* [PATCH 0/3] at91/ssc: fixes on ASoC tree for 3.8 @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre Hi Mark, This series goes on top of current Linus' git tree and fixes an error that we have while compiling DTBs for AT91: ERROR (phandle_references): Reference to non-existent node or label "pinctrl_ssc0_tx" ERROR: Input tree has errors, aborting (use -f to force output) make[3]: *** [arch/arm/boot/dts/at91sam9g20ek.dtb] Error 2 I have included pending material that is dealing with SSC and pinctrl. The pinctrl part can be merged more easily now that the big pinctrl update for AT91 has been merged upstream. I have also included a typo patch that you have already taken as 315656b (ASoC: atmel-ssc: change disable to disable in dts node) in your topic/atmel branch but that was not described properly. If you find it easier, I can provide you a git tree for this material: just tell me... Thanks for your help, best regards, Bo Shen (3): ARM: at91/dts: fix typo in SSC status property ARM: at91/dts: add pinctrl support for SSC peripheral ASoC: atmel-ssc: add pinctrl selection to driver arch/arm/boot/dts/at91sam9260.dtsi | 18 +++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9g45.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9n12.dtsi | 26 +++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++------- drivers/misc/atmel-ssc.c | 8 ++++++++ 6 files changed, 153 insertions(+), 11 deletions(-) -- 1.8.0 ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 0/3] at91/ssc: fixes on ASoC tree for 3.8 @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre Hi Mark, This series goes on top of current Linus' git tree and fixes an error that we have while compiling DTBs for AT91: ERROR (phandle_references): Reference to non-existent node or label "pinctrl_ssc0_tx" ERROR: Input tree has errors, aborting (use -f to force output) make[3]: *** [arch/arm/boot/dts/at91sam9g20ek.dtb] Error 2 I have included pending material that is dealing with SSC and pinctrl. The pinctrl part can be merged more easily now that the big pinctrl update for AT91 has been merged upstream. I have also included a typo patch that you have already taken as 315656b (ASoC: atmel-ssc: change disable to disable in dts node) in your topic/atmel branch but that was not described properly. If you find it easier, I can provide you a git tree for this material: just tell me... Thanks for your help, best regards, Bo Shen (3): ARM: at91/dts: fix typo in SSC status property ARM: at91/dts: add pinctrl support for SSC peripheral ASoC: atmel-ssc: add pinctrl selection to driver arch/arm/boot/dts/at91sam9260.dtsi | 18 +++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9g45.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9n12.dtsi | 26 +++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++------- drivers/misc/atmel-ssc.c | 8 ++++++++ 6 files changed, 153 insertions(+), 11 deletions(-) -- 1.8.0 ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 0/3] at91/ssc: fixes on ASoC tree for 3.8 @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: linux-arm-kernel Hi Mark, This series goes on top of current Linus' git tree and fixes an error that we have while compiling DTBs for AT91: ERROR (phandle_references): Reference to non-existent node or label "pinctrl_ssc0_tx" ERROR: Input tree has errors, aborting (use -f to force output) make[3]: *** [arch/arm/boot/dts/at91sam9g20ek.dtb] Error 2 I have included pending material that is dealing with SSC and pinctrl. The pinctrl part can be merged more easily now that the big pinctrl update for AT91 has been merged upstream. I have also included a typo patch that you have already taken as 315656b (ASoC: atmel-ssc: change disable to disable in dts node) in your topic/atmel branch but that was not described properly. If you find it easier, I can provide you a git tree for this material: just tell me... Thanks for your help, best regards, Bo Shen (3): ARM: at91/dts: fix typo in SSC status property ARM: at91/dts: add pinctrl support for SSC peripheral ASoC: atmel-ssc: add pinctrl selection to driver arch/arm/boot/dts/at91sam9260.dtsi | 18 +++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9g45.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9n12.dtsi | 26 +++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++------- drivers/misc/atmel-ssc.c | 8 ++++++++ 6 files changed, 153 insertions(+), 11 deletions(-) -- 1.8.0 ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 0/3] at91/ssc: fixes on ASoC tree for 3.8 @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre Hi Mark, This series goes on top of current Linus' git tree and fixes an error that we have while compiling DTBs for AT91: ERROR (phandle_references): Reference to non-existent node or label "pinctrl_ssc0_tx" ERROR: Input tree has errors, aborting (use -f to force output) make[3]: *** [arch/arm/boot/dts/at91sam9g20ek.dtb] Error 2 I have included pending material that is dealing with SSC and pinctrl. The pinctrl part can be merged more easily now that the big pinctrl update for AT91 has been merged upstream. I have also included a typo patch that you have already taken as 315656b (ASoC: atmel-ssc: change disable to disable in dts node) in your topic/atmel branch but that was not described properly. If you find it easier, I can provide you a git tree for this material: just tell me... Thanks for your help, best regards, Bo Shen (3): ARM: at91/dts: fix typo in SSC status property ARM: at91/dts: add pinctrl support for SSC peripheral ASoC: atmel-ssc: add pinctrl selection to driver arch/arm/boot/dts/at91sam9260.dtsi | 18 +++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9g45.dtsi | 40 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/at91sam9n12.dtsi | 26 +++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++------- drivers/misc/atmel-ssc.c | 8 ++++++++ 6 files changed, 153 insertions(+), 11 deletions(-) -- 1.8.0 ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/3] ARM: at91/dts: fix typo in SSC status property 2012-12-17 11:23 ` Nicolas Ferre (?) (?) @ 2012-12-17 11:23 ` Nicolas Ferre -1 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Change the value of status to "disabled" to conform with property requirement. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: commit subject line and typos] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9263.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9g45.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 8e6251f..32ec62c 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -368,14 +368,14 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fa1ae0c..231858f 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -425,14 +425,14 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; adc0: adc@fffb0000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 617ede5..40ac3a4 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -92,7 +92,7 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 4 5>; - status = "disable"; + status = "disabled"; }; tcb0: timer@f8008000 { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/3] ARM: at91/dts: fix typo in SSC status property @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Change the value of status to "disabled" to conform with property requirement. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: commit subject line and typos] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9263.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9g45.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 8e6251f..32ec62c 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -368,14 +368,14 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fa1ae0c..231858f 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -425,14 +425,14 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; adc0: adc@fffb0000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 617ede5..40ac3a4 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -92,7 +92,7 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 4 5>; - status = "disable"; + status = "disabled"; }; tcb0: timer@f8008000 { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/3] ARM: at91/dts: fix typo in SSC status property @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: linux-arm-kernel From: Bo Shen <voice.shen@atmel.com> Change the value of status to "disabled" to conform with property requirement. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre at atmel.com: commit subject line and typos] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9263.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9g45.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 8e6251f..32ec62c 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -368,14 +368,14 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc at fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; macb0: ethernet at fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fa1ae0c..231858f 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -425,14 +425,14 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc at fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; adc0: adc at fffb0000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 617ede5..40ac3a4 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -92,7 +92,7 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 4 5>; - status = "disable"; + status = "disabled"; }; tcb0: timer at f8008000 { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/3] ARM: at91/dts: fix typo in SSC status property @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Change the value of status to "disabled" to conform with property requirement. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: commit subject line and typos] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9263.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9g45.dtsi | 4 ++-- arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 8e6251f..32ec62c 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -368,14 +368,14 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fa1ae0c..231858f 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -425,14 +425,14 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; adc0: adc@fffb0000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 617ede5..40ac3a4 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -92,7 +92,7 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 4 5>; - status = "disable"; + status = "disabled"; }; tcb0: timer@f8008000 { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 1/3] ARM: at91/dts: fix typo in SSC status property 2012-12-17 11:23 ` Nicolas Ferre @ 2012-12-17 14:25 ` Mark Brown -1 siblings, 0 replies; 18+ messages in thread From: Mark Brown @ 2012-12-17 14:25 UTC (permalink / raw) To: Nicolas Ferre Cc: voice.shen, Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound [-- Attachment #1: Type: text/plain, Size: 233 bytes --] On Mon, Dec 17, 2012 at 12:23:24PM +0100, Nicolas Ferre wrote: > From: Bo Shen <voice.shen@atmel.com> > > Change the value of status to "disabled" to conform with > property requirement. This has already gone towards Linus. [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/3] ARM: at91/dts: fix typo in SSC status property @ 2012-12-17 14:25 ` Mark Brown 0 siblings, 0 replies; 18+ messages in thread From: Mark Brown @ 2012-12-17 14:25 UTC (permalink / raw) To: linux-arm-kernel On Mon, Dec 17, 2012 at 12:23:24PM +0100, Nicolas Ferre wrote: > From: Bo Shen <voice.shen@atmel.com> > > Change the value of status to "disabled" to conform with > property requirement. This has already gone towards Linus. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121217/ca8a398d/attachment.sig> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/3] ARM: at91/dts: add pinctrl support for SSC peripheral 2012-12-17 11:23 ` Nicolas Ferre (?) (?) @ 2012-12-17 11:23 ` Nicolas Ferre -1 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Add pinctrl support for SSC on AT91 dtsi files. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9n12.dtsi | 26 ++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++++------- 5 files changed, 141 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 68bccf4..cb7bcc5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -306,6 +306,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0 /* PB17 periph A */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 20 0x1 0x0 /* PB20 periph A */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -450,6 +466,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 32ec62c..271d4de 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -271,6 +271,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x2 0x0 /* PB0 periph B */ + 1 1 0x2 0x0 /* PB1 periph B */ + 1 2 0x2 0x0>; /* PB2 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x2 0x0 /* PB3 periph B */ + 1 4 0x2 0x0 /* PB4 periph B */ + 1 5 0x2 0x0>; /* PB5 periph B */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -368,6 +400,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -375,6 +409,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 231858f..6b1d4ca 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -290,6 +290,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <3 0 0x1 0x0 /* PD0 periph A */ + 3 1 0x1 0x0 /* PD1 periph A */ + 3 2 0x1 0x0>; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <3 3 0x1 0x0 /* PD3 periph A */ + 3 4 0x1 0x0 /* PD4 periph A */ + 3 5 0x1 0x0>; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A */ + 3 11 0x1 0x0 /* PD11 periph A */ + 3 12 0x1 0x0>; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <3 13 0x1 0x0 /* PD13 periph A */ + 3 14 0x1 0x0 /* PD14 periph A */ + 3 15 0x1 0x0>; /* PD15 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -425,6 +457,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -432,6 +466,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index e9efb34..80e29c6 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -28,6 +28,7 @@ tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; + ssc0 = &ssc0; }; cpus { cpu@0 { @@ -244,6 +245,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -294,6 +311,15 @@ status = "disabled"; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40ac3a4..3a47cf9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -88,13 +88,6 @@ interrupts = <1 4 7>; }; - ssc0: ssc@f0010000 { - compatible = "atmel,at91sam9g45-ssc"; - reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; - status = "disabled"; - }; - tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -290,6 +283,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -333,6 +342,15 @@ }; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/3] ARM: at91/dts: add pinctrl support for SSC peripheral @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Add pinctrl support for SSC on AT91 dtsi files. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9n12.dtsi | 26 ++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++++------- 5 files changed, 141 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 68bccf4..cb7bcc5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -306,6 +306,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0 /* PB17 periph A */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 20 0x1 0x0 /* PB20 periph A */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -450,6 +466,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 32ec62c..271d4de 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -271,6 +271,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x2 0x0 /* PB0 periph B */ + 1 1 0x2 0x0 /* PB1 periph B */ + 1 2 0x2 0x0>; /* PB2 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x2 0x0 /* PB3 periph B */ + 1 4 0x2 0x0 /* PB4 periph B */ + 1 5 0x2 0x0>; /* PB5 periph B */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -368,6 +400,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -375,6 +409,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 231858f..6b1d4ca 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -290,6 +290,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <3 0 0x1 0x0 /* PD0 periph A */ + 3 1 0x1 0x0 /* PD1 periph A */ + 3 2 0x1 0x0>; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <3 3 0x1 0x0 /* PD3 periph A */ + 3 4 0x1 0x0 /* PD4 periph A */ + 3 5 0x1 0x0>; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A */ + 3 11 0x1 0x0 /* PD11 periph A */ + 3 12 0x1 0x0>; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <3 13 0x1 0x0 /* PD13 periph A */ + 3 14 0x1 0x0 /* PD14 periph A */ + 3 15 0x1 0x0>; /* PD15 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -425,6 +457,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -432,6 +466,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index e9efb34..80e29c6 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -28,6 +28,7 @@ tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; + ssc0 = &ssc0; }; cpus { cpu@0 { @@ -244,6 +245,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -294,6 +311,15 @@ status = "disabled"; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40ac3a4..3a47cf9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -88,13 +88,6 @@ interrupts = <1 4 7>; }; - ssc0: ssc@f0010000 { - compatible = "atmel,at91sam9g45-ssc"; - reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; - status = "disabled"; - }; - tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -290,6 +283,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -333,6 +342,15 @@ }; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/3] ARM: at91/dts: add pinctrl support for SSC peripheral @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: linux-arm-kernel From: Bo Shen <voice.shen@atmel.com> Add pinctrl support for SSC on AT91 dtsi files. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre at atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9n12.dtsi | 26 ++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++++------- 5 files changed, 141 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 68bccf4..cb7bcc5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -306,6 +306,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0 /* PB17 periph A */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 20 0x1 0x0 /* PB20 periph A */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + }; + pioA: gpio at fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -450,6 +466,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 32ec62c..271d4de 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -271,6 +271,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x2 0x0 /* PB0 periph B */ + 1 1 0x2 0x0 /* PB1 periph B */ + 1 2 0x2 0x0>; /* PB2 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x2 0x0 /* PB3 periph B */ + 1 4 0x2 0x0 /* PB4 periph B */ + 1 5 0x2 0x0>; /* PB5 periph B */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + pioA: gpio at fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -368,6 +400,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -375,6 +409,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 231858f..6b1d4ca 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -290,6 +290,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <3 0 0x1 0x0 /* PD0 periph A */ + 3 1 0x1 0x0 /* PD1 periph A */ + 3 2 0x1 0x0>; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <3 3 0x1 0x0 /* PD3 periph A */ + 3 4 0x1 0x0 /* PD4 periph A */ + 3 5 0x1 0x0>; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A */ + 3 11 0x1 0x0 /* PD11 periph A */ + 3 12 0x1 0x0>; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <3 13 0x1 0x0 /* PD13 periph A */ + 3 14 0x1 0x0 /* PD14 periph A */ + 3 15 0x1 0x0>; /* PD15 periph A */ + }; + }; + pioA: gpio at fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -425,6 +457,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -432,6 +466,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index e9efb34..80e29c6 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -28,6 +28,7 @@ tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; + ssc0 = &ssc0; }; cpus { cpu at 0 { @@ -244,6 +245,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio at fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -294,6 +311,15 @@ status = "disabled"; }; + ssc0: ssc at f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + usart0: serial at f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40ac3a4..3a47cf9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -88,13 +88,6 @@ interrupts = <1 4 7>; }; - ssc0: ssc at f0010000 { - compatible = "atmel,at91sam9g45-ssc"; - reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; - status = "disabled"; - }; - tcb0: timer at f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -290,6 +283,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio at fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -333,6 +342,15 @@ }; }; + ssc0: ssc at f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + mmc0: mmc at f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/3] ARM: at91/dts: add pinctrl support for SSC peripheral @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Add pinctrl support for SSC on AT91 dtsi files. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/at91sam9263.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 36 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9n12.dtsi | 26 ++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 32 +++++++++++++++++++++++++------- 5 files changed, 141 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 68bccf4..cb7bcc5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -306,6 +306,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins + <1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0 /* PB17 periph A */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins + <1 19 0x1 0x0 /* PB19 periph A */ + 1 20 0x1 0x0 /* PB20 periph A */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -450,6 +466,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 32ec62c..271d4de 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -271,6 +271,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins + <1 0 0x2 0x0 /* PB0 periph B */ + 1 1 0x2 0x0 /* PB1 periph B */ + 1 2 0x2 0x0>; /* PB2 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins + <1 3 0x2 0x0 /* PB3 periph B */ + 1 4 0x2 0x0 /* PB4 periph B */ + 1 5 0x2 0x0>; /* PB5 periph B */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -368,6 +400,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -375,6 +409,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 231858f..6b1d4ca 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -290,6 +290,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins + <3 0 0x1 0x0 /* PD0 periph A */ + 3 1 0x1 0x0 /* PD1 periph A */ + 3 2 0x1 0x0>; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins + <3 3 0x1 0x0 /* PD3 periph A */ + 3 4 0x1 0x0 /* PD4 periph A */ + 3 5 0x1 0x0>; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins + <3 10 0x1 0x0 /* PD10 periph A */ + 3 11 0x1 0x0 /* PD11 periph A */ + 3 12 0x1 0x0>; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins + <3 13 0x1 0x0 /* PD13 periph A */ + 3 14 0x1 0x0 /* PD14 periph A */ + 3 15 0x1 0x0>; /* PD15 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -425,6 +457,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -432,6 +466,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index e9efb34..80e29c6 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -28,6 +28,7 @@ tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; + ssc0 = &ssc0; }; cpus { cpu@0 { @@ -244,6 +245,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -294,6 +311,15 @@ status = "disabled"; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40ac3a4..3a47cf9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -88,13 +88,6 @@ interrupts = <1 4 7>; }; - ssc0: ssc@f0010000 { - compatible = "atmel,at91sam9g45-ssc"; - reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; - status = "disabled"; - }; - tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -290,6 +283,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -333,6 +342,15 @@ }; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/3] ASoC: atmel-ssc: add pinctrl selection to driver 2012-12-17 11:23 ` Nicolas Ferre (?) (?) @ 2012-12-17 11:23 ` Nicolas Ferre -1 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Add default pinctrl selection to atmel-ssc driver. The pinctrl is mandatory. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- drivers/misc/atmel-ssc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 158da5a..3c09cbb 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/of.h> +#include <linux/pinctrl/consumer.h> /* Serialize access to ssc_list and user count */ static DEFINE_SPINLOCK(user_lock); @@ -131,6 +132,13 @@ static int ssc_probe(struct platform_device *pdev) struct resource *regs; struct ssc_device *ssc; const struct atmel_ssc_platform_data *plat_dat; + struct pinctrl *pinctrl; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_err(&pdev->dev, "Failed to request pinctrl\n"); + return PTR_ERR(pinctrl); + } ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL); if (!ssc) { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/3] ASoC: atmel-ssc: add pinctrl selection to driver @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Add default pinctrl selection to atmel-ssc driver. The pinctrl is mandatory. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- drivers/misc/atmel-ssc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 158da5a..3c09cbb 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/of.h> +#include <linux/pinctrl/consumer.h> /* Serialize access to ssc_list and user count */ static DEFINE_SPINLOCK(user_lock); @@ -131,6 +132,13 @@ static int ssc_probe(struct platform_device *pdev) struct resource *regs; struct ssc_device *ssc; const struct atmel_ssc_platform_data *plat_dat; + struct pinctrl *pinctrl; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_err(&pdev->dev, "Failed to request pinctrl\n"); + return PTR_ERR(pinctrl); + } ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL); if (!ssc) { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/3] ASoC: atmel-ssc: add pinctrl selection to driver @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: linux-arm-kernel From: Bo Shen <voice.shen@atmel.com> Add default pinctrl selection to atmel-ssc driver. The pinctrl is mandatory. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre at atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- drivers/misc/atmel-ssc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 158da5a..3c09cbb 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/of.h> +#include <linux/pinctrl/consumer.h> /* Serialize access to ssc_list and user count */ static DEFINE_SPINLOCK(user_lock); @@ -131,6 +132,13 @@ static int ssc_probe(struct platform_device *pdev) struct resource *regs; struct ssc_device *ssc; const struct atmel_ssc_platform_data *plat_dat; + struct pinctrl *pinctrl; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_err(&pdev->dev, "Failed to request pinctrl\n"); + return PTR_ERR(pinctrl); + } ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL); if (!ssc) { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/3] ASoC: atmel-ssc: add pinctrl selection to driver @ 2012-12-17 11:23 ` Nicolas Ferre 0 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2012-12-17 11:23 UTC (permalink / raw) To: broonie, voice.shen Cc: Jean-Christophe PLAGNIOL-VILLARD, Olof Johansson, linux-arm-kernel, linux-kernel, alsa-devel, linux-sound, Nicolas Ferre From: Bo Shen <voice.shen@atmel.com> Add default pinctrl selection to atmel-ssc driver. The pinctrl is mandatory. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- drivers/misc/atmel-ssc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 158da5a..3c09cbb 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/of.h> +#include <linux/pinctrl/consumer.h> /* Serialize access to ssc_list and user count */ static DEFINE_SPINLOCK(user_lock); @@ -131,6 +132,13 @@ static int ssc_probe(struct platform_device *pdev) struct resource *regs; struct ssc_device *ssc; const struct atmel_ssc_platform_data *plat_dat; + struct pinctrl *pinctrl; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_err(&pdev->dev, "Failed to request pinctrl\n"); + return PTR_ERR(pinctrl); + } ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL); if (!ssc) { -- 1.8.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
end of thread, other threads:[~2012-12-17 14:25 UTC | newest] Thread overview: 18+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-12-17 11:23 [PATCH 0/3] at91/ssc: fixes on ASoC tree for 3.8 Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` [PATCH 1/3] ARM: at91/dts: fix typo in SSC status property Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 14:25 ` Mark Brown 2012-12-17 14:25 ` Mark Brown 2012-12-17 11:23 ` [PATCH 2/3] ARM: at91/dts: add pinctrl support for SSC peripheral Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` [PATCH 3/3] ASoC: atmel-ssc: add pinctrl selection to driver Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre 2012-12-17 11:23 ` Nicolas Ferre
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.