Re: [PATCH] documentation: devicetree: Fix typo within Documentation/devicetree

[Grant Likely <grant.likely@secretlab.ca>]

On Mon, 14 Jan 2013 15:14:56 +0900, Masanari Iida <standby24x7@gmail.com> wrote:
> Correct spelling typos within Documentation/devicetree
> 
> Signed-off-by: Masanari Iida <standby24x7@gmail.com>

Applied, thanks.

g.

> ---
>  Documentation/devicetree/bindings/arm/atmel-aic.txt                | 2 +-
>  Documentation/devicetree/bindings/arm/exynos/power_domain.txt      | 2 +-
>  Documentation/devicetree/bindings/arm/gic.txt                      | 4 ++--
>  Documentation/devicetree/bindings/arm/omap/omap.txt                | 6 +++---
>  Documentation/devicetree/bindings/i2c/samsung-i2c.txt              | 2 +-
>  Documentation/devicetree/bindings/mips/cavium/dma-engine.txt       | 2 +-
>  Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt           | 6 +++---
>  Documentation/devicetree/bindings/mmc/samsung-sdhci.txt            | 2 +-
>  Documentation/devicetree/bindings/powerpc/fsl/srio.txt             | 4 ++--
>  Documentation/devicetree/bindings/regulator/tps62360-regulator.txt | 4 ++--
>  Documentation/devicetree/bindings/rtc/s3c-rtc.txt                  | 2 +-
>  Documentation/devicetree/bindings/watchdog/samsung-wdt.txt         | 2 +-
>  12 files changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
> index 19078bf..ad03121 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt
> @@ -4,7 +4,7 @@ Required properties:
>  - compatible: Should be "atmel,<chip>-aic"
>  - interrupt-controller: Identifies the node as an interrupt controller.
>  - interrupt-parent: For single AIC system, it is an empty property.
> -- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
> +- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
>    The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
>    The second cell is used to specify flags:
>      bits[3:0] trigger type and level flags:
> diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> index 6528e21..3fb457b 100644
> --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> @@ -4,7 +4,7 @@ Exynos processors include support for multiple power domains which are used
>  to gate power to one or more peripherals on the processor.
>  
>  Required Properties:
> -- compatiable: should be one of the following.
> +- compatible: should be one of the following.
>      * samsung,exynos4210-pd - for exynos4210 type power domain.
>  - reg: physical base address of the controller and length of memory mapped
>      region.
> diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
> index 62eb8df..3dfb0c0 100644
> --- a/Documentation/devicetree/bindings/arm/gic.txt
> +++ b/Documentation/devicetree/bindings/arm/gic.txt
> @@ -42,7 +42,7 @@ Main node required properties:
>  
>  Optional
>  - interrupts	: Interrupt source of the parent interrupt controller on
> -  secondary GICs, or VGIC maintainance interrupt on primary GIC (see
> +  secondary GICs, or VGIC maintenance interrupt on primary GIC (see
>    below).
>  
>  - cpu-offset	: per-cpu offset within the distributor and cpu interface
> @@ -74,7 +74,7 @@ Required properties:
>    virtual interface control register base and size. The 2nd additional
>    region is the GIC virtual cpu interface register base and size.
>  
> -- interrupts : VGIC maintainance interrupt.
> +- interrupts : VGIC maintenance interrupt.
>  
>  Example:
>  
> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
> index d0051a7..f8288ea 100644
> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
> @@ -39,16 +39,16 @@ Boards:
>  - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
>    compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
>  
> -- OMAP4 SDP : Software Developement Board
> +- OMAP4 SDP : Software Development Board
>    compatible = "ti,omap4-sdp", "ti,omap4430"
>  
>  - OMAP4 PandaBoard : Low cost community board
>    compatible = "ti,omap4-panda", "ti,omap4430"
>  
> -- OMAP3 EVM : Software Developement Board for OMAP35x, AM/DM37x
> +- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
>    compatible = "ti,omap3-evm", "ti,omap3"
>  
> -- AM335X EVM : Software Developement Board for AM335x
> +- AM335X EVM : Software Development Board for AM335x
>    compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
>  
>  - AM335X Bone : Low cost community board
> diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> index b6cb5a1..ccdf9c9 100644
> --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> @@ -18,7 +18,7 @@ Optional properties:
>      The gpio specifier depends on the gpio controller. Required in all
>      cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
>      lines are permanently wired to the respective client
> -  - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
> +  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
>      specified, default value is 0.
>    - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
>      specified, the default value in Hz is 100000.
> diff --git a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
> index cb4291e..a5bdff4 100644
> --- a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
> +++ b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
> @@ -1,7 +1,7 @@
>  * DMA Engine.
>  
>  The Octeon DMA Engine transfers between the Boot Bus and main memory.
> -The DMA Engine will be refered to by phandle by any device that is
> +The DMA Engine will be referred to by phandle by any device that is
>  connected to it.
>  
>  Properties:
> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> index 7927689..898b222 100644
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> @@ -11,11 +11,11 @@ Required Properties:
>  
>  * compatible: should be
>  	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
> -	  specific extentions.
> +	  specific extensions.
>  	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
> -	  specific extentions.
> +	  specific extensions.
>  	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
> -	  specific extentions.
> +	  specific extensions.
>  
>  * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
>    unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
> diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> index 630a7d7..43acfdf 100644
> --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> @@ -49,5 +49,5 @@ Example:
>  	};
>  
>  	Note: This example shows both SoC specific and board specific properties
> -	in a single device node. The properties can be actually be seperated
> +	in a single device node. The properties can be actually be separated
>  	into SoC specific node and board specific node.
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
> index b039bcb..07abf0f 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
> @@ -8,9 +8,9 @@ Properties:
>  	Definition: Must include "fsl,srio" for IP blocks with IP Block
>  	Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
>  
> -	Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
> +	Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major
>  	version in IP Block Revision Register and Y is Minor version.  If this
> -	compatiable is provided it should be ordered before "fsl,srio".
> +	compatible is provided it should be ordered before "fsl,srio".
>  
>     - reg
>  	Usage: required
> diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
> index c8ca6b8..1b20c3d 100644
> --- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
> @@ -17,9 +17,9 @@ Optional properties:
>  - ti,vsel1-gpio: Gpio for controlling VSEL1 line.
>    If this property is missing, then assume that there is no GPIO
>    for vsel1 control.
> -- ti,vsel0-state-high: Inital state of vsel0 input is high.
> +- ti,vsel0-state-high: Initial state of vsel0 input is high.
>    If this property is missing, then assume the state as low (0).
> -- ti,vsel1-state-high: Inital state of vsel1 input is high.
> +- ti,vsel1-state-high: Initial state of vsel1 input is high.
>    If this property is missing, then assume the state as low (0).
>  
>  Any property defined as part of the core regulator binding, defined in
> diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> index 90ec45f..7ac7259 100644
> --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> @@ -7,7 +7,7 @@ Required properties:
>  - reg: physical base address of the controller and length of memory mapped
>    region.
>  - interrupts: Two interrupt numbers to the cpu should be specified. First
> -  interrupt number is the rtc alarm interupt and second interrupt number
> +  interrupt number is the rtc alarm interrupt and second interrupt number
>    is the rtc tick interrupt. The number of cells representing a interrupt
>    depends on the parent interrupt controller.
>  
> diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
> index 79ead82..ce0d8e7 100644
> --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
> @@ -2,7 +2,7 @@
>  
>  The Samsung's Watchdog controller is used for resuming system operation
>  after a preset amount of time during which the WDT reset event has not
> -occured.
> +occurred.
>  
>  Required properties:
>  - compatible : should be "samsung,s3c2410-wdt"
> -- 
> 1.8.1.336.g94702dd
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.