* [PATCH 11/17 v2] wpa-supplicant: Split recipe
@ 2013-04-01 14:56 Franklin S. Cooper Jr
2013-04-01 14:56 ` [PATCH 17/17 v2] arago.conf: Set PREFERRED_VERSIONs for Wilink 6 recipes Franklin S. Cooper Jr
0 siblings, 1 reply; 4+ messages in thread
From: Franklin S. Cooper Jr @ 2013-04-01 14:56 UTC (permalink / raw)
To: meta-arago; +Cc: Franklin S. Cooper Jr
* Split recipe to allow multiple versions of wpa-supplicant to exist.
* Rename recipe to match the actual version of the TI modified wpa-supplicant.
* Update recipe's bbappend
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
---
Version 2 changes:
Remove "-" from recipe PR_append
Removed references to kill_wpa_supplicant
Add LICENSE field back to common .inc
Add rename of bbappend to this patch.
....bbappend => wpa-supplicant_r5.sp4.01.bbappend} | 0
.../defconfig | 0
.../wpa-supplicant/wpa-supplicant.inc | 113 ++++++++++++++++++
.../wpa-supplicant/kill_wpa_supplicant.sh | 9 --
.../wpa-supplicant/wpa-supplicant_git.bb | 120 --------------------
.../wpa-supplicant/wpa-supplicant_r5.sp4.01.bb | 12 ++
6 files changed, 125 insertions(+), 129 deletions(-)
rename meta-arago-distro/recipes-connectivity/wpa-supplicant/{wpa-supplicant_git.bbappend => wpa-supplicant_r5.sp4.01.bbappend} (100%)
rename meta-arago-extras/recipes-connectivity/wpa-supplicant/{wpa-supplicant => wpa-supplicant-r5.sp4.01}/defconfig (100%)
create mode 100644 meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc
delete mode 100644 meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/kill_wpa_supplicant.sh
delete mode 100644 meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_git.bb
create mode 100644 meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_r5.sp4.01.bb
diff --git a/meta-arago-distro/recipes-connectivity/wpa-supplicant/wpa-supplicant_git.bbappend b/meta-arago-distro/recipes-connectivity/wpa-supplicant/wpa-supplicant_r5.sp4.01.bbappend
similarity index 100%
rename from meta-arago-distro/recipes-connectivity/wpa-supplicant/wpa-supplicant_git.bbappend
rename to meta-arago-distro/recipes-connectivity/wpa-supplicant/wpa-supplicant_r5.sp4.01.bbappend
diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-r5.sp4.01/defconfig
similarity index 100%
rename from meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
rename to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-r5.sp4.01/defconfig
diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc
new file mode 100644
index 0000000..410e6e3
--- /dev/null
+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc
@@ -0,0 +1,113 @@
+# This is a TI specific version of the wpa-supplicant recipe for use with the
+# wl12xx wlan and bluetooth module.
+
+DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
+HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
+BUGTRACKER = "http://hostap.epitest.fi/bugz/"
+SECTION = "network"
+LICENSE = "GPLv2 | BSD"
+
+DEPENDS = "gnutls dbus libnl openssl ${@base_contains("COMBINED_FEATURES", "madwifi", "madwifi-ng", "",d)}"
+RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
+
+# To prevent users from accidently picking up this customized version of
+# wpa-supplicant the DEFAULT_PREFERENCE will be set to -1.
+DEFAULT_PREFERENCE = "-1"
+
+PR = "r5"
+
+SRC_URI = "git://github.com/TI-OpenLink/hostap.git;protocol=git \
+ file://defconfig \
+ file://defaults-sane \
+ file://wpa-supplicant.sh \
+ file://wpa_supplicant.conf \
+ file://wpa_supplicant.conf-sane \
+ file://99_wpa_supplicant \
+ file://wpa_supplicant.conf \
+ file://fi.epitest.hostap.WPASupplicant.service \
+ file://fi.w1.wpa_supplicant1.service \
+ "
+
+S = "${WORKDIR}/git/wpa_supplicant"
+
+PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
+FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
+FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
+FILES_${PN} += " /usr/share/dbus-1/system-services/*"
+
+#we introduce MY_ARCH to get 'armv5te' as arch instead of the misleading 'arm' on armv5te builds
+MY_ARCH := "${PACKAGE_ARCH}"
+PACKAGE_ARCH = "${@base_contains('COMBINED_FEATURES', 'madwifi', '${MACHINE_ARCH}', '${MY_ARCH}', d)}"
+
+do_compile () {
+ make
+}
+
+do_install () {
+ install -d ${D}${sbindir}
+ install -m 755 wpa_supplicant ${D}${sbindir}
+ install -m 755 wpa_passphrase ${D}${sbindir}
+ install -m 755 wpa_cli ${D}${sbindir}
+
+ install -d ${D}${docdir}/wpa_supplicant
+ install -m 644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
+
+ install -d ${D}${sysconfdir}/default
+ install -m 600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa
+ install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
+
+ if grep -q ^CONFIG_CTRL_IFACE_DBUS=y .config || grep -q ^CONFIG_CTRL_IFACE_DBUS_NEW=y .config; then
+ install -d ${D}/${sysconfdir}/dbus-1/system.d
+ install -m 644 ${S}/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d
+ install -d ${D}/${datadir}/dbus-1/system-services
+ if grep -q ^CONFIG_CTRL_IFACE_DBUS=y .config; then
+ sed -i -e s:/sbin:${sbindir}:g ${S}/dbus/fi.epitest.hostap.WPASupplicant.service
+ install -m 644 ${S}/dbus/fi.epitest.hostap.WPASupplicant.service ${D}/${datadir}/dbus-1/system-services
+ fi
+ if grep -q ^CONFIG_CTRL_IFACE_DBUS_NEW=y .config; then
+ sed -i -e s:/sbin:${sbindir}:g ${S}/dbus/fi.w1.wpa_supplicant1.service
+ install -m 644 ${S}/dbus/fi.w1.wpa_supplicant1.service ${D}/${datadir}/dbus-1/system-services
+ fi
+ fi
+
+ install -d ${D}${sysconfdir}/network/if-pre-up.d/
+ install -d ${D}${sysconfdir}/network/if-post-down.d/
+ install -d ${D}${sysconfdir}/network/if-down.d/
+ install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
+ install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant
+ cd ${D}${sysconfdir}/network/ && \
+ ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant
+
+ install -d ${D}/etc/default/volatiles
+ install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles
+
+ install -d 2755 ${D}/usr/share/dbus-1/system-services
+ install -d 2755 ${D}/etc
+ install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}/etc
+ install -m 644 ${WORKDIR}/fi.epitest.hostap.WPASupplicant.service ${D}/usr/share/dbus-1/system-services
+ install -m 644 ${WORKDIR}/fi.w1.wpa_supplicant1.service ${D}/usr/share/dbus-1/system-services
+}
+
+pkg_postinst_wpa-supplicant () {
+ # can't do this offline
+ if [ "x$D" != "x" ]; then
+ exit 1
+ fi
+
+ DBUSPID=`pidof dbus-daemon`
+
+ if [ "x$DBUSPID" != "x" ]; then
+ /etc/init.d/dbus-1 reload
+ fi
+}
+
+do_configure () {
+ install -m 0755 ${WORKDIR}/defconfig .config
+ echo "CFLAGS += -I${STAGING_INCDIR}" >> .config
+ echo "LIBS += -L${STAGING_LIBDIR}" >> .config
+ echo "LIBS_p += -L${STAGING_LIBDIR}" >> .config
+ if [ "${@base_contains('COMBINED_FEATURES', 'madwifi', 1, 0, d)}" = "1" ]; then
+ echo "CONFIG_DRIVER_MADWIFI=y" >> .config
+ echo "CFLAGS += -I${STAGING_INCDIR}/madwifi-ng" >> .config
+ fi
+}
diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/kill_wpa_supplicant.sh b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/kill_wpa_supplicant.sh
deleted file mode 100644
index aab6474..0000000
--- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/kill_wpa_supplicant.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#check if the wpa_suppicant is already running
-#if it does, stop it.
-StationRunning=`ps | grep -c wpa_supplicant`
-if [ $StationRunning -eq 2 ]; then
- killall wpa_supplicant
-fi
-
-# start the application
-$*
diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_git.bb b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_git.bb
deleted file mode 100644
index 927a556..0000000
--- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_git.bb
+++ /dev/null
@@ -1,120 +0,0 @@
-# This is a TI specific version of the wpa-supplicant recipe for use with the
-# wl12xx wlan and bluetooth module.
-
-DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)."
-HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
-BUGTRACKER = "http://hostap.epitest.fi/bugz/"
-SECTION = "network"
-LICENSE = "GPLv2 | BSD"
-LIC_FILES_CHKSUM = "file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e \
- file://../README;md5=5cb758942d25f6f61fd4ac388fd446fa \
- file://wpa_supplicant.c;beginline=1;endline=17;md5=8835156c8ab8cad6356ec7f39ebe3aba"
-DEPENDS = "gnutls dbus libnl openssl ${@base_contains("COMBINED_FEATURES", "madwifi", "madwifi-ng", "",d)}"
-RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
-
-# To prevent users from accidently picking up this customized version of
-# wpa-supplicant the DEFAULT_PREFERENCE will be set to -1.
-DEFAULT_PREFERENCE = "-1"
-
-SRCREV = "ol_R5.SP4.01"
-PR = "r3+gitr${SRCPV}"
-# Add ti to the PV to indicate that this is a TI modify version of wpa-supplicant.
-PV = "2.0-devel-ti"
-
-SRC_URI = "git://github.com/TI-OpenLink/hostap.git;protocol=git \
- file://defconfig \
- file://defaults-sane \
- file://wpa-supplicant.sh \
- file://kill_wpa_supplicant.sh \
- file://wpa_supplicant.conf \
- file://wpa_supplicant.conf-sane \
- file://99_wpa_supplicant \
- file://wpa_supplicant.conf \
- file://fi.epitest.hostap.WPASupplicant.service \
- file://fi.w1.wpa_supplicant1.service \
- "
-
-S = "${WORKDIR}/git/wpa_supplicant"
-
-PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
-FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
-FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
-FILES_${PN} += " /usr/share/dbus-1/system-services/* /usr/sbin/kill_wpa_supplicant.sh"
-
-#we introduce MY_ARCH to get 'armv5te' as arch instead of the misleading 'arm' on armv5te builds
-MY_ARCH := "${PACKAGE_ARCH}"
-PACKAGE_ARCH = "${@base_contains('COMBINED_FEATURES', 'madwifi', '${MACHINE_ARCH}', '${MY_ARCH}', d)}"
-
-do_compile () {
- make
-}
-
-do_install () {
- install -d ${D}${sbindir}
- install -m 755 wpa_supplicant ${D}${sbindir}
- install -m 755 wpa_passphrase ${D}${sbindir}
- install -m 755 wpa_cli ${D}${sbindir}
- install -m 755 ${WORKDIR}/kill_wpa_supplicant.sh ${D}${sbindir}
-
- install -d ${D}${docdir}/wpa_supplicant
- install -m 644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
-
- install -d ${D}${sysconfdir}/default
- install -m 600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa
- install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
-
- if grep -q ^CONFIG_CTRL_IFACE_DBUS=y .config || grep -q ^CONFIG_CTRL_IFACE_DBUS_NEW=y .config; then
- install -d ${D}/${sysconfdir}/dbus-1/system.d
- install -m 644 ${S}/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d
- install -d ${D}/${datadir}/dbus-1/system-services
- if grep -q ^CONFIG_CTRL_IFACE_DBUS=y .config; then
- sed -i -e s:/sbin:${sbindir}:g ${S}/dbus/fi.epitest.hostap.WPASupplicant.service
- install -m 644 ${S}/dbus/fi.epitest.hostap.WPASupplicant.service ${D}/${datadir}/dbus-1/system-services
- fi
- if grep -q ^CONFIG_CTRL_IFACE_DBUS_NEW=y .config; then
- sed -i -e s:/sbin:${sbindir}:g ${S}/dbus/fi.w1.wpa_supplicant1.service
- install -m 644 ${S}/dbus/fi.w1.wpa_supplicant1.service ${D}/${datadir}/dbus-1/system-services
- fi
- fi
-
- install -d ${D}${sysconfdir}/network/if-pre-up.d/
- install -d ${D}${sysconfdir}/network/if-post-down.d/
- install -d ${D}${sysconfdir}/network/if-down.d/
- install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
- install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant
- cd ${D}${sysconfdir}/network/ && \
- ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant
-
- install -d ${D}/etc/default/volatiles
- install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles
-
- install -d 2755 ${D}/usr/share/dbus-1/system-services
- install -d 2755 ${D}/etc
- install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}/etc
- install -m 644 ${WORKDIR}/fi.epitest.hostap.WPASupplicant.service ${D}/usr/share/dbus-1/system-services
- install -m 644 ${WORKDIR}/fi.w1.wpa_supplicant1.service ${D}/usr/share/dbus-1/system-services
-}
-
-pkg_postinst_wpa-supplicant () {
- # can't do this offline
- if [ "x$D" != "x" ]; then
- exit 1
- fi
-
- DBUSPID=`pidof dbus-daemon`
-
- if [ "x$DBUSPID" != "x" ]; then
- /etc/init.d/dbus-1 reload
- fi
-}
-
-do_configure () {
- install -m 0755 ${WORKDIR}/defconfig .config
- echo "CFLAGS += -I${STAGING_INCDIR}" >> .config
- echo "LIBS += -L${STAGING_LIBDIR}" >> .config
- echo "LIBS_p += -L${STAGING_LIBDIR}" >> .config
- if [ "${@base_contains('COMBINED_FEATURES', 'madwifi', 1, 0, d)}" = "1" ]; then
- echo "CONFIG_DRIVER_MADWIFI=y" >> .config
- echo "CFLAGS += -I${STAGING_INCDIR}/madwifi-ng" >> .config
- fi
-}
diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_r5.sp4.01.bb b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_r5.sp4.01.bb
new file mode 100644
index 0000000..d1ff079
--- /dev/null
+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant_r5.sp4.01.bb
@@ -0,0 +1,12 @@
+# This is a TI specific version of the wpa-supplicant recipe for use with the
+# wl12xx wlan and bluetooth module.
+
+require wpa-supplicant.inc
+
+LIC_FILES_CHKSUM = "file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e \
+ file://../README;md5=5cb758942d25f6f61fd4ac388fd446fa \
+ file://wpa_supplicant.c;beginline=1;endline=17;md5=8835156c8ab8cad6356ec7f39ebe3aba"
+
+
+SRCREV = "ol_R5.SP4.01"
+PR_append = "a+gitr${SRCPV}"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 17/17 v2] arago.conf: Set PREFERRED_VERSIONs for Wilink 6 recipes
2013-04-01 14:56 [PATCH 11/17 v2] wpa-supplicant: Split recipe Franklin S. Cooper Jr
@ 2013-04-01 14:56 ` Franklin S. Cooper Jr
2013-04-05 18:47 ` Denys Dmytriyenko
0 siblings, 1 reply; 4+ messages in thread
From: Franklin S. Cooper Jr @ 2013-04-01 14:56 UTC (permalink / raw)
To: meta-arago; +Cc: Franklin S. Cooper Jr
* Currently two versions of Wilink 6 need to be supported.
* The latest version supports the PG 3 wilink 6 module which is the version that
comes with the am37x-evm and am335x-evm .
* An older version supports the PG 2 wilink 6 module which is the version that
comes with the am180x-evm.
* Specifying the PREFERRED_VERSION to match this requirement.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
---
Version 2 changes:
None. Apart of new patchset.
meta-arago-distro/conf/distro/arago.conf | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/meta-arago-distro/conf/distro/arago.conf b/meta-arago-distro/conf/distro/arago.conf
index 9e43ea3..44141c1 100644
--- a/meta-arago-distro/conf/distro/arago.conf
+++ b/meta-arago-distro/conf/distro/arago.conf
@@ -105,6 +105,23 @@ PREFERRED_VERSION_bluez-hcidump = "2.2"
PREFERRED_VERSION_bash = "3.2.48"
PREFERRED_VERSION_gettext = "0.16.1"
+# Support Wilink 6 PG 3 modules
+PREFERRED_VERSION_ti-compat-bluetooth = "r5.sp3.05"
+PREFERRED_VERSION_ti-compat-wireless-wl12xx = "r5.sp4.01"
+PREFERRED_VERSION_wl12xx-firmware = "r5.sp4.01"
+PREFERRED_VERSION_wpa-supplicant = "r5.sp4.01"
+PREFERRED_VERSION_hostap-daemon = "r5.sp4.01"
+PREFERRED_VERSION_ti-wifi-utils = "r5.sp3.05"
+
+# Support Wilink 6 PG 2 modules
+# By default am180x-evms come with an outdated wilink 6 module
+PREFERRED_VERSION_ti-compat-bluetooth_am180x-evm = "r5.00.18"
+PREFERRED_VERSION_ti-compat-wireless-wl12xx_am180x-evm = "r5.00.18"
+PREFERRED_VERSION_wl12xx-firmware_am180x-evm = "r5.00.18"
+PREFERRED_VERSION_wpa-supplicant_am180x-evm = "r5.00.18"
+PREFERRED_VERSION_hostap-daemon_am180x-evm = "r5.00.18"
+PREFERRED_VERSION_ti-wifi-utils_am180x-evm = "r5.00.18"
+
# Disable polkit's systemd configuration from meta-oe
POLKITAUTH = ""
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 17/17 v2] arago.conf: Set PREFERRED_VERSIONs for Wilink 6 recipes
2013-04-01 14:56 ` [PATCH 17/17 v2] arago.conf: Set PREFERRED_VERSIONs for Wilink 6 recipes Franklin S. Cooper Jr
@ 2013-04-05 18:47 ` Denys Dmytriyenko
2013-04-05 22:55 ` Denys Dmytriyenko
0 siblings, 1 reply; 4+ messages in thread
From: Denys Dmytriyenko @ 2013-04-05 18:47 UTC (permalink / raw)
To: Franklin S. Cooper Jr; +Cc: meta-arago
On Mon, Apr 01, 2013 at 09:56:47AM -0500, Franklin S. Cooper Jr wrote:
> * Currently two versions of Wilink 6 need to be supported.
> * The latest version supports the PG 3 wilink 6 module which is the version that
> comes with the am37x-evm and am335x-evm .
> * An older version supports the PG 2 wilink 6 module which is the version that
> comes with the am180x-evm.
> * Specifying the PREFERRED_VERSION to match this requirement.
>
> Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
> ---
> Version 2 changes:
> None. Apart of new patchset.
>
> meta-arago-distro/conf/distro/arago.conf | 17 +++++++++++++++++
> 1 files changed, 17 insertions(+), 0 deletions(-)
>
> diff --git a/meta-arago-distro/conf/distro/arago.conf b/meta-arago-distro/conf/distro/arago.conf
> index 9e43ea3..44141c1 100644
> --- a/meta-arago-distro/conf/distro/arago.conf
> +++ b/meta-arago-distro/conf/distro/arago.conf
> @@ -105,6 +105,23 @@ PREFERRED_VERSION_bluez-hcidump = "2.2"
> PREFERRED_VERSION_bash = "3.2.48"
> PREFERRED_VERSION_gettext = "0.16.1"
>
> +# Support Wilink 6 PG 3 modules
> +PREFERRED_VERSION_ti-compat-bluetooth = "r5.sp3.05"
> +PREFERRED_VERSION_ti-compat-wireless-wl12xx = "r5.sp4.01"
> +PREFERRED_VERSION_wl12xx-firmware = "r5.sp4.01"
> +PREFERRED_VERSION_wpa-supplicant = "r5.sp4.01"
> +PREFERRED_VERSION_hostap-daemon = "r5.sp4.01"
> +PREFERRED_VERSION_ti-wifi-utils = "r5.sp3.05"
> +
> +# Support Wilink 6 PG 2 modules
> +# By default am180x-evms come with an outdated wilink 6 module
> +PREFERRED_VERSION_ti-compat-bluetooth_am180x-evm = "r5.00.18"
> +PREFERRED_VERSION_ti-compat-wireless-wl12xx_am180x-evm = "r5.00.18"
> +PREFERRED_VERSION_wl12xx-firmware_am180x-evm = "r5.00.18"
> +PREFERRED_VERSION_wpa-supplicant_am180x-evm = "r5.00.18"
> +PREFERRED_VERSION_hostap-daemon_am180x-evm = "r5.00.18"
> +PREFERRED_VERSION_ti-wifi-utils_am180x-evm = "r5.00.18"
Ok, I've been thinking about this versioning model for some time - it's quite
ambiguous and can be a source of all kind of sorting problems. Here you set
preferred versions, which is good for the build. But from a package manager
it's unclear which one is preferred, moreover, if one is a clear upgrade path
for the other, or not... So, basically, there will be problems in the field
with this split and versioning of those packages. But I'm not sure if there's
a better way to handle this exception.
--
Denys
> # Disable polkit's systemd configuration from meta-oe
> POLKITAUTH = ""
>
> --
> 1.7.0.4
>
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 17/17 v2] arago.conf: Set PREFERRED_VERSIONs for Wilink 6 recipes
2013-04-05 18:47 ` Denys Dmytriyenko
@ 2013-04-05 22:55 ` Denys Dmytriyenko
0 siblings, 0 replies; 4+ messages in thread
From: Denys Dmytriyenko @ 2013-04-05 22:55 UTC (permalink / raw)
To: Franklin S. Cooper Jr, meta-arago
On Fri, Apr 05, 2013 at 02:47:00PM -0400, Denys Dmytriyenko wrote:
> On Mon, Apr 01, 2013 at 09:56:47AM -0500, Franklin S. Cooper Jr wrote:
> > * Currently two versions of Wilink 6 need to be supported.
> > * The latest version supports the PG 3 wilink 6 module which is the version that
> > comes with the am37x-evm and am335x-evm .
> > * An older version supports the PG 2 wilink 6 module which is the version that
> > comes with the am180x-evm.
> > * Specifying the PREFERRED_VERSION to match this requirement.
> >
> > Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
> > ---
> > Version 2 changes:
> > None. Apart of new patchset.
> >
> > meta-arago-distro/conf/distro/arago.conf | 17 +++++++++++++++++
> > 1 files changed, 17 insertions(+), 0 deletions(-)
> >
> > diff --git a/meta-arago-distro/conf/distro/arago.conf b/meta-arago-distro/conf/distro/arago.conf
> > index 9e43ea3..44141c1 100644
> > --- a/meta-arago-distro/conf/distro/arago.conf
> > +++ b/meta-arago-distro/conf/distro/arago.conf
> > @@ -105,6 +105,23 @@ PREFERRED_VERSION_bluez-hcidump = "2.2"
> > PREFERRED_VERSION_bash = "3.2.48"
> > PREFERRED_VERSION_gettext = "0.16.1"
> >
> > +# Support Wilink 6 PG 3 modules
> > +PREFERRED_VERSION_ti-compat-bluetooth = "r5.sp3.05"
> > +PREFERRED_VERSION_ti-compat-wireless-wl12xx = "r5.sp4.01"
> > +PREFERRED_VERSION_wl12xx-firmware = "r5.sp4.01"
> > +PREFERRED_VERSION_wpa-supplicant = "r5.sp4.01"
> > +PREFERRED_VERSION_hostap-daemon = "r5.sp4.01"
> > +PREFERRED_VERSION_ti-wifi-utils = "r5.sp3.05"
> > +
> > +# Support Wilink 6 PG 2 modules
> > +# By default am180x-evms come with an outdated wilink 6 module
> > +PREFERRED_VERSION_ti-compat-bluetooth_am180x-evm = "r5.00.18"
> > +PREFERRED_VERSION_ti-compat-wireless-wl12xx_am180x-evm = "r5.00.18"
> > +PREFERRED_VERSION_wl12xx-firmware_am180x-evm = "r5.00.18"
> > +PREFERRED_VERSION_wpa-supplicant_am180x-evm = "r5.00.18"
> > +PREFERRED_VERSION_hostap-daemon_am180x-evm = "r5.00.18"
> > +PREFERRED_VERSION_ti-wifi-utils_am180x-evm = "r5.00.18"
>
> Ok, I've been thinking about this versioning model for some time - it's quite
> ambiguous and can be a source of all kind of sorting problems. Here you set
> preferred versions, which is good for the build. But from a package manager
> it's unclear which one is preferred, moreover, if one is a clear upgrade path
> for the other, or not... So, basically, there will be problems in the field
> with this split and versioning of those packages. But I'm not sure if there's
> a better way to handle this exception.
And another potential problem I see is that none of those packages are marked
as machine-specific. In case there are other armv5te machines in the build,
there will be a conflict between packages...
--
Denys
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-04-05 22:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-01 14:56 [PATCH 11/17 v2] wpa-supplicant: Split recipe Franklin S. Cooper Jr
2013-04-01 14:56 ` [PATCH 17/17 v2] arago.conf: Set PREFERRED_VERSIONs for Wilink 6 recipes Franklin S. Cooper Jr
2013-04-05 18:47 ` Denys Dmytriyenko
2013-04-05 22:55 ` Denys Dmytriyenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.