All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Mackerras <paulus@samba.org>
To: Alexander Graf <agraf@suse.de>, kvm@vger.kernel.org
Cc: kvm-ppc@vger.kernel.org, Scott Wood <scottwood@freescale.com>
Subject: [PATCH] KVM: Add KVM_CAP_IRQ_ARCH capability
Date: Thu, 14 Mar 2013 01:20:44 +0000	[thread overview]
Message-ID: <20130314012044.GA12273@drongo> (raw)

Setting this capability on a vcpu connects that vcpu to an interrupt
controller device.  The args[0] field of the argument kvm_enable_cap
struct specifies the overall architecture of the interrupt
controller.  The args[1] field specifies the CPU number for the vcpu
from the interrupt controller's point of view.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/kvm_host.h |    3 +++
 arch/powerpc/kvm/powerpc.c          |   29 +++++++++++++++++++++++++++++
 include/uapi/linux/kvm.h            |    1 +
 3 files changed, 33 insertions(+)

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index f4ba881..dd167e4 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -373,6 +373,9 @@ struct kvmppc_booke_debug_reg {
 struct kvm_vcpu_arch {
 	ulong host_stack;
 	u32 host_pid;
+
+	u32 intr_ctrler;
+
 #ifdef CONFIG_PPC_BOOK3S
 	struct kvmppc_slb slb[64];
 	int slb_max;		/* 1 + index of last valid entry in slb[] */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 934413c..891603e 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -459,6 +459,12 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 	hrtimer_cancel(&vcpu->arch.dec_timer);
 	tasklet_kill(&vcpu->arch.tasklet);
 
+	/* Release any per-vcpu irq controller state */
+	switch (vcpu->arch.intr_ctrler) {
+	default:
+		break;
+	}
+
 	kvmppc_remove_vcpu_debugfs(vcpu);
 	kvmppc_core_vcpu_free(vcpu);
 }
@@ -791,6 +797,29 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 		break;
 	}
 #endif
+	case KVM_CAP_IRQ_ARCH:
+		r = -EBUSY;
+		mutex_lock(&vcpu->kvm->lock);
+		/* disallow changing once set */
+		if (!vcpu->arch.intr_ctrler) {
+			r = 0;
+			switch (cap->args[0]) {
+			case 0:		/* no interrupt controller */
+				break;
+			default:
+				r = -EINVAL;
+			}
+			if (!r) {
+				/*
+				 * Make sure any state set up by the interrupt
+				 * controller init routine is seen before this.
+				 */
+				smp_wmb();
+				vcpu->arch.intr_ctrler = cap->args[0];
+			}
+		}
+		mutex_unlock(&vcpu->kvm->lock);
+		break;
 	default:
 		r = -EINVAL;
 		break;
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 1f348e0..d875d37 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -663,6 +663,7 @@ struct kvm_ppc_smmu_info {
 #define KVM_CAP_S390_CSS_SUPPORT 85
 #define KVM_CAP_PPC_EPR 86
 #define KVM_CAP_DEVICE_CTRL 87
+#define KVM_CAP_IRQ_ARCH 88
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
-- 
1.7.10.4


WARNING: multiple messages have this Message-ID (diff)
From: Paul Mackerras <paulus@samba.org>
To: Alexander Graf <agraf@suse.de>, kvm@vger.kernel.org
Cc: kvm-ppc@vger.kernel.org, Scott Wood <scottwood@freescale.com>
Subject: [PATCH] KVM: Add KVM_CAP_IRQ_ARCH capability
Date: Thu, 14 Mar 2013 12:20:44 +1100	[thread overview]
Message-ID: <20130314012044.GA12273@drongo> (raw)

Setting this capability on a vcpu connects that vcpu to an interrupt
controller device.  The args[0] field of the argument kvm_enable_cap
struct specifies the overall architecture of the interrupt
controller.  The args[1] field specifies the CPU number for the vcpu
from the interrupt controller's point of view.

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/kvm_host.h |    3 +++
 arch/powerpc/kvm/powerpc.c          |   29 +++++++++++++++++++++++++++++
 include/uapi/linux/kvm.h            |    1 +
 3 files changed, 33 insertions(+)

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index f4ba881..dd167e4 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -373,6 +373,9 @@ struct kvmppc_booke_debug_reg {
 struct kvm_vcpu_arch {
 	ulong host_stack;
 	u32 host_pid;
+
+	u32 intr_ctrler;
+
 #ifdef CONFIG_PPC_BOOK3S
 	struct kvmppc_slb slb[64];
 	int slb_max;		/* 1 + index of last valid entry in slb[] */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 934413c..891603e 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -459,6 +459,12 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 	hrtimer_cancel(&vcpu->arch.dec_timer);
 	tasklet_kill(&vcpu->arch.tasklet);
 
+	/* Release any per-vcpu irq controller state */
+	switch (vcpu->arch.intr_ctrler) {
+	default:
+		break;
+	}
+
 	kvmppc_remove_vcpu_debugfs(vcpu);
 	kvmppc_core_vcpu_free(vcpu);
 }
@@ -791,6 +797,29 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 		break;
 	}
 #endif
+	case KVM_CAP_IRQ_ARCH:
+		r = -EBUSY;
+		mutex_lock(&vcpu->kvm->lock);
+		/* disallow changing once set */
+		if (!vcpu->arch.intr_ctrler) {
+			r = 0;
+			switch (cap->args[0]) {
+			case 0:		/* no interrupt controller */
+				break;
+			default:
+				r = -EINVAL;
+			}
+			if (!r) {
+				/*
+				 * Make sure any state set up by the interrupt
+				 * controller init routine is seen before this.
+				 */
+				smp_wmb();
+				vcpu->arch.intr_ctrler = cap->args[0];
+			}
+		}
+		mutex_unlock(&vcpu->kvm->lock);
+		break;
 	default:
 		r = -EINVAL;
 		break;
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 1f348e0..d875d37 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -663,6 +663,7 @@ struct kvm_ppc_smmu_info {
 #define KVM_CAP_S390_CSS_SUPPORT 85
 #define KVM_CAP_PPC_EPR 86
 #define KVM_CAP_DEVICE_CTRL 87
+#define KVM_CAP_IRQ_ARCH 88
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
-- 
1.7.10.4

             reply	other threads:[~2013-03-14  1:20 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-14  1:20 Paul Mackerras [this message]
2013-03-14  1:20 ` [PATCH] KVM: Add KVM_CAP_IRQ_ARCH capability Paul Mackerras
2013-03-14 18:20 ` Scott Wood
2013-03-14 18:20   ` Scott Wood
2013-03-14 18:33   ` Alexander Graf
2013-03-14 18:33     ` Alexander Graf
2013-03-14 18:35     ` Scott Wood
2013-03-14 18:35       ` Scott Wood
2013-03-14 19:03       ` Alexander Graf
2013-03-14 19:03         ` Alexander Graf
2013-03-14 19:10         ` Scott Wood
2013-03-14 19:10           ` Scott Wood
2013-03-14 21:46           ` Alexander Graf
2013-03-14 21:46             ` Alexander Graf
2013-03-14 22:28         ` Paul Mackerras
2013-03-14 22:28           ` Paul Mackerras
2013-03-14 22:38           ` Scott Wood
2013-03-14 22:38             ` Scott Wood
2013-03-14 22:19   ` Paul Mackerras
2013-03-14 22:19     ` Paul Mackerras
2013-03-14 22:41     ` Scott Wood
2013-03-14 22:41       ` Scott Wood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130314012044.GA12273@drongo \
    --to=paulus@samba.org \
    --cc=agraf@suse.de \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=scottwood@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.