From: Ondrej Zary <linux@rainbow-software.org>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org
Subject: Re: AverMedia Satelllite Hybrid+FM A706
Date: Thu, 20 Dec 2012 22:37:11 +0100 [thread overview]
Message-ID: <201212202237.12376.linux@rainbow-software.org> (raw)
In-Reply-To: <201212182245.50722.linux@rainbow-software.org>
Update:
GPIO 9 is CE6313 SLEEP signal
GPIO 23 is CE5039 SLEEP signal
GPIO 25 is CE6313 RESET# signal - this one needs to be set high for CE6313 to
appear on I2C bus
But there is a problem with CE5039 (zl10039) - the I2C bus breaks during its
initialization (SDA stuck low):
Here it works (communication with CE6313):
[ 921.556682] start xfer
[ 921.556684] send address
[ 921.556687] saa7133[0]: i2c data => 0x1c
[ 921.556690] saa7133[0]: i2c stat <= BUSY
[ 921.556725] saa7133[0]: i2c stat <= BUSY
[ 921.556759] saa7133[0]: i2c stat <= BUSY
[ 921.556794] saa7133[0]: i2c stat <= BUSY
[ 921.556828] saa7133[0]: i2c stat <= DONE_WRITE
[ 921.556831] saa7133[0]: i2c stat <= DONE_WRITE
[ 921.556833] write bytes
[ 921.556836] saa7133[0]: i2c data => 0x14
[ 921.556838] saa7133[0]: i2c stat <= BUSY
[ 921.556873] saa7133[0]: i2c stat <= BUSY
[ 921.556907] saa7133[0]: i2c stat <= BUSY
[ 921.556942] saa7133[0]: i2c stat <= DONE_WRITE
[ 921.556945] saa7133[0]: i2c stat <= DONE_WRITE
[ 921.556948] saa7133[0]: i2c data => 0x40
[ 921.556950] saa7133[0]: i2c stat <= BUSY
[ 921.556985] saa7133[0]: i2c stat <= BUSY
[ 921.557019] saa7133[0]: i2c stat <= BUSY
[ 921.557054] saa7133[0]: i2c stat <= DONE_WRITE
[ 921.557057] saa7133[0]: i2c stat <= DONE_WRITE
[ 921.557058] xfer done
[ 921.557060] saa7133[0]: i2c attr => STOP
[ 921.557064] saa7133[0]: i2c stat <= BUSY
[ 921.557098] saa7133[0]: i2c stat <= DONE_STOP
[ 921.557101] saa7133[0]: i2c stat <= DONE_STOP
Here starts CE5039 communication:
[ 921.564672] zl10039_read
[ 921.564677] saa7133[0]: i2c stat <= DONE_STOP
[ 921.564679] start xfer
[ 921.564681] send address
[ 921.564684] saa7133[0]: i2c data => 0xc0
[ 921.564686] saa7133[0]: i2c stat <= BUSY
[ 921.564721] saa7133[0]: i2c stat <= BUSY
[ 921.564755] saa7133[0]: i2c stat <= BUSY
[ 921.564790] saa7133[0]: i2c stat <= BUSY
And here it breaks:
[ 921.564824] saa7133[0]: i2c stat <= ARB_LOST
[ 921.564827] saa7133[0]: i2c stat <= ARB_LOST
[ 921.564829] zl10039_read: i2c read error
[ 921.564833] saa7133[0]: i2c stat <= ARB_LOST
[ 921.564834] saa7133[0]: i2c reset
[ 921.564837] saa7133[0]: i2c stat <= ARB_LOST
[ 921.564839] saa7133[0]: i2c stat => ARB_LOST
[ 921.564843] saa7133[0]: i2c stat <= ARB_LOST
[ 921.564877] saa7133[0]: i2c stat <= IDLE
[ 921.564879] saa7133[0]: i2c attr => NOP
And everything is broken now (until reloading saa7134 module):
[ 921.564882] start xfer
[ 921.564883] send address
[ 921.564886] saa7133[0]: i2c data => 0x1c
[ 921.564889] saa7133[0]: i2c stat <= BUSY
[ 921.564923] saa7133[0]: i2c stat <= BUSY
[ 921.564958] saa7133[0]: i2c stat <= BUSY
[ 921.564992] saa7133[0]: i2c stat <= BUSY
[ 921.565026] saa7133[0]: i2c stat <= BUSY
[ 921.565061] saa7133[0]: i2c stat <= BUSY
[ 921.565095] saa7133[0]: i2c stat <= BUSY
[ 921.565130] saa7133[0]: i2c stat <= BUSY
[ 921.565164] saa7133[0]: i2c stat <= BUSY
[ 921.565199] saa7133[0]: i2c stat <= BUSY
[ 921.565233] saa7133[0]: i2c stat <= BUSY
[ 921.565268] saa7133[0]: i2c stat <= BUSY
[ 921.565302] saa7133[0]: i2c stat <= BUSY
[ 921.565336] saa7133[0]: i2c stat <= BUSY
[ 921.565371] saa7133[0]: i2c stat <= BUSY
[ 921.565405] saa7133[0]: i2c stat <= BUSY
[ 921.565440] mt312_read: ret == -5
[ 921.565450] saa7133[0]/dvb: dvb_init: No zl10039 found!
--
Ondrej Zary
next prev parent reply other threads:[~2012-12-20 21:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-18 21:45 AverMedia Satelllite Hybrid+FM A706 Ondrej Zary
2012-12-20 21:37 ` Ondrej Zary [this message]
2012-12-21 22:00 ` Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201212202237.12376.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.