrote:
> This patch might be a little heavy handed, but it seems to
> work; if you set USE_QUOTA=1 in your environment, all
> tests should be run with quota on and enabled.
>
> This will hopefully help shake out some of the ext4
> quota problems, although one needs to keep an eye
> on the console to see whether warnings scroll by.
>
> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
>
> ---
>
>
> diff --git a/common.rc b/common.rc
> index 6424871..4fde921 100644
> --- a/common.rc
> +++ b/common.rc

Looks good

Reviewed-by: Rich Johnston <rjohnston@sgi.com>

Eric,

This patch has been committed to git://oss.sgi.com/xfs/cmds/xfstests, 
master branch, commit ID edd6bcf9.


Thanks
--Rich

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfstests: optionally run all tests under quota

[Dave Chinner]

On Fri, Oct 26, 2012 at 11:49:18AM -0500, Rich Johnston wrote:
> On 02/09/2010 01:26 PM, Eric Sandeen wrote:
> >This patch might be a little heavy handed, but it seems to
> >work; if you set USE_QUOTA=1 in your environment, all
> >tests should be run with quota on and enabled.
> >
> >This will hopefully help shake out some of the ext4
> >quota problems, although one needs to keep an eye
> >on the console to see whether warnings scroll by.
> >
> >Signed-off-by: Eric Sandeen <sandeen@redhat.com>
> >
> >---
> >
> >
> >diff --git a/common.rc b/common.rc
> >index 6424871..4fde921 100644
> >--- a/common.rc
> >+++ b/common.rc
> 
> Looks good
> 
> Reviewed-by: Rich Johnston <rjohnston@sgi.com>
> 
> Eric,
> 
> This patch has been committed to
> git://oss.sgi.com/xfs/cmds/xfstests, master branch, commit ID
> edd6bcf9.

And here's the problem with committing 2 year old patches without
review:

$ grep "Can't initialize the DMAPI" [0-9]* | uniq
142.out.bad:Can't initialize the DMAPI
143.out.bad:Can't initialize the DMAPI
144.out.bad:Can't initialize the DMAPI
145.out.bad:Can't initialize the DMAPI
146.out.bad:Can't initialize the DMAPI
147.out.bad:Can't initialize the DMAPI
150.out.bad:Can't initialize the DMAPI
155.out.bad:Can't initialize the DMAPI
156.out.bad:Can't initialize the DMAPI
157.out.bad:Can't initialize the DMAPI
158.out.bad:Can't initialize the DMAPI
161.out.bad:Can't initialize the DMAPI
168.out.bad:Can't initialize the DMAPI
175.out.bad:Can't initialize the DMAPI
176.out.bad:Can't initialize the DMAPI
185.out.bad:Can't initialize the DMAPI

This breaks the dmapi mount error detection, and hence whether dmapi
is enabled or not in the kernel. The problem is this:

@@ -251,6 +277,7 @@ _scratch_mount_options()
 _scratch_mount()
 {
     _mount -t $FSTYP `_scratch_mount_options $*`
+    _setup_quota $SCRATCH_MNT
 }
 

means that callers no longer can check is the mount succeeded or not
by looking at the return of _scratch_mount(). Hence this code:

_dmapi_scratch_mount () {
    if [ `echo "$MOUNT_OPTIONS" | grep -c dmapi` -gt 0 -o \
        `echo "$MOUNT_OPTIONS" | grep -c dmi` -gt 0 ] ; then
        #already got dmapi options set
        _scratch_mount
        dmapi_mount_result=$?
    else
        _scratch_mount "-o dmapi,mtpt=$SCRATCH_MNT"
        dmapi_mount_result=$?
    fi

    if [ $dmapi_mount_result -ne 0 ] ; then
        _notrun "Assuming DMAPI modules are not loaded"
    fi
}

now fails to detect that mounts fail.

Can we revert this commit for now? If we really need this
functionality someone can fix the original patch and re-propose it...

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

Re: xfstests: optionally run all tests under quota

[Dave Chinner]

On Fri, Oct 26, 2012 at 11:49:18AM -0500, Rich Johnston wrote:
> On 02/09/2010 01:26 PM, Eric Sandeen wrote:
> >This patch might be a little heavy handed, but it seems to
> >work; if you set USE_QUOTA=1 in your environment, all
> >tests should be run with quota on and enabled.
> >
> >This will hopefully help shake out some of the ext4
> >quota problems, although one needs to keep an eye
> >on the console to see whether warnings scroll by.
> >
> >Signed-off-by: Eric Sandeen <sandeen@redhat.com>
> >
> >---
> >
> >
> >diff --git a/common.rc b/common.rc
> >index 6424871..4fde921 100644
> >--- a/common.rc
> >+++ b/common.rc
> 
> Looks good
> 
> Reviewed-by: Rich Johnston <rjohnston@sgi.com>
> 
> Eric,
> 
> This patch has been committed to
> git://oss.sgi.com/xfs/cmds/xfstests, master branch, commit ID
> edd6bcf9.

And here's the problem with committing 2 year old patches without
review:

$ grep "Can't initialize the DMAPI" [0-9]* | uniq
142.out.bad:Can't initialize the DMAPI
143.out.bad:Can't initialize the DMAPI
144.out.bad:Can't initialize the DMAPI
145.out.bad:Can't initialize the DMAPI
146.out.bad:Can't initialize the DMAPI
147.out.bad:Can't initialize the DMAPI
150.out.bad:Can't initialize the DMAPI
155.out.bad:Can't initialize the DMAPI
156.out.bad:Can't initialize the DMAPI
157.out.bad:Can't initialize the DMAPI
158.out.bad:Can't initialize the DMAPI
161.out.bad:Can't initialize the DMAPI
168.out.bad:Can't initialize the DMAPI
175.out.bad:Can't initialize the DMAPI
176.out.bad:Can't initialize the DMAPI
185.out.bad:Can't initialize the DMAPI

This breaks the dmapi mount error detection, and hence whether dmapi
is enabled or not in the kernel. The problem is this:

@@ -251,6 +277,7 @@ _scratch_mount_options()
 _scratch_mount()
 {
     _mount -t $FSTYP `_scratch_mount_options $*`
+    _setup_quota $SCRATCH_MNT
 }
 

means that callers no longer can check is the mount succeeded or not
by looking at the return of _scratch_mount(). Hence this code:

_dmapi_scratch_mount () {
    if [ `echo "$MOUNT_OPTIONS" | grep -c dmapi` -gt 0 -o \
        `echo "$MOUNT_OPTIONS" | grep -c dmi` -gt 0 ] ; then
        #already got dmapi options set
        _scratch_mount
        dmapi_mount_result=$?
    else
        _scratch_mount "-o dmapi,mtpt=$SCRATCH_MNT"
        dmapi_mount_result=$?
    fi

    if [ $dmapi_mount_result -ne 0 ] ; then
        _notrun "Assuming DMAPI modules are not loaded"
    fi
}

now fails to detect that mounts fail.

Can we revert this commit for now? If we really need this
functionality someone can fix the original patch and re-propose it...

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs