All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: linux-omap@vger.kernel.org, khilman@deeprootsystems.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
Date: Fri, 1 Mar 2013 15:53:16 -0600	[thread overview]
Message-ID: <20130301215315.GA23856@kahuna> (raw)
In-Reply-To: <1362139864-9233-10-git-send-email-santosh.shilimkar@ti.com>

On 17:40-20130301, Santosh Shilimkar wrote:
> While waking up CPU from off state using clock domain force wakeup, restore
> the CPU power state to ON state before putting CPU clock domain under
> hardware control. Otherwise CPU wakeup might fail. The change is recommended\
the trailing \ was unintentional I suppose.
> for all OMAP4+ devices though the PRCM weakness was observed on OMAP5
> devices first.
> 
> So update the code accordingly.
> 
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
>  arch/arm/mach-omap2/cpuidle44xx.c |    1 +
>  arch/arm/mach-omap2/omap-smp.c    |   12 ++++++++++--
>  2 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
> index 944e64a..9de47a7 100644
> --- a/arch/arm/mach-omap2/cpuidle44xx.c
> +++ b/arch/arm/mach-omap2/cpuidle44xx.c
> @@ -131,6 +131,7 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
>  	/* Wakeup CPU1 only if it is not offlined */
>  	if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
>  		clkdm_wakeup(cpu_clkdm[1]);
> +		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
>  		clkdm_allow_idle(cpu_clkdm[1]);
>  	}
>  
> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
> index 9711ecd..ba63b14 100644
> --- a/arch/arm/mach-omap2/omap-smp.c
> +++ b/arch/arm/mach-omap2/omap-smp.c
> @@ -83,6 +83,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  {
>  	static struct clockdomain *cpu1_clkdm;
>  	static bool booted;
> +	static struct powerdomain *cpu1_pwrdm;
>  	void __iomem *base = omap_get_wakeupgen_base();
>  
>  	/*
> @@ -102,8 +103,10 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  	else
>  		__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
>  
> -	if (!cpu1_clkdm)
> +	if (!cpu1_clkdm && !cpu1_pwrdm) {
>  		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
> +		cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm");
> +	}
>  
>  	/*
>  	 * The SGI(Software Generated Interrupts) are not wakeup capable
> @@ -116,7 +119,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  	 * Section :
>  	 *	4.3.4.2 Power States of CPU0 and CPU1
>  	 */
> -	if (booted) {
> +	if (booted && cpu1_pwrdm && cpu1_clkdm) {
>  		/*
>  		 * GIC distributor control register has changed between
>  		 * CortexA9 r1pX and r2pX. The Control Register secure
> @@ -137,7 +140,12 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  			gic_dist_disable();
>  		}
>  
> +		/*
> +		 * Ensure that CPU power state is set to ON to avoid CPU
> +		 * powerdomain transition on wfi
> +		 */
>  		clkdm_wakeup(cpu1_clkdm);
> +		omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
>  		clkdm_allow_idle(cpu1_clkdm);
>  
>  		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
Otherwise:
Acked-by: Nishanth Menon <nm@ti.com>
-- 
Regards,
Nishanth Menon

WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
Date: Fri, 1 Mar 2013 15:53:16 -0600	[thread overview]
Message-ID: <20130301215315.GA23856@kahuna> (raw)
In-Reply-To: <1362139864-9233-10-git-send-email-santosh.shilimkar@ti.com>

On 17:40-20130301, Santosh Shilimkar wrote:
> While waking up CPU from off state using clock domain force wakeup, restore
> the CPU power state to ON state before putting CPU clock domain under
> hardware control. Otherwise CPU wakeup might fail. The change is recommended\
the trailing \ was unintentional I suppose.
> for all OMAP4+ devices though the PRCM weakness was observed on OMAP5
> devices first.
> 
> So update the code accordingly.
> 
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
>  arch/arm/mach-omap2/cpuidle44xx.c |    1 +
>  arch/arm/mach-omap2/omap-smp.c    |   12 ++++++++++--
>  2 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
> index 944e64a..9de47a7 100644
> --- a/arch/arm/mach-omap2/cpuidle44xx.c
> +++ b/arch/arm/mach-omap2/cpuidle44xx.c
> @@ -131,6 +131,7 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
>  	/* Wakeup CPU1 only if it is not offlined */
>  	if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
>  		clkdm_wakeup(cpu_clkdm[1]);
> +		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
>  		clkdm_allow_idle(cpu_clkdm[1]);
>  	}
>  
> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
> index 9711ecd..ba63b14 100644
> --- a/arch/arm/mach-omap2/omap-smp.c
> +++ b/arch/arm/mach-omap2/omap-smp.c
> @@ -83,6 +83,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  {
>  	static struct clockdomain *cpu1_clkdm;
>  	static bool booted;
> +	static struct powerdomain *cpu1_pwrdm;
>  	void __iomem *base = omap_get_wakeupgen_base();
>  
>  	/*
> @@ -102,8 +103,10 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  	else
>  		__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
>  
> -	if (!cpu1_clkdm)
> +	if (!cpu1_clkdm && !cpu1_pwrdm) {
>  		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
> +		cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm");
> +	}
>  
>  	/*
>  	 * The SGI(Software Generated Interrupts) are not wakeup capable
> @@ -116,7 +119,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  	 * Section :
>  	 *	4.3.4.2 Power States of CPU0 and CPU1
>  	 */
> -	if (booted) {
> +	if (booted && cpu1_pwrdm && cpu1_clkdm) {
>  		/*
>  		 * GIC distributor control register has changed between
>  		 * CortexA9 r1pX and r2pX. The Control Register secure
> @@ -137,7 +140,12 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
>  			gic_dist_disable();
>  		}
>  
> +		/*
> +		 * Ensure that CPU power state is set to ON to avoid CPU
> +		 * powerdomain transition on wfi
> +		 */
>  		clkdm_wakeup(cpu1_clkdm);
> +		omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
>  		clkdm_allow_idle(cpu1_clkdm);
>  
>  		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
Otherwise:
Acked-by: Nishanth Menon <nm@ti.com>
-- 
Regards,
Nishanth Menon

  reply	other threads:[~2013-03-01 21:53 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-01 12:10 [PATCH 00/15] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support Santosh Shilimkar
2013-03-01 12:10 ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 01/15] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 13:50   ` Nishanth Menon
2013-03-01 13:50     ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 02/15] ARM: OMAP5: PM: Update CPU context register offset Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 17:34   ` Nishanth Menon
2013-03-01 17:34     ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 03/15] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5 Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 17:43   ` Nishanth Menon
2013-03-01 17:43     ` Nishanth Menon
2013-03-02  5:43     ` Santosh Shilimkar
2013-03-02  5:43       ` Santosh Shilimkar
2013-03-04 18:21       ` Nishanth Menon
2013-03-04 18:21         ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 04/15] ARM: OMAP5: PM: Set MPUSS-EMIF clock-domain static dependency Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 19:37   ` Nishanth Menon
2013-03-01 19:37     ` Nishanth Menon
2013-03-02  5:47     ` Santosh Shilimkar
2013-03-02  5:47       ` Santosh Shilimkar
2013-03-04 18:29       ` Nishanth Menon
2013-03-04 18:29         ` Nishanth Menon
2013-03-10 18:07         ` Santosh Shilimkar
2013-03-10 18:07           ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 06/15] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 19:42   ` Nishanth Menon
2013-03-01 19:42     ` Nishanth Menon
2013-03-02  5:52     ` Santosh Shilimkar
2013-03-02  5:52       ` Santosh Shilimkar
2013-03-04 18:33       ` Nishanth Menon
2013-03-04 18:33         ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 20:12   ` Nishanth Menon
2013-03-01 20:12     ` Nishanth Menon
2013-03-02  6:00     ` Santosh Shilimkar
2013-03-02  6:00       ` Santosh Shilimkar
2013-03-04 18:35       ` Nishanth Menon
2013-03-04 18:35         ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 08/15] ARM: OMAP5: PM: Add CPU power off mode support Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 21:36   ` Nishanth Menon
2013-03-01 21:36     ` Nishanth Menon
2013-03-02  6:14     ` Santosh Shilimkar
2013-03-02  6:14       ` Santosh Shilimkar
2013-03-04 18:38       ` Nishanth Menon
2013-03-04 18:38         ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 21:53   ` Nishanth Menon [this message]
2013-03-01 21:53     ` Nishanth Menon
2013-03-02  6:16     ` Santosh Shilimkar
2013-03-02  6:16       ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 10/15] ARM: OMAP5: PM: Add MPU Open Switch Retention support Santosh Shilimkar
2013-03-01 12:10   ` Santosh Shilimkar
2013-03-01 22:05   ` Nishanth Menon
2013-03-01 22:05     ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support Santosh Shilimkar
2013-03-01 12:11   ` Santosh Shilimkar
2013-03-01 23:43   ` Nishanth Menon
2013-03-01 23:43     ` Nishanth Menon
2013-03-02  6:24     ` Santosh Shilimkar
2013-03-02  6:24       ` Santosh Shilimkar
2013-03-04 18:41       ` Nishanth Menon
2013-03-04 18:41         ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 12/15] ARM: OMAP4+: CPUidle: Cleanup idle driver for OMAP5 support Santosh Shilimkar
2013-03-01 12:11   ` Santosh Shilimkar
2013-03-01 23:56   ` Nishanth Menon
2013-03-01 23:56     ` Nishanth Menon
2013-03-02  6:25     ` Santosh Shilimkar
2013-03-02  6:25       ` Santosh Shilimkar
2013-03-01 12:11 ` [PATCH 13/15] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state() Santosh Shilimkar
2013-03-01 12:11   ` Santosh Shilimkar
2013-03-02  0:03   ` Nishanth Menon
2013-03-02  0:03     ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 14/15] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support Santosh Shilimkar
2013-03-01 12:11   ` Santosh Shilimkar
2013-03-02  0:25   ` Nishanth Menon
2013-03-02  0:25     ` Nishanth Menon
2013-03-02  6:47     ` Santosh Shilimkar
2013-03-02  6:47       ` Santosh Shilimkar
2013-03-04 18:48       ` Nishanth Menon
2013-03-04 18:48         ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset Santosh Shilimkar
2013-03-01 12:11   ` Santosh Shilimkar
2013-03-01 13:04   ` Nishanth Menon
2013-03-01 13:04     ` Nishanth Menon
2013-03-01 13:09     ` Santosh Shilimkar
2013-03-01 13:09       ` Santosh Shilimkar
2013-03-01 13:13       ` Nishanth Menon
2013-03-01 13:13         ` Nishanth Menon
2013-03-01 13:16         ` Santosh Shilimkar
2013-03-01 13:16           ` Santosh Shilimkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130301215315.GA23856@kahuna \
    --to=nm@ti.com \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=santosh.shilimkar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.