All of lore.kernel.org
 help / color / mirror / Atom feed
From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL
Date: Sun, 14 Apr 2013 00:00:56 -0700	[thread overview]
Message-ID: <20130414070056.6507.87735@quantum> (raw)
In-Reply-To: <51685F60.9010802@gmail.com>

Quoting Sebastian Hesselbarth (2013-04-12 12:24:16)
> On 04/12/2013 08:38 PM, Mike Turquette wrote:
> > Quoting Michal Bachraty (2013-04-09 01:26:15)
> >> For gapless tuning, there is no need for PLL reset and clkout power-down
> >> when tuning output. "silabs,gapless-tuning" parameter enables gapless tuning
> >> for specific clock output.
> >>
> >> Signed-off-by: Michal Bachraty<michal.bachraty@streamunlimited.com>
> >
> > Hi Michal,
> >
> > This did not apply cleanly on the latest (v8) si5351 clk driver.  Can
> > you refresh it?  I do not plan on taking any more patches for 3.10 after
> > 3.9-rc7 drops (likely on Sunday or Monday).  So this patch may need to
> > wait until after the merge window.
> 
> Mike,
> 
> I have integrated the above function into clk-si5351 during development
> (see clk-si5351 changelog from v6->v7). I think we can drop this patch,
> as Michal added his Tested-by to clk-si5351.
> 

Great.

Thanks,
Mike

> Regards,
>    Sebastian

WARNING: multiple messages have this Message-ID (diff)
From: Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Sebastian Hesselbarth
	<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Michal Bachraty
	<michal.bachraty-6oiIBCxl0MMjD8S081q9vkEOCMrvLtNR@public.gmane.org>,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL
Date: Sun, 14 Apr 2013 00:00:56 -0700	[thread overview]
Message-ID: <20130414070056.6507.87735@quantum> (raw)
In-Reply-To: <51685F60.9010802-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Quoting Sebastian Hesselbarth (2013-04-12 12:24:16)
> On 04/12/2013 08:38 PM, Mike Turquette wrote:
> > Quoting Michal Bachraty (2013-04-09 01:26:15)
> >> For gapless tuning, there is no need for PLL reset and clkout power-down
> >> when tuning output. "silabs,gapless-tuning" parameter enables gapless tuning
> >> for specific clock output.
> >>
> >> Signed-off-by: Michal Bachraty<michal.bachraty-6oiIBCxl0MMjD8S081q9vkEOCMrvLtNR@public.gmane.org>
> >
> > Hi Michal,
> >
> > This did not apply cleanly on the latest (v8) si5351 clk driver.  Can
> > you refresh it?  I do not plan on taking any more patches for 3.10 after
> > 3.9-rc7 drops (likely on Sunday or Monday).  So this patch may need to
> > wait until after the merge window.
> 
> Mike,
> 
> I have integrated the above function into clk-si5351 during development
> (see clk-si5351 changelog from v6->v7). I think we can drop this patch,
> as Michal added his Tested-by to clk-si5351.
> 

Great.

Thanks,
Mike

> Regards,
>    Sebastian

  reply	other threads:[~2013-04-14  7:00 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-09  8:26 [PATCH] clk: si5351: Add gapless tuning for SI5351 PLL Michal Bachraty
2013-04-09  8:26 ` Michal Bachraty
2013-04-09  8:26 ` Michal Bachraty
2013-04-09  9:25 ` Sebastian Hesselbarth
2013-04-09  9:25   ` Sebastian Hesselbarth
2013-04-09  9:25   ` Sebastian Hesselbarth
2013-04-09 13:49   ` Michal Bachraty
2013-04-09 13:49     ` Michal Bachraty
2013-04-09 13:49     ` Michal Bachraty
2013-04-12 18:38 ` Mike Turquette
2013-04-12 18:38   ` Mike Turquette
2013-04-12 18:38   ` Mike Turquette
2013-04-12 19:24   ` Sebastian Hesselbarth
2013-04-12 19:24     ` Sebastian Hesselbarth
2013-04-14  7:00     ` Mike Turquette [this message]
2013-04-14  7:00       ` Mike Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130414070056.6507.87735@quantum \
    --to=mturquette@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.