From: Ondrej Zary <linux@rainbow-software.org>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org
Subject: AverMedia Satelllite Hybrid+FM A706
Date: Tue, 18 Dec 2012 22:45:50 +0100 [thread overview]
Message-ID: <201212182245.50722.linux@rainbow-software.org> (raw)
Hello,
I'm trying to add support for AverMedia Satelllite Hybrid+FM A706 card to
saa7134 driver but it does not seem to work :( I did something like this
(also tried .tuner_addr = ADDR_UNSET). It's probably mostly wrong as it's
copied from other cards.
--- a/drivers/media/pci/saa7134/saa7134-cards.c
+++ b/drivers/media/pci/saa7134/saa7134-cards.c
@@ -5773,6 +5773,36 @@ struct saa7134_board saa7134_boards[] = {
.gpio = 0x0000000,
},
},
+ [SAA7134_BOARD_AVERMEDIA_A706] = {
+ .name = "AverMedia AverTV Satellite Hybrid+FM A706",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = 0x63,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 2,
+ .gpiomask = 1 << 21,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp,
+ .vmux = 0,
+ .amux = LINE2,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
};
@@ -7020,6 +7050,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subdevice = 0x0911,
.driver_data = SAA7134_BOARD_SENSORAY811_911,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0x2055, /* AverTV Satellite Hybrid+FM A706 */
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A706,
+ }, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -7266,6 +7302,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
case SAA7134_BOARD_KWORLD_PC150U:
case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
+ case SAA7134_BOARD_AVERMEDIA_A706:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
break;
diff --git a/drivers/media/pci/saa7134/saa7134-dvb.c b/drivers/media/pci/saa7134/saa7134-dvb.c
index b209de4..c6f886d 100644
--- a/drivers/media/pci/saa7134/saa7134-dvb.c
+++ b/drivers/media/pci/saa7134/saa7134-dvb.c
@@ -1070,6 +1070,11 @@ static struct mt312_config zl10313_compro_s350_config = {
.demod_address = 0x0e,
};
+static struct mt312_config zl10313_avermedia_a706_config = {
+ .demod_address = 0x0e,
+};
+
+
static struct lgdt3305_config hcw_lgdt3305_config = {
.i2c_addr = 0x0e,
.mpeg_mode = LGDT3305_MPEG_SERIAL,
@@ -1817,6 +1822,19 @@ static int dvb_init(struct saa7134_dev *dev)
&prohdtv_pro2_tda18271_config);
}
break;
+ case SAA7134_BOARD_AVERMEDIA_A706:
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &zl10313_avermedia_a706_config, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap) == NULL)
+ wprintk("%s: No zl10039 found!\n",
+ __func__);
+ }
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
diff --git a/drivers/media/pci/saa7134/saa7134.h b/drivers/media/pci/saa7134/saa7134.h
index c24b651..6cef84d 100644
--- a/drivers/media/pci/saa7134/saa7134.h
+++ b/drivers/media/pci/saa7134/saa7134.h
@@ -332,6 +332,7 @@ struct saa7134_card_ir {
#define SAA7134_BOARD_SENSORAY811_911 188
#define SAA7134_BOARD_KWORLD_PC150U 189
#define SAA7134_BOARD_ASUSTeK_PS3_100 190
+#define SAA7134_BOARD_AVERMEDIA_A706 191
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
The result is:
[ 3.843111] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 3.843677] saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 9, latency: 32, mmio: 0xf4000000
[ 3.843747] saa7133[0]: subsystem: 1461:2055, board: AverMedia AverTV Satellite Hybrid+FM A706 [card=191,autodetected]
[ 3.843830] saa7133[0]: board init: gpio is 1835ff
[ 4.085202] saa7133[0]: i2c eeprom 00: 61 14 55 20 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.085210] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 4.085217] saa7133[0]: i2c eeprom 20: 02 40 01 02 02 01 01 04 06 ff 00 57 ff ff ff ff
[ 4.085225] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085232] saa7133[0]: i2c eeprom 40: 60 a0 00 c6 96 ff 05 30 8b 05 ff 40 ff ff ff ff
[ 4.085240] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085247] saa7133[0]: i2c eeprom 60: ff 89 00 c0 ff 1c 08 19 97 89 ff ff 80 15 0a ff
[ 4.085255] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085262] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085270] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085277] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085285] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085292] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085300] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.085307] saa7133[0]: i2c eeprom e0: 00 01 81 b0 65 07 ff ff ff ff ff ff ff ff ff ff
[ 4.085315] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.108510] tuner 2-0063: Tuner -1 found with type(s) Radio TV.
[ 4.247906] tda8290: no gate control were provided!
[ 4.247995] tuner 2-0063: Tuner has no way to set tv freq
[ 4.248057] tuner 2-0063: Tuner has no way to set tv freq
[ 4.248454] saa7133[0]: registered device video0 [v4l2]
[ 4.248547] saa7133[0]: registered device vbi0
[ 4.248626] saa7133[0]: registered device radio0
[ 4.305662] tuner 2-0063: Tuner has no way to set tv freq
[ 4.306555] tuner 2-0063: tuner has no way to set radio frequency
[ 4.307711] tuner 2-0063: Tuner has no way to set tv freq
[ 4.443378] dvb_init() allocating 1 frontend
[ 4.462345] mt312_read: ret == -5
[ 4.462352] saa7133[0]/dvb: frontend initialization failed
[ 4.638148] saa7134 ALSA driver for DMA sound loaded
[ 4.638658] saa7133[0]/alsa: saa7133[0] at 0xf4000000 irq 9 registered as card -1
[ 12.585084] tuner 2-0063: tuner has no way to set radio frequency
[ 12.593909] tuner 2-0063: Tuner has no way to set tv freq
[ 12.599760] tuner 2-0063: Tuner has no way to set tv freq
The card should be capable of DVB-S, analog TV and FM radio. No DVB-T.
Main chip: SAA7131E
EEPROM: S24CS02A
DVB-S demod: CE6313 (=ZL10303 = MT312)
DVB-S tuner: CE5039 (=ZL10039)
TV/FM tuner: TDA18271HD
I physically verified that all these chips are connected to a single I2C bus
(CE5039 and TDA18271HD through 100-ohm resistors).
There is also some MCU present (EM78P153) but it's not connected to I2C so it
probably does not matter.
i2cdetect output:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- 41 -- -- -- -- -- -- -- -- -- 4b -- -- -- --
50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- -- UU -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
0x41: wtf is this?
0x4b: TDA8295 (integrated in SAA7131E)
0x50: S24CS02A
0x60: CE5039
0x63: TDA18271HD
But where is CE6313? It should be at 0x0e according to datasheet and pins
35..38 (35 = GND, 36, 37, 38 = VCC).
The tda8290 driver seems to require some i2c gate control but I thinka that
this card has none as all devices are directly on the I2C bus.
Any ideas?
--
Ondrej Zary
next reply other threads:[~2012-12-18 21:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-18 21:45 Ondrej Zary [this message]
2012-12-20 21:37 ` AverMedia Satelllite Hybrid+FM A706 Ondrej Zary
2012-12-21 22:00 ` Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201212182245.50722.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.