All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul@intel.com>
To: Padmavathi Venna <padma.v@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org,
	devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, padma.kvr@gmail.com,
	sbkim73@samsung.com, broonie@opensource.wolfsonmicro.com,
	kgene.kim@samsung.com, arnd@arndb.de, boojin.kim@samsung.com
Subject: Re: [PATCH V3] DMA: PL330: Add check if device tree compatible
Date: Tue, 2 Apr 2013 23:12:16 +0530	[thread overview]
Message-ID: <20130402174216.GM10326@intel.com> (raw)
In-Reply-To: <1364901405-16541-1-git-send-email-padma.v@samsung.com>

On Tue, Apr 02, 2013 at 04:46:45PM +0530, Padmavathi Venna wrote:
> This patch register the dma controller with generic dma helpers only
> in DT case. This also adds some extra error handling in the driver.
> 
> Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
> Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
> ---
> 
> Based on Vinod Koul next branch.
> 
> Changes since V2:
> 	- Removed pl330_free_chan_resources for error handling in probe. 
> 
> Changes since V1:
> 	- return silently when of_dma_controller_register fails, as
> 	  suggested by Arnd.
> 
>  drivers/dma/pl330.c |   33 ++++++++++++++++++++++-----------
>  1 files changed, 22 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 345e2a1..fa388c1c 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -2882,7 +2882,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
>  {
>  	struct dma_pl330_platdata *pdat;
>  	struct dma_pl330_dmac *pdmac;
> -	struct dma_pl330_chan *pch;
> +	struct dma_pl330_chan *pch, *_p;
>  	struct pl330_info *pi;
>  	struct dma_device *pd;
>  	struct resource *res;
> @@ -2984,7 +2984,17 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
>  	ret = dma_async_device_register(pd);
>  	if (ret) {
>  		dev_err(&adev->dev, "unable to register DMAC\n");
> -		goto probe_err2;
> +		goto probe_err3;
> +	}
> +
> +	if (adev->dev.of_node) {
> +		ret = of_dma_controller_register(adev->dev.of_node,
> +					 of_dma_pl330_xlate, pdmac);
> +		if (ret) {
> +			dev_err(&adev->dev,
> +				"unable to register DMA to the generic"
> +				"DT DMA helpers\n");
This could have been in a single line

I have applied it to fixes.

--
~Vinod
> +		}
>  	}
>  
>  	dev_info(&adev->dev,
> @@ -2995,16 +3005,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
>  		pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
>  		pi->pcfg.num_peri, pi->pcfg.num_events);
>  
> -	ret = of_dma_controller_register(adev->dev.of_node,
> -					 of_dma_pl330_xlate, pdmac);
> -	if (ret) {
> -		dev_err(&adev->dev,
> -		"unable to register DMA to the generic DT DMA helpers\n");
> -		goto probe_err2;
> -	}
> -
>  	return 0;
> +probe_err3:
> +	amba_set_drvdata(adev, NULL);
>  
> +	/* Idle the DMAC */
> +	list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
> +			chan.device_node)
> +		/* Remove the channel */
> +		list_del(&pch->chan.device_node);
>  probe_err2:
>  	pl330_del(pi);
>  probe_err1:
> @@ -3023,8 +3032,10 @@ static int pl330_remove(struct amba_device *adev)
>  	if (!pdmac)
>  		return 0;
>  
> -	of_dma_controller_free(adev->dev.of_node);
> +	if (adev->dev.of_node)
> +		of_dma_controller_free(adev->dev.of_node);
>  
> +	dma_async_device_unregister(&pdmac->ddma);
>  	amba_set_drvdata(adev, NULL);
>  
>  	/* Idle the DMAC */
> -- 
> 1.7.4.4
> 

WARNING: multiple messages have this Message-ID (diff)
From: vinod.koul@intel.com (Vinod Koul)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3] DMA: PL330: Add check if device tree compatible
Date: Tue, 2 Apr 2013 23:12:16 +0530	[thread overview]
Message-ID: <20130402174216.GM10326@intel.com> (raw)
In-Reply-To: <1364901405-16541-1-git-send-email-padma.v@samsung.com>

On Tue, Apr 02, 2013 at 04:46:45PM +0530, Padmavathi Venna wrote:
> This patch register the dma controller with generic dma helpers only
> in DT case. This also adds some extra error handling in the driver.
> 
> Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
> Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
> ---
> 
> Based on Vinod Koul next branch.
> 
> Changes since V2:
> 	- Removed pl330_free_chan_resources for error handling in probe. 
> 
> Changes since V1:
> 	- return silently when of_dma_controller_register fails, as
> 	  suggested by Arnd.
> 
>  drivers/dma/pl330.c |   33 ++++++++++++++++++++++-----------
>  1 files changed, 22 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 345e2a1..fa388c1c 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -2882,7 +2882,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
>  {
>  	struct dma_pl330_platdata *pdat;
>  	struct dma_pl330_dmac *pdmac;
> -	struct dma_pl330_chan *pch;
> +	struct dma_pl330_chan *pch, *_p;
>  	struct pl330_info *pi;
>  	struct dma_device *pd;
>  	struct resource *res;
> @@ -2984,7 +2984,17 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
>  	ret = dma_async_device_register(pd);
>  	if (ret) {
>  		dev_err(&adev->dev, "unable to register DMAC\n");
> -		goto probe_err2;
> +		goto probe_err3;
> +	}
> +
> +	if (adev->dev.of_node) {
> +		ret = of_dma_controller_register(adev->dev.of_node,
> +					 of_dma_pl330_xlate, pdmac);
> +		if (ret) {
> +			dev_err(&adev->dev,
> +				"unable to register DMA to the generic"
> +				"DT DMA helpers\n");
This could have been in a single line

I have applied it to fixes.

--
~Vinod
> +		}
>  	}
>  
>  	dev_info(&adev->dev,
> @@ -2995,16 +3005,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
>  		pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
>  		pi->pcfg.num_peri, pi->pcfg.num_events);
>  
> -	ret = of_dma_controller_register(adev->dev.of_node,
> -					 of_dma_pl330_xlate, pdmac);
> -	if (ret) {
> -		dev_err(&adev->dev,
> -		"unable to register DMA to the generic DT DMA helpers\n");
> -		goto probe_err2;
> -	}
> -
>  	return 0;
> +probe_err3:
> +	amba_set_drvdata(adev, NULL);
>  
> +	/* Idle the DMAC */
> +	list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
> +			chan.device_node)
> +		/* Remove the channel */
> +		list_del(&pch->chan.device_node);
>  probe_err2:
>  	pl330_del(pi);
>  probe_err1:
> @@ -3023,8 +3032,10 @@ static int pl330_remove(struct amba_device *adev)
>  	if (!pdmac)
>  		return 0;
>  
> -	of_dma_controller_free(adev->dev.of_node);
> +	if (adev->dev.of_node)
> +		of_dma_controller_free(adev->dev.of_node);
>  
> +	dma_async_device_unregister(&pdmac->ddma);
>  	amba_set_drvdata(adev, NULL);
>  
>  	/* Idle the DMAC */
> -- 
> 1.7.4.4
> 

  reply	other threads:[~2013-04-02 18:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-02 11:16 [PATCH V3] DMA: PL330: Add check if device tree compatible Padmavathi Venna
2013-04-02 11:16 ` Padmavathi Venna
2013-04-02 17:42 ` Vinod Koul [this message]
2013-04-02 17:42   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130402174216.GM10326@intel.com \
    --to=vinod.koul@intel.com \
    --cc=arnd@arndb.de \
    --cc=boojin.kim@samsung.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=padma.kvr@gmail.com \
    --cc=padma.v@samsung.com \
    --cc=sbkim73@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.