From: Joe MacDonald <Joe.MacDonald@windriver.com>
To: Lei Yang <lei.yang@windriver.com>
Cc: meta-virtualization@yoctoproject.org,
openembedded-devel@lists.openembedded.org
Subject: Re: [meta-virtualization] [meta-networking][PATCH] Add netcat-openbsd for virtualization (libvirt virt-test)
Date: Sun, 6 Jan 2013 21:09:38 -0500 [thread overview]
Message-ID: <20130107020937.GE9356@windriver.com> (raw)
In-Reply-To: <50EA2E1F.5010408@windriver.com>
[-- Attachment #1: Type: text/plain, Size: 5961 bytes --]
[Re: [meta-virtualization] [meta-networking][PATCH] Add netcat-openbsd for virtualization (libvirt virt-test)] On 13.01.07 (Mon 10:08) Lei Yang wrote:
> On 01/07/2013 10:03 AM, Lei Yang wrote:
> >On 01/07/2013 09:46 AM, Joe MacDonald wrote:
> >>[[meta-networking][PATCH] Add netcat-openbsd for virtualization
> >>(libvirt virt-test)] On 13.01.06 (Sun 13:17)
> >>lei.yang@windriver.com wrote:
> >>
> >>>From: Lei Yang<lei.yang@windriver.com>
> >>>
> >>>The netcat-openbsd in meta-virtualization layer has bugs.
> >>>This update version will fix "nc: Protocol no available." error.
> >>>As bruce point, we want to keep netcat in the meta-networking,
> >>>which meta-virtualization will depend on
> >>That's fine with me if that works for him, and having both netcat
> >>versions available is fine, I personally prefer the obsd one. I'll keep
>
> Do I need send a V2 for update the openbsd's priority ?
I don't think so. What priorities do you propose for each, though?
That's worth sending to the list, I think, since I know there are
strongly held opinions on each side of the netcat debate as to which is
superior. :-)
-J.
>
> Lei
>
> >>an eye out for your next version with the per-recipe alternative
> >>priorities.
> >>
> >>I didn't notice the discussion with Bruce, though, so at the risk of
> >>re-stating what you guys have already agreed upon, this will mean you're
> >>at least going to be cloning meta-oe to use meta-virtualization.
> >>meta-networking isn't a standalone layer for the most part. I maintain
> >>a read-only subtree project on github that is meta-networking separated
> >>from the rest of meta-oe, but it necessarily trails the meta-networking
> >>in meta-oe.
> >
> >Wait Bruce's comments
> >
> >Lei
> >
> >
> >
> >>I'm fine with the new recipe, just wanted to make sure you had all the
> >>information you needed.
> >>-J.
> >>
> >>>Lei
> >>>
> >>>Signed-off-by: Lei Yang<lei.yang@windriver.com>
> >>>---
> >>> .../recipes-support/netcat/netcat-openbsd_1.89.bb | 29
> >>>++++++++++++++++++++
> >>> meta-networking/recipes-support/netcat/netcat.inc | 6 ++++
> >>> .../recipes-support/netcat/netcat_0.7.1.bb | 11 +++----
> >>> 3 files changed, 40 insertions(+), 6 deletions(-)
> >>> create mode 100644
> >>>meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>> create mode 100644 meta-networking/recipes-support/netcat/netcat.inc
> >>>
> >>>diff --git
> >>>a/meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>>b/meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>>new file mode 100644
> >>>index 0000000..9fe406c
> >>>--- /dev/null
> >>>+++ b/meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>>@@ -0,0 +1,29 @@
> >>>+require netcat.inc
> >>>+DESCRIPTION = "OpenBSD Netcat"
> >>>+HOMEPAGE = "http://ftp.debian.org"
> >>>+LICENSE = "BSD-3-Clause"
> >>>+PR = "r0"
> >>>+
> >>>+SRC_URI = "${DEBIAN_MIRROR}/main/n/netcat-openbsd/netcat-openbsd_1.89.orig.tar.gz;name=netcat
> >>>\
> >>>+ ${DEBIAN_MIRROR}/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz;name=netcat-patch"
> >>>+
> >>>+SRC_URI[netcat.md5sum] = "7238ce15aae43069e96ba7faf03f153e"
> >>>+SRC_URI[netcat.sha256sum] =
> >>>"72e844dde8a2a7cba61971d493758dbea9ef0b164bccef15fd4a36490dc77f2b"
> >>>+SRC_URI[netcat-patch.md5sum] = "00c65aa22243b76998174c733cbb64cc"
> >>>+SRC_URI[netcat-patch.sha256sum] =
> >>>"d5b6b2bd9788114bdcfbb71acad0263720b4fdc41529e287adf451b8610f84f1"
> >>>+
> >>>+S = "${WORKDIR}/${PN}-${PV}.orig"
> >>>+
> >>>+do_configure[noexec] = "1"
> >>>+
> >>>+do_compile() {
> >>>+ cd ${S}
> >>>+ while read line; do patch -p1<debian/patches/$line;
> >>>done<debian/patches/series
> >>>+ pkgrel=4
> >>>+ oe_runmake CFLAGS="$CFLAGS -DDEBIAN_VERSION=\"\\\"${pkgrel}\\\"\""
> >>>+}
> >>>+
> >>>+do_install() {
> >>>+ install -d ${D}${bindir}
> >>>+ install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
> >>>+}
> >>>diff --git a/meta-networking/recipes-support/netcat/netcat.inc
> >>>b/meta-networking/recipes-support/netcat/netcat.inc
> >>>new file mode 100644
> >>>index 0000000..4098668
> >>>--- /dev/null
> >>>+++ b/meta-networking/recipes-support/netcat/netcat.inc
> >>>@@ -0,0 +1,6 @@
> >>>+SECTION = "console/network"
> >>>+inherit update-alternatives gettext
> >>>+
> >>>+ALTERNATIVE_${PN} = "nc"
> >>>+ALTERNATIVE_PRIORITY = "100"
> >>>+
> >>>diff --git
> >>>a/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>b/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>index c5ab85d..e09202b 100644
> >>>--- a/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>+++ b/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>@@ -1,21 +1,20 @@
> >>>+require netcat.inc
> >>> DESCRIPTION = "GNU Netcat"
> >>> HOMEPAGE = "http://netcat.sourceforge.net"
> >>>-SECTION = "console/network"
> >>> LICENSE = "GPLv2"
> >>> LIC_FILES_CHKSUM =
> >>>"file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
> >>>
> >>>-PR = "r0"
> >>>+PR = "r1"
> >>>
> >>> SRC_URI = "${SOURCEFORGE_MIRROR}/netcat/netcat-${PV}.tar.bz2"
> >>>
> >>> SRC_URI[md5sum] = "0a29eff1736ddb5effd0b1ec1f6fe0ef"
> >>> SRC_URI[sha256sum] =
> >>>"b55af0bbdf5acc02d1eb6ab18da2acd77a400bafd074489003f3df09676332bb"
> >>>
> >>>-inherit autotools update-alternatives gettext
> >>>+inherit autotools
> >>>
> >>> do_install_append() {
> >>>- mv ${D}${bindir}/nc ${D}${bindir}/nc.${PN}
> >>>+ install -d ${D}${bindir}
> >>>+ mv ${D}${bindir}/nc ${D}${bindir}/nc.${PN}
> >>> }
> >>>
> >>>-ALTERNATIVE_${PN} = "nc"
> >>>-ALTERNATIVE_PRIORITY = "100"
> >
> >_______________________________________________
> >meta-virtualization mailing list
> >meta-virtualization@yoctoproject.org
> >https://lists.yoctoproject.org/listinfo/meta-virtualization
>
--
-Joe MacDonald.
:wq
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Joe MacDonald <Joe.MacDonald@windriver.com>
To: Lei Yang <lei.yang@windriver.com>
Cc: meta-virtualization@yoctoproject.org,
openembedded-devel@lists.openembedded.org
Subject: Re: [meta-networking][PATCH] Add netcat-openbsd for virtualization (libvirt virt-test)
Date: Sun, 6 Jan 2013 21:09:38 -0500 [thread overview]
Message-ID: <20130107020937.GE9356@windriver.com> (raw)
In-Reply-To: <50EA2E1F.5010408@windriver.com>
[-- Attachment #1: Type: text/plain, Size: 5961 bytes --]
[Re: [meta-virtualization] [meta-networking][PATCH] Add netcat-openbsd for virtualization (libvirt virt-test)] On 13.01.07 (Mon 10:08) Lei Yang wrote:
> On 01/07/2013 10:03 AM, Lei Yang wrote:
> >On 01/07/2013 09:46 AM, Joe MacDonald wrote:
> >>[[meta-networking][PATCH] Add netcat-openbsd for virtualization
> >>(libvirt virt-test)] On 13.01.06 (Sun 13:17)
> >>lei.yang@windriver.com wrote:
> >>
> >>>From: Lei Yang<lei.yang@windriver.com>
> >>>
> >>>The netcat-openbsd in meta-virtualization layer has bugs.
> >>>This update version will fix "nc: Protocol no available." error.
> >>>As bruce point, we want to keep netcat in the meta-networking,
> >>>which meta-virtualization will depend on
> >>That's fine with me if that works for him, and having both netcat
> >>versions available is fine, I personally prefer the obsd one. I'll keep
>
> Do I need send a V2 for update the openbsd's priority ?
I don't think so. What priorities do you propose for each, though?
That's worth sending to the list, I think, since I know there are
strongly held opinions on each side of the netcat debate as to which is
superior. :-)
-J.
>
> Lei
>
> >>an eye out for your next version with the per-recipe alternative
> >>priorities.
> >>
> >>I didn't notice the discussion with Bruce, though, so at the risk of
> >>re-stating what you guys have already agreed upon, this will mean you're
> >>at least going to be cloning meta-oe to use meta-virtualization.
> >>meta-networking isn't a standalone layer for the most part. I maintain
> >>a read-only subtree project on github that is meta-networking separated
> >>from the rest of meta-oe, but it necessarily trails the meta-networking
> >>in meta-oe.
> >
> >Wait Bruce's comments
> >
> >Lei
> >
> >
> >
> >>I'm fine with the new recipe, just wanted to make sure you had all the
> >>information you needed.
> >>-J.
> >>
> >>>Lei
> >>>
> >>>Signed-off-by: Lei Yang<lei.yang@windriver.com>
> >>>---
> >>> .../recipes-support/netcat/netcat-openbsd_1.89.bb | 29
> >>>++++++++++++++++++++
> >>> meta-networking/recipes-support/netcat/netcat.inc | 6 ++++
> >>> .../recipes-support/netcat/netcat_0.7.1.bb | 11 +++----
> >>> 3 files changed, 40 insertions(+), 6 deletions(-)
> >>> create mode 100644
> >>>meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>> create mode 100644 meta-networking/recipes-support/netcat/netcat.inc
> >>>
> >>>diff --git
> >>>a/meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>>b/meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>>new file mode 100644
> >>>index 0000000..9fe406c
> >>>--- /dev/null
> >>>+++ b/meta-networking/recipes-support/netcat/netcat-openbsd_1.89.bb
> >>>@@ -0,0 +1,29 @@
> >>>+require netcat.inc
> >>>+DESCRIPTION = "OpenBSD Netcat"
> >>>+HOMEPAGE = "http://ftp.debian.org"
> >>>+LICENSE = "BSD-3-Clause"
> >>>+PR = "r0"
> >>>+
> >>>+SRC_URI = "${DEBIAN_MIRROR}/main/n/netcat-openbsd/netcat-openbsd_1.89.orig.tar.gz;name=netcat
> >>>\
> >>>+ ${DEBIAN_MIRROR}/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz;name=netcat-patch"
> >>>+
> >>>+SRC_URI[netcat.md5sum] = "7238ce15aae43069e96ba7faf03f153e"
> >>>+SRC_URI[netcat.sha256sum] =
> >>>"72e844dde8a2a7cba61971d493758dbea9ef0b164bccef15fd4a36490dc77f2b"
> >>>+SRC_URI[netcat-patch.md5sum] = "00c65aa22243b76998174c733cbb64cc"
> >>>+SRC_URI[netcat-patch.sha256sum] =
> >>>"d5b6b2bd9788114bdcfbb71acad0263720b4fdc41529e287adf451b8610f84f1"
> >>>+
> >>>+S = "${WORKDIR}/${PN}-${PV}.orig"
> >>>+
> >>>+do_configure[noexec] = "1"
> >>>+
> >>>+do_compile() {
> >>>+ cd ${S}
> >>>+ while read line; do patch -p1<debian/patches/$line;
> >>>done<debian/patches/series
> >>>+ pkgrel=4
> >>>+ oe_runmake CFLAGS="$CFLAGS -DDEBIAN_VERSION=\"\\\"${pkgrel}\\\"\""
> >>>+}
> >>>+
> >>>+do_install() {
> >>>+ install -d ${D}${bindir}
> >>>+ install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
> >>>+}
> >>>diff --git a/meta-networking/recipes-support/netcat/netcat.inc
> >>>b/meta-networking/recipes-support/netcat/netcat.inc
> >>>new file mode 100644
> >>>index 0000000..4098668
> >>>--- /dev/null
> >>>+++ b/meta-networking/recipes-support/netcat/netcat.inc
> >>>@@ -0,0 +1,6 @@
> >>>+SECTION = "console/network"
> >>>+inherit update-alternatives gettext
> >>>+
> >>>+ALTERNATIVE_${PN} = "nc"
> >>>+ALTERNATIVE_PRIORITY = "100"
> >>>+
> >>>diff --git
> >>>a/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>b/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>index c5ab85d..e09202b 100644
> >>>--- a/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>+++ b/meta-networking/recipes-support/netcat/netcat_0.7.1.bb
> >>>@@ -1,21 +1,20 @@
> >>>+require netcat.inc
> >>> DESCRIPTION = "GNU Netcat"
> >>> HOMEPAGE = "http://netcat.sourceforge.net"
> >>>-SECTION = "console/network"
> >>> LICENSE = "GPLv2"
> >>> LIC_FILES_CHKSUM =
> >>>"file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
> >>>
> >>>-PR = "r0"
> >>>+PR = "r1"
> >>>
> >>> SRC_URI = "${SOURCEFORGE_MIRROR}/netcat/netcat-${PV}.tar.bz2"
> >>>
> >>> SRC_URI[md5sum] = "0a29eff1736ddb5effd0b1ec1f6fe0ef"
> >>> SRC_URI[sha256sum] =
> >>>"b55af0bbdf5acc02d1eb6ab18da2acd77a400bafd074489003f3df09676332bb"
> >>>
> >>>-inherit autotools update-alternatives gettext
> >>>+inherit autotools
> >>>
> >>> do_install_append() {
> >>>- mv ${D}${bindir}/nc ${D}${bindir}/nc.${PN}
> >>>+ install -d ${D}${bindir}
> >>>+ mv ${D}${bindir}/nc ${D}${bindir}/nc.${PN}
> >>> }
> >>>
> >>>-ALTERNATIVE_${PN} = "nc"
> >>>-ALTERNATIVE_PRIORITY = "100"
> >
> >_______________________________________________
> >meta-virtualization mailing list
> >meta-virtualization@yoctoproject.org
> >https://lists.yoctoproject.org/listinfo/meta-virtualization
>
--
-Joe MacDonald.
:wq
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]
next prev parent reply other threads:[~2013-01-07 2:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-06 5:17 [meta-networking][PATCH] Add netcat-openbsd for virtualization (libvirt virt-test) lei.yang
2013-01-07 1:46 ` Joe MacDonald
2013-01-07 2:03 ` Lei Yang
2013-01-07 2:08 ` [meta-virtualization] " Lei Yang
2013-01-07 2:08 ` Lei Yang
2013-01-07 2:09 ` Joe MacDonald [this message]
2013-01-07 2:09 ` Joe MacDonald
2013-01-07 3:21 ` Bruce Ashfield
2013-01-07 3:21 ` Bruce Ashfield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130107020937.GE9356@windriver.com \
--to=joe.macdonald@windriver.com \
--cc=lei.yang@windriver.com \
--cc=meta-virtualization@yoctoproject.org \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.