Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Gary Thomas]

When trying to build this recipe, I get this error:

configure: error: Package requirements (xorg-server >= 1.3 xproto fontsproto libdrm >= 2.4.36 libdrm_omap xf86driproto  randrproto renderproto videoproto xextproto) were not met:
No package 'libdrm_omap' found

Where can I find this package?

Thanks

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Denys Dmytriyenko]

http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196

On Wed, Nov 28, 2012 at 10:18:10AM -0700, Gary Thomas wrote:
> When trying to build this recipe, I get this error:
> 
> configure: error: Package requirements (xorg-server >= 1.3 xproto fontsproto libdrm >= 2.4.36 libdrm_omap xf86driproto  randrproto renderproto videoproto xextproto) were not met:
> No package 'libdrm_omap' found
> 
> Where can I find this package?
> 
> Thanks
> 
> -- 
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Gary Thomas]

On 2012-11-28 10:19, Denys Dmytriyenko wrote:
> http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196

Bottom line: I should just use the latest Poky/Yocto tree?  I just updated
the meta-ti(master) and the quoted patches don't seem to have been applied
(the xf86-video-omap_git.bb is still present)

>
> On Wed, Nov 28, 2012 at 10:18:10AM -0700, Gary Thomas wrote:
>> When trying to build this recipe, I get this error:
>>
>> configure: error: Package requirements (xorg-server >= 1.3 xproto fontsproto libdrm >= 2.4.36 libdrm_omap xf86driproto  randrproto renderproto videoproto xextproto) were not met:
>> No package 'libdrm_omap' found
>>
>> Where can I find this package?
>>
>> Thanks

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Nicolas Dechesne]

[-- Attachment #1: Type: text/plain, Size: 1333 bytes --]

Le 28 nov. 2012 18:28, "Gary Thomas" <gary@mlbassoc.com> a écrit :
>
> On 2012-11-28 10:19, Denys Dmytriyenko wrote:
>>
>> http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196
>
>
> Bottom line: I should just use the latest Poky/Yocto tree?  I just updated
> the meta-ti(master) and the quoted patches don't seem to have been applied
> (the xf86-video-omap_git.bb is still present)
>

Indeed you need to apply them for now. Denys should be merging them soon.
But a tested-by won't hurt...

>
>>
>> On Wed, Nov 28, 2012 at 10:18:10AM -0700, Gary Thomas wrote:
>>>
>>> When trying to build this recipe, I get this error:
>>>
>>> configure: error: Package requirements (xorg-server >= 1.3 xproto
fontsproto libdrm >= 2.4.36 libdrm_omap xf86driproto  randrproto
renderproto videoproto xextproto) were not met:
>>> No package 'libdrm_omap' found
>>>
>>> Where can I find this package?
>>>
>>> Thanks
>
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti

[-- Attachment #2: Type: text/html, Size: 1964 bytes --]

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Denys Dmytriyenko]

On Wed, Nov 28, 2012 at 06:31:17PM +0100, Nicolas Dechesne wrote:
> Le 28 nov. 2012 18:28, "Gary Thomas" <gary@mlbassoc.com> a ?crit :
> >
> > On 2012-11-28 10:19, Denys Dmytriyenko wrote:
> >>
> >> http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196
> >
> >
> > Bottom line: I should just use the latest Poky/Yocto tree?  I just updated
> > the meta-ti(master) and the quoted patches don't seem to have been applied
> > (the xf86-video-omap_git.bb is still present)
> >
> 
> Indeed you need to apply them for now. Denys should be merging them soon.
> But a tested-by won't hurt...

They just been merged. Had a slight delay testing the master branch - too much 
time spent dealing with denzil-based releases here from multiple teams... :(

-- 
Denys

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Nicolas Dechesne]

[-- Attachment #1: Type: text/plain, Size: 1101 bytes --]

Le 28 nov. 2012 18:34, "Denys Dmytriyenko" <denys@ti.com> a écrit :
>
> On Wed, Nov 28, 2012 at 06:31:17PM +0100, Nicolas Dechesne wrote:
> > Le 28 nov. 2012 18:28, "Gary Thomas" <gary@mlbassoc.com> a ?crit :
> > >
> > > On 2012-11-28 10:19, Denys Dmytriyenko wrote:
> > >>
> > >> http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196
> > >
> > >
> > > Bottom line: I should just use the latest Poky/Yocto tree?  I just
updated
> > > the meta-ti(master) and the quoted patches don't seem to have been
applied
> > > (the xf86-video-omap_git.bb is still present)
> > >
> >
> > Indeed you need to apply them for now. Denys should be merging them
soon.
> > But a tested-by won't hurt...
>
> They just been merged. Had a slight delay testing the master branch - too
much
> time spent dealing with denzil-based releases here from multiple teams...
:(
>

No problem. Thx. So now both poky master and danny should work on panda
with meta-ti BSP layer (master and danny branch respectively). And both
with 3.4 kernel, omapdrm driver and x11 video-omap.

> --
> Denys

[-- Attachment #2: Type: text/html, Size: 1590 bytes --]

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Gary Thomas]

On 2012-11-28 10:34, Denys Dmytriyenko wrote:
> On Wed, Nov 28, 2012 at 06:31:17PM +0100, Nicolas Dechesne wrote:
>> Le 28 nov. 2012 18:28, "Gary Thomas" <gary@mlbassoc.com> a ?crit :
>>>
>>> On 2012-11-28 10:19, Denys Dmytriyenko wrote:
>>>>
>>>> http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196
>>>
>>>
>>> Bottom line: I should just use the latest Poky/Yocto tree?  I just updated
>>> the meta-ti(master) and the quoted patches don't seem to have been applied
>>> (the xf86-video-omap_git.bb is still present)
>>>
>>
>> Indeed you need to apply them for now. Denys should be merging them soon.
>> But a tested-by won't hurt...
>
> They just been merged. Had a slight delay testing the master branch - too much
> time spent dealing with denzil-based releases here from multiple teams... :(

Sadly, it's still breaking when I build using the latest:

checking whether to include DRI support... checking for /usr/include/xorg/dri.h... configure: error: cannot check for file existence when cross compiling
Configure failed. The contents of all config.log files follows to aid debugging
/home/local/p82_poky/tmp/work/armv7ahf-vfp-neon-amltd-linux-gnueabi/xf86-video-omap/2_0.4.2+gitr9+653ccadb38c87be565df3fbf2ff24a0cbe5a5e98-r20.1/git/config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Denys Dmytriyenko]

On Wed, Nov 28, 2012 at 12:58:23PM -0700, Gary Thomas wrote:
> On 2012-11-28 10:34, Denys Dmytriyenko wrote:
> >On Wed, Nov 28, 2012 at 06:31:17PM +0100, Nicolas Dechesne wrote:
> >>Le 28 nov. 2012 18:28, "Gary Thomas" <gary@mlbassoc.com> a ?crit :
> >>>
> >>>On 2012-11-28 10:19, Denys Dmytriyenko wrote:
> >>>>
> >>>>http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196
> >>>
> >>>
> >>>Bottom line: I should just use the latest Poky/Yocto tree?  I just updated
> >>>the meta-ti(master) and the quoted patches don't seem to have been applied
> >>>(the xf86-video-omap_git.bb is still present)
> >>>
> >>
> >>Indeed you need to apply them for now. Denys should be merging them soon.
> >>But a tested-by won't hurt...
> >
> >They just been merged. Had a slight delay testing the master branch - too much
> >time spent dealing with denzil-based releases here from multiple teams... :(
> 
> Sadly, it's still breaking when I build using the latest:
> 
> checking whether to include DRI support... checking for /usr/include/xorg/dri.h... configure: error: cannot check for file existence when cross compiling
> Configure failed. The contents of all config.log files follows to aid debugging
> /home/local/p82_poky/tmp/work/armv7ahf-vfp-neon-amltd-linux-gnueabi/xf86-video-omap/2_0.4.2+gitr9+653ccadb38c87be565df3fbf2ff24a0cbe5a5e98-r20.1/git/config.log
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.

http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1184

-- 
Denys

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Gary Thomas]

On 2012-11-28 13:17, Denys Dmytriyenko wrote:
> On Wed, Nov 28, 2012 at 12:58:23PM -0700, Gary Thomas wrote:
>> On 2012-11-28 10:34, Denys Dmytriyenko wrote:
>>> On Wed, Nov 28, 2012 at 06:31:17PM +0100, Nicolas Dechesne wrote:
>>>> Le 28 nov. 2012 18:28, "Gary Thomas" <gary@mlbassoc.com> a ?crit :
>>>>>
>>>>> On 2012-11-28 10:19, Denys Dmytriyenko wrote:
>>>>>>
>>>>>> http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1196
>>>>>
>>>>>
>>>>> Bottom line: I should just use the latest Poky/Yocto tree?  I just updated
>>>>> the meta-ti(master) and the quoted patches don't seem to have been applied
>>>>> (the xf86-video-omap_git.bb is still present)
>>>>>
>>>>
>>>> Indeed you need to apply them for now. Denys should be merging them soon.
>>>> But a tested-by won't hurt...
>>>
>>> They just been merged. Had a slight delay testing the master branch - too much
>>> time spent dealing with denzil-based releases here from multiple teams... :(
>>
>> Sadly, it's still breaking when I build using the latest:
>>
>> checking whether to include DRI support... checking for /usr/include/xorg/dri.h... configure: error: cannot check for file existence when cross compiling
>> Configure failed. The contents of all config.log files follows to aid debugging
>> /home/local/p82_poky/tmp/work/armv7ahf-vfp-neon-amltd-linux-gnueabi/xf86-video-omap/2_0.4.2+gitr9+653ccadb38c87be565df3fbf2ff24a0cbe5a5e98-r20.1/git/config.log
>> This file contains any messages produced by compilers while
>> running configure, to aid debugging if configure makes a mistake.
>
> http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/1184
>

My bad :-(  I still had the old meta-ti recipe in my tree which got
in the way...

I've now managed to build this, yet to test it on my OMAP4 board.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Nicolas Dechesne]

On Wed, Nov 28, 2012 at 9:47 PM, Gary Thomas <gary@mlbassoc.com> wrote:
> My bad :-(  I still had the old meta-ti recipe in my tree which got
> in the way...
>
> I've now managed to build this, yet to test it on my OMAP4 board.

nice... with omapdrm+xf86-video-omap, you should be able to play with
xrandr for dynamic display (X11) resize and even rotation..

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Gary Thomas]

On 2012-11-28 13:50, Nicolas Dechesne wrote:
> On Wed, Nov 28, 2012 at 9:47 PM, Gary Thomas <gary@mlbassoc.com> wrote:
>> My bad :-(  I still had the old meta-ti recipe in my tree which got
>> in the way...
>>
>> I've now managed to build this, yet to test it on my OMAP4 board.
>
> nice... with omapdrm+xf86-video-omap, you should be able to play with
> xrandr for dynamic display (X11) resize and even rotation..
>

Any clues on how to test that (I'm not familiar with xrandr)

Also, with this driver when X blanks the screen (idle/timeout), it
just goes white, not actually disabled/black like the 'fbdev' driver.
Is that something I can configure?  This is important because this
is for a battery based device and I need to be careful with every
drop of power use...

Thanks

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: Can't build recipes-graphics/xorg-xserver/xf86-video-omap_git.bb

[Nicolas Dechesne]

On Thu, Nov 29, 2012 at 4:01 PM, Gary Thomas <gary@mlbassoc.com> wrote:
> Any clues on how to test that (I'm not familiar with xrandr)

xrandr should return the list of connected display and the resolution
they support

then to change resolution:
xrandr --output HDMI-1 --mode 800x600  (or any other)

and to rotate:
xrandr --output HDMI-1 --rotate left

you can check man xrandr, e.g.:

 --reflect reflection
Reflection can be one of 'normal' 'x', 'y' or 'xy'. This causes the
output contents to be reflected across the specified axes.
--rotate rotation
Rotation can be one of 'normal', 'left', 'right' or 'inverted'. This
causes the output contents to be rotated in the specified direction.
'right' specifies a clockwise rotation of the picture and 'left'
specifies a counter-clockwise rotation.

there are still some bugs with rotation sometimes... but it should be
mostly working.

>
> Also, with this driver when X blanks the screen (idle/timeout), it
> just goes white, not actually disabled/black like the 'fbdev' driver.
> Is that something I can configure?  This is important because this
> is for a battery based device and I need to be careful with every
> drop of power use...