[PATCH V5 0/6] Tools: hv: kvp

[PATCH V5 0/6] Tools: hv: kvp

[K. Y. Srinivasan]

This is a resubmission of the subset of the patches that were not
accepted in an earlier submission. The only change in this patchset
(relative to the previous version - V4) is that the example script
for retrieving DHCP state prints the string "Disabled" to indicate
that DHCP is not enabled. This was based on Greg's feedback.

K. Y. Srinivasan (6):
  Tools: hv: Add an example script to retrieve dhcp state
  Tools: hv: Gather DHCP information
  Tools: hv: Add an example script to configure an interface
  Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
  Tools: hv: Rename the function kvp_get_ip_address()
  Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO

 include/linux/hyperv.h       |    2 +
 tools/hv/hv_get_dhcp_info.sh |   28 ++
 tools/hv/hv_kvp_daemon.c     |  573 +++++++++++++++++++++++++++++++++++++++++-
 tools/hv/hv_set_ifconfig.sh  |   68 +++++
 4 files changed, 665 insertions(+), 6 deletions(-)
 create mode 100755 tools/hv/hv_get_dhcp_info.sh
 create mode 100755 tools/hv/hv_set_ifconfig.sh

-- 
1.7.4.1

[PATCH V5 1/6] Tools: hv: Add an example script to retrieve dhcp state

[K. Y. Srinivasan]

To keep the KVP daemon code free of distro specific details, we invoke an
external script to retrieve the DHCP state. This is an example script that
was used to test the KVP code. This script has to be implemented in a Distro
specific fashion. For instance on distros that ship with Network Manager enabled,
this script can be based on NM APIs.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
 tools/hv/hv_get_dhcp_info.sh |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)
 create mode 100755 tools/hv/hv_get_dhcp_info.sh

diff --git a/tools/hv/hv_get_dhcp_info.sh b/tools/hv/hv_get_dhcp_info.sh
new file mode 100755
index 0000000..ccd3e95
--- /dev/null
+++ b/tools/hv/hv_get_dhcp_info.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# This example script retrieves the DHCP state of a given interface.
+# In the interest of keeping the KVP daemon code free of distro specific
+# information; the kvp daemon code invokes this external script to gather
+# DHCP setting for the specific interface.
+#
+# Input: Name of the interface
+#
+# Output: The script prints the string "Enabled" to stdout to indicate
+#	that DHCP is enabled on the interface. If DHCP is not enabled,
+#	the script prints the string "Disabled" to stdout.
+#
+# Each Distro is expected to implement this script in a distro specific
+# fashion. For instance on Distros that ship with Network Manager enabled,
+# this script can be based on the Network Manager APIs for retrieving DHCP
+# information.
+
+if_file="/etc/sysconfig/network-scripts/ifcfg-"$1
+
+dhcp=$(grep "dhcp" $if_file 2>/dev/null)
+
+if [ "$dhcp" != "" ];
+then
+echo "Enabled"
+else
+echo "Disabled"
+fi
-- 
1.7.4.1

[PATCH V5 2/6] Tools: hv: Gather DHCP information

[K. Y. Srinivasan]

Collect information on dhcp setting for the specified interface.
We invoke an external (Distro specific)  script to get this information.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
 tools/hv/hv_kvp_daemon.c |   31 +++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index cfa23a1..6fb2c1c 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -524,6 +524,9 @@ static void kvp_get_ipconfig_info(char *if_name,
 				 struct hv_kvp_ipaddr_value *buffer)
 {
 	char cmd[512];
+	char dhcp_info[128];
+	char *p;
+	FILE *file;
 
 	/*
 	 * Get the address of default gateway (ipv4).
@@ -572,6 +575,34 @@ static void kvp_get_ipconfig_info(char *if_name,
 	 */
 	kvp_process_ipconfig_file(cmd, (char *)buffer->dns_addr,
 				(MAX_IP_ADDR_SIZE * 2), INET_ADDRSTRLEN, 0);
+
+	/*
+	 * Gather the DHCP state.
+	 * We will gather this state by invoking an external script.
+	 * The parameter to the script is the interface name.
+	 * Here is the expected output:
+	 *
+	 * Enabled: DHCP enabled.
+	 */
+
+	sprintf(cmd, "%s %s", "hv_get_dhcp_info", if_name);
+
+	file = popen(cmd, "r");
+	if (file == NULL)
+		return;
+
+	p = fgets(dhcp_info, sizeof(dhcp_info), file);
+	if (p == NULL) {
+		pclose(file);
+		return;
+	}
+
+	if (!strncmp(p, "Enabled", 7))
+		buffer->dhcp_enabled = 1;
+	else
+		buffer->dhcp_enabled = 0;
+
+	pclose(file);
 }
 
 
-- 
1.7.4.1

[PATCH V5 3/6] Tools: hv: Add an example script to configure an interface

[K. Y. Srinivasan]

To keep the KVP daemon code free of distro specific details, we invoke an
external script to configure the interface. This is an example script that
was used to test the KVP code. This script has to be implemented in a Distro
specific fashion. For instance on distros that ship with Network Manager enabled,
this script can be based on NM APIs.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
 tools/hv/hv_set_ifconfig.sh |   68 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 68 insertions(+), 0 deletions(-)
 create mode 100755 tools/hv/hv_set_ifconfig.sh

diff --git a/tools/hv/hv_set_ifconfig.sh b/tools/hv/hv_set_ifconfig.sh
new file mode 100755
index 0000000..3e9427e
--- /dev/null
+++ b/tools/hv/hv_set_ifconfig.sh
@@ -0,0 +1,68 @@
+#!/bin/bash
+
+# This example script activates an interface based on the specified
+# configuration.
+#
+# In the interest of keeping the KVP daemon code free of distro specific
+# information; the kvp daemon code invokes this external script to configure
+# the interface.
+#
+# The only argument to this script is the configuration file that is to
+# be used to configure the interface.
+#
+# Each Distro is expected to implement this script in a distro specific
+# fashion. For instance on Distros that ship with Network Manager enabled,
+# this script can be based on the Network Manager APIs for configuring the
+# interface.
+#
+# This example script is based on a RHEL environment.
+#
+# Here is the format of the ip configuration file:
+#
+# HWADDR=macaddr
+# IF_NAME=interface name
+# DHCP=yes (This is optional; if yes, DHCP is configured)
+#
+# IPADDR=ipaddr1
+# IPADDR_1=ipaddr2
+# IPADDR_x=ipaddry (where y = x + 1)
+#
+# NETMASK=netmask1
+# NETMASK_x=netmasky (where y = x + 1)
+#
+# GATEWAY=ipaddr1
+# GATEWAY_x=ipaddry (where y = x + 1)
+#
+# DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc)
+#
+# IPV6 addresses will be tagged as IPV6ADDR, IPV6 gateway will be
+# tagged as IPV6_DEFAULTGW and IPV6 NETMASK will be tagged as
+# IPV6NETMASK.
+#
+# The host can specify multiple ipv4 and ipv6 addresses to be
+# configured for the interface. Furthermore, the configuration
+# needs to be persistent. A subsequent GET call on the interface
+# is expected to return the configuration that is set via the SET
+# call.
+#
+
+
+
+echo "IPV6INIT=yes" >> $1
+echo "NM_CONTROLLED=no" >> $1
+echo "PEERDNS=yes" >> $1
+echo "ONBOOT=yes" >> $1
+
+dhcp=$(grep "DHCP" $1 2>/dev/null)
+if [ "$dhcp" != "" ];
+then
+echo "BOOTPROTO=dhcp" >> $1;
+fi
+
+cp $1 /etc/sysconfig/network-scripts/
+
+
+interface=$(echo $1 | awk -F - '{ print $2 }')
+
+/sbin/ifdown $interface 2>/dev/null
+/sbin/ifup $interfac 2>/dev/null
-- 
1.7.4.1

Re: [PATCH V5 3/6] Tools: hv: Add an example script to configure an interface

[Olaf Hering]

On Wed, Sep 05, K. Y. Srinivasan wrote:

> To keep the KVP daemon code free of distro specific details, we invoke an
> external script to configure the interface. This is an example script that
> was used to test the KVP code. This script has to be implemented in a Distro
> specific fashion. For instance on distros that ship with Network Manager enabled,
> this script can be based on NM APIs.
> 
> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
> ---
>  tools/hv/hv_set_ifconfig.sh |   68 +++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 68 insertions(+), 0 deletions(-)
>  create mode 100755 tools/hv/hv_set_ifconfig.sh

This already went in, but I overlooked this part:

> +# GATEWAY=ipaddr1

I guest GATEWAY means the default gateway.

> +# GATEWAY_x=ipaddry (where y = x + 1)

How can there be multiple gateways?
Or: What does GATEWAY_n mean here?

Olaf

RE: [PATCH V5 3/6] Tools: hv: Add an example script to configure an interface

[KY Srinivasan]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1772 bytes --]



> -----Original Message-----
> From: Olaf Hering [mailto:olaf@aepfle.de]
> Sent: Thursday, November 22, 2012 4:13 PM
> To: KY Srinivasan
> Cc: gregkh@linuxfoundation.org; linux-kernel@vger.kernel.org;
> devel@linuxdriverproject.org; apw@canonical.com; ben@decadent.org.uk;
> thozza@redhat.com; dcbw@redhat.com
> Subject: Re: [PATCH V5 3/6] Tools: hv: Add an example script to configure an
> interface
> 
> On Wed, Sep 05, K. Y. Srinivasan wrote:
> 
> > To keep the KVP daemon code free of distro specific details, we invoke an
> > external script to configure the interface. This is an example script that
> > was used to test the KVP code. This script has to be implemented in a Distro
> > specific fashion. For instance on distros that ship with Network Manager
> enabled,
> > this script can be based on NM APIs.
> >
> > Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
> > Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
> > ---
> >  tools/hv/hv_set_ifconfig.sh |   68
> +++++++++++++++++++++++++++++++++++++++++++
> >  1 files changed, 68 insertions(+), 0 deletions(-)
> >  create mode 100755 tools/hv/hv_set_ifconfig.sh
> 
> This already went in, but I overlooked this part:
> 
> > +# GATEWAY=ipaddr1
> 
> I guest GATEWAY means the default gateway.
> 
> > +# GATEWAY_x=ipaddry (where y = x + 1)
> 
> How can there be multiple gateways?
> Or: What does GATEWAY_n mean here?
> 
Olaf,

On windows, we can support multiple default gateways (I think). This is 
really implementing the host protocol. Minimally we can have an ipv4 default
and an ipv6 default gateway.

Hope this helps,

Regards,

K. Y

ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

[PATCH V5 4/6] Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO

[K. Y. Srinivasan]

Implement the KVP verb - KVP_OP_SET_IP_INFO. This operation configures the
specified interface based on the given configuration. Since configuring
an interface is very distro specific, we invoke an external (Distro specific)
script to configure the interface.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
 include/linux/hyperv.h   |    2 +
 tools/hv/hv_kvp_daemon.c |  443 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 445 insertions(+), 0 deletions(-)

diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 7585d55..e73b852 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -191,6 +191,8 @@ enum hv_kvp_exchg_pool {
 #define HV_ERROR_NOT_SUPPORTED		0x80070032
 #define HV_ERROR_MACHINE_LOCKED		0x800704F7
 #define HV_ERROR_DEVICE_NOT_CONNECTED	0x8007048F
+#define HV_INVALIDARG			0x80070057
+#define HV_GUID_NOTFOUND		0x80041002
 
 #define ADDR_FAMILY_NONE	0x00
 #define ADDR_FAMILY_IPV4	0x01
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 6fb2c1c..ac144b9 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -31,6 +31,7 @@
 #include <stdlib.h>
 #include <unistd.h>
 #include <string.h>
+#include <ctype.h>
 #include <errno.h>
 #include <arpa/inet.h>
 #include <linux/connector.h>
@@ -41,6 +42,7 @@
 #include <syslog.h>
 #include <sys/stat.h>
 #include <fcntl.h>
+#include <dirent.h>
 
 /*
  * KVP protocol: The user mode component first registers with the
@@ -68,6 +70,14 @@ enum key_index {
 	ProcessorArchitecture
 };
 
+
+enum {
+	IPADDR = 0,
+	NETMASK,
+	GATEWAY,
+	DNS
+};
+
 static char kvp_send_buffer[4096];
 static char kvp_recv_buffer[4096 * 2];
 static struct sockaddr_nl addr;
@@ -81,6 +91,11 @@ static char *os_build;
 static char *lic_version = "Unknown version";
 static struct utsname uts_buf;
 
+/*
+ * The location of the interface configuration file.
+ */
+
+#define KVP_CONFIG_LOC	"/var/opt/"
 
 #define MAX_FILE_NAME 100
 #define ENTRIES_PER_BLOCK 50
@@ -490,6 +505,104 @@ done:
 	return;
 }
 
+
+
+/*
+ * Retrieve an interface name corresponding to the specified guid.
+ * If there is a match, the function returns a pointer
+ * to the interface name and if not, a NULL is returned.
+ * If a match is found, the caller is responsible for
+ * freeing the memory.
+ */
+
+static char *kvp_get_if_name(char *guid)
+{
+	DIR *dir;
+	struct dirent *entry;
+	FILE    *file;
+	char    *p, *q, *x;
+	char    *if_name = NULL;
+	char    buf[256];
+	char *kvp_net_dir = "/sys/class/net/";
+	char dev_id[256];
+
+	dir = opendir(kvp_net_dir);
+	if (dir == NULL)
+		return NULL;
+
+	snprintf(dev_id, sizeof(dev_id), "%s", kvp_net_dir);
+	q = dev_id + strlen(kvp_net_dir);
+
+	while ((entry = readdir(dir)) != NULL) {
+		/*
+		 * Set the state for the next pass.
+		 */
+		*q = '\0';
+		strcat(dev_id, entry->d_name);
+		strcat(dev_id, "/device/device_id");
+
+		file = fopen(dev_id, "r");
+		if (file == NULL)
+			continue;
+
+		p = fgets(buf, sizeof(buf), file);
+		if (p) {
+			x = strchr(p, '\n');
+			if (x)
+				*x = '\0';
+
+			if (!strcmp(p, guid)) {
+				/*
+				 * Found the guid match; return the interface
+				 * name. The caller will free the memory.
+				 */
+				if_name = strdup(entry->d_name);
+				fclose(file);
+				break;
+			}
+		}
+		fclose(file);
+	}
+
+	closedir(dir);
+	return if_name;
+}
+
+/*
+ * Retrieve the MAC address given the interface name.
+ */
+
+static char *kvp_if_name_to_mac(char *if_name)
+{
+	FILE    *file;
+	char    *p, *x;
+	char    buf[256];
+	char addr_file[256];
+	int i;
+	char *mac_addr = NULL;
+
+	snprintf(addr_file, sizeof(addr_file), "%s%s%s", "/sys/class/net/",
+		if_name, "/address");
+
+	file = fopen(addr_file, "r");
+	if (file == NULL)
+		return NULL;
+
+	p = fgets(buf, sizeof(buf), file);
+	if (p) {
+		x = strchr(p, '\n');
+		if (x)
+			*x = '\0';
+		for (i = 0; i < strlen(p); i++)
+			p[i] = toupper(p[i]);
+		mac_addr = strdup(p);
+	}
+
+	fclose(file);
+	return mac_addr;
+}
+
+
 static void kvp_process_ipconfig_file(char *cmd,
 					char *config_buf, int len,
 					int element_size, int offset)
@@ -790,6 +903,315 @@ getaddr_done:
 }
 
 
+static int expand_ipv6(char *addr, int type)
+{
+	int ret;
+	struct in6_addr v6_addr;
+
+	ret = inet_pton(AF_INET6, addr, &v6_addr);
+
+	if (ret != 1) {
+		if (type == NETMASK)
+			return 1;
+		return 0;
+	}
+
+	sprintf(addr, "%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:"
+		"%02x%02x:%02x%02x:%02x%02x",
+		(int)v6_addr.s6_addr[0], (int)v6_addr.s6_addr[1],
+		(int)v6_addr.s6_addr[2], (int)v6_addr.s6_addr[3],
+		(int)v6_addr.s6_addr[4], (int)v6_addr.s6_addr[5],
+		(int)v6_addr.s6_addr[6], (int)v6_addr.s6_addr[7],
+		(int)v6_addr.s6_addr[8], (int)v6_addr.s6_addr[9],
+		(int)v6_addr.s6_addr[10], (int)v6_addr.s6_addr[11],
+		(int)v6_addr.s6_addr[12], (int)v6_addr.s6_addr[13],
+		(int)v6_addr.s6_addr[14], (int)v6_addr.s6_addr[15]);
+
+	return 1;
+
+}
+
+static int is_ipv4(char *addr)
+{
+	int ret;
+	struct in_addr ipv4_addr;
+
+	ret = inet_pton(AF_INET, addr, &ipv4_addr);
+
+	if (ret == 1)
+		return 1;
+	return 0;
+}
+
+static int parse_ip_val_buffer(char *in_buf, int *offset,
+				char *out_buf, int out_len)
+{
+	char *x;
+	char *start;
+
+	/*
+	 * in_buf has sequence of characters that are seperated by
+	 * the character ';'. The last sequence does not have the
+	 * terminating ";" character.
+	 */
+	start = in_buf + *offset;
+
+	x = strchr(start, ';');
+	if (x)
+		*x = 0;
+	else
+		x = start + strlen(start);
+
+	if (strlen(start) != 0) {
+		int i = 0;
+		/*
+		 * Get rid of leading spaces.
+		 */
+		while (start[i] == ' ')
+			i++;
+
+		if ((x - start) <= out_len) {
+			strcpy(out_buf, (start + i));
+			*offset += (x - start) + 1;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int kvp_write_file(FILE *f, char *s1, char *s2, char *s3)
+{
+	int ret;
+
+	ret = fprintf(f, "%s%s%s%s\n", s1, s2, "=", s3);
+
+	if (ret < 0)
+		return HV_E_FAIL;
+
+	return 0;
+}
+
+
+static int process_ip_string(FILE *f, char *ip_string, int type)
+{
+	int error = 0;
+	char addr[INET6_ADDRSTRLEN];
+	int i = 0;
+	int j = 0;
+	char str[256];
+	char sub_str[10];
+	int offset = 0;
+
+	memset(addr, 0, sizeof(addr));
+
+	while (parse_ip_val_buffer(ip_string, &offset, addr,
+					(MAX_IP_ADDR_SIZE * 2))) {
+
+		sub_str[0] = 0;
+		if (is_ipv4(addr)) {
+			switch (type) {
+			case IPADDR:
+				snprintf(str, sizeof(str), "%s", "IPADDR");
+				break;
+			case NETMASK:
+				snprintf(str, sizeof(str), "%s", "NETMASK");
+				break;
+			case GATEWAY:
+				snprintf(str, sizeof(str), "%s", "GATEWAY");
+				break;
+			case DNS:
+				snprintf(str, sizeof(str), "%s", "DNS");
+				break;
+			}
+			if (i != 0) {
+				if (type != DNS) {
+					snprintf(sub_str, sizeof(sub_str),
+						"_%d", i++);
+				} else {
+					snprintf(sub_str, sizeof(sub_str),
+						"%d", ++i);
+				}
+			} else if (type == DNS) {
+				snprintf(sub_str, sizeof(sub_str), "%d", ++i);
+			}
+
+
+		} else if (expand_ipv6(addr, type)) {
+			switch (type) {
+			case IPADDR:
+				snprintf(str, sizeof(str), "%s", "IPV6ADDR");
+				break;
+			case NETMASK:
+				snprintf(str, sizeof(str), "%s", "IPV6NETMASK");
+				break;
+			case GATEWAY:
+				snprintf(str, sizeof(str), "%s",
+					"IPV6_DEFAULTGW");
+				break;
+			case DNS:
+				snprintf(str, sizeof(str), "%s",  "DNS");
+				break;
+			}
+			if ((j != 0) || (type == DNS)) {
+				if (type != DNS) {
+					snprintf(sub_str, sizeof(sub_str),
+						"_%d", j++);
+				} else {
+					snprintf(sub_str, sizeof(sub_str),
+						"%d", ++i);
+				}
+			} else if (type == DNS) {
+				snprintf(sub_str, sizeof(sub_str),
+					"%d", ++i);
+			}
+		} else {
+			return  HV_INVALIDARG;
+		}
+
+		error = kvp_write_file(f, str, sub_str, addr);
+		if (error)
+			return error;
+		memset(addr, 0, sizeof(addr));
+	}
+
+	return 0;
+}
+
+static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+{
+	int error = 0;
+	char if_file[128];
+	FILE *file;
+	char cmd[512];
+	char *mac_addr;
+
+	/*
+	 * Set the configuration for the specified interface with
+	 * the information provided. Since there is no standard
+	 * way to configure an interface, we will have an external
+	 * script that does the job of configuring the interface and
+	 * flushing the configuration.
+	 *
+	 * The parameters passed to this external script are:
+	 * 1. A configuration file that has the specified configuration.
+	 *
+	 * We will embed the name of the interface in the configuration
+	 * file: ifcfg-ethx (where ethx is the interface name).
+	 *
+	 * The information provided here may be more than what is needed
+	 * in a given distro to configure the interface and so are free
+	 * ignore information that may not be relevant.
+	 *
+	 * Here is the format of the ip configuration file:
+	 *
+	 * HWADDR=macaddr
+	 * IF_NAME=interface name
+	 * DHCP=yes (This is optional; if yes, DHCP is configured)
+	 *
+	 * IPADDR=ipaddr1
+	 * IPADDR_1=ipaddr2
+	 * IPADDR_x=ipaddry (where y = x + 1)
+	 *
+	 * NETMASK=netmask1
+	 * NETMASK_x=netmasky (where y = x + 1)
+	 *
+	 * GATEWAY=ipaddr1
+	 * GATEWAY_x=ipaddry (where y = x + 1)
+	 *
+	 * DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc)
+	 *
+	 * IPV6 addresses will be tagged as IPV6ADDR, IPV6 gateway will be
+	 * tagged as IPV6_DEFAULTGW and IPV6 NETMASK will be tagged as
+	 * IPV6NETMASK.
+	 *
+	 * The host can specify multiple ipv4 and ipv6 addresses to be
+	 * configured for the interface. Furthermore, the configuration
+	 * needs to be persistent. A subsequent GET call on the interface
+	 * is expected to return the configuration that is set via the SET
+	 * call.
+	 */
+
+	snprintf(if_file, sizeof(if_file), "%s%s%s", KVP_CONFIG_LOC,
+		"hyperv/ifcfg-", if_name);
+
+	file = fopen(if_file, "w");
+
+	if (file == NULL) {
+		syslog(LOG_ERR, "Failed to open config file");
+		return HV_E_FAIL;
+	}
+
+	/*
+	 * First write out the MAC address.
+	 */
+
+	mac_addr = kvp_if_name_to_mac(if_name);
+	if (mac_addr == NULL) {
+		error = HV_E_FAIL;
+		goto setval_error;
+	}
+
+	error = kvp_write_file(file, "HWADDR", "", mac_addr);
+	if (error)
+		goto setval_error;
+
+	error = kvp_write_file(file, "IF_NAME", "", if_name);
+	if (error)
+		goto setval_error;
+
+	if (new_val->dhcp_enabled) {
+		error = kvp_write_file(file, "DHCP", "", "yes");
+		if (error)
+			goto setval_error;
+
+		/*
+		 * We are done!.
+		 */
+		goto setval_done;
+	}
+
+	/*
+	 * Write the configuration for ipaddress, netmask, gateway and
+	 * name servers.
+	 */
+
+	error = process_ip_string(file, (char *)new_val->ip_addr, IPADDR);
+	if (error)
+		goto setval_error;
+
+	error = process_ip_string(file, (char *)new_val->sub_net, NETMASK);
+	if (error)
+		goto setval_error;
+
+	error = process_ip_string(file, (char *)new_val->gate_way, GATEWAY);
+	if (error)
+		goto setval_error;
+
+	error = process_ip_string(file, (char *)new_val->dns_addr, DNS);
+	if (error)
+		goto setval_error;
+
+setval_done:
+	free(mac_addr);
+	fclose(file);
+
+	/*
+	 * Now that we have populated the configuration file,
+	 * invoke the external script to do its magic.
+	 */
+
+	snprintf(cmd, sizeof(cmd), "%s %s", "hv_set_ifconfig", if_file);
+	system(cmd);
+	return 0;
+
+setval_error:
+	syslog(LOG_ERR, "Failed to write config file");
+	free(mac_addr);
+	fclose(file);
+	return error;
+}
+
+
 static int
 kvp_get_domain_name(char *buffer, int length)
 {
@@ -859,6 +1281,8 @@ int main(void)
 	char	*key_name;
 	int	op;
 	int	pool;
+	char	*if_name;
+	struct hv_kvp_ipaddr_value *kvp_ip_val;
 
 	daemon(1, 0);
 	openlog("KVP", 0, LOG_USER);
@@ -962,6 +1386,25 @@ int main(void)
 		}
 
 		switch (op) {
+		case KVP_OP_SET_IP_INFO:
+			kvp_ip_val = &hv_msg->body.kvp_ip_val;
+			if_name = kvp_get_if_name(
+					(char *)kvp_ip_val->adapter_id);
+			if (if_name == NULL) {
+				/*
+				 * We could not map the guid to an
+				 * interface name; return error.
+				 */
+				hv_msg->error = HV_GUID_NOTFOUND;
+				break;
+			}
+			error = kvp_set_ip_info(if_name, kvp_ip_val);
+			if (error)
+				hv_msg->error = error;
+
+			free(if_name);
+			break;
+
 		case KVP_OP_SET:
 			if (kvp_key_add_or_modify(pool,
 					hv_msg->body.kvp_set.data.key,
-- 
1.7.4.1

[PATCH V5 5/6] Tools: hv: Rename the function kvp_get_ip_address()

[K. Y. Srinivasan]

Rename the function kvp_get_ip_address() to better reflect the functionality
being implemented.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
 tools/hv/hv_kvp_daemon.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index ac144b9..849c438 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -765,7 +765,7 @@ static int kvp_process_ip_address(void *addrp,
 }
 
 static int
-kvp_get_ip_address(int family, char *if_name, int op,
+kvp_get_ip_info(int family, char *if_name, int op,
 		 void  *out_buffer, int length)
 {
 	struct ifaddrs *ifap;
@@ -1468,12 +1468,12 @@ int main(void)
 			strcpy(key_value, lic_version);
 			break;
 		case NetworkAddressIPv4:
-			kvp_get_ip_address(AF_INET, NULL, KVP_OP_ENUMERATE,
+			kvp_get_ip_info(AF_INET, NULL, KVP_OP_ENUMERATE,
 				key_value, HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
 			strcpy(key_name, "NetworkAddressIPv4");
 			break;
 		case NetworkAddressIPv6:
-			kvp_get_ip_address(AF_INET6, NULL, KVP_OP_ENUMERATE,
+			kvp_get_ip_info(AF_INET6, NULL, KVP_OP_ENUMERATE,
 				key_value, HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
 			strcpy(key_name, "NetworkAddressIPv6");
 			break;
-- 
1.7.4.1

[PATCH V5 6/6] Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO

[K. Y. Srinivasan]

Now implement the KVP verb - KVP_OP_GET_IP_INFO. This operation retrieves IP
information for the specified interface.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
 tools/hv/hv_kvp_daemon.c |   93 ++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 90 insertions(+), 3 deletions(-)

diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 849c438..c8e1013 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -603,6 +603,69 @@ static char *kvp_if_name_to_mac(char *if_name)
 }
 
 
+/*
+ * Retrieve the interface name given tha MAC address.
+ */
+
+static char *kvp_mac_to_if_name(char *mac)
+{
+	DIR *dir;
+	struct dirent *entry;
+	FILE    *file;
+	char    *p, *q, *x;
+	char    *if_name = NULL;
+	char    buf[256];
+	char *kvp_net_dir = "/sys/class/net/";
+	char dev_id[256];
+	int i;
+
+	dir = opendir(kvp_net_dir);
+	if (dir == NULL)
+		return NULL;
+
+	snprintf(dev_id, sizeof(dev_id), kvp_net_dir);
+	q = dev_id + strlen(kvp_net_dir);
+
+	while ((entry = readdir(dir)) != NULL) {
+		/*
+		 * Set the state for the next pass.
+		 */
+		*q = '\0';
+
+		strcat(dev_id, entry->d_name);
+		strcat(dev_id, "/address");
+
+		file = fopen(dev_id, "r");
+		if (file == NULL)
+			continue;
+
+		p = fgets(buf, sizeof(buf), file);
+		if (p) {
+			x = strchr(p, '\n');
+			if (x)
+				*x = '\0';
+
+			for (i = 0; i < strlen(p); i++)
+				p[i] = toupper(p[i]);
+
+			if (!strcmp(p, mac)) {
+				/*
+				 * Found the MAC match; return the interface
+				 * name. The caller will free the memory.
+				 */
+				if_name = strdup(entry->d_name);
+				fclose(file);
+				break;
+			}
+		}
+		fclose(file);
+	}
+
+	closedir(dir);
+	return if_name;
+}
+
+
 static void kvp_process_ipconfig_file(char *cmd,
 					char *config_buf, int len,
 					int element_size, int offset)
@@ -749,10 +812,10 @@ static int kvp_process_ip_address(void *addrp,
 	}
 
 	if ((length - *offset) < addr_length + 1)
-		return 1;
+		return HV_E_FAIL;
 	if (str == NULL) {
 		strcpy(buffer, "inet_ntop failed\n");
-		return 1;
+		return HV_E_FAIL;
 	}
 	if (*offset == 0)
 		strcpy(buffer, tmp);
@@ -796,7 +859,7 @@ kvp_get_ip_info(int family, char *if_name, int op,
 
 	if (getifaddrs(&ifap)) {
 		strcpy(buffer, "getifaddrs failed\n");
-		return 1;
+		return HV_E_FAIL;
 	}
 
 	curp = ifap;
@@ -1386,6 +1449,30 @@ int main(void)
 		}
 
 		switch (op) {
+		case KVP_OP_GET_IP_INFO:
+			kvp_ip_val = &hv_msg->body.kvp_ip_val;
+			if_name =
+			kvp_mac_to_if_name((char *)kvp_ip_val->adapter_id);
+
+			if (if_name == NULL) {
+				/*
+				 * We could not map the mac address to an
+				 * interface name; return error.
+				 */
+				hv_msg->error = HV_E_FAIL;
+				break;
+			}
+			error = kvp_get_ip_info(
+						0, if_name, KVP_OP_GET_IP_INFO,
+						kvp_ip_val,
+						(MAX_IP_ADDR_SIZE * 2));
+
+			if (error)
+				hv_msg->error = error;
+
+			free(if_name);
+			break;
+
 		case KVP_OP_SET_IP_INFO:
 			kvp_ip_val = &hv_msg->body.kvp_ip_val;
 			if_name = kvp_get_if_name(
-- 
1.7.4.1