* [PATCH 0/2] ARM: OMAP2420: Fix ethernet support @ 2012-11-13 22:02 ` Jon Hunter 0 siblings, 0 replies; 8+ messages in thread From: Jon Hunter @ 2012-11-13 22:02 UTC (permalink / raw) To: Tony Lindgren; +Cc: linux-omap, linux-arm, Jon Hunter Fix ethernet support for OMAP2420 and remove legacy code for ethernet configuration. Jon Hunter (2): ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 ARM: OMAP: Remove debug-devices.c arch/arm/mach-omap2/board-h4.c | 80 +++++++----------------------- arch/arm/mach-omap2/debug-devices.h | 9 ---- arch/arm/plat-omap/Makefile | 1 - arch/arm/plat-omap/debug-devices.c | 93 ----------------------------------- 4 files changed, 19 insertions(+), 164 deletions(-) delete mode 100644 arch/arm/mach-omap2/debug-devices.h delete mode 100644 arch/arm/plat-omap/debug-devices.c -- 1.7.9.5 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/2] ARM: OMAP2420: Fix ethernet support @ 2012-11-13 22:02 ` Jon Hunter 0 siblings, 0 replies; 8+ messages in thread From: Jon Hunter @ 2012-11-13 22:02 UTC (permalink / raw) To: linux-arm-kernel Fix ethernet support for OMAP2420 and remove legacy code for ethernet configuration. Jon Hunter (2): ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 ARM: OMAP: Remove debug-devices.c arch/arm/mach-omap2/board-h4.c | 80 +++++++----------------------- arch/arm/mach-omap2/debug-devices.h | 9 ---- arch/arm/plat-omap/Makefile | 1 - arch/arm/plat-omap/debug-devices.c | 93 ----------------------------------- 4 files changed, 19 insertions(+), 164 deletions(-) delete mode 100644 arch/arm/mach-omap2/debug-devices.h delete mode 100644 arch/arm/plat-omap/debug-devices.c -- 1.7.9.5 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 2012-11-13 22:02 ` Jon Hunter @ 2012-11-13 22:02 ` Jon Hunter -1 siblings, 0 replies; 8+ messages in thread From: Jon Hunter @ 2012-11-13 22:02 UTC (permalink / raw) To: Tony Lindgren; +Cc: linux-omap, linux-arm, Jon Hunter Ethernet is not currently working on the OMAP2420 H4 board. In commit f604931 (ARM: OMAP: abstract debug card setup (smc, leds)) the function h4_init_smc91x() that initialised the ethernet controller was renamed to h4_init_debug() but was never called when initialising the board. Adding a call to h4_init_debug() fixes ethernet support, however, instead of using the legacy H4 code migrate the H4 to use the gpmc_smc91x_init() function instead and remove the legacy H4 code. Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- arch/arm/mach-omap2/board-h4.c | 80 ++++++++++------------------------------ 1 file changed, 19 insertions(+), 61 deletions(-) diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 8d04bf8..2adba9d 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -34,19 +34,16 @@ #include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> -#include "debug-devices.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include "common.h" +#include "gpmc-smc91x.h" #include "mux.h" #include "control.h" #define H4_FLASH_CS 0 -#define H4_SMC91X_CS 1 - -#define H4_ETHR_GPIO_IRQ 92 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) static const uint32_t board_matrix_keys[] = { @@ -250,71 +247,31 @@ static u32 is_gpmc_muxed(void) return 0; } -static inline void __init h4_init_debug(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int muxed, rate; - struct clk *gpmc_fck; - - eth_cs = H4_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 92, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, +}; +static void __init board_smc91x_init(void) +{ if (is_gpmc_muxed()) - muxed = 0x200; - else - muxed = 0; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, - 0x00011000 | muxed); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } + board_smc91x_data.flags |= GPMC_MUX_ADD_DATA; - udelay(100); + omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT); + gpmc_smc91x_init(&board_smc91x_data); +} - omap_mux_init_gpio(92, 0); - if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) - gpmc_cs_free(eth_cs); +#else -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init h4_init_flash(void) { unsigned long base; @@ -371,6 +328,7 @@ static void __init omap_h4_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); + board_smc91x_init(); omap_display_init(&h4_dss_data); } -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/2] ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 @ 2012-11-13 22:02 ` Jon Hunter 0 siblings, 0 replies; 8+ messages in thread From: Jon Hunter @ 2012-11-13 22:02 UTC (permalink / raw) To: linux-arm-kernel Ethernet is not currently working on the OMAP2420 H4 board. In commit f604931 (ARM: OMAP: abstract debug card setup (smc, leds)) the function h4_init_smc91x() that initialised the ethernet controller was renamed to h4_init_debug() but was never called when initialising the board. Adding a call to h4_init_debug() fixes ethernet support, however, instead of using the legacy H4 code migrate the H4 to use the gpmc_smc91x_init() function instead and remove the legacy H4 code. Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- arch/arm/mach-omap2/board-h4.c | 80 ++++++++++------------------------------ 1 file changed, 19 insertions(+), 61 deletions(-) diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 8d04bf8..2adba9d 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -34,19 +34,16 @@ #include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> -#include "debug-devices.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include "common.h" +#include "gpmc-smc91x.h" #include "mux.h" #include "control.h" #define H4_FLASH_CS 0 -#define H4_SMC91X_CS 1 - -#define H4_ETHR_GPIO_IRQ 92 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) static const uint32_t board_matrix_keys[] = { @@ -250,71 +247,31 @@ static u32 is_gpmc_muxed(void) return 0; } -static inline void __init h4_init_debug(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int muxed, rate; - struct clk *gpmc_fck; - - eth_cs = H4_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 92, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, +}; +static void __init board_smc91x_init(void) +{ if (is_gpmc_muxed()) - muxed = 0x200; - else - muxed = 0; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, - 0x00011000 | muxed); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } + board_smc91x_data.flags |= GPMC_MUX_ADD_DATA; - udelay(100); + omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT); + gpmc_smc91x_init(&board_smc91x_data); +} - omap_mux_init_gpio(92, 0); - if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) - gpmc_cs_free(eth_cs); +#else -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init h4_init_flash(void) { unsigned long base; @@ -371,6 +328,7 @@ static void __init omap_h4_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); + board_smc91x_init(); omap_display_init(&h4_dss_data); } -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: OMAP: Remove debug-devices.c 2012-11-13 22:02 ` Jon Hunter @ 2012-11-13 22:02 ` Jon Hunter -1 siblings, 0 replies; 8+ messages in thread From: Jon Hunter @ 2012-11-13 22:02 UTC (permalink / raw) To: Tony Lindgren; +Cc: linux-omap, linux-arm, Jon Hunter The OMAP2420 H4 board was the only board using the plat-omap/debug-devices.c code for configuring ethernet support. Now that OMAP2420 H4 has been migrated to use the generic gpmc code for configuring ethernet support, the debug-devices.c file is no longer used and so remove it and its header file. Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- arch/arm/mach-omap2/debug-devices.h | 9 ---- arch/arm/plat-omap/Makefile | 1 - arch/arm/plat-omap/debug-devices.c | 93 ----------------------------------- 3 files changed, 103 deletions(-) delete mode 100644 arch/arm/mach-omap2/debug-devices.h delete mode 100644 arch/arm/plat-omap/debug-devices.c diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h deleted file mode 100644 index a4edbd2..0000000 --- a/arch/arm/mach-omap2/debug-devices.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index dacaee0..1eca088 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o -obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c deleted file mode 100644 index 5a4678e..0000000 --- a/arch/arm/plat-omap/debug-devices.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * linux/arch/arm/plat-omap/debug-devices.c - * - * Copyright (C) 2005 Nokia Corporation - * Modified from mach-omap2/board-h4.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" - -/* Many OMAP development platforms reuse the same "debug board"; these - * platforms include H2, H3, H4, and Perseus2. - */ - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource led_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device led_device = { - .name = "omap_dbg_led", - .id = -1, - .num_resources = ARRAY_SIZE(led_resources), - .resource = led_resources, -}; - -static struct platform_device *debug_devices[] __initdata = { - &smc91x_device, - &led_device, - /* ps2 kbd + mouse ports */ - /* 4 extra uarts */ - /* 6 input dip switches */ - /* 8 output pins */ -}; - -int __init debug_card_init(u32 addr, unsigned gpio) -{ - int status; - - smc91x_resources[0].start = addr + 0x300; - smc91x_resources[0].end = addr + 0x30f; - - smc91x_resources[1].start = gpio_to_irq(gpio); - smc91x_resources[1].end = gpio_to_irq(gpio); - - status = gpio_request(gpio, "SMC91x irq"); - if (status < 0) { - printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio); - return status; - } - gpio_direction_input(gpio); - - led_resources[0].start = addr; - led_resources[0].end = addr + SZ_4K - 1; - - return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices)); -} -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: OMAP: Remove debug-devices.c @ 2012-11-13 22:02 ` Jon Hunter 0 siblings, 0 replies; 8+ messages in thread From: Jon Hunter @ 2012-11-13 22:02 UTC (permalink / raw) To: linux-arm-kernel The OMAP2420 H4 board was the only board using the plat-omap/debug-devices.c code for configuring ethernet support. Now that OMAP2420 H4 has been migrated to use the generic gpmc code for configuring ethernet support, the debug-devices.c file is no longer used and so remove it and its header file. Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- arch/arm/mach-omap2/debug-devices.h | 9 ---- arch/arm/plat-omap/Makefile | 1 - arch/arm/plat-omap/debug-devices.c | 93 ----------------------------------- 3 files changed, 103 deletions(-) delete mode 100644 arch/arm/mach-omap2/debug-devices.h delete mode 100644 arch/arm/plat-omap/debug-devices.c diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h deleted file mode 100644 index a4edbd2..0000000 --- a/arch/arm/mach-omap2/debug-devices.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index dacaee0..1eca088 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o -obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c deleted file mode 100644 index 5a4678e..0000000 --- a/arch/arm/plat-omap/debug-devices.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * linux/arch/arm/plat-omap/debug-devices.c - * - * Copyright (C) 2005 Nokia Corporation - * Modified from mach-omap2/board-h4.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" - -/* Many OMAP development platforms reuse the same "debug board"; these - * platforms include H2, H3, H4, and Perseus2. - */ - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource led_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device led_device = { - .name = "omap_dbg_led", - .id = -1, - .num_resources = ARRAY_SIZE(led_resources), - .resource = led_resources, -}; - -static struct platform_device *debug_devices[] __initdata = { - &smc91x_device, - &led_device, - /* ps2 kbd + mouse ports */ - /* 4 extra uarts */ - /* 6 input dip switches */ - /* 8 output pins */ -}; - -int __init debug_card_init(u32 addr, unsigned gpio) -{ - int status; - - smc91x_resources[0].start = addr + 0x300; - smc91x_resources[0].end = addr + 0x30f; - - smc91x_resources[1].start = gpio_to_irq(gpio); - smc91x_resources[1].end = gpio_to_irq(gpio); - - status = gpio_request(gpio, "SMC91x irq"); - if (status < 0) { - printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio); - return status; - } - gpio_direction_input(gpio); - - led_resources[0].start = addr; - led_resources[0].end = addr + SZ_4K - 1; - - return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices)); -} -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 0/2] ARM: OMAP2420: Fix ethernet support 2012-11-13 22:02 ` Jon Hunter @ 2012-12-14 19:06 ` Tony Lindgren -1 siblings, 0 replies; 8+ messages in thread From: Tony Lindgren @ 2012-12-14 19:06 UTC (permalink / raw) To: Jon Hunter; +Cc: linux-omap, linux-arm * Jon Hunter <jon-hunter@ti.com> [121113 14:04]: > Fix ethernet support for OMAP2420 and remove legacy code for ethernet > configuration. Thanks applying both into omap-for-v3.8/fixes-for-merge-window. Regards, Tony > Jon Hunter (2): > ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 > ARM: OMAP: Remove debug-devices.c > > arch/arm/mach-omap2/board-h4.c | 80 +++++++----------------------- > arch/arm/mach-omap2/debug-devices.h | 9 ---- > arch/arm/plat-omap/Makefile | 1 - > arch/arm/plat-omap/debug-devices.c | 93 ----------------------------------- > 4 files changed, 19 insertions(+), 164 deletions(-) > delete mode 100644 arch/arm/mach-omap2/debug-devices.h > delete mode 100644 arch/arm/plat-omap/debug-devices.c > > -- > 1.7.9.5 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/2] ARM: OMAP2420: Fix ethernet support @ 2012-12-14 19:06 ` Tony Lindgren 0 siblings, 0 replies; 8+ messages in thread From: Tony Lindgren @ 2012-12-14 19:06 UTC (permalink / raw) To: linux-arm-kernel * Jon Hunter <jon-hunter@ti.com> [121113 14:04]: > Fix ethernet support for OMAP2420 and remove legacy code for ethernet > configuration. Thanks applying both into omap-for-v3.8/fixes-for-merge-window. Regards, Tony > Jon Hunter (2): > ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 > ARM: OMAP: Remove debug-devices.c > > arch/arm/mach-omap2/board-h4.c | 80 +++++++----------------------- > arch/arm/mach-omap2/debug-devices.h | 9 ---- > arch/arm/plat-omap/Makefile | 1 - > arch/arm/plat-omap/debug-devices.c | 93 ----------------------------------- > 4 files changed, 19 insertions(+), 164 deletions(-) > delete mode 100644 arch/arm/mach-omap2/debug-devices.h > delete mode 100644 arch/arm/plat-omap/debug-devices.c > > -- > 1.7.9.5 > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-12-14 19:06 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-11-13 22:02 [PATCH 0/2] ARM: OMAP2420: Fix ethernet support Jon Hunter 2012-11-13 22:02 ` Jon Hunter 2012-11-13 22:02 ` [PATCH 1/2] ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 Jon Hunter 2012-11-13 22:02 ` Jon Hunter 2012-11-13 22:02 ` [PATCH 2/2] ARM: OMAP: Remove debug-devices.c Jon Hunter 2012-11-13 22:02 ` Jon Hunter 2012-12-14 19:06 ` [PATCH 0/2] ARM: OMAP2420: Fix ethernet support Tony Lindgren 2012-12-14 19:06 ` Tony Lindgren
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.