From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/04] ARM: shmobile: r8a7790 SCIF support
Date: Wed, 27 Mar 2013 15:49:44 +0000 [thread overview]
Message-ID: <20130327154944.10876.63305.sendpatchset@w520> (raw)
In-Reply-To: <20130327154925.10876.40575.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Add SCIF serial port support to the r8a7790 SoC by
adding platform devices for SCIFA0 -> SCIFA2 as well
as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF1 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/clock-r8a7790.c | 34 +++++++++++++++++++
arch/arm/mach-shmobile/setup-r8a7790.c | 55 ++++++++++++++++++++++++++++++++
2 files changed, 88 insertions(+), 1 deletion(-)
--- 0012/arch/arm/mach-shmobile/clock-r8a7790.c
+++ work/arch/arm/mach-shmobile/clock-r8a7790.c 2013-03-20 23:18:42.000000000 +0900
@@ -27,19 +27,51 @@
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR7 0xe615014c
+
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
.len = CPG_LEN,
};
+static struct clk p_clk = {
+ .rate = 65000000, /* shortcut for now */
+ .mapping = &cpg_mapping,
+};
+
+static struct clk mp_clk = {
+ .rate = 52000000, /* shortcut for now */
+ .mapping = &cpg_mapping,
+};
+
static struct clk *main_clks[] = {
+ &p_clk,
+ &mp_clk,
};
-enum { MSTP_NR };
+enum { MSTP721, MSTP720,
+ MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+ [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+ [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+ [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+ [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
};
static struct clk_lookup lookups[] = {
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
};
void __init r8a7790_clock_init(void)
--- 0012/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-03-20 23:15:07.000000000 +0900
@@ -22,13 +22,68 @@
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/serial_sci.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
+#define SCIF_COMMON(scif_type, baseaddr, irq) \
+ .type = scif_type, \
+ .mapbase = baseaddr, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
+ .irqs = SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_4, \
+ .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
+}
+
+#define SCIFB_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_4, \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+}
+
+#define SCIF_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIF, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_2, \
+ .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+
+static const struct plat_sci_port scif[] = {
+ SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+ SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+ SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+ SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+ SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+ SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+ SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+ SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+};
+
+static inline void r8a7790_register_scif(int idx)
+{
+ platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+ sizeof(struct plat_sci_port));
+}
+
void __init r8a7790_add_standard_devices(void)
{
+ r8a7790_register_scif(SCIFA0);
+ r8a7790_register_scif(SCIFA1);
+ r8a7790_register_scif(SCIFB0);
+ r8a7790_register_scif(SCIFB1);
+ r8a7790_register_scif(SCIFB2);
+ r8a7790_register_scif(SCIFA2);
+ r8a7790_register_scif(SCIF0);
+ r8a7790_register_scif(SCIF1);
}
#ifdef CONFIG_USE_OF
WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/04] ARM: shmobile: r8a7790 SCIF support
Date: Thu, 28 Mar 2013 00:49:44 +0900 [thread overview]
Message-ID: <20130327154944.10876.63305.sendpatchset@w520> (raw)
In-Reply-To: <20130327154925.10876.40575.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Add SCIF serial port support to the r8a7790 SoC by
adding platform devices for SCIFA0 -> SCIFA2 as well
as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF1 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/clock-r8a7790.c | 34 +++++++++++++++++++
arch/arm/mach-shmobile/setup-r8a7790.c | 55 ++++++++++++++++++++++++++++++++
2 files changed, 88 insertions(+), 1 deletion(-)
--- 0012/arch/arm/mach-shmobile/clock-r8a7790.c
+++ work/arch/arm/mach-shmobile/clock-r8a7790.c 2013-03-20 23:18:42.000000000 +0900
@@ -27,19 +27,51 @@
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR7 0xe615014c
+
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
.len = CPG_LEN,
};
+static struct clk p_clk = {
+ .rate = 65000000, /* shortcut for now */
+ .mapping = &cpg_mapping,
+};
+
+static struct clk mp_clk = {
+ .rate = 52000000, /* shortcut for now */
+ .mapping = &cpg_mapping,
+};
+
static struct clk *main_clks[] = {
+ &p_clk,
+ &mp_clk,
};
-enum { MSTP_NR };
+enum { MSTP721, MSTP720,
+ MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+ [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+ [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+ [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+ [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
};
static struct clk_lookup lookups[] = {
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
};
void __init r8a7790_clock_init(void)
--- 0012/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-03-20 23:15:07.000000000 +0900
@@ -22,13 +22,68 @@
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/serial_sci.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
+#define SCIF_COMMON(scif_type, baseaddr, irq) \
+ .type = scif_type, \
+ .mapbase = baseaddr, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
+ .irqs = SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_4, \
+ .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
+}
+
+#define SCIFB_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_4, \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+}
+
+#define SCIF_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIF, baseaddr, irq), \
+ .scbrr_algo_id = SCBRR_ALGO_2, \
+ .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+
+static const struct plat_sci_port scif[] = {
+ SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+ SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+ SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+ SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+ SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+ SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+ SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+ SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+};
+
+static inline void r8a7790_register_scif(int idx)
+{
+ platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+ sizeof(struct plat_sci_port));
+}
+
void __init r8a7790_add_standard_devices(void)
{
+ r8a7790_register_scif(SCIFA0);
+ r8a7790_register_scif(SCIFA1);
+ r8a7790_register_scif(SCIFB0);
+ r8a7790_register_scif(SCIFB1);
+ r8a7790_register_scif(SCIFB2);
+ r8a7790_register_scif(SCIFA2);
+ r8a7790_register_scif(SCIF0);
+ r8a7790_register_scif(SCIF1);
}
#ifdef CONFIG_USE_OF
next prev parent reply other threads:[~2013-03-27 15:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-27 15:49 [PATCH 00/04 v2] ARM: shmobile: r8a7790 SoC Magnus Damm
2013-03-27 15:49 ` Magnus Damm
2013-03-27 15:49 ` [PATCH 01/04] ARM: shmobile: Initial r8a7790 SoC support Magnus Damm
2013-03-27 15:49 ` Magnus Damm
2013-03-27 15:49 ` Magnus Damm [this message]
2013-03-27 15:49 ` [PATCH 02/04] ARM: shmobile: r8a7790 SCIF support Magnus Damm
2013-03-27 15:49 ` [PATCH 03/04] ARM: shmobile: r8a7790 IRQC support Magnus Damm
2013-03-27 15:49 ` Magnus Damm
2013-03-27 15:50 ` [PATCH 04/04] ARM: shmobile: r8a7790 PFC support Magnus Damm
2013-03-27 15:50 ` Magnus Damm
2013-04-02 4:33 ` [PATCH 00/04 v2] ARM: shmobile: r8a7790 SoC Simon Horman
2013-04-02 4:33 ` Simon Horman
-- strict thread matches above, loose matches on Subject: below --
2013-03-20 14:36 [PATCH 00/04] ARM: shmobile: r8a7790 SoC and Lager board support Magnus Damm
2013-03-20 14:36 ` [PATCH 02/04] ARM: shmobile: r8a7790 SCIF support Magnus Damm
2013-03-20 14:36 ` Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130327154944.10876.63305.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.