* [PATCH RESEND 0/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition
@ 2013-03-14 0:11 ` Ruslan Bilovol
0 siblings, 0 replies; 6+ messages in thread
From: Ruslan Bilovol @ 2013-03-14 0:11 UTC (permalink / raw)
To: tony, linux, linux-arm-kernel, linux-omap
Hello guys,
This is a resend of my quite old patch
( https://patchwork.kernel.org/patch/1130991/ ) that
was submitted 9 months ago but I suddenly found that
it is still not picked up in the mainline.
It will be needed for OMAP USB Host HW errata (i687)
implementation that will be sent in a separate patch later
Regards,
Ruslan
Ruslan Bilovol (1):
omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register
definition
arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 45 +++++++++++++++++++++++
1 file changed, 45 insertions(+)
--
1.7.9.5
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH RESEND 0/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition
@ 2013-03-14 0:11 ` Ruslan Bilovol
0 siblings, 0 replies; 6+ messages in thread
From: Ruslan Bilovol @ 2013-03-14 0:11 UTC (permalink / raw)
To: linux-arm-kernel
Hello guys,
This is a resend of my quite old patch
( https://patchwork.kernel.org/patch/1130991/ ) that
was submitted 9 months ago but I suddenly found that
it is still not picked up in the mainline.
It will be needed for OMAP USB Host HW errata (i687)
implementation that will be sent in a separate patch later
Regards,
Ruslan
Ruslan Bilovol (1):
omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register
definition
arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 45 +++++++++++++++++++++++
1 file changed, 45 insertions(+)
--
1.7.9.5
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH RESEND 1/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition
2013-03-14 0:11 ` Ruslan Bilovol
@ 2013-03-14 0:11 ` Ruslan Bilovol
-1 siblings, 0 replies; 6+ messages in thread
From: Ruslan Bilovol @ 2013-03-14 0:11 UTC (permalink / raw)
To: tony, linux, linux-arm-kernel, linux-omap
This patch adds missing CONTROL_SMART2IO_PADCONF_2 register
definition
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
---
arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 45 +++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
index c88420d..d512ade 100644
--- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
+++ b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
@@ -46,6 +46,7 @@
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2 0x05cc
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
@@ -764,6 +765,50 @@
#define OMAP4_HSI_DR0_LB_SHIFT 10
#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
+/* CONTROL_SMART2IO_PADCONF_2 */
+#define OMAP4_DPM_DR1_DS_SHIFT 31
+#define OMAP4_DPM_DR1_DS_MASK (1 << 31)
+#define OMAP4_DPM_DR2_DS_SHIFT 30
+#define OMAP4_DPM_DR2_DS_MASK (1 << 30)
+#define OMAP4_DPM_DR3_DS_SHIFT 29
+#define OMAP4_DPM_DR3_DS_MASK (1 << 29)
+#define OMAP4_GPIO_DR10_DS_SHIFT 28
+#define OMAP4_GPIO_DR10_DS_MASK (1 << 28)
+#define OMAP4_HSI2_DR0_DS_SHIFT 27
+#define OMAP4_HSI2_DR0_DS_MASK (1 << 27)
+#define OMAP4_HSI2_DR1_DS_SHIFT 26
+#define OMAP4_HSI2_DR1_DS_MASK (1 << 26)
+#define OMAP4_HSI2_DR2_DS_SHIFT 25
+#define OMAP4_HSI2_DR2_DS_MASK (1 << 25)
+#define OMAP4_SDMMC3_DR0_DS_SHIFT 24
+#define OMAP4_SDMMC3_DR0_DS_MASK (1 << 24)
+#define OMAP4_SDMMC4_DR0_DS_SHIFT 23
+#define OMAP4_SDMMC4_DR0_DS_MASK (1 << 23)
+#define OMAP4_SDMMC4_DR1_DS_SHIFT 22
+#define OMAP4_SDMMC4_DR1_DS_MASK (1 << 22)
+#define OMAP4_SPI3_DR0_DS_SHIFT 21
+#define OMAP4_SPI3_DR0_DS_MASK (1 << 21)
+#define OMAP4_SPI3_DR1_DS_SHIFT 20
+#define OMAP4_SPI3_DR1_DS_MASK (1 << 20)
+#define OMAP4_UART3_DR2_DS_SHIFT 19
+#define OMAP4_UART3_DR2_DS_MASK (1 << 19)
+#define OMAP4_UART3_DR3_DS_SHIFT 18
+#define OMAP4_UART3_DR3_DS_MASK (1 << 18)
+#define OMAP4_UART3_DR4_DS_SHIFT 17
+#define OMAP4_UART3_DR4_DS_MASK (1 << 17)
+#define OMAP4_UART3_DR5_DS_SHIFT 16
+#define OMAP4_UART3_DR5_DS_MASK (1 << 16)
+#define OMAP4_USBA0_DR0_DS_SHIFT 15
+#define OMAP4_USBA0_DR0_DS_MASK (1 << 15)
+#define OMAP4_USBA0_DR1_DS_SHIFT 14
+#define OMAP4_USBA0_DR1_DS_MASK (1 << 14)
+#define OMAP4_USBA_DR2_DS_SHIFT 13
+#define OMAP4_USBA_DR2_DS_MASK (1 << 13)
+#define OMAP4_USBB2_DR0_DS_SHIFT 12
+#define OMAP4_USBB2_DR0_DS_MASK (1 << 12)
+#define OMAP4_USBB1_DR0_DS_SHIFT 11
+#define OMAP4_USBB1_DR0_DS_MASK (1 << 11)
+
/* CONTROL_USBB_HSIC */
#define OMAP4_USBB2_DR1_SR_SHIFT 30
#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH RESEND 1/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition
@ 2013-03-14 0:11 ` Ruslan Bilovol
0 siblings, 0 replies; 6+ messages in thread
From: Ruslan Bilovol @ 2013-03-14 0:11 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds missing CONTROL_SMART2IO_PADCONF_2 register
definition
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
---
arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 45 +++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
index c88420d..d512ade 100644
--- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
+++ b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
@@ -46,6 +46,7 @@
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2 0x05cc
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
@@ -764,6 +765,50 @@
#define OMAP4_HSI_DR0_LB_SHIFT 10
#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
+/* CONTROL_SMART2IO_PADCONF_2 */
+#define OMAP4_DPM_DR1_DS_SHIFT 31
+#define OMAP4_DPM_DR1_DS_MASK (1 << 31)
+#define OMAP4_DPM_DR2_DS_SHIFT 30
+#define OMAP4_DPM_DR2_DS_MASK (1 << 30)
+#define OMAP4_DPM_DR3_DS_SHIFT 29
+#define OMAP4_DPM_DR3_DS_MASK (1 << 29)
+#define OMAP4_GPIO_DR10_DS_SHIFT 28
+#define OMAP4_GPIO_DR10_DS_MASK (1 << 28)
+#define OMAP4_HSI2_DR0_DS_SHIFT 27
+#define OMAP4_HSI2_DR0_DS_MASK (1 << 27)
+#define OMAP4_HSI2_DR1_DS_SHIFT 26
+#define OMAP4_HSI2_DR1_DS_MASK (1 << 26)
+#define OMAP4_HSI2_DR2_DS_SHIFT 25
+#define OMAP4_HSI2_DR2_DS_MASK (1 << 25)
+#define OMAP4_SDMMC3_DR0_DS_SHIFT 24
+#define OMAP4_SDMMC3_DR0_DS_MASK (1 << 24)
+#define OMAP4_SDMMC4_DR0_DS_SHIFT 23
+#define OMAP4_SDMMC4_DR0_DS_MASK (1 << 23)
+#define OMAP4_SDMMC4_DR1_DS_SHIFT 22
+#define OMAP4_SDMMC4_DR1_DS_MASK (1 << 22)
+#define OMAP4_SPI3_DR0_DS_SHIFT 21
+#define OMAP4_SPI3_DR0_DS_MASK (1 << 21)
+#define OMAP4_SPI3_DR1_DS_SHIFT 20
+#define OMAP4_SPI3_DR1_DS_MASK (1 << 20)
+#define OMAP4_UART3_DR2_DS_SHIFT 19
+#define OMAP4_UART3_DR2_DS_MASK (1 << 19)
+#define OMAP4_UART3_DR3_DS_SHIFT 18
+#define OMAP4_UART3_DR3_DS_MASK (1 << 18)
+#define OMAP4_UART3_DR4_DS_SHIFT 17
+#define OMAP4_UART3_DR4_DS_MASK (1 << 17)
+#define OMAP4_UART3_DR5_DS_SHIFT 16
+#define OMAP4_UART3_DR5_DS_MASK (1 << 16)
+#define OMAP4_USBA0_DR0_DS_SHIFT 15
+#define OMAP4_USBA0_DR0_DS_MASK (1 << 15)
+#define OMAP4_USBA0_DR1_DS_SHIFT 14
+#define OMAP4_USBA0_DR1_DS_MASK (1 << 14)
+#define OMAP4_USBA_DR2_DS_SHIFT 13
+#define OMAP4_USBA_DR2_DS_MASK (1 << 13)
+#define OMAP4_USBB2_DR0_DS_SHIFT 12
+#define OMAP4_USBB2_DR0_DS_MASK (1 << 12)
+#define OMAP4_USBB1_DR0_DS_SHIFT 11
+#define OMAP4_USBB1_DR0_DS_MASK (1 << 11)
+
/* CONTROL_USBB_HSIC */
#define OMAP4_USBB2_DR1_SR_SHIFT 30
#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND 1/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition
2013-03-14 0:11 ` Ruslan Bilovol
@ 2013-04-08 20:56 ` Tony Lindgren
-1 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2013-04-08 20:56 UTC (permalink / raw)
To: Ruslan Bilovol; +Cc: linux, linux-arm-kernel, linux-omap
* Ruslan Bilovol <ruslan.bilovol@ti.com> [130313 17:16]:
> This patch adds missing CONTROL_SMART2IO_PADCONF_2 register
> definition
Sorry for the delay on this one. After looking at these registers,
there's no need to define them here.
These all relate to pinconf, and these all can now be handled by
generic pinconf using pinctrl-single.c. There's generic pinconf
support added to pinctrl-single.c in linux next by Haojian Zhuang.
This means that you can just define these in the .dts file for
the board, and you can select the board specific values for things
like output buffer.
In Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
you should see what all is already supported, and if it's not,
we can patch it in. That's in current linux next queued for
v3.10.
Regards,
Tony
> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
> ---
> arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 45 +++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
> index c88420d..d512ade 100644
> --- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
> +++ b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
> @@ -46,6 +46,7 @@
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
> +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2 0x05cc
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
> @@ -764,6 +765,50 @@
> #define OMAP4_HSI_DR0_LB_SHIFT 10
> #define OMAP4_HSI_DR0_LB_MASK (1 << 10)
>
> +/* CONTROL_SMART2IO_PADCONF_2 */
> +#define OMAP4_DPM_DR1_DS_SHIFT 31
> +#define OMAP4_DPM_DR1_DS_MASK (1 << 31)
> +#define OMAP4_DPM_DR2_DS_SHIFT 30
> +#define OMAP4_DPM_DR2_DS_MASK (1 << 30)
> +#define OMAP4_DPM_DR3_DS_SHIFT 29
> +#define OMAP4_DPM_DR3_DS_MASK (1 << 29)
> +#define OMAP4_GPIO_DR10_DS_SHIFT 28
> +#define OMAP4_GPIO_DR10_DS_MASK (1 << 28)
> +#define OMAP4_HSI2_DR0_DS_SHIFT 27
> +#define OMAP4_HSI2_DR0_DS_MASK (1 << 27)
> +#define OMAP4_HSI2_DR1_DS_SHIFT 26
> +#define OMAP4_HSI2_DR1_DS_MASK (1 << 26)
> +#define OMAP4_HSI2_DR2_DS_SHIFT 25
> +#define OMAP4_HSI2_DR2_DS_MASK (1 << 25)
> +#define OMAP4_SDMMC3_DR0_DS_SHIFT 24
> +#define OMAP4_SDMMC3_DR0_DS_MASK (1 << 24)
> +#define OMAP4_SDMMC4_DR0_DS_SHIFT 23
> +#define OMAP4_SDMMC4_DR0_DS_MASK (1 << 23)
> +#define OMAP4_SDMMC4_DR1_DS_SHIFT 22
> +#define OMAP4_SDMMC4_DR1_DS_MASK (1 << 22)
> +#define OMAP4_SPI3_DR0_DS_SHIFT 21
> +#define OMAP4_SPI3_DR0_DS_MASK (1 << 21)
> +#define OMAP4_SPI3_DR1_DS_SHIFT 20
> +#define OMAP4_SPI3_DR1_DS_MASK (1 << 20)
> +#define OMAP4_UART3_DR2_DS_SHIFT 19
> +#define OMAP4_UART3_DR2_DS_MASK (1 << 19)
> +#define OMAP4_UART3_DR3_DS_SHIFT 18
> +#define OMAP4_UART3_DR3_DS_MASK (1 << 18)
> +#define OMAP4_UART3_DR4_DS_SHIFT 17
> +#define OMAP4_UART3_DR4_DS_MASK (1 << 17)
> +#define OMAP4_UART3_DR5_DS_SHIFT 16
> +#define OMAP4_UART3_DR5_DS_MASK (1 << 16)
> +#define OMAP4_USBA0_DR0_DS_SHIFT 15
> +#define OMAP4_USBA0_DR0_DS_MASK (1 << 15)
> +#define OMAP4_USBA0_DR1_DS_SHIFT 14
> +#define OMAP4_USBA0_DR1_DS_MASK (1 << 14)
> +#define OMAP4_USBA_DR2_DS_SHIFT 13
> +#define OMAP4_USBA_DR2_DS_MASK (1 << 13)
> +#define OMAP4_USBB2_DR0_DS_SHIFT 12
> +#define OMAP4_USBB2_DR0_DS_MASK (1 << 12)
> +#define OMAP4_USBB1_DR0_DS_SHIFT 11
> +#define OMAP4_USBB1_DR0_DS_MASK (1 << 11)
> +
> /* CONTROL_USBB_HSIC */
> #define OMAP4_USBB2_DR1_SR_SHIFT 30
> #define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH RESEND 1/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition
@ 2013-04-08 20:56 ` Tony Lindgren
0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2013-04-08 20:56 UTC (permalink / raw)
To: linux-arm-kernel
* Ruslan Bilovol <ruslan.bilovol@ti.com> [130313 17:16]:
> This patch adds missing CONTROL_SMART2IO_PADCONF_2 register
> definition
Sorry for the delay on this one. After looking at these registers,
there's no need to define them here.
These all relate to pinconf, and these all can now be handled by
generic pinconf using pinctrl-single.c. There's generic pinconf
support added to pinctrl-single.c in linux next by Haojian Zhuang.
This means that you can just define these in the .dts file for
the board, and you can select the board specific values for things
like output buffer.
In Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
you should see what all is already supported, and if it's not,
we can patch it in. That's in current linux next queued for
v3.10.
Regards,
Tony
> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
> ---
> arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 45 +++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
> index c88420d..d512ade 100644
> --- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
> +++ b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
> @@ -46,6 +46,7 @@
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
> +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2 0x05cc
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
> #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
> @@ -764,6 +765,50 @@
> #define OMAP4_HSI_DR0_LB_SHIFT 10
> #define OMAP4_HSI_DR0_LB_MASK (1 << 10)
>
> +/* CONTROL_SMART2IO_PADCONF_2 */
> +#define OMAP4_DPM_DR1_DS_SHIFT 31
> +#define OMAP4_DPM_DR1_DS_MASK (1 << 31)
> +#define OMAP4_DPM_DR2_DS_SHIFT 30
> +#define OMAP4_DPM_DR2_DS_MASK (1 << 30)
> +#define OMAP4_DPM_DR3_DS_SHIFT 29
> +#define OMAP4_DPM_DR3_DS_MASK (1 << 29)
> +#define OMAP4_GPIO_DR10_DS_SHIFT 28
> +#define OMAP4_GPIO_DR10_DS_MASK (1 << 28)
> +#define OMAP4_HSI2_DR0_DS_SHIFT 27
> +#define OMAP4_HSI2_DR0_DS_MASK (1 << 27)
> +#define OMAP4_HSI2_DR1_DS_SHIFT 26
> +#define OMAP4_HSI2_DR1_DS_MASK (1 << 26)
> +#define OMAP4_HSI2_DR2_DS_SHIFT 25
> +#define OMAP4_HSI2_DR2_DS_MASK (1 << 25)
> +#define OMAP4_SDMMC3_DR0_DS_SHIFT 24
> +#define OMAP4_SDMMC3_DR0_DS_MASK (1 << 24)
> +#define OMAP4_SDMMC4_DR0_DS_SHIFT 23
> +#define OMAP4_SDMMC4_DR0_DS_MASK (1 << 23)
> +#define OMAP4_SDMMC4_DR1_DS_SHIFT 22
> +#define OMAP4_SDMMC4_DR1_DS_MASK (1 << 22)
> +#define OMAP4_SPI3_DR0_DS_SHIFT 21
> +#define OMAP4_SPI3_DR0_DS_MASK (1 << 21)
> +#define OMAP4_SPI3_DR1_DS_SHIFT 20
> +#define OMAP4_SPI3_DR1_DS_MASK (1 << 20)
> +#define OMAP4_UART3_DR2_DS_SHIFT 19
> +#define OMAP4_UART3_DR2_DS_MASK (1 << 19)
> +#define OMAP4_UART3_DR3_DS_SHIFT 18
> +#define OMAP4_UART3_DR3_DS_MASK (1 << 18)
> +#define OMAP4_UART3_DR4_DS_SHIFT 17
> +#define OMAP4_UART3_DR4_DS_MASK (1 << 17)
> +#define OMAP4_UART3_DR5_DS_SHIFT 16
> +#define OMAP4_UART3_DR5_DS_MASK (1 << 16)
> +#define OMAP4_USBA0_DR0_DS_SHIFT 15
> +#define OMAP4_USBA0_DR0_DS_MASK (1 << 15)
> +#define OMAP4_USBA0_DR1_DS_SHIFT 14
> +#define OMAP4_USBA0_DR1_DS_MASK (1 << 14)
> +#define OMAP4_USBA_DR2_DS_SHIFT 13
> +#define OMAP4_USBA_DR2_DS_MASK (1 << 13)
> +#define OMAP4_USBB2_DR0_DS_SHIFT 12
> +#define OMAP4_USBB2_DR0_DS_MASK (1 << 12)
> +#define OMAP4_USBB1_DR0_DS_SHIFT 11
> +#define OMAP4_USBB1_DR0_DS_MASK (1 << 11)
> +
> /* CONTROL_USBB_HSIC */
> #define OMAP4_USBB2_DR1_SR_SHIFT 30
> #define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-04-08 20:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-14 0:11 [PATCH RESEND 0/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition Ruslan Bilovol
2013-03-14 0:11 ` Ruslan Bilovol
2013-03-14 0:11 ` [PATCH RESEND 1/1] " Ruslan Bilovol
2013-03-14 0:11 ` Ruslan Bilovol
2013-04-08 20:56 ` Tony Lindgren
2013-04-08 20:56 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.