* [PATCH v2 00/10] ARM: S3C24XX: irq rework for S3C2412, S3C2440 and S3C2442
@ 2013-02-09 17:11 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:11 UTC (permalink / raw)
To: linux-arm-kernel
This series finishes the irq rework by moving the irqs for s3c2412, s3c2440
and s3c2442 into the new structure.
Now the only open point is the different handling of the eint0 to eint3
interrupts on the s3c2412. On this SoC these interrupts are represented
in both the main register and the eint register and also need to be handled
in both.
As this should be handlable via the new structure, I'm still investigating
the right way to do it. Therefore the override of the eint0 to eint3
interrupts will still remain for a bit.
As I lack the relevant hardware, this series is compile tested only, but as
the used mechanisms are the same as with the s3c2416, there shouldn't be
any complications.
This series applies on top of the moved s3c24XX.h headers into the common.h
file in mach-s3c24xx.
changes since v1:
- included the changes for the s3c2412
Heiko Stuebner (10):
ARM: S3C24XX: move s3c244x irq init to common irq code
ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
ARM: S3C24XX: move s3c2440 irqs to common irq code
ARM: S3C24XX: integrate s3c2440 irqs into common init
ARM: S3C24XX: transform s3c2442 irqs into new structure
ARM: S3C24XX: transform s3c2440 irqs into new structure
ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm
ARM: S3C24XX: move s3c2412 irq init to common code
ARM: S3C24XX: modify s3c2412 irq init to initialize all irqs
ARM: S3C24XX: transform s3c2412 irqs into new structure
arch/arm/mach-s3c24xx/Kconfig | 1 +
arch/arm/mach-s3c24xx/Makefile | 6 +-
arch/arm/mach-s3c24xx/common.h | 3 +
arch/arm/mach-s3c24xx/irq-s3c2412.c | 215 -----------------------
arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 --------------
arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 ---------------
arch/arm/mach-s3c24xx/irq.c | 299 ++++++++++++++++++++++++++++++++
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +-
arch/arm/mach-s3c24xx/mach-smdk2413.c | 6 +-
arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c24xx/pm-s3c2412.c | 8 +
20 files changed, 328 insertions(+), 507 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2412.c
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
--
1.7.2.3
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v2 01/10] ARM: S3C24XX: move s3c244x irq init to common irq code
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:12 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:12 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Base for further modifications.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 105 ++++++++++++++++++++++++++
3 files changed, 106 insertions(+), 143 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index af53d27..051b8f9 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -33,7 +33,7 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c
deleted file mode 100644
index 5fe8e58..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c244x.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
- /* add chained handler for camera */
-
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index cb9f5e0..95f971f 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,6 +731,111 @@ void __init s3c2416_init_irq(void)
#endif
+#ifdef CONFIG_CPU_S3C244X
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 11;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_CAM_C);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_CAM_P);
+ }
+ }
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static void
+s3c_irq_cam_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static struct irq_chip s3c_irq_cam = {
+ .irq_mask = s3c_irq_cam_mask,
+ .irq_unmask = s3c_irq_cam_unmask,
+ .irq_ack = s3c_irq_cam_ack,
+};
+
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+ /* add chained handler for camera */
+
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
+static struct subsys_interface s3c2442_irq_interface = {
+ .name = "s3c2442_irq",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+
+static int s3c2442_irq_init(void)
+{
+ return subsys_interface_register(&s3c2442_irq_interface);
+}
+
+arch_initcall(s3c2442_irq_init);
+#endif
+
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 01/10] ARM: S3C24XX: move s3c244x irq init to common irq code
@ 2013-02-09 17:12 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:12 UTC (permalink / raw)
To: linux-arm-kernel
Base for further modifications.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 105 ++++++++++++++++++++++++++
3 files changed, 106 insertions(+), 143 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index af53d27..051b8f9 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -33,7 +33,7 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c
deleted file mode 100644
index 5fe8e58..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c244x.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
- /* add chained handler for camera */
-
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index cb9f5e0..95f971f 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,6 +731,111 @@ void __init s3c2416_init_irq(void)
#endif
+#ifdef CONFIG_CPU_S3C244X
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 11;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_CAM_C);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_CAM_P);
+ }
+ }
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static void
+s3c_irq_cam_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
+}
+
+static struct irq_chip s3c_irq_cam = {
+ .irq_mask = s3c_irq_cam_mask,
+ .irq_unmask = s3c_irq_cam_unmask,
+ .irq_ack = s3c_irq_cam_ack,
+};
+
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+ /* add chained handler for camera */
+
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
+static struct subsys_interface s3c2442_irq_interface = {
+ .name = "s3c2442_irq",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c244x_irq_add,
+};
+
+
+static int s3c2442_irq_init(void)
+{
+ return subsys_interface_register(&s3c2442_irq_interface);
+}
+
+arch_initcall(s3c2442_irq_init);
+#endif
+
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 02/10] ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:12 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:12 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
s3c2440 and s3c2442 need separate init functions, as the s3c2440 contains
even more differing irqs that will be moved in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/common.h | 2 +
arch/arm/mach-s3c24xx/irq.c | 45 ++++++++++++++++---------------
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +----
arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
11 files changed, 34 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 8a2b413..362a8cd 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -73,6 +73,7 @@ extern void s3c244x_restart(char mode, const char *cmd);
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
extern void s3c2440_map_io(void);
+extern void s3c2440_init_irq(void);
#else
#define s3c2440_init NULL
#define s3c2440_map_io NULL
@@ -81,6 +82,7 @@ extern void s3c2440_map_io(void);
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
extern void s3c2442_map_io(void);
+extern void s3c2442_init_irq(void);
#else
#define s3c2442_init NULL
#define s3c2442_map_io NULL
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 95f971f..c544e00 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -785,10 +785,13 @@ static struct irq_chip s3c_irq_cam = {
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+#ifdef CONFIG_CPU_S3C2440
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
+ s3c24xx_init_irq();
+
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
handle_level_irq);
set_irq_flags(IRQ_NFCON, IRQF_VALID);
@@ -804,36 +807,34 @@ static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- return 0;
}
+#endif
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
+#ifdef CONFIG_CPU_S3C2442
+void __init s3c2442_init_irq(void)
{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
+ unsigned int irqno;
-arch_initcall(s3c2440_irq_init);
+ s3c24xx_init_irq();
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ /* add chained handler for camera */
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
+#endif
-arch_initcall(s3c2442_irq_init);
#endif
#ifdef CONFIG_CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 24f1a04..c1fb6c3 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -445,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 2bf6c8c..6dfeeb7 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -211,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 84a750d..13d8d07 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -589,7 +589,7 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.atag_offset = 0x100,
.map_io = gta02_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 29f106c..a83db46 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -688,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440")
.atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 5c826d1..01f4354 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -152,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ef3a7b0..de78fbb 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -425,7 +425,7 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 64b52a9..44ca018 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -812,7 +812,7 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 0a3c964..3bc6231 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -190,11 +190,6 @@ static void __init rx3715_reserve(void)
memblock_reserve(0x30081000, 0x1000);
}
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init rx3715_init_machine(void)
{
#ifdef CONFIG_PM_H1940
@@ -212,7 +207,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
- .init_irq = rx3715_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 3f13e85..90be6d0 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -178,7 +178,7 @@ MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.init_time = samsung_timer_init,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 02/10] ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
@ 2013-02-09 17:12 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:12 UTC (permalink / raw)
To: linux-arm-kernel
s3c2440 and s3c2442 need separate init functions, as the s3c2440 contains
even more differing irqs that will be moved in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/common.h | 2 +
arch/arm/mach-s3c24xx/irq.c | 45 ++++++++++++++++---------------
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +----
arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
11 files changed, 34 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 8a2b413..362a8cd 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -73,6 +73,7 @@ extern void s3c244x_restart(char mode, const char *cmd);
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
extern void s3c2440_map_io(void);
+extern void s3c2440_init_irq(void);
#else
#define s3c2440_init NULL
#define s3c2440_map_io NULL
@@ -81,6 +82,7 @@ extern void s3c2440_map_io(void);
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
extern void s3c2442_map_io(void);
+extern void s3c2442_init_irq(void);
#else
#define s3c2442_init NULL
#define s3c2442_map_io NULL
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 95f971f..c544e00 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -785,10 +785,13 @@ static struct irq_chip s3c_irq_cam = {
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
+#ifdef CONFIG_CPU_S3C2440
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
+ s3c24xx_init_irq();
+
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
handle_level_irq);
set_irq_flags(IRQ_NFCON, IRQF_VALID);
@@ -804,36 +807,34 @@ static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- return 0;
}
+#endif
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
+#ifdef CONFIG_CPU_S3C2442
+void __init s3c2442_init_irq(void)
{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
+ unsigned int irqno;
-arch_initcall(s3c2440_irq_init);
+ s3c24xx_init_irq();
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
+ irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
+ handle_level_irq);
+ set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ /* add chained handler for camera */
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
+ irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+ for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_cam,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
+#endif
-arch_initcall(s3c2442_irq_init);
#endif
#ifdef CONFIG_CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 24f1a04..c1fb6c3 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -445,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 2bf6c8c..6dfeeb7 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -211,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 84a750d..13d8d07 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -589,7 +589,7 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.atag_offset = 0x100,
.map_io = gta02_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 29f106c..a83db46 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -688,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440")
.atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 5c826d1..01f4354 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -152,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ef3a7b0..de78fbb 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -425,7 +425,7 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 64b52a9..44ca018 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -812,7 +812,7 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 0a3c964..3bc6231 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -190,11 +190,6 @@ static void __init rx3715_reserve(void)
memblock_reserve(0x30081000, 0x1000);
}
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init rx3715_init_machine(void)
{
#ifdef CONFIG_PM_H1940
@@ -212,7 +207,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
- .init_irq = rx3715_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
.init_time = samsung_timer_init,
.restart = s3c244x_restart,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 3f13e85..90be6d0 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -178,7 +178,7 @@ MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.init_time = samsung_timer_init,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 03/10] ARM: S3C24XX: move s3c2440 irqs to common irq code
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:13 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:13 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Will be integrated in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 88 ++++++++++++++++++++++++
3 files changed, 89 insertions(+), 129 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 051b8f9..9041260 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c
deleted file mode 100644
index 4a18cde..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2440.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index c544e00..592072b 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -786,6 +786,94 @@ static struct irq_chip s3c_irq_cam = {
};
#ifdef CONFIG_CPU_S3C2440
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 13;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_WDT);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_AC97);
+ }
+ }
+}
+
+
+#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+ .irq_mask = s3c_irq_wdtac97_mask,
+ .irq_unmask = s3c_irq_wdtac97_unmask,
+ .irq_ack = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ printk("S3C2440: IRQ Support\n");
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
void __init s3c2440_init_irq(void)
{
unsigned int irqno;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 03/10] ARM: S3C24XX: move s3c2440 irqs to common irq code
@ 2013-02-09 17:13 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:13 UTC (permalink / raw)
To: linux-arm-kernel
Will be integrated in the following patch.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 88 ++++++++++++++++++++++++
3 files changed, 89 insertions(+), 129 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 051b8f9..9041260 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c
deleted file mode 100644
index 4a18cde..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2440.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index c544e00..592072b 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -786,6 +786,94 @@ static struct irq_chip s3c_irq_cam = {
};
#ifdef CONFIG_CPU_S3C2440
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 13;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ generic_handle_irq(IRQ_S3C2440_WDT);
+ }
+ if (subsrc & 2) {
+ generic_handle_irq(IRQ_S3C2440_AC97);
+ }
+ }
+}
+
+
+#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+ .irq_mask = s3c_irq_wdtac97_mask,
+ .irq_unmask = s3c_irq_wdtac97_unmask,
+ .irq_ack = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ printk("S3C2440: IRQ Support\n");
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_irq_interface = {
+ .name = "s3c2440_irq",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return subsys_interface_register(&s3c2440_irq_interface);
+}
+
+arch_initcall(s3c2440_irq_init);
+
void __init s3c2440_init_irq(void)
{
unsigned int irqno;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 04/10] ARM: S3C24XX: integrate s3c2440 irqs into common init
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:14 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:14 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Now all the arch_initcalls for s3c244x irqs are gone.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 46 ++++++++++++------------------------------
1 files changed, 13 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 592072b..998e6a8 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -840,44 +840,12 @@ static struct irq_chip s3c_irq_wdtac97 = {
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
printk("S3C2440: IRQ Support\n");
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-void __init s3c2440_init_irq(void)
-{
- unsigned int irqno;
-
s3c24xx_init_irq();
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
@@ -895,6 +863,18 @@ void __init s3c2440_init_irq(void)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 04/10] ARM: S3C24XX: integrate s3c2440 irqs into common init
@ 2013-02-09 17:14 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:14 UTC (permalink / raw)
To: linux-arm-kernel
Now all the arch_initcalls for s3c244x irqs are gone.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 46 ++++++++++++------------------------------
1 files changed, 13 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 592072b..998e6a8 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -840,44 +840,12 @@ static struct irq_chip s3c_irq_wdtac97 = {
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
+void __init s3c2440_init_irq(void)
{
unsigned int irqno;
printk("S3C2440: IRQ Support\n");
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-void __init s3c2440_init_irq(void)
-{
- unsigned int irqno;
-
s3c24xx_init_irq();
irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
@@ -895,6 +863,18 @@ void __init s3c2440_init_irq(void)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
+
+ /* add new chained handler for wdt, ac7 */
+
+ irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
+ handle_level_irq);
+ irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 05/10] ARM: S3C24XX: transform s3c2442 irqs into new structure
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:15 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:15 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Simply declare a correct mapping structure to use the common irq code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 78 ++++++++++++++++++++++++++++++++++--------
1 files changed, 63 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 998e6a8..01358a5 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -879,27 +879,75 @@ void __init s3c2440_init_irq(void)
#endif
#ifdef CONFIG_CPU_S3C2442
-void __init s3c2442_init_irq(void)
-{
- unsigned int irqno;
+static struct s3c_irq_data init_s3c2442base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
- s3c24xx_init_irq();
+static struct s3c_irq_data init_s3c2442subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+};
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+void __init s3c2442_init_irq(void)
+{
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2442: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
+
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018);
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 05/10] ARM: S3C24XX: transform s3c2442 irqs into new structure
@ 2013-02-09 17:15 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:15 UTC (permalink / raw)
To: linux-arm-kernel
Simply declare a correct mapping structure to use the common irq code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 78 ++++++++++++++++++++++++++++++++++--------
1 files changed, 63 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 998e6a8..01358a5 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -879,27 +879,75 @@ void __init s3c2440_init_irq(void)
#endif
#ifdef CONFIG_CPU_S3C2442
-void __init s3c2442_init_irq(void)
-{
- unsigned int irqno;
+static struct s3c_irq_data init_s3c2442base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
- s3c24xx_init_irq();
+static struct s3c_irq_data init_s3c2442subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+};
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+void __init s3c2442_init_irq(void)
+{
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2442: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
+
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018);
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 06/10] ARM: S3C24XX: transform s3c2440 irqs into new structure
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:16 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:16 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
As always a mapping structure is everything needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 196 +++++++++++++-----------------------------
1 files changed, 61 insertions(+), 135 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 01358a5..26b17a1 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,150 +731,78 @@ void __init s3c2416_init_irq(void)
#endif
-#ifdef CONFIG_CPU_S3C244X
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
#ifdef CONFIG_CPU_S3C2440
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
+static struct s3c_irq_data init_s3c2440base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
+static struct s3c_irq_data init_s3c2440subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
};
void __init s3c2440_init_irq(void)
{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- s3c24xx_init_irq();
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2440: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018);
}
#endif
@@ -951,8 +879,6 @@ void __init s3c2442_init_irq(void)
}
#endif
-#endif
-
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 06/10] ARM: S3C24XX: transform s3c2440 irqs into new structure
@ 2013-02-09 17:16 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:16 UTC (permalink / raw)
To: linux-arm-kernel
As always a mapping structure is everything needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 196 +++++++++++++-----------------------------
1 files changed, 61 insertions(+), 135 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 01358a5..26b17a1 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -731,150 +731,78 @@ void __init s3c2416_init_irq(void)
#endif
-#ifdef CONFIG_CPU_S3C244X
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
#ifdef CONFIG_CPU_S3C2440
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
+static struct s3c_irq_data init_s3c2440base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
+static struct s3c_irq_data init_s3c2440subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
};
void __init s3c2440_init_irq(void)
{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- s3c24xx_init_irq();
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
+ struct s3c_irq_intc *main_intc;
- /* add chained handler for camera */
+ pr_info("S3C2440: IRQ Support\n");
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
}
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018);
}
#endif
@@ -951,8 +879,6 @@ void __init s3c2442_init_irq(void)
}
#endif
-#endif
-
#ifdef CONFIG_CPU_S3C2443
static struct s3c_irq_data init_s3c2443base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 07/10] ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:17 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:17 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Originally the s3c2412 used a overidden irq chip to set the rtc wakeup flag.
But with using the samsung_sync_wakemask function the same can be achieved
without introducing soc specific irq functions.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 1 +
arch/arm/mach-s3c24xx/irq-s3c2412.c | 23 -----------------------
arch/arm/mach-s3c24xx/pm-s3c2412.c | 8 ++++++++
3 files changed, 9 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 876393e..0dca380 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -406,6 +406,7 @@ config S3C2412_DMA
config S3C2412_PM
bool
select S3C2412_PM_SLEEP
+ select SAMSUNG_WAKEMASK
help
Internal config node to apply S3C2412 power management
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
index 67d7631..e6fd954 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c
@@ -155,22 +155,6 @@ static struct irq_chip s3c2412_irq_cfsdi = {
.irq_unmask = s3c2412_irq_cfsdi_unmask,
};
-static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long pwrcfg;
-
- pwrcfg = __raw_readl(S3C2412_PWRCFG);
- if (state)
- pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
- else
- pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
- __raw_writel(pwrcfg, S3C2412_PWRCFG);
-
- return s3c_irq_chip.irq_set_wake(data, state);
-}
-
-static struct irq_chip s3c2412_irq_rtc_chip;
-
static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
@@ -191,13 +175,6 @@ static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
set_irq_flags(irqno, IRQF_VALID);
}
- /* change RTC IRQ's set wake method */
-
- s3c2412_irq_rtc_chip = s3c_irq_chip;
- s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake;
-
- irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
-
return 0;
}
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index 4c4bc1c..d75f95e 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -29,6 +29,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/wakeup-mask.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
@@ -51,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg)
return 1; /* Aborting suspend */
}
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask wake_irqs[] = {
+ { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
+};
+
static void s3c2412_pm_prepare(void)
{
+ samsung_sync_wakemask(S3C2412_PWRCFG,
+ wake_irqs, ARRAY_SIZE(wake_irqs));
}
static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 07/10] ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm
@ 2013-02-09 17:17 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:17 UTC (permalink / raw)
To: linux-arm-kernel
Originally the s3c2412 used a overidden irq chip to set the rtc wakeup flag.
But with using the samsung_sync_wakemask function the same can be achieved
without introducing soc specific irq functions.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 1 +
arch/arm/mach-s3c24xx/irq-s3c2412.c | 23 -----------------------
arch/arm/mach-s3c24xx/pm-s3c2412.c | 8 ++++++++
3 files changed, 9 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 876393e..0dca380 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -406,6 +406,7 @@ config S3C2412_DMA
config S3C2412_PM
bool
select S3C2412_PM_SLEEP
+ select SAMSUNG_WAKEMASK
help
Internal config node to apply S3C2412 power management
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
index 67d7631..e6fd954 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c
@@ -155,22 +155,6 @@ static struct irq_chip s3c2412_irq_cfsdi = {
.irq_unmask = s3c2412_irq_cfsdi_unmask,
};
-static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long pwrcfg;
-
- pwrcfg = __raw_readl(S3C2412_PWRCFG);
- if (state)
- pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
- else
- pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
- __raw_writel(pwrcfg, S3C2412_PWRCFG);
-
- return s3c_irq_chip.irq_set_wake(data, state);
-}
-
-static struct irq_chip s3c2412_irq_rtc_chip;
-
static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
@@ -191,13 +175,6 @@ static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
set_irq_flags(irqno, IRQF_VALID);
}
- /* change RTC IRQ's set wake method */
-
- s3c2412_irq_rtc_chip = s3c_irq_chip;
- s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake;
-
- irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
-
return 0;
}
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index 4c4bc1c..d75f95e 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -29,6 +29,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/wakeup-mask.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
@@ -51,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg)
return 1; /* Aborting suspend */
}
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask wake_irqs[] = {
+ { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
+};
+
static void s3c2412_pm_prepare(void)
{
+ samsung_sync_wakemask(S3C2412_PWRCFG,
+ wake_irqs, ARRAY_SIZE(wake_irqs));
}
static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 08/10] ARM: S3C24XX: move s3c2412 irq init to common code
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:18 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:18 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Base for further cleanups
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c2412.c | 192 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 154 ++++++++++++++++++++++++++++
3 files changed, 155 insertions(+), 193 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2412.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 9041260..be6e4d0 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
deleted file mode 100644
index e6fd954..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/irq.h>
-#include <plat/pm.h>
-
-#include "s3c2412-power.h"
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
-
-/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
- * having them turn up in both the INT* and the EINT* registers. Whilst
- * both show the status, they both now need to be acked when the IRQs
- * go off.
-*/
-
-static void
-s3c2412_irq_mask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask | bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-}
-
-static inline void
-s3c2412_irq_ack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c2412_irq_maskack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static void
-s3c2412_irq_unmask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask & ~bitval, S3C2410_INTMSK);
-}
-
-static struct irq_chip s3c2412_irq_eint0t4 = {
- .irq_ack = s3c2412_irq_ack,
- .irq_mask = s3c2412_irq_mask,
- .irq_unmask = s3c2412_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext_type,
-};
-
-#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
-
-/* CF and SDI sub interrupts */
-
-static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
-
- if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- generic_handle_irq(IRQ_S3C2412_SDI);
-
- if (subsrc & INTBIT(IRQ_S3C2412_CF))
- generic_handle_irq(IRQ_S3C2412_CF);
-}
-
-#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
-#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
-
-static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static struct irq_chip s3c2412_irq_cfsdi = {
- .name = "s3c2412-cfsdi",
- .irq_ack = s3c2412_irq_cfsdi_ack,
- .irq_mask = s3c2412_irq_cfsdi_mask,
- .irq_unmask = s3c2412_irq_cfsdi_unmask,
-};
-
-static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* add demux support for CF/SDI */
-
- irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
-
- for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2412_irq_interface = {
- .name = "s3c2412_irq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_irq_add,
-};
-
-static int s3c2412_irq_init(void)
-{
- return subsys_interface_register(&s3c2412_irq_interface);
-}
-
-arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 26b17a1..905cb21 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -628,6 +628,160 @@ void __init s3c24xx_init_irq(void)
s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
}
+#ifdef CONFIG_CPU_S3C2412
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
+
+/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
+ * having them turn up in both the INT* and the EINT* registers. Whilst
+ * both show the status, they both now need to be acked when the IRQs
+ * go off.
+*/
+
+static void
+s3c2412_irq_mask(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask | bitval, S3C2410_INTMSK);
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask | bitval, S3C2412_EINTMASK);
+}
+
+static inline void
+s3c2412_irq_ack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+
+ __raw_writel(bitval, S3C2412_EINTPEND);
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c2412_irq_maskack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask|bitval, S3C2410_INTMSK);
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask | bitval, S3C2412_EINTMASK);
+
+ __raw_writel(bitval, S3C2412_EINTPEND);
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static void
+s3c2412_irq_unmask(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask & ~bitval, S3C2410_INTMSK);
+}
+
+static struct irq_chip s3c2412_irq_eint0t4 = {
+ .irq_ack = s3c2412_irq_ack,
+ .irq_mask = s3c2412_irq_mask,
+ .irq_unmask = s3c2412_irq_unmask,
+ .irq_set_wake = s3c_irq_wake,
+ .irq_set_type = s3c_irqext_type,
+};
+
+#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
+
+/* CF and SDI sub interrupts */
+
+static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+
+ if (subsrc & INTBIT(IRQ_S3C2412_SDI))
+ generic_handle_irq(IRQ_S3C2412_SDI);
+
+ if (subsrc & INTBIT(IRQ_S3C2412_CF))
+ generic_handle_irq(IRQ_S3C2412_CF);
+}
+
+#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
+#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
+
+static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
+}
+
+static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
+}
+
+static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
+}
+
+static struct irq_chip s3c2412_irq_cfsdi = {
+ .name = "s3c2412-cfsdi",
+ .irq_ack = s3c2412_irq_cfsdi_ack,
+ .irq_mask = s3c2412_irq_cfsdi_mask,
+ .irq_unmask = s3c2412_irq_cfsdi_unmask,
+};
+
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
+ handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ /* add demux support for CF/SDI */
+
+ irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
+
+ for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2412_irq_interface = {
+ .name = "s3c2412_irq",
+ .subsys = &s3c2412_subsys,
+ .add_dev = s3c2412_irq_add,
+};
+
+static int s3c2412_irq_init(void)
+{
+ return subsys_interface_register(&s3c2412_irq_interface);
+}
+
+arch_initcall(s3c2412_irq_init);
+#endif
+
#ifdef CONFIG_CPU_S3C2416
static struct s3c_irq_data init_s3c2416base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 08/10] ARM: S3C24XX: move s3c2412 irq init to common code
@ 2013-02-09 17:18 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:18 UTC (permalink / raw)
To: linux-arm-kernel
Base for further cleanups
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/irq-s3c2412.c | 192 -----------------------------------
arch/arm/mach-s3c24xx/irq.c | 154 ++++++++++++++++++++++++++++
3 files changed, 155 insertions(+), 193 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2412.c
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 9041260..be6e4d0 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
deleted file mode 100644
index e6fd954..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/irq.h>
-#include <plat/pm.h>
-
-#include "s3c2412-power.h"
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
-
-/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
- * having them turn up in both the INT* and the EINT* registers. Whilst
- * both show the status, they both now need to be acked when the IRQs
- * go off.
-*/
-
-static void
-s3c2412_irq_mask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask | bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-}
-
-static inline void
-s3c2412_irq_ack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c2412_irq_maskack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static void
-s3c2412_irq_unmask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask & ~bitval, S3C2410_INTMSK);
-}
-
-static struct irq_chip s3c2412_irq_eint0t4 = {
- .irq_ack = s3c2412_irq_ack,
- .irq_mask = s3c2412_irq_mask,
- .irq_unmask = s3c2412_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext_type,
-};
-
-#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
-
-/* CF and SDI sub interrupts */
-
-static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
-
- if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- generic_handle_irq(IRQ_S3C2412_SDI);
-
- if (subsrc & INTBIT(IRQ_S3C2412_CF))
- generic_handle_irq(IRQ_S3C2412_CF);
-}
-
-#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
-#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
-
-static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static struct irq_chip s3c2412_irq_cfsdi = {
- .name = "s3c2412-cfsdi",
- .irq_ack = s3c2412_irq_cfsdi_ack,
- .irq_mask = s3c2412_irq_cfsdi_mask,
- .irq_unmask = s3c2412_irq_cfsdi_unmask,
-};
-
-static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* add demux support for CF/SDI */
-
- irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
-
- for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2412_irq_interface = {
- .name = "s3c2412_irq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_irq_add,
-};
-
-static int s3c2412_irq_init(void)
-{
- return subsys_interface_register(&s3c2412_irq_interface);
-}
-
-arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 26b17a1..905cb21 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -628,6 +628,160 @@ void __init s3c24xx_init_irq(void)
s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
}
+#ifdef CONFIG_CPU_S3C2412
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
+
+/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
+ * having them turn up in both the INT* and the EINT* registers. Whilst
+ * both show the status, they both now need to be acked when the IRQs
+ * go off.
+*/
+
+static void
+s3c2412_irq_mask(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask | bitval, S3C2410_INTMSK);
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask | bitval, S3C2412_EINTMASK);
+}
+
+static inline void
+s3c2412_irq_ack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+
+ __raw_writel(bitval, S3C2412_EINTPEND);
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c2412_irq_maskack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask|bitval, S3C2410_INTMSK);
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask | bitval, S3C2412_EINTMASK);
+
+ __raw_writel(bitval, S3C2412_EINTPEND);
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static void
+s3c2412_irq_unmask(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask & ~bitval, S3C2410_INTMSK);
+}
+
+static struct irq_chip s3c2412_irq_eint0t4 = {
+ .irq_ack = s3c2412_irq_ack,
+ .irq_mask = s3c2412_irq_mask,
+ .irq_unmask = s3c2412_irq_unmask,
+ .irq_set_wake = s3c_irq_wake,
+ .irq_set_type = s3c_irqext_type,
+};
+
+#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
+
+/* CF and SDI sub interrupts */
+
+static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+
+ if (subsrc & INTBIT(IRQ_S3C2412_SDI))
+ generic_handle_irq(IRQ_S3C2412_SDI);
+
+ if (subsrc & INTBIT(IRQ_S3C2412_CF))
+ generic_handle_irq(IRQ_S3C2412_CF);
+}
+
+#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
+#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
+
+static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
+}
+
+static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
+}
+
+static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
+}
+
+static struct irq_chip s3c2412_irq_cfsdi = {
+ .name = "s3c2412-cfsdi",
+ .irq_ack = s3c2412_irq_cfsdi_ack,
+ .irq_mask = s3c2412_irq_cfsdi_mask,
+ .irq_unmask = s3c2412_irq_cfsdi_unmask,
+};
+
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
+{
+ unsigned int irqno;
+
+ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
+ handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ /* add demux support for CF/SDI */
+
+ irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
+
+ for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2412_irq_interface = {
+ .name = "s3c2412_irq",
+ .subsys = &s3c2412_subsys,
+ .add_dev = s3c2412_irq_add,
+};
+
+static int s3c2412_irq_init(void)
+{
+ return subsys_interface_register(&s3c2412_irq_interface);
+}
+
+arch_initcall(s3c2412_irq_init);
+#endif
+
#ifdef CONFIG_CPU_S3C2416
static struct s3c_irq_data init_s3c2416base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 09/10] ARM: S3C24XX: modify s3c2412 irq init to initialize all irqs
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:19 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:19 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Combines the two independent init steps for the irqs into one.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/common.h | 1 +
arch/arm/mach-s3c24xx/irq.c | 19 +++----------------
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-smdk2413.c | 6 +++---
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
5 files changed, 9 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 362a8cd..abefeb3 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -36,6 +36,7 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2412_init_clocks(int xtal);
extern int s3c2412_baseclk_add(void);
extern void s3c2412_restart(char mode, const char *cmd);
+extern void s3c2412_init_irq(void);
#else
#define s3c2412_init_clocks NULL
#define s3c2412_init_uarts NULL
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 905cb21..bf1e964 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -745,10 +745,12 @@ static struct irq_chip s3c2412_irq_cfsdi = {
.irq_unmask = s3c2412_irq_cfsdi_unmask,
};
-static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
+void s3c2412_init_irq(void)
{
unsigned int irqno;
+ s3c24xx_init_irq();
+
for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
handle_edge_irq);
@@ -764,22 +766,7 @@ static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- return 0;
}
-
-static struct subsys_interface s3c2412_irq_interface = {
- .name = "s3c2412_irq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_irq_add,
-};
-
-static int s3c2412_irq_init(void)
-{
- return subsys_interface_register(&s3c2412_irq_interface);
-}
-
-arch_initcall(s3c2412_irq_init);
#endif
#ifdef CONFIG_CPU_S3C2416
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 0c8c733..0d06c53 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -660,7 +660,7 @@ MACHINE_START(JIVE, "JIVE")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
.init_time = samsung_timer_init,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index d5ef86d..9b3f814 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -131,7 +131,7 @@ MACHINE_START(S3C2413, "S3C2413")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = samsung_timer_init,
@@ -143,7 +143,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = samsung_timer_init,
@@ -155,7 +155,7 @@ MACHINE_START(SMDK2413, "SMDK2413")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = samsung_timer_init,
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 622a1ed..b665884 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -158,7 +158,7 @@ MACHINE_START(VSTMS, "VSTMS")
.atag_offset = 0x100,
.fixup = vstms_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
.init_time = samsung_timer_init,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 09/10] ARM: S3C24XX: modify s3c2412 irq init to initialize all irqs
@ 2013-02-09 17:19 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:19 UTC (permalink / raw)
To: linux-arm-kernel
Combines the two independent init steps for the irqs into one.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/common.h | 1 +
arch/arm/mach-s3c24xx/irq.c | 19 +++----------------
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-smdk2413.c | 6 +++---
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
5 files changed, 9 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 362a8cd..abefeb3 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -36,6 +36,7 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2412_init_clocks(int xtal);
extern int s3c2412_baseclk_add(void);
extern void s3c2412_restart(char mode, const char *cmd);
+extern void s3c2412_init_irq(void);
#else
#define s3c2412_init_clocks NULL
#define s3c2412_init_uarts NULL
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 905cb21..bf1e964 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -745,10 +745,12 @@ static struct irq_chip s3c2412_irq_cfsdi = {
.irq_unmask = s3c2412_irq_cfsdi_unmask,
};
-static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
+void s3c2412_init_irq(void)
{
unsigned int irqno;
+ s3c24xx_init_irq();
+
for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
handle_edge_irq);
@@ -764,22 +766,7 @@ static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- return 0;
}
-
-static struct subsys_interface s3c2412_irq_interface = {
- .name = "s3c2412_irq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_irq_add,
-};
-
-static int s3c2412_irq_init(void)
-{
- return subsys_interface_register(&s3c2412_irq_interface);
-}
-
-arch_initcall(s3c2412_irq_init);
#endif
#ifdef CONFIG_CPU_S3C2416
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 0c8c733..0d06c53 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -660,7 +660,7 @@ MACHINE_START(JIVE, "JIVE")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
.init_time = samsung_timer_init,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index d5ef86d..9b3f814 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -131,7 +131,7 @@ MACHINE_START(S3C2413, "S3C2413")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = samsung_timer_init,
@@ -143,7 +143,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = samsung_timer_init,
@@ -155,7 +155,7 @@ MACHINE_START(SMDK2413, "SMDK2413")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.init_time = samsung_timer_init,
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 622a1ed..b665884 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -158,7 +158,7 @@ MACHINE_START(VSTMS, "VSTMS")
.atag_offset = 0x100,
.fixup = vstms_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
.init_time = samsung_timer_init,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 10/10] ARM: S3C24XX: transform s3c2412 irqs into new structure
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-09 17:19 ` Heiko Stübner
-1 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:19 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc
Contains only the new mapping structure. The special handling
of the eint0 to eint3 interrupts still needs to be solved.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 122 +++++++++++++++++++++++--------------------
1 files changed, 66 insertions(+), 56 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index bf1e964..1cb1962 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -629,9 +629,58 @@ void __init s3c24xx_init_irq(void)
}
#ifdef CONFIG_CPU_S3C2412
+static struct s3c_irq_data init_s3c2412base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
+static struct s3c_irq_data init_s3c2412subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
+};
/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
* having them turn up in both the INT* and the EINT* registers. Whilst
@@ -700,72 +749,33 @@ static struct irq_chip s3c2412_irq_eint0t4 = {
.irq_set_type = s3c_irqext_type,
};
-#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
-
-/* CF and SDI sub interrupts */
-
-static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
-
- if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- generic_handle_irq(IRQ_S3C2412_SDI);
-
- if (subsrc & INTBIT(IRQ_S3C2412_CF))
- generic_handle_irq(IRQ_S3C2412_CF);
-}
-
-#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
-#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
-
-static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
+void s3c2412_init_irq(void)
{
- s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
+ struct s3c_irq_intc *main_intc;
+ unsigned int irqno;
-static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
-}
+ pr_info("S3C2412: IRQ Support\n");
-static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
-static struct irq_chip s3c2412_irq_cfsdi = {
- .name = "s3c2412-cfsdi",
- .irq_ack = s3c2412_irq_cfsdi_ack,
- .irq_mask = s3c2412_irq_cfsdi_mask,
- .irq_unmask = s3c2412_irq_cfsdi_unmask,
-};
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
-void s3c2412_init_irq(void)
-{
- unsigned int irqno;
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018);
- s3c24xx_init_irq();
+ /* special handling for eints 0 to 3 */
for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
handle_edge_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- /* add demux support for CF/SDI */
-
- irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
-
- for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 10/10] ARM: S3C24XX: transform s3c2412 irqs into new structure
@ 2013-02-09 17:19 ` Heiko Stübner
0 siblings, 0 replies; 24+ messages in thread
From: Heiko Stübner @ 2013-02-09 17:19 UTC (permalink / raw)
To: linux-arm-kernel
Contains only the new mapping structure. The special handling
of the eint0 to eint3 interrupts still needs to be solved.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/irq.c | 122 +++++++++++++++++++++++--------------------
1 files changed, 66 insertions(+), 56 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index bf1e964..1cb1962 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -629,9 +629,58 @@ void __init s3c24xx_init_irq(void)
}
#ifdef CONFIG_CPU_S3C2412
+static struct s3c_irq_data init_s3c2412base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
+static struct s3c_irq_data init_s3c2412subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
+};
/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
* having them turn up in both the INT* and the EINT* registers. Whilst
@@ -700,72 +749,33 @@ static struct irq_chip s3c2412_irq_eint0t4 = {
.irq_set_type = s3c_irqext_type,
};
-#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
-
-/* CF and SDI sub interrupts */
-
-static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
-
- if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- generic_handle_irq(IRQ_S3C2412_SDI);
-
- if (subsrc & INTBIT(IRQ_S3C2412_CF))
- generic_handle_irq(IRQ_S3C2412_CF);
-}
-
-#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
-#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
-
-static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
+void s3c2412_init_irq(void)
{
- s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
+ struct s3c_irq_intc *main_intc;
+ unsigned int irqno;
-static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
-}
+ pr_info("S3C2412: IRQ Support\n");
-static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
-static struct irq_chip s3c2412_irq_cfsdi = {
- .name = "s3c2412-cfsdi",
- .irq_ack = s3c2412_irq_cfsdi_ack,
- .irq_mask = s3c2412_irq_cfsdi_mask,
- .irq_unmask = s3c2412_irq_cfsdi_unmask,
-};
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
-void s3c2412_init_irq(void)
-{
- unsigned int irqno;
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018);
- s3c24xx_init_irq();
+ /* special handling for eints 0 to 3 */
for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
handle_edge_irq);
set_irq_flags(irqno, IRQF_VALID);
}
-
- /* add demux support for CF/SDI */
-
- irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
-
- for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
}
#endif
--
1.7.2.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* RE: [PATCH v2 00/10] ARM: S3C24XX: irq rework for S3C2412, S3C2440 and S3C2442
2013-02-09 17:11 ` Heiko Stübner
@ 2013-02-12 19:13 ` Kukjin Kim
-1 siblings, 0 replies; 24+ messages in thread
From: Kukjin Kim @ 2013-02-12 19:13 UTC (permalink / raw)
To: 'Heiko Stübner'; +Cc: linux-arm-kernel, linux-samsung-soc
Heiko Stübner wrote:
>
> This series finishes the irq rework by moving the irqs for s3c2412, s3c2440
> and s3c2442 into the new structure.
>
> Now the only open point is the different handling of the eint0 to eint3
> interrupts on the s3c2412. On this SoC these interrupts are represented
> in both the main register and the eint register and also need to be handled
> in both.
>
> As this should be handlable via the new structure, I'm still investigating
> the right way to do it. Therefore the override of the eint0 to eint3
> interrupts will still remain for a bit.
>
> As I lack the relevant hardware, this series is compile tested only, but as
> the used mechanisms are the same as with the s3c2416, there shouldn't be
> any complications.
>
> This series applies on top of the moved s3c24XX.h headers into the
> common.h
> file in mach-s3c24xx.
>
> changes since v1:
> - included the changes for the s3c2412
>
> Heiko Stuebner (10):
> ARM: S3C24XX: move s3c244x irq init to common irq code
> ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
> ARM: S3C24XX: move s3c2440 irqs to common irq code
> ARM: S3C24XX: integrate s3c2440 irqs into common init
> ARM: S3C24XX: transform s3c2442 irqs into new structure
> ARM: S3C24XX: transform s3c2440 irqs into new structure
> ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm
> ARM: S3C24XX: move s3c2412 irq init to common code
> ARM: S3C24XX: modify s3c2412 irq init to initialize all irqs
> ARM: S3C24XX: transform s3c2412 irqs into new structure
>
> arch/arm/mach-s3c24xx/Kconfig | 1 +
> arch/arm/mach-s3c24xx/Makefile | 6 +-
> arch/arm/mach-s3c24xx/common.h | 3 +
> arch/arm/mach-s3c24xx/irq-s3c2412.c | 215 -----------------------
> arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 --------------
> arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 ---------------
> arch/arm/mach-s3c24xx/irq.c | 299
> ++++++++++++++++++++++++++++++++
> arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
> arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
> arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
> arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
> arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
> arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
> arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
> arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
> arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +-
> arch/arm/mach-s3c24xx/mach-smdk2413.c | 6 +-
> arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
> arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
> arch/arm/mach-s3c24xx/pm-s3c2412.c | 8 +
> 20 files changed, 328 insertions(+), 507 deletions(-)
> delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2412.c
> delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
> delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
>
> --
> 1.7.2.3
Applied, this whole series and integration 2412 eint handling.
Thanks for your time and support.
- Kukjin
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v2 00/10] ARM: S3C24XX: irq rework for S3C2412, S3C2440 and S3C2442
@ 2013-02-12 19:13 ` Kukjin Kim
0 siblings, 0 replies; 24+ messages in thread
From: Kukjin Kim @ 2013-02-12 19:13 UTC (permalink / raw)
To: linux-arm-kernel
Heiko St?bner wrote:
>
> This series finishes the irq rework by moving the irqs for s3c2412, s3c2440
> and s3c2442 into the new structure.
>
> Now the only open point is the different handling of the eint0 to eint3
> interrupts on the s3c2412. On this SoC these interrupts are represented
> in both the main register and the eint register and also need to be handled
> in both.
>
> As this should be handlable via the new structure, I'm still investigating
> the right way to do it. Therefore the override of the eint0 to eint3
> interrupts will still remain for a bit.
>
> As I lack the relevant hardware, this series is compile tested only, but as
> the used mechanisms are the same as with the s3c2416, there shouldn't be
> any complications.
>
> This series applies on top of the moved s3c24XX.h headers into the
> common.h
> file in mach-s3c24xx.
>
> changes since v1:
> - included the changes for the s3c2412
>
> Heiko Stuebner (10):
> ARM: S3C24XX: move s3c244x irq init to common irq code
> ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442
> ARM: S3C24XX: move s3c2440 irqs to common irq code
> ARM: S3C24XX: integrate s3c2440 irqs into common init
> ARM: S3C24XX: transform s3c2442 irqs into new structure
> ARM: S3C24XX: transform s3c2440 irqs into new structure
> ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm
> ARM: S3C24XX: move s3c2412 irq init to common code
> ARM: S3C24XX: modify s3c2412 irq init to initialize all irqs
> ARM: S3C24XX: transform s3c2412 irqs into new structure
>
> arch/arm/mach-s3c24xx/Kconfig | 1 +
> arch/arm/mach-s3c24xx/Makefile | 6 +-
> arch/arm/mach-s3c24xx/common.h | 3 +
> arch/arm/mach-s3c24xx/irq-s3c2412.c | 215 -----------------------
> arch/arm/mach-s3c24xx/irq-s3c2440.c | 128 --------------
> arch/arm/mach-s3c24xx/irq-s3c244x.c | 142 ---------------
> arch/arm/mach-s3c24xx/irq.c | 299
> ++++++++++++++++++++++++++++++++
> arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
> arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
> arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
> arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
> arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
> arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +-
> arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
> arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
> arch/arm/mach-s3c24xx/mach-rx3715.c | 7 +-
> arch/arm/mach-s3c24xx/mach-smdk2413.c | 6 +-
> arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +-
> arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
> arch/arm/mach-s3c24xx/pm-s3c2412.c | 8 +
> 20 files changed, 328 insertions(+), 507 deletions(-)
> delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2412.c
> delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c2440.c
> delete mode 100644 arch/arm/mach-s3c24xx/irq-s3c244x.c
>
> --
> 1.7.2.3
Applied, this whole series and integration 2412 eint handling.
Thanks for your time and support.
- Kukjin
^ permalink raw reply [flat|nested] 24+ messages in thread