From: "Heiko Stübner" <heiko@sntech.de>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: ben-linux@fluff.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
"Heiko Stübner" <heiko@sntech.de>
Subject: [PATCH v3 0/9] ARM: S3C24XX: rework irq handling for a later dt usage
Date: Sat, 19 Jan 2013 04:03:50 +0100 [thread overview]
Message-ID: <201301190403.50317.heiko@sntech.de> (raw)
Third version of redoing the s3c24xx irqs in a generic way by using a
declarative approach.
Main change is the different approach to the init. Moved the
s3c24xx_init_intc function from the dt patchset here, so that both init types
(dt and non-dt) can use a similar init scheme.
As in the second version, the 1st patch might be hard to read due to the
rewrite character, but I didn't see a way to do these changes in individual
steps. So it might be helpful to look at the result after applying this patch.
Runtime-tested on a s3c2416 based board and compile tested for the others.
As also written before, inclusion of the other S3C24XX SoCs to follow once
the general approach is acceptable.
Applies to the most current for-next (from two hours ago) from linux-samsung
Heiko Stuebner (9):
ARM: S3C24XX: transform irq handling into a declarative form
ARM: S3C24XX: Move irq syscore-ops to irq-pm
ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
ARM: S3C24XX: move s3c2416 irq init to common irq code
ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
ARM: S3C24XX: transform s3c2416 irqs into new structure
ARM: S3C24XX: move s3c2443 irq code to irq.c
ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
ARM: S3C24XX: transform s3c2443 subirqs into new structure
arch/arm/mach-s3c24xx/Makefile | 4 +-
arch/arm/mach-s3c24xx/common.h | 2 +
arch/arm/mach-s3c24xx/irq-pm.c | 41 +-
arch/arm/mach-s3c24xx/irq-s3c2416.c | 348 --------
arch/arm/mach-s3c24xx/irq-s3c2443.c | 281 -------
arch/arm/mach-s3c24xx/mach-smdk2416.c | 2 +-
arch/arm/mach-s3c24xx/mach-smdk2443.c | 2 +-
arch/arm/mach-s3c24xx/s3c2410.c | 4 +-
arch/arm/mach-s3c24xx/s3c2412.c | 4 +-
arch/arm/mach-s3c24xx/s3c2416.c | 4 +-
arch/arm/mach-s3c24xx/s3c2440.c | 4 +-
arch/arm/mach-s3c24xx/s3c2442.c | 4 +-
arch/arm/plat-s3c24xx/Kconfig | 1 +
arch/arm/plat-s3c24xx/irq.c | 1110 +++++++++++++++-----------
arch/arm/plat-samsung/include/plat/pm.h | 6 -
arch/arm/plat-samsung/include/plat/s3c2416.h | 1 +
arch/arm/plat-samsung/include/plat/s3c2443.h | 2 +
17 files changed, 688 insertions(+), 1132 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2416.c
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2443.c
--
1.7.2.3
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/9] ARM: S3C24XX: rework irq handling for a later dt usage
Date: Sat, 19 Jan 2013 04:03:50 +0100 [thread overview]
Message-ID: <201301190403.50317.heiko@sntech.de> (raw)
Third version of redoing the s3c24xx irqs in a generic way by using a
declarative approach.
Main change is the different approach to the init. Moved the
s3c24xx_init_intc function from the dt patchset here, so that both init types
(dt and non-dt) can use a similar init scheme.
As in the second version, the 1st patch might be hard to read due to the
rewrite character, but I didn't see a way to do these changes in individual
steps. So it might be helpful to look at the result after applying this patch.
Runtime-tested on a s3c2416 based board and compile tested for the others.
As also written before, inclusion of the other S3C24XX SoCs to follow once
the general approach is acceptable.
Applies to the most current for-next (from two hours ago) from linux-samsung
Heiko Stuebner (9):
ARM: S3C24XX: transform irq handling into a declarative form
ARM: S3C24XX: Move irq syscore-ops to irq-pm
ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
ARM: S3C24XX: move s3c2416 irq init to common irq code
ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
ARM: S3C24XX: transform s3c2416 irqs into new structure
ARM: S3C24XX: move s3c2443 irq code to irq.c
ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
ARM: S3C24XX: transform s3c2443 subirqs into new structure
arch/arm/mach-s3c24xx/Makefile | 4 +-
arch/arm/mach-s3c24xx/common.h | 2 +
arch/arm/mach-s3c24xx/irq-pm.c | 41 +-
arch/arm/mach-s3c24xx/irq-s3c2416.c | 348 --------
arch/arm/mach-s3c24xx/irq-s3c2443.c | 281 -------
arch/arm/mach-s3c24xx/mach-smdk2416.c | 2 +-
arch/arm/mach-s3c24xx/mach-smdk2443.c | 2 +-
arch/arm/mach-s3c24xx/s3c2410.c | 4 +-
arch/arm/mach-s3c24xx/s3c2412.c | 4 +-
arch/arm/mach-s3c24xx/s3c2416.c | 4 +-
arch/arm/mach-s3c24xx/s3c2440.c | 4 +-
arch/arm/mach-s3c24xx/s3c2442.c | 4 +-
arch/arm/plat-s3c24xx/Kconfig | 1 +
arch/arm/plat-s3c24xx/irq.c | 1110 +++++++++++++++-----------
arch/arm/plat-samsung/include/plat/pm.h | 6 -
arch/arm/plat-samsung/include/plat/s3c2416.h | 1 +
arch/arm/plat-samsung/include/plat/s3c2443.h | 2 +
17 files changed, 688 insertions(+), 1132 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2416.c
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2443.c
--
1.7.2.3
next reply other threads:[~2013-01-19 3:03 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-19 3:03 Heiko Stübner [this message]
2013-01-19 3:03 ` [PATCH v3 0/9] ARM: S3C24XX: rework irq handling for a later dt usage Heiko Stübner
2013-01-19 3:04 ` [PATCH v3 1/9] ARM: S3C24XX: transform irq handling into a declarative form Heiko Stübner
2013-01-19 3:04 ` Heiko Stübner
2013-01-19 3:05 ` [PATCH v3 2/9] ARM: S3C24XX: Move irq syscore-ops to irq-pm Heiko Stübner
2013-01-19 3:05 ` Heiko Stübner
2013-01-19 3:06 ` [PATCH v3 3/9] ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property Heiko Stübner
2013-01-19 3:06 ` Heiko Stübner
2013-01-19 3:07 ` [PATCH v3 4/9] ARM: S3C24XX: move s3c2416 irq init to common irq code Heiko Stübner
2013-01-19 3:07 ` Heiko Stübner
2013-01-19 3:07 ` [PATCH v3 5/9] ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs Heiko Stübner
2013-01-19 3:07 ` Heiko Stübner
2013-01-19 3:09 ` [PATCH v3 6/9] ARM: S3C24XX: transform s3c2416 irqs into new structure Heiko Stübner
2013-01-19 3:09 ` Heiko Stübner
2013-01-19 3:10 ` [PATCH v3 7/9] ARM: S3C24XX: move s3c2443 irq code to irq.c Heiko Stübner
2013-01-19 3:10 ` Heiko Stübner
2013-01-19 3:11 ` [PATCH v3 8/9] ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs Heiko Stübner
2013-01-19 3:11 ` Heiko Stübner
2013-01-19 3:12 ` [PATCH v3 9/9] ARM: S3C24XX: transform s3c2443 subirqs into new structure Heiko Stübner
2013-01-19 3:12 ` Heiko Stübner
2013-01-25 18:59 ` [PATCH v3 0/9] ARM: S3C24XX: rework irq handling for a later dt usage Kukjin Kim
2013-01-25 18:59 ` Kukjin Kim
2013-01-27 11:41 ` Heiko Stübner
2013-01-27 11:41 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201301190403.50317.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.