[PATCH v3 0/8] rtsx patchset for MFD and MMC tree

[PATCH v3 0/8] rtsx patchset for MFD and MMC tree

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Wei WANG (8):
  MFD:rtsx: Fix typo in comment
  MFD:rtsx: Remove redundant code
  MFD:rtsx: Declare that the DMA address limitation is 32bit explicitly
  MFD:rtsx: Add callback function switch_output_voltage
  MMC:rtsx: Using callback function to switch output voltage
  MFD:rtsx: Add callback function conv_clk_and_div_n
  MFD:rtsx: Fix checkpatch warning
  MFD:rtsx: Use macro defines to replace some variables

 drivers/mfd/rtl8411.c             |   29 ++++++++++++++++++++++++
 drivers/mfd/rts5209.c             |   21 +++++++++++++++++
 drivers/mfd/rts5229.c             |   21 +++++++++++++++++
 drivers/mfd/rtsx_pcr.c            |   45 +++++++++++++++++++++++++------------
 drivers/mfd/rtsx_pcr.h            |    3 +++
 drivers/mmc/host/rtsx_pci_sdmmc.c |   30 +++++--------------------
 include/linux/mfd/rtsx_common.h   |    3 +++
 include/linux/mfd/rtsx_pci.h      |   27 +++++++++++++++++-----
 8 files changed, 135 insertions(+), 44 deletions(-)

-- 
1.7.9.5

[PATCH v3 0/8] rtsx patchset for MFD and MMC tree

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Wei WANG (8):
  MFD:rtsx: Fix typo in comment
  MFD:rtsx: Remove redundant code
  MFD:rtsx: Declare that the DMA address limitation is 32bit explicitly
  MFD:rtsx: Add callback function switch_output_voltage
  MMC:rtsx: Using callback function to switch output voltage
  MFD:rtsx: Add callback function conv_clk_and_div_n
  MFD:rtsx: Fix checkpatch warning
  MFD:rtsx: Use macro defines to replace some variables

 drivers/mfd/rtl8411.c             |   29 ++++++++++++++++++++++++
 drivers/mfd/rts5209.c             |   21 +++++++++++++++++
 drivers/mfd/rts5229.c             |   21 +++++++++++++++++
 drivers/mfd/rtsx_pcr.c            |   45 +++++++++++++++++++++++++------------
 drivers/mfd/rtsx_pcr.h            |    3 +++
 drivers/mmc/host/rtsx_pci_sdmmc.c |   30 +++++--------------------
 include/linux/mfd/rtsx_common.h   |    3 +++
 include/linux/mfd/rtsx_pci.h      |   27 +++++++++++++++++-----
 8 files changed, 135 insertions(+), 44 deletions(-)

-- 
1.7.9.5

[PATCH v3 1/8] MFD:rtsx: Fix typo in comment

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Fix a misspelling word in comment

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 include/linux/mfd/rtsx_pci.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 060b721..bebe9f9 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -452,7 +452,7 @@
 #define	SD_RSP_TYPE_R6			0x01
 #define	SD_RSP_TYPE_R7			0x01
 
-/* SD_CONFIURE3 */
+/* SD_CONFIGURE3 */
 #define	SD_RSP_80CLK_TIMEOUT_EN		0x01
 
 /* Card Transfer Reset Register */
-- 
1.7.9.5

[PATCH v3 1/8] MFD:rtsx: Fix typo in comment

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Fix a misspelling word in comment

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 include/linux/mfd/rtsx_pci.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 060b721..bebe9f9 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -452,7 +452,7 @@
 #define	SD_RSP_TYPE_R6			0x01
 #define	SD_RSP_TYPE_R7			0x01
 
-/* SD_CONFIURE3 */
+/* SD_CONFIGURE3 */
 #define	SD_RSP_80CLK_TIMEOUT_EN		0x01
 
 /* Card Transfer Reset Register */
-- 
1.7.9.5

[PATCH v3 2/8] MFD:rtsx: Remove redundant code

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

In function rtsx_pci_add_sg_tbl, the statement "ptr++" is useless.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Borislav Petkov <bp@alien8.de>
---
 drivers/mfd/rtsx_pcr.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 3a44efa..fa2c2bc 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -325,7 +325,6 @@ static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr,
 	val = ((u64)addr << 32) | ((u64)len << 12) | option;
 
 	put_unaligned_le64(val, ptr);
-	ptr++;
 	pcr->sgi++;
 }
 
-- 
1.7.9.5

[PATCH v3 2/8] MFD:rtsx: Remove redundant code

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

In function rtsx_pci_add_sg_tbl, the statement "ptr++" is useless.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Borislav Petkov <bp@alien8.de>
---
 drivers/mfd/rtsx_pcr.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 3a44efa..fa2c2bc 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -325,7 +325,6 @@ static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr,
 	val = ((u64)addr << 32) | ((u64)len << 12) | option;
 
 	put_unaligned_le64(val, ptr);
-	ptr++;
 	pcr->sgi++;
 }
 
-- 
1.7.9.5

[PATCH v3 3/8] MFD:rtsx: Declare that the DMA address limitation is 32bit explicitly

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Realtek PCIe card reader only supports 32bit DMA

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtsx_pcr.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index fa2c2bc..1dc64bb 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -1010,6 +1010,10 @@ static int __devinit rtsx_pci_probe(struct pci_dev *pcidev,
 		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
 		(int)pcidev->revision);
 
+	ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32));
+	if (ret < 0)
+		return ret;
+
 	ret = pci_enable_device(pcidev);
 	if (ret)
 		return ret;
-- 
1.7.9.5

[PATCH v3 3/8] MFD:rtsx: Declare that the DMA address limitation is 32bit explicitly

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Realtek PCIe card reader only supports 32bit DMA

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtsx_pcr.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index fa2c2bc..1dc64bb 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -1010,6 +1010,10 @@ static int __devinit rtsx_pci_probe(struct pci_dev *pcidev,
 		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
 		(int)pcidev->revision);
 
+	ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32));
+	if (ret < 0)
+		return ret;
+
 	ret = pci_enable_device(pcidev);
 	if (ret)
 		return ret;
-- 
1.7.9.5

[PATCH v3 4/8] MFD:rtsx: Add callback function switch_output_voltage

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Different card reader has different method to switch output voltage,
add this callback to let the card reader implement its individual switch
function.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtl8411.c        |   16 ++++++++++++++++
 drivers/mfd/rts5209.c        |   20 ++++++++++++++++++++
 drivers/mfd/rts5229.c        |   20 ++++++++++++++++++++
 drivers/mfd/rtsx_pcr.c       |    9 +++++++++
 include/linux/mfd/rtsx_pci.h |   24 ++++++++++++++++++++----
 5 files changed, 85 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 89f046c..5058ba8 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -112,6 +112,21 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
 			BPP_LDO_POWB, BPP_LDO_SUSPEND);
 }
 
+static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	u8 mask, val;
+
+	mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
+	if (voltage == OUTPUT_3V3)
+		val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
+	else if (voltage == OUTPUT_1V8)
+		val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
+	else
+		return -EINVAL;
+
+	return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
+}
+
 static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
 {
 	unsigned int card_exist;
@@ -172,6 +187,7 @@ static const struct pcr_ops rtl8411_pcr_ops = {
 	.disable_auto_blink = rtl8411_disable_auto_blink,
 	.card_power_on = rtl8411_card_power_on,
 	.card_power_off = rtl8411_card_power_off,
+	.switch_output_voltage = rtl8411_switch_output_voltage,
 	.cd_deglitch = rtl8411_cd_deglitch,
 };
 
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index 283a4f1..ba74de8 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -144,6 +144,25 @@ static int rts5209_card_power_off(struct rtsx_pcr *pcr, int card)
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
+static int rts5209_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	int err;
+
+	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+		if (err < 0)
+			return err;
+	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+		if (err < 0)
+			return err;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct pcr_ops rts5209_pcr_ops = {
 	.extra_init_hw = rts5209_extra_init_hw,
 	.optimize_phy = rts5209_optimize_phy,
@@ -153,6 +172,7 @@ static const struct pcr_ops rts5209_pcr_ops = {
 	.disable_auto_blink = rts5209_disable_auto_blink,
 	.card_power_on = rts5209_card_power_on,
 	.card_power_off = rts5209_card_power_off,
+	.switch_output_voltage = rts5209_switch_output_voltage,
 	.cd_deglitch = NULL,
 };
 
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index b9dbab2..ec1747a 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -114,6 +114,25 @@ static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card)
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
+static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	int err;
+
+	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+		if (err < 0)
+			return err;
+	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+		if (err < 0)
+			return err;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct pcr_ops rts5229_pcr_ops = {
 	.extra_init_hw = rts5229_extra_init_hw,
 	.optimize_phy = rts5229_optimize_phy,
@@ -123,6 +142,7 @@ static const struct pcr_ops rts5229_pcr_ops = {
 	.disable_auto_blink = rts5229_disable_auto_blink,
 	.card_power_on = rts5229_card_power_on,
 	.card_power_off = rts5229_card_power_off,
+	.switch_output_voltage = rts5229_switch_output_voltage,
 	.cd_deglitch = NULL,
 };
 
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 1dc64bb..99e12b8 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -702,6 +702,15 @@ int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card)
 }
 EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off);
 
+int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	if (pcr->ops->switch_output_voltage)
+		return pcr->ops->switch_output_voltage(pcr, voltage);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_switch_output_voltage);
+
 unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr)
 {
 	unsigned int val;
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index bebe9f9..2e3e2e0 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -158,10 +158,9 @@
 #define SG_TRANS_DATA		(0x02 << 4)
 #define SG_LINK_DESC		(0x03 << 4)
 
-/* SD bank voltage */
-#define SD_IO_3V3		0
-#define SD_IO_1V8		1
-
+/* Output voltage */
+#define OUTPUT_3V3		0
+#define OUTPUT_1V8		1
 
 /* Card Clock Enable Register */
 #define SD_CLK_EN			0x04
@@ -201,6 +200,20 @@
 #define CHANGE_CLK			0x01
 
 /* LDO_CTL */
+#define BPP_ASIC_1V7			0x00
+#define BPP_ASIC_1V8			0x01
+#define BPP_ASIC_1V9			0x02
+#define BPP_ASIC_2V0			0x03
+#define BPP_ASIC_2V7			0x04
+#define BPP_ASIC_2V8			0x05
+#define BPP_ASIC_3V2			0x06
+#define BPP_ASIC_3V3			0x07
+#define BPP_REG_TUNED18			0x07
+#define BPP_TUNED18_SHIFT_8402		5
+#define BPP_TUNED18_SHIFT_8411		4
+#define BPP_PAD_MASK			0x04
+#define BPP_PAD_3V3			0x04
+#define BPP_PAD_1V8			0x00
 #define BPP_LDO_POWB			0x03
 #define BPP_LDO_ON			0x00
 #define BPP_LDO_SUSPEND			0x02
@@ -688,6 +701,8 @@ struct pcr_ops {
 	int		(*disable_auto_blink)(struct rtsx_pcr *pcr);
 	int		(*card_power_on)(struct rtsx_pcr *pcr, int card);
 	int		(*card_power_off)(struct rtsx_pcr *pcr, int card);
+	int		(*switch_output_voltage)(struct rtsx_pcr *pcr,
+						u8 voltage);
 	unsigned int	(*cd_deglitch)(struct rtsx_pcr *pcr);
 };
 
@@ -783,6 +798,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
 int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card);
 int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage);
 unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr);
 void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr);
 
-- 
1.7.9.5

[PATCH v3 4/8] MFD:rtsx: Add callback function switch_output_voltage

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Different card reader has different method to switch output voltage,
add this callback to let the card reader implement its individual switch
function.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtl8411.c        |   16 ++++++++++++++++
 drivers/mfd/rts5209.c        |   20 ++++++++++++++++++++
 drivers/mfd/rts5229.c        |   20 ++++++++++++++++++++
 drivers/mfd/rtsx_pcr.c       |    9 +++++++++
 include/linux/mfd/rtsx_pci.h |   24 ++++++++++++++++++++----
 5 files changed, 85 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 89f046c..5058ba8 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -112,6 +112,21 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
 			BPP_LDO_POWB, BPP_LDO_SUSPEND);
 }
 
+static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	u8 mask, val;
+
+	mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
+	if (voltage == OUTPUT_3V3)
+		val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
+	else if (voltage == OUTPUT_1V8)
+		val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
+	else
+		return -EINVAL;
+
+	return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
+}
+
 static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
 {
 	unsigned int card_exist;
@@ -172,6 +187,7 @@ static const struct pcr_ops rtl8411_pcr_ops = {
 	.disable_auto_blink = rtl8411_disable_auto_blink,
 	.card_power_on = rtl8411_card_power_on,
 	.card_power_off = rtl8411_card_power_off,
+	.switch_output_voltage = rtl8411_switch_output_voltage,
 	.cd_deglitch = rtl8411_cd_deglitch,
 };
 
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index 283a4f1..ba74de8 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -144,6 +144,25 @@ static int rts5209_card_power_off(struct rtsx_pcr *pcr, int card)
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
+static int rts5209_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	int err;
+
+	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+		if (err < 0)
+			return err;
+	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+		if (err < 0)
+			return err;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct pcr_ops rts5209_pcr_ops = {
 	.extra_init_hw = rts5209_extra_init_hw,
 	.optimize_phy = rts5209_optimize_phy,
@@ -153,6 +172,7 @@ static const struct pcr_ops rts5209_pcr_ops = {
 	.disable_auto_blink = rts5209_disable_auto_blink,
 	.card_power_on = rts5209_card_power_on,
 	.card_power_off = rts5209_card_power_off,
+	.switch_output_voltage = rts5209_switch_output_voltage,
 	.cd_deglitch = NULL,
 };
 
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index b9dbab2..ec1747a 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -114,6 +114,25 @@ static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card)
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
+static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	int err;
+
+	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+		if (err < 0)
+			return err;
+	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+		if (err < 0)
+			return err;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct pcr_ops rts5229_pcr_ops = {
 	.extra_init_hw = rts5229_extra_init_hw,
 	.optimize_phy = rts5229_optimize_phy,
@@ -123,6 +142,7 @@ static const struct pcr_ops rts5229_pcr_ops = {
 	.disable_auto_blink = rts5229_disable_auto_blink,
 	.card_power_on = rts5229_card_power_on,
 	.card_power_off = rts5229_card_power_off,
+	.switch_output_voltage = rts5229_switch_output_voltage,
 	.cd_deglitch = NULL,
 };
 
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 1dc64bb..99e12b8 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -702,6 +702,15 @@ int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card)
 }
 EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off);
 
+int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	if (pcr->ops->switch_output_voltage)
+		return pcr->ops->switch_output_voltage(pcr, voltage);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_switch_output_voltage);
+
 unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr)
 {
 	unsigned int val;
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index bebe9f9..2e3e2e0 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -158,10 +158,9 @@
 #define SG_TRANS_DATA		(0x02 << 4)
 #define SG_LINK_DESC		(0x03 << 4)
 
-/* SD bank voltage */
-#define SD_IO_3V3		0
-#define SD_IO_1V8		1
-
+/* Output voltage */
+#define OUTPUT_3V3		0
+#define OUTPUT_1V8		1
 
 /* Card Clock Enable Register */
 #define SD_CLK_EN			0x04
@@ -201,6 +200,20 @@
 #define CHANGE_CLK			0x01
 
 /* LDO_CTL */
+#define BPP_ASIC_1V7			0x00
+#define BPP_ASIC_1V8			0x01
+#define BPP_ASIC_1V9			0x02
+#define BPP_ASIC_2V0			0x03
+#define BPP_ASIC_2V7			0x04
+#define BPP_ASIC_2V8			0x05
+#define BPP_ASIC_3V2			0x06
+#define BPP_ASIC_3V3			0x07
+#define BPP_REG_TUNED18			0x07
+#define BPP_TUNED18_SHIFT_8402		5
+#define BPP_TUNED18_SHIFT_8411		4
+#define BPP_PAD_MASK			0x04
+#define BPP_PAD_3V3			0x04
+#define BPP_PAD_1V8			0x00
 #define BPP_LDO_POWB			0x03
 #define BPP_LDO_ON			0x00
 #define BPP_LDO_SUSPEND			0x02
@@ -688,6 +701,8 @@ struct pcr_ops {
 	int		(*disable_auto_blink)(struct rtsx_pcr *pcr);
 	int		(*card_power_on)(struct rtsx_pcr *pcr, int card);
 	int		(*card_power_off)(struct rtsx_pcr *pcr, int card);
+	int		(*switch_output_voltage)(struct rtsx_pcr *pcr,
+						u8 voltage);
 	unsigned int	(*cd_deglitch)(struct rtsx_pcr *pcr);
 };
 
@@ -783,6 +798,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
 int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card);
 int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage);
 unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr);
 void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr);
 
-- 
1.7.9.5

[PATCH v3 5/8] MMC:rtsx: Using callback function to switch output voltage

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Different card reader has different method to switch output voltage, so
we have to use the callback function provided by MFD driver to switch
output pad voltage.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mmc/host/rtsx_pci_sdmmc.c |   30 +++++-------------------------
 1 file changed, 5 insertions(+), 25 deletions(-)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 571915d..f74b5ad 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -1060,26 +1060,6 @@ static int sd_wait_voltage_stable_2(struct realtek_pci_sdmmc *host)
 	return 0;
 }
 
-static int sd_change_bank_voltage(struct realtek_pci_sdmmc *host, u8 voltage)
-{
-	struct rtsx_pcr *pcr = host->pcr;
-	int err;
-
-	if (voltage == SD_IO_3V3) {
-		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
-		if (err < 0)
-			return err;
-	} else if (voltage == SD_IO_1V8) {
-		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
-		if (err < 0)
-			return err;
-	} else {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
@@ -1098,11 +1078,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 	rtsx_pci_start_run(pcr);
 
 	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
-		voltage = SD_IO_3V3;
+		voltage = OUTPUT_3V3;
 	else
-		voltage = SD_IO_1V8;
+		voltage = OUTPUT_1V8;
 
-	if (voltage == SD_IO_1V8) {
+	if (voltage == OUTPUT_1V8) {
 		err = rtsx_pci_write_register(pcr,
 				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
 		if (err < 0)
@@ -1113,11 +1093,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 			goto out;
 	}
 
-	err = sd_change_bank_voltage(host, voltage);
+	err = rtsx_pci_switch_output_voltage(pcr, voltage);
 	if (err < 0)
 		goto out;
 
-	if (voltage == SD_IO_1V8) {
+	if (voltage == OUTPUT_1V8) {
 		err = sd_wait_voltage_stable_2(host);
 		if (err < 0)
 			goto out;
-- 
1.7.9.5

[PATCH v3 5/8] MMC:rtsx: Using callback function to switch output voltage

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Different card reader has different method to switch output voltage, so
we have to use the callback function provided by MFD driver to switch
output pad voltage.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mmc/host/rtsx_pci_sdmmc.c |   30 +++++-------------------------
 1 file changed, 5 insertions(+), 25 deletions(-)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 571915d..f74b5ad 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -1060,26 +1060,6 @@ static int sd_wait_voltage_stable_2(struct realtek_pci_sdmmc *host)
 	return 0;
 }
 
-static int sd_change_bank_voltage(struct realtek_pci_sdmmc *host, u8 voltage)
-{
-	struct rtsx_pcr *pcr = host->pcr;
-	int err;
-
-	if (voltage == SD_IO_3V3) {
-		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
-		if (err < 0)
-			return err;
-	} else if (voltage == SD_IO_1V8) {
-		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
-		if (err < 0)
-			return err;
-	} else {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
@@ -1098,11 +1078,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 	rtsx_pci_start_run(pcr);
 
 	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
-		voltage = SD_IO_3V3;
+		voltage = OUTPUT_3V3;
 	else
-		voltage = SD_IO_1V8;
+		voltage = OUTPUT_1V8;
 
-	if (voltage == SD_IO_1V8) {
+	if (voltage == OUTPUT_1V8) {
 		err = rtsx_pci_write_register(pcr,
 				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
 		if (err < 0)
@@ -1113,11 +1093,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 			goto out;
 	}
 
-	err = sd_change_bank_voltage(host, voltage);
+	err = rtsx_pci_switch_output_voltage(pcr, voltage);
 	if (err < 0)
 		goto out;
 
-	if (voltage == SD_IO_1V8) {
+	if (voltage == OUTPUT_1V8) {
 		err = sd_wait_voltage_stable_2(host);
 		if (err < 0)
 			goto out;
-- 
1.7.9.5

[PATCH v3 6/8] MFD:rtsx: Add callback function conv_clk_and_div_n

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Add callback function conv_clk_and_div_n to convert between SSC clock
and its divider N.
For rtl8411, the formula to calculate SSC clock divider N is different
with the other card reader models.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtl8411.c           |   13 +++++++++++++
 drivers/mfd/rts5209.c           |    1 +
 drivers/mfd/rts5229.c           |    1 +
 drivers/mfd/rtsx_pcr.c          |   14 ++++++++++++--
 include/linux/mfd/rtsx_common.h |    3 +++
 include/linux/mfd/rtsx_pci.h    |    1 +
 6 files changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 5058ba8..3d3b4ad 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -178,6 +178,18 @@ static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
 	return card_exist;
 }
 
+static int rtl8411_conv_clk_and_div_n(int input, int dir)
+{
+	int output;
+
+	if (dir == CLK_TO_DIV_N)
+		output = input * 4 / 5 - 2;
+	else
+		output = (input + 2) * 5 / 4;
+
+	return output;
+}
+
 static const struct pcr_ops rtl8411_pcr_ops = {
 	.extra_init_hw = rtl8411_extra_init_hw,
 	.optimize_phy = NULL,
@@ -189,6 +201,7 @@ static const struct pcr_ops rtl8411_pcr_ops = {
 	.card_power_off = rtl8411_card_power_off,
 	.switch_output_voltage = rtl8411_switch_output_voltage,
 	.cd_deglitch = rtl8411_cd_deglitch,
+	.conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
 };
 
 /* SD Pull Control Enable:
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index ba74de8..98fe0f3 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -174,6 +174,7 @@ static const struct pcr_ops rts5209_pcr_ops = {
 	.card_power_off = rts5209_card_power_off,
 	.switch_output_voltage = rts5209_switch_output_voltage,
 	.cd_deglitch = NULL,
+	.conv_clk_and_div_n = NULL,
 };
 
 /* SD Pull Control Enable:
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index ec1747a..29d889c 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -144,6 +144,7 @@ static const struct pcr_ops rts5229_pcr_ops = {
 	.card_power_off = rts5229_card_power_off,
 	.switch_output_voltage = rts5229_switch_output_voltage,
 	.cd_deglitch = NULL,
+	.conv_clk_and_div_n = NULL,
 };
 
 /* SD Pull Control Enable:
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 99e12b8..958b738 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -629,7 +629,10 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	if (clk == pcr->cur_clock)
 		return 0;
 
-	N = (u8)(clk - 2);
+	if (pcr->ops->conv_clk_and_div_n)
+		N = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
+	else
+		N = (u8)(clk - 2);
 	if ((clk <= 2) || (N > max_N))
 		return -EINVAL;
 
@@ -640,7 +643,14 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	/* Make sure that the SSC clock div_n is equal or greater than min_N */
 	div = CLK_DIV_1;
 	while ((N < min_N) && (div < max_div)) {
-		N = (N + 2) * 2 - 2;
+		if (pcr->ops->conv_clk_and_div_n) {
+			int dbl_clk = pcr->ops->conv_clk_and_div_n(N,
+					DIV_N_TO_CLK) * 2;
+			N = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk,
+					CLK_TO_DIV_N);
+		} else {
+			N = (N + 2) * 2 - 2;
+		}
 		div++;
 	}
 	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h
index a8d393e..2b13970 100644
--- a/include/linux/mfd/rtsx_common.h
+++ b/include/linux/mfd/rtsx_common.h
@@ -38,6 +38,9 @@
 #define RTSX_SD_CARD			0
 #define RTSX_MS_CARD			1
 
+#define CLK_TO_DIV_N			0
+#define DIV_N_TO_CLK			1
+
 struct platform_device;
 
 struct rtsx_slot {
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 2e3e2e0..3f2bf26 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -704,6 +704,7 @@ struct pcr_ops {
 	int		(*switch_output_voltage)(struct rtsx_pcr *pcr,
 						u8 voltage);
 	unsigned int	(*cd_deglitch)(struct rtsx_pcr *pcr);
+	int		(*conv_clk_and_div_n)(int clk, int dir);
 };
 
 enum PDEV_STAT  {PDEV_STAT_IDLE, PDEV_STAT_RUN};
-- 
1.7.9.5

[PATCH v3 6/8] MFD:rtsx: Add callback function conv_clk_and_div_n

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

Add callback function conv_clk_and_div_n to convert between SSC clock
and its divider N.
For rtl8411, the formula to calculate SSC clock divider N is different
with the other card reader models.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtl8411.c           |   13 +++++++++++++
 drivers/mfd/rts5209.c           |    1 +
 drivers/mfd/rts5229.c           |    1 +
 drivers/mfd/rtsx_pcr.c          |   14 ++++++++++++--
 include/linux/mfd/rtsx_common.h |    3 +++
 include/linux/mfd/rtsx_pci.h    |    1 +
 6 files changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 5058ba8..3d3b4ad 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -178,6 +178,18 @@ static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
 	return card_exist;
 }
 
+static int rtl8411_conv_clk_and_div_n(int input, int dir)
+{
+	int output;
+
+	if (dir == CLK_TO_DIV_N)
+		output = input * 4 / 5 - 2;
+	else
+		output = (input + 2) * 5 / 4;
+
+	return output;
+}
+
 static const struct pcr_ops rtl8411_pcr_ops = {
 	.extra_init_hw = rtl8411_extra_init_hw,
 	.optimize_phy = NULL,
@@ -189,6 +201,7 @@ static const struct pcr_ops rtl8411_pcr_ops = {
 	.card_power_off = rtl8411_card_power_off,
 	.switch_output_voltage = rtl8411_switch_output_voltage,
 	.cd_deglitch = rtl8411_cd_deglitch,
+	.conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
 };
 
 /* SD Pull Control Enable:
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index ba74de8..98fe0f3 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -174,6 +174,7 @@ static const struct pcr_ops rts5209_pcr_ops = {
 	.card_power_off = rts5209_card_power_off,
 	.switch_output_voltage = rts5209_switch_output_voltage,
 	.cd_deglitch = NULL,
+	.conv_clk_and_div_n = NULL,
 };
 
 /* SD Pull Control Enable:
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index ec1747a..29d889c 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -144,6 +144,7 @@ static const struct pcr_ops rts5229_pcr_ops = {
 	.card_power_off = rts5229_card_power_off,
 	.switch_output_voltage = rts5229_switch_output_voltage,
 	.cd_deglitch = NULL,
+	.conv_clk_and_div_n = NULL,
 };
 
 /* SD Pull Control Enable:
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 99e12b8..958b738 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -629,7 +629,10 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	if (clk == pcr->cur_clock)
 		return 0;
 
-	N = (u8)(clk - 2);
+	if (pcr->ops->conv_clk_and_div_n)
+		N = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
+	else
+		N = (u8)(clk - 2);
 	if ((clk <= 2) || (N > max_N))
 		return -EINVAL;
 
@@ -640,7 +643,14 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	/* Make sure that the SSC clock div_n is equal or greater than min_N */
 	div = CLK_DIV_1;
 	while ((N < min_N) && (div < max_div)) {
-		N = (N + 2) * 2 - 2;
+		if (pcr->ops->conv_clk_and_div_n) {
+			int dbl_clk = pcr->ops->conv_clk_and_div_n(N,
+					DIV_N_TO_CLK) * 2;
+			N = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk,
+					CLK_TO_DIV_N);
+		} else {
+			N = (N + 2) * 2 - 2;
+		}
 		div++;
 	}
 	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h
index a8d393e..2b13970 100644
--- a/include/linux/mfd/rtsx_common.h
+++ b/include/linux/mfd/rtsx_common.h
@@ -38,6 +38,9 @@
 #define RTSX_SD_CARD			0
 #define RTSX_MS_CARD			1
 
+#define CLK_TO_DIV_N			0
+#define DIV_N_TO_CLK			1
+
 struct platform_device;
 
 struct rtsx_slot {
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 2e3e2e0..3f2bf26 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -704,6 +704,7 @@ struct pcr_ops {
 	int		(*switch_output_voltage)(struct rtsx_pcr *pcr,
 						u8 voltage);
 	unsigned int	(*cd_deglitch)(struct rtsx_pcr *pcr);
+	int		(*conv_clk_and_div_n)(int clk, int dir);
 };
 
 enum PDEV_STAT  {PDEV_STAT_IDLE, PDEV_STAT_RUN};
-- 
1.7.9.5

[PATCH v3 7/8] MFD:rtsx: Fix checkpatch warning

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

WARNING: Avoid CamelCase: <min_N>
+	u8 N, min_N, max_N, clk_divider;

WARNING: Avoid CamelCase: <max_N>
+	u8 N, min_N, max_N, clk_divider;

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtsx_pcr.c |   26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 958b738..7632e7f 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -590,7 +590,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
 {
 	int err, clk;
-	u8 N, min_N, max_N, clk_divider;
+	u8 n, min_n, max_n, clk_divider;
 	u8 mcu_cnt, div, max_div;
 	u8 depth[] = {
 		[RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
@@ -615,8 +615,8 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	card_clock /= 1000000;
 	dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
 
-	min_N = 80;
-	max_N = 208;
+	min_n = 80;
+	max_n = 208;
 	max_div = CLK_DIV_8;
 
 	clk = card_clock;
@@ -630,30 +630,30 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		return 0;
 
 	if (pcr->ops->conv_clk_and_div_n)
-		N = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
+		n = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
 	else
-		N = (u8)(clk - 2);
-	if ((clk <= 2) || (N > max_N))
+		n = (u8)(clk - 2);
+	if ((clk <= 2) || (n > max_n))
 		return -EINVAL;
 
 	mcu_cnt = (u8)(125/clk + 3);
 	if (mcu_cnt > 15)
 		mcu_cnt = 15;
 
-	/* Make sure that the SSC clock div_n is equal or greater than min_N */
+	/* Make sure that the SSC clock div_n is equal or greater than min_n */
 	div = CLK_DIV_1;
-	while ((N < min_N) && (div < max_div)) {
+	while ((n < min_n) && (div < max_div)) {
 		if (pcr->ops->conv_clk_and_div_n) {
-			int dbl_clk = pcr->ops->conv_clk_and_div_n(N,
+			int dbl_clk = pcr->ops->conv_clk_and_div_n(n,
 					DIV_N_TO_CLK) * 2;
-			N = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk,
+			n = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk,
 					CLK_TO_DIV_N);
 		} else {
-			N = (N + 2) * 2 - 2;
+			n = (n + 2) * 2 - 2;
 		}
 		div++;
 	}
-	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
+	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", n, div);
 
 	ssc_depth = depth[ssc_depth];
 	if (double_clk)
@@ -670,7 +670,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2,
 			SSC_DEPTH_MASK, ssc_depth);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, N);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
 	if (vpclk) {
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
-- 
1.7.9.5

[PATCH v3 7/8] MFD:rtsx: Fix checkpatch warning

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

WARNING: Avoid CamelCase: <min_N>
+	u8 N, min_N, max_N, clk_divider;

WARNING: Avoid CamelCase: <max_N>
+	u8 N, min_N, max_N, clk_divider;

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
 drivers/mfd/rtsx_pcr.c |   26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 958b738..7632e7f 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -590,7 +590,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
 {
 	int err, clk;
-	u8 N, min_N, max_N, clk_divider;
+	u8 n, min_n, max_n, clk_divider;
 	u8 mcu_cnt, div, max_div;
 	u8 depth[] = {
 		[RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
@@ -615,8 +615,8 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	card_clock /= 1000000;
 	dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
 
-	min_N = 80;
-	max_N = 208;
+	min_n = 80;
+	max_n = 208;
 	max_div = CLK_DIV_8;
 
 	clk = card_clock;
@@ -630,30 +630,30 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		return 0;
 
 	if (pcr->ops->conv_clk_and_div_n)
-		N = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
+		n = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
 	else
-		N = (u8)(clk - 2);
-	if ((clk <= 2) || (N > max_N))
+		n = (u8)(clk - 2);
+	if ((clk <= 2) || (n > max_n))
 		return -EINVAL;
 
 	mcu_cnt = (u8)(125/clk + 3);
 	if (mcu_cnt > 15)
 		mcu_cnt = 15;
 
-	/* Make sure that the SSC clock div_n is equal or greater than min_N */
+	/* Make sure that the SSC clock div_n is equal or greater than min_n */
 	div = CLK_DIV_1;
-	while ((N < min_N) && (div < max_div)) {
+	while ((n < min_n) && (div < max_div)) {
 		if (pcr->ops->conv_clk_and_div_n) {
-			int dbl_clk = pcr->ops->conv_clk_and_div_n(N,
+			int dbl_clk = pcr->ops->conv_clk_and_div_n(n,
 					DIV_N_TO_CLK) * 2;
-			N = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk,
+			n = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk,
 					CLK_TO_DIV_N);
 		} else {
-			N = (N + 2) * 2 - 2;
+			n = (n + 2) * 2 - 2;
 		}
 		div++;
 	}
-	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
+	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", n, div);
 
 	ssc_depth = depth[ssc_depth];
 	if (double_clk)
@@ -670,7 +670,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2,
 			SSC_DEPTH_MASK, ssc_depth);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, N);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
 	if (vpclk) {
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
-- 
1.7.9.5

[PATCH v3 8/8] MFD:rtsx: Use macro defines to replace some variables

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

In function rtsx_pci_switch_clock, some variables, such as min_n, max_n,
and max_div, are not necessary. And those assigned values look very
obscure for others. It's more proper to use macro definitions here to
replace these variables.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Borislav Petkov <bp@alien8.de>
---
 drivers/mfd/rtsx_pcr.c |   13 ++++---------
 drivers/mfd/rtsx_pcr.h |    3 +++
 2 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 7632e7f..431a74c 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -590,8 +590,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
 {
 	int err, clk;
-	u8 n, min_n, max_n, clk_divider;
-	u8 mcu_cnt, div, max_div;
+	u8 n, clk_divider, mcu_cnt, div;
 	u8 depth[] = {
 		[RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
 		[RTSX_SSC_DEPTH_2M] = SSC_DEPTH_2M,
@@ -615,10 +614,6 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	card_clock /= 1000000;
 	dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
 
-	min_n = 80;
-	max_n = 208;
-	max_div = CLK_DIV_8;
-
 	clk = card_clock;
 	if (!initial_mode && double_clk)
 		clk = card_clock * 2;
@@ -633,16 +628,16 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		n = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
 	else
 		n = (u8)(clk - 2);
-	if ((clk <= 2) || (n > max_n))
+	if ((clk <= 2) || (n > MAX_DIV_N_PCR))
 		return -EINVAL;
 
 	mcu_cnt = (u8)(125/clk + 3);
 	if (mcu_cnt > 15)
 		mcu_cnt = 15;
 
-	/* Make sure that the SSC clock div_n is equal or greater than min_n */
+	/* Make sure that the SSC clock div_n is not less than MIN_DIV_N_PCR */
 	div = CLK_DIV_1;
-	while ((n < min_n) && (div < max_div)) {
+	while ((n < MIN_DIV_N_PCR) && (div < CLK_DIV_8)) {
 		if (pcr->ops->conv_clk_and_div_n) {
 			int dbl_clk = pcr->ops->conv_clk_and_div_n(n,
 					DIV_N_TO_CLK) * 2;
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 12462c1..33c210b 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -25,6 +25,9 @@
 
 #include <linux/mfd/rtsx_pci.h>
 
+#define MIN_DIV_N_PCR		80
+#define MAX_DIV_N_PCR		208
+
 void rts5209_init_params(struct rtsx_pcr *pcr);
 void rts5229_init_params(struct rtsx_pcr *pcr);
 void rtl8411_init_params(struct rtsx_pcr *pcr);
-- 
1.7.9.5

[PATCH v3 8/8] MFD:rtsx: Use macro defines to replace some variables

[wei_wang]

From: Wei WANG <wei_wang@realsil.com.cn>

In function rtsx_pci_switch_clock, some variables, such as min_n, max_n,
and max_div, are not necessary. And those assigned values look very
obscure for others. It's more proper to use macro definitions here to
replace these variables.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Borislav Petkov <bp@alien8.de>
---
 drivers/mfd/rtsx_pcr.c |   13 ++++---------
 drivers/mfd/rtsx_pcr.h |    3 +++
 2 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 7632e7f..431a74c 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -590,8 +590,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
 {
 	int err, clk;
-	u8 n, min_n, max_n, clk_divider;
-	u8 mcu_cnt, div, max_div;
+	u8 n, clk_divider, mcu_cnt, div;
 	u8 depth[] = {
 		[RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
 		[RTSX_SSC_DEPTH_2M] = SSC_DEPTH_2M,
@@ -615,10 +614,6 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 	card_clock /= 1000000;
 	dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
 
-	min_n = 80;
-	max_n = 208;
-	max_div = CLK_DIV_8;
-
 	clk = card_clock;
 	if (!initial_mode && double_clk)
 		clk = card_clock * 2;
@@ -633,16 +628,16 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		n = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
 	else
 		n = (u8)(clk - 2);
-	if ((clk <= 2) || (n > max_n))
+	if ((clk <= 2) || (n > MAX_DIV_N_PCR))
 		return -EINVAL;
 
 	mcu_cnt = (u8)(125/clk + 3);
 	if (mcu_cnt > 15)
 		mcu_cnt = 15;
 
-	/* Make sure that the SSC clock div_n is equal or greater than min_n */
+	/* Make sure that the SSC clock div_n is not less than MIN_DIV_N_PCR */
 	div = CLK_DIV_1;
-	while ((n < min_n) && (div < max_div)) {
+	while ((n < MIN_DIV_N_PCR) && (div < CLK_DIV_8)) {
 		if (pcr->ops->conv_clk_and_div_n) {
 			int dbl_clk = pcr->ops->conv_clk_and_div_n(n,
 					DIV_N_TO_CLK) * 2;
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 12462c1..33c210b 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -25,6 +25,9 @@
 
 #include <linux/mfd/rtsx_pci.h>
 
+#define MIN_DIV_N_PCR		80
+#define MAX_DIV_N_PCR		208
+
 void rts5209_init_params(struct rtsx_pcr *pcr);
 void rts5229_init_params(struct rtsx_pcr *pcr);
 void rtl8411_init_params(struct rtsx_pcr *pcr);
-- 
1.7.9.5

Re: [PATCH v3 3/8] MFD:rtsx: Declare that the DMA address limitation is 32bit explicitly

[Dan Carpenter]

On Fri, Dec 28, 2012 at 10:41:28AM +0800, wei_wang@realsil.com.cn wrote:
> From: Wei WANG <wei_wang@realsil.com.cn>
> 
> Realtek PCIe card reader only supports 32bit DMA
> 

Is this a bugfix?  If so what does the bug look like?

regards,
dan carpenter

Re: [PATCH v3 6/8] MFD:rtsx: Add callback function conv_clk_and_div_n

[Dan Carpenter]

On Fri, Dec 28, 2012 at 10:41:45AM +0800, wei_wang@realsil.com.cn wrote:
> diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
> index ba74de8..98fe0f3 100644
> --- a/drivers/mfd/rts5209.c
> +++ b/drivers/mfd/rts5209.c
> @@ -174,6 +174,7 @@ static const struct pcr_ops rts5209_pcr_ops = {
>  	.card_power_off = rts5209_card_power_off,
>  	.switch_output_voltage = rts5209_switch_output_voltage,
>  	.cd_deglitch = NULL,
> +	.conv_clk_and_div_n = NULL,

This isn't needed.  It's set to NULL by default.

> -	N = (u8)(clk - 2);
> +	if (pcr->ops->conv_clk_and_div_n)
> +		N = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
> +	else
> +		N = (u8)(clk - 2);

These unneeded casts are confusing.  Why are we doing them anyway?

regards,
dan carpenter

Re: [PATCH v3 7/8] MFD:rtsx: Fix checkpatch warning

[Dan Carpenter]

On Fri, Dec 28, 2012 at 10:41:52AM +0800, wei_wang@realsil.com.cn wrote:
> -	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div);
> +	dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", n, div);
                                   ^
The comment could be updated as well.

regards,
dan carpenter

Re: [PATCH v3 0/8] rtsx patchset for MFD and MMC tree

[Dan Carpenter]

Sorry, I'm flitting through my piles of email from the holidays in a
random order...

Could you please put a note in the v2, v3 version what changed
between each version and why it was resent?

regards,
dan carpenter

Re: [PATCH v3 3/8] MFD:rtsx: Declare that the DMA address limitationis32bit explicitly

[wwang]

于 2013年01月03日 20:25, Dan Carpenter 写道:
> On Fri, Dec 28, 2012 at 10:41:28AM +0800, wei_wang@realsil.com.cn wrote:
>> From: Wei WANG <wei_wang@realsil.com.cn>
>>
>> Realtek PCIe card reader only supports 32bit DMA
>>
> Is this a bugfix?  If so what does the bug look like?
>
> regards,
> dan carpenter
>
Hi Dan:

No, this is not a bugfix. In default, the kernel will allocate 32bit
address for DMA. This declaration can improve the readability.

BR,
wei wang
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

Re: [PATCH v3 3/8] MFD:rtsx: Declare that the DMA address limitationis32bit explicitly

[wwang]

于 2013年01月03日 20:25, Dan Carpenter 写道:
> On Fri, Dec 28, 2012 at 10:41:28AM +0800, wei_wang@realsil.com.cn wrote:
>> From: Wei WANG <wei_wang@realsil.com.cn>
>>
>> Realtek PCIe card reader only supports 32bit DMA
>>
> Is this a bugfix?  If so what does the bug look like?
>
> regards,
> dan carpenter
>
Hi Dan:

No, this is not a bugfix. In default, the kernel will allocate 32bit
address for DMA. This declaration can improve the readability.

BR,
wei wang

Re: [PATCH v3 3/8] MFD:rtsx: Declare that the DMA address limitationis32bit explicitly

[Dan Carpenter]

On Fri, Jan 04, 2013 at 10:46:22AM +0800, wwang wrote:
> 于 2013年01月03日 20:25, Dan Carpenter 写道:
> > On Fri, Dec 28, 2012 at 10:41:28AM +0800, wei_wang@realsil.com.cn wrote:
> >> From: Wei WANG <wei_wang@realsil.com.cn>
> >>
> >> Realtek PCIe card reader only supports 32bit DMA
> >>
> > Is this a bugfix?  If so what does the bug look like?
> >
> > regards,
> > dan carpenter
> >
> Hi Dan:
> 
> No, this is not a bugfix. In default, the kernel will allocate 32bit
> address for DMA. This declaration can improve the readability.
> 

Ah ok.  Really none of the things I mentioned were stuff that
prevented the patch from being merged or couldn't be fixed in follow
on patches.

The thing is that the commit message should always say why a patch
is needed.

regards,
dan carpenter