From: Marcelo Tosatti <mtosatti@redhat.com>
To: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>, LKML <linux-kernel@vger.kernel.org>,
KVM <kvm@vger.kernel.org>
Subject: Re: [PATCH 0/3] KVM: x86: improve reexecute_instruction
Date: Thu, 22 Nov 2012 23:16:26 -0200 [thread overview]
Message-ID: <20121123011625.GC9269@amt.cnet> (raw)
In-Reply-To: <50AAC77C.8040505@linux.vnet.ibm.com>
On Tue, Nov 20, 2012 at 07:57:48AM +0800, Xiao Guangrong wrote:
> The current reexecute_instruction can not well detect the failed instruction
> emulation. It allows guest to retry all the instructions except it accesses
> on error pfn.
>
> For example, these cases can not be detected:
> - for tdp used
> currently, it refused to retry all instructions. If nested npt is used, the
> emulation may be caused by shadow page, it can be fixed by unshadow the
> shadow page.
>
> - for shadow mmu
> some cases are nested-write-protect, for example, if the page we want to
> write is used as PDE but it chains to itself. Under this case, we should
> stop the emulation and report the case to userspace.
>
> This test case based on kvm-unit-test can trigger a infinite loop on current
> code (ept = 0), after this patchset, it can report the error to Qemu.
>
> Marcelo, I am afraid this test case can not be putted on kvm-unit-test,
> autotest is confused about this case since it can abort Qemu.
That is OK, kvm-unit-test only executes tests listed at
x86/unittests.cfg.
>
> Subject: [PATCH] access test: test unhandleable instruction
>
> Test the instruction which can not be handled by kvm
>
> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
> ---
> x86/access.c | 27 ++++++++++++++++++++++++++-
> 1 files changed, 26 insertions(+), 1 deletions(-)
>
> diff --git a/x86/access.c b/x86/access.c
> index 23a5995..e88db6b 100644
> --- a/x86/access.c
> +++ b/x86/access.c
> @@ -2,6 +2,7 @@
> #include "libcflat.h"
> #include "desc.h"
> #include "processor.h"
> +#include "vm.h"
>
> #define smp_id() 0
>
> @@ -739,6 +740,28 @@ err:
> return 0;
> }
>
> +static int check_retry_unhandleable_ins(ac_pool_t *pool)
> +{
> + unsigned long mem = 30 * 1024 * 1024;
> + unsigned long esp;
> + ac_test_t at;
> +
> + ac_test_init(&at, (void *)(0x123406003000));
> + at.flags[AC_PDE_PRESENT] = at.flags[AC_PDE_WRITABLE] = 1;
> + at.flags[AC_PTE_PRESENT] = at.flags[AC_PTE_WRITABLE] = 1;
> + at.flags[AC_CPU_CR0_WP] = 1;
> +
> + at.phys = mem;
> + ac_setup_specific_pages(&at, pool, mem, 0);
> +
> + asm volatile("mov %%rsp, %%rax \n\t" : "=a"(esp));
> + asm volatile("mov %%rax, %%rsp \n\t" : : "a"(0x123406003000 + 0xf0));
> + asm volatile ("int $0x3 \n\t");
> + asm volatile("mov %%rax, %%rsp \n\t" : : "a"(esp));
> +
> + return 1;
> +}
> +
> int ac_test_exec(ac_test_t *at, ac_pool_t *pool)
> {
> int r;
> @@ -756,7 +779,8 @@ const ac_test_fn ac_test_cases[] =
> {
> corrupt_hugepage_triger,
> check_pfec_on_prefetch_pte,
> - check_smep_andnot_wp
> + check_smep_andnot_wp,
> + check_retry_unhandleable_ins
> };
>
> int ac_test_run(void)
> @@ -770,6 +794,7 @@ int ac_test_run(void)
> tests = successes = 0;
> ac_env_int(&pool);
> ac_test_init(&at, (void *)(0x123400000000 + 16 * smp_id()));
> +
> do {
> if (at.flags[AC_CPU_CR4_SMEP] && (ptl2[2] & 0x4))
> ptl2[2] -= 0x4;
> --
> 1.7.7.6
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2012-11-23 1:16 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-19 23:57 [PATCH 0/3] KVM: x86: improve reexecute_instruction Xiao Guangrong
2012-11-19 23:58 ` [PATCH 1/3] KVM: x86: clean up reexecute_instruction Xiao Guangrong
2012-11-20 12:11 ` Gleb Natapov
2012-11-20 20:13 ` Xiao Guangrong
2012-11-19 23:59 ` [PATCH 2/3] KVM: x86: let reexecute_instruction work for tdp Xiao Guangrong
2012-11-26 22:37 ` Marcelo Tosatti
2012-11-27 3:13 ` Xiao Guangrong
2012-11-27 23:32 ` Marcelo Tosatti
2012-11-28 3:15 ` Xiao Guangrong
2012-11-28 14:01 ` Gleb Natapov
2012-11-28 14:55 ` Xiao Guangrong
2012-11-28 22:07 ` Marcelo Tosatti
2012-11-19 23:59 ` [PATCH 3/3] KVM: x86: improve reexecute_instruction Xiao Guangrong
2012-11-26 22:41 ` Marcelo Tosatti
2012-11-27 3:30 ` Xiao Guangrong
2012-11-27 23:42 ` Marcelo Tosatti
2012-11-28 3:33 ` Xiao Guangrong
2012-11-28 14:12 ` Gleb Natapov
2012-11-28 14:59 ` Xiao Guangrong
2012-11-28 21:57 ` Marcelo Tosatti
2012-11-28 22:40 ` Xiao Guangrong
2012-11-28 23:16 ` Xiao Guangrong
2012-11-29 0:23 ` Marcelo Tosatti
2012-11-29 0:21 ` Marcelo Tosatti
2012-12-03 8:33 ` Xiao Guangrong
2012-12-03 19:47 ` Marcelo Tosatti
2012-11-23 1:16 ` Marcelo Tosatti [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121123011625.GC9269@amt.cnet \
--to=mtosatti@redhat.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=xiaoguangrong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.