[PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Andy Shevchenko]

There is a patch series which introduces ACPI DMA helpers in similar way like
we have for DeviceTree.

In addition it applies this to the first user, namely dw_dmac driver.

Since v1:
 - address one Vinod's comment
 - replace 5/6 & 6/6 by 5/5 from Rafael
 - tested on Intel Lynxpoint system

Andy Shevchenko (4):
  dma: acpi-dma: introduce ACPI DMA helpers
  dmaengine: call acpi_dma_request_slave_channel as well
  dma: acpi-dma: parse CSRT to extract additional resources
  dw_dmac: add ACPI support

Rafael J. Wysocki (1):
  ACPI / LPSS: add support of shared clock

 Documentation/acpi/enumeration.txt     |  77 ++++++
 drivers/acpi/Makefile                  |   1 -
 drivers/acpi/acpi_lpss.c               |  26 +-
 drivers/acpi/csrt.c                    | 159 ------------
 drivers/acpi/internal.h                |   1 -
 drivers/acpi/scan.c                    |   1 -
 drivers/clk/x86/clk-lpt.c              |  15 +-
 drivers/dma/Kconfig                    |   4 +
 drivers/dma/Makefile                   |   1 +
 drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
 drivers/dma/dmaengine.c                |   6 +
 drivers/dma/dw_dmac.c                  |  68 +++--
 drivers/dma/dw_dmac_regs.h             |   1 -
 include/linux/acpi_dma.h               | 120 +++++++++
 include/linux/platform_data/clk-lpss.h |   5 +
 15 files changed, 741 insertions(+), 189 deletions(-)
 delete mode 100644 drivers/acpi/csrt.c
 create mode 100644 drivers/dma/acpi-dma.c
 create mode 100644 include/linux/acpi_dma.h

-- 
1.8.2.rc0.22.gb3600c3

[PATCH v2 1/5] dma: acpi-dma: introduce ACPI DMA helpers

[Andy Shevchenko]

There is a new generic API to get a DMA channel for a slave device (commit
9a6cecc8 "dmaengine: add helper function to request a slave DMA channel"). In
similar fashion to the DT case (commit aa3da644 "of: Add generic device tree
DMA helpers") we introduce helpers to the DMAC drivers which are enumerated by
ACPI.

The proposed extension provides the following API calls:
	acpi_dma_controller_register(), devm_acpi_dma_controller_register()
	acpi_dma_controller_free(), devm_acpi_dma_controller_free()
	acpi_dma_simple_xlate()
	acpi_dma_request_slave_chan_by_index()
	acpi_dma_request_slave_chan_by_name()

The first two should be used, for example, at probe() and remove() of the
corresponding DMAC driver. At the register stage the DMAC driver supplies a
custom xlate() function to translate a struct dma_spec into struct dma_chan.

Accordingly to the ACPI Fixed DMA resource specification the only two pieces of
information the slave device has are the channel id and the request line (slave
id). Those two are represented by struct dma_spec. The
acpi_dma_request_slave_chan_by_index() provides access to the specifix FixedDMA
resource by its index. Whereas dma_request_slave_channel() takes a string
parameter to identify the DMA resources required by the slave device. To make a
slave device driver work with both DeviceTree and ACPI enumeration a simple
convention is established: "tx" corresponds to the index 0 and "rx" to the
index 1. In case of robust configuration the slave device driver unfortunately
needs to call acpi_dma_request_slave_chan_by_index() directly.

Additionally the patch provides "managed" version of the register/free pair
i.e. devm_acpi_dma_controller_register() and devm_acpi_dma_controller_free().
Usually, the driver uses only devm_acpi_dma_controller_register().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 Documentation/acpi/enumeration.txt |  77 ++++++++++
 drivers/dma/Kconfig                |   4 +
 drivers/dma/Makefile               |   1 +
 drivers/dma/acpi-dma.c             | 279 +++++++++++++++++++++++++++++++++++++
 include/linux/acpi_dma.h           | 116 +++++++++++++++
 5 files changed, 477 insertions(+)
 create mode 100644 drivers/dma/acpi-dma.c
 create mode 100644 include/linux/acpi_dma.h

diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 94a6561..2874c90 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -66,6 +66,83 @@ the ACPI device explicitly to acpi_platform_device_ids list defined in
 drivers/acpi/acpi_platform.c. This limitation is only for the platform
 devices, SPI and I2C devices are created automatically as described below.
 
+DMA support
+~~~~~~~~~~~
+DMA controllers enumerated via ACPI should be registered in the system to
+provide generic access to their resources. For example, a driver that would
+like to be accessible to slave devices via generic API call
+dma_request_slave_channel() must register itself at the end of the probe
+function like this:
+
+	err = devm_acpi_dma_controller_register(dev, xlate_func, dw);
+	/* Handle the error if it's not a case of !CONFIG_ACPI */
+
+and implement custom xlate function if needed (usually acpi_dma_simple_xlate()
+is enough) which converts the FixedDMA resource provided by struct
+acpi_dma_spec into the corresponding DMA channel. A piece of code for that case
+could look like:
+
+	#ifdef CONFIG_ACPI
+	struct filter_args {
+		/* Provide necessary information for the filter_func */
+		...
+	};
+
+	static bool filter_func(struct dma_chan *chan, void *param)
+	{
+		/* Choose the proper channel */
+		...
+	}
+
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		dma_cap_mask_t cap;
+		struct filter_args args;
+
+		/* Prepare arguments for filter_func */
+		...
+		return dma_request_channel(cap, filter_func, &args);
+	}
+	#else
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		return NULL;
+	}
+	#endif
+
+dma_request_slave_channel() will call xlate_func() for each registered DMA
+controller. In the xlate function the proper channel must be chosen based on
+information in struct acpi_dma_spec and the properties of the controller
+provided by struct acpi_dma.
+
+Clients must call dma_request_slave_channel() with the string parameter that
+corresponds to a specific FixedDMA resource. By default "tx" means the first
+entry of the FixedDMA resource array, "rx" means the second entry. The table
+below shows a layout:
+
+	Device (I2C0)
+	{
+		...
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (DBUF, ResourceTemplate ()
+			{
+				FixedDMA (0x0018, 0x0004, Width32bit, _Y48)
+				FixedDMA (0x0019, 0x0005, Width32bit, )
+			})
+		...
+		}
+	}
+
+So, the FixedDMA with request line 0x0018 is "tx" and next one is "rx" in
+this example.
+
+In robust cases the client unfortunately needs to call
+acpi_dma_request_slave_chan_by_index() directly and therefore choose the
+specific FixedDMA resource by its index.
+
 SPI serial bus support
 ~~~~~~~~~~~~~~~~~~~~~~
 Slave devices behind SPI bus have SpiSerialBus resource attached to them.
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index aeaea32..2ad5ed9 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -328,6 +328,10 @@ config DMA_ENGINE
 config DMA_VIRTUAL_CHANNELS
 	tristate
 
+config DMA_ACPI
+	def_bool y
+	depends on ACPI
+
 config DMA_OF
 	def_bool y
 	depends on OF
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 488e3ff..268e626 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -3,6 +3,7 @@ ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
 
 obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
 obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
+obj-$(CONFIG_DMA_ACPI) += acpi-dma.o
 obj-$(CONFIG_DMA_OF) += of-dma.o
 
 obj-$(CONFIG_NET_DMA) += iovlock.o
diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c
new file mode 100644
index 0000000..ba6fc62
--- /dev/null
+++ b/drivers/dma/acpi-dma.c
@@ -0,0 +1,279 @@
+/*
+ * ACPI helpers for DMA request / controller
+ *
+ * Based on of-dma.c
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/acpi_dma.h>
+
+static LIST_HEAD(acpi_dma_list);
+static DEFINE_MUTEX(acpi_dma_lock);
+
+/**
+ * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers
+ * @dev:		struct device of DMA controller
+ * @acpi_dma_xlate:	translation function which converts a dma specifier
+ *			into a dma_chan structure
+ * @data		pointer to controller specific data to be used by
+ *			translation function
+ *
+ * Returns 0 on success or appropriate errno value on error.
+ *
+ * Allocated memory should be freed with appropriate acpi_dma_controller_free()
+ * call.
+ */
+int acpi_dma_controller_register(struct device *dev,
+		struct dma_chan *(*acpi_dma_xlate)
+		(struct acpi_dma_spec *, struct acpi_dma *),
+		void *data)
+{
+	struct acpi_device *adev;
+	struct acpi_dma	*adma;
+
+	if (!dev || !acpi_dma_xlate)
+		return -EINVAL;
+
+	/* Check if the device was enumerated by ACPI */
+	if (!ACPI_HANDLE(dev))
+		return -EINVAL;
+
+	if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev))
+		return -EINVAL;
+
+	adma = kzalloc(sizeof(*adma), GFP_KERNEL);
+	if (!adma)
+		return -ENOMEM;
+
+	adma->dev = dev;
+	adma->acpi_dma_xlate = acpi_dma_xlate;
+	adma->data = data;
+
+	/* Now queue acpi_dma controller structure in list */
+	mutex_lock(&acpi_dma_lock);
+	list_add_tail(&adma->dma_controllers, &acpi_dma_list);
+	mutex_unlock(&acpi_dma_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dma_controller_register);
+
+/**
+ * acpi_dma_controller_free - Remove a DMA controller from ACPI DMA helpers list
+ * @dev:	struct device of DMA controller
+ *
+ * Memory allocated by acpi_dma_controller_register() is freed here.
+ */
+int acpi_dma_controller_free(struct device *dev)
+{
+	struct acpi_dma *adma;
+
+	if (!dev)
+		return -EINVAL;
+
+	mutex_lock(&acpi_dma_lock);
+
+	list_for_each_entry(adma, &acpi_dma_list, dma_controllers)
+		if (adma->dev == dev) {
+			list_del(&adma->dma_controllers);
+			mutex_unlock(&acpi_dma_lock);
+			kfree(adma);
+			return 0;
+		}
+
+	mutex_unlock(&acpi_dma_lock);
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(acpi_dma_controller_free);
+
+static void devm_acpi_dma_release(struct device *dev, void *res)
+{
+	acpi_dma_controller_free(dev);
+}
+
+/**
+ * devm_acpi_dma_controller_register - resource managed acpi_dma_controller_register()
+ * @dev:		device that is registering this DMA controller
+ * @acpi_dma_xlate:	translation function
+ * @data		pointer to controller specific data
+ *
+ * Managed acpi_dma_controller_register(). DMA controller registered by this
+ * function are automatically freed on driver detach. See
+ * acpi_dma_controller_register() for more information.
+ */
+int devm_acpi_dma_controller_register(struct device *dev,
+		struct dma_chan *(*acpi_dma_xlate)
+		(struct acpi_dma_spec *, struct acpi_dma *),
+		void *data)
+{
+	void *res;
+	int ret;
+
+	res = devres_alloc(devm_acpi_dma_release, 0, GFP_KERNEL);
+	if (!res)
+		return -ENOMEM;
+
+	ret = acpi_dma_controller_register(dev, acpi_dma_xlate, data);
+	if (ret) {
+		devres_free(res);
+		return ret;
+	}
+	devres_add(dev, res);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_register);
+
+/**
+ * devm_acpi_dma_controller_free - resource managed acpi_dma_controller_free()
+ *
+ * Unregister a DMA controller registered with
+ * devm_acpi_dma_controller_register(). Normally this function will not need to
+ * be called and the resource management code will ensure that the resource is
+ * freed.
+ */
+void devm_acpi_dma_controller_free(struct device *dev)
+{
+	WARN_ON(devres_destroy(dev, devm_acpi_dma_release, NULL, NULL));
+}
+EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
+
+struct acpi_dma_parser_data {
+	struct acpi_dma_spec dma_spec;
+	size_t index;
+	size_t n;
+};
+
+/**
+ * acpi_dma_parse_fixed_dma - Parse FixedDMA ACPI resources to a DMA specifier
+ * @res:	struct acpi_resource to get FixedDMA resources from
+ * @data:	pointer to a helper struct acpi_dma_parser_data
+ */
+static int acpi_dma_parse_fixed_dma(struct acpi_resource *res, void *data)
+{
+	struct acpi_dma_parser_data *pdata = data;
+
+	if (res->type == ACPI_RESOURCE_TYPE_FIXED_DMA) {
+		struct acpi_resource_fixed_dma *dma = &res->data.fixed_dma;
+
+		if (pdata->n++ == pdata->index) {
+			pdata->dma_spec.chan_id = dma->channels;
+			pdata->dma_spec.slave_id = dma->request_lines;
+		}
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+/**
+ * acpi_dma_request_slave_chan_by_index - Get the DMA slave channel
+ * @dev:	struct device to get DMA request from
+ * @index:	index of FixedDMA descriptor for @dev
+ *
+ * Returns pointer to appropriate dma channel on success or NULL on error.
+ */
+struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev,
+		size_t index)
+{
+	struct acpi_dma_parser_data pdata;
+	struct acpi_dma_spec *dma_spec = &pdata.dma_spec;
+	struct list_head resource_list;
+	struct acpi_device *adev;
+	struct acpi_dma *adma;
+	struct dma_chan *chan = NULL;
+
+	/* Check if the device was enumerated by ACPI */
+	if (!dev || !ACPI_HANDLE(dev))
+		return NULL;
+
+	if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev))
+		return NULL;
+
+	memset(&pdata, 0, sizeof(pdata));
+	pdata.index = index;
+
+	/* Initial values for the request line and channel */
+	dma_spec->chan_id = -1;
+	dma_spec->slave_id = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	acpi_dev_get_resources(adev, &resource_list,
+			acpi_dma_parse_fixed_dma, &pdata);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (dma_spec->slave_id < 0 || dma_spec->chan_id < 0)
+		return NULL;
+
+	mutex_lock(&acpi_dma_lock);
+
+	list_for_each_entry(adma, &acpi_dma_list, dma_controllers) {
+		dma_spec->dev = adma->dev;
+		chan = adma->acpi_dma_xlate(dma_spec, adma);
+		if (chan)
+			break;
+	}
+
+	mutex_unlock(&acpi_dma_lock);
+	return chan;
+}
+EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_index);
+
+/**
+ * acpi_dma_request_slave_chan_by_name - Get the DMA slave channel
+ * @dev:	struct device to get DMA request from
+ * @name:	represents corresponding FixedDMA descriptor for @dev
+ *
+ * In order to support both Device Tree and ACPI in a single driver we
+ * translate the names "tx" and "rx" here based on the most common case where
+ * the first FixedDMA descriptor is TX and second is RX.
+ *
+ * Returns pointer to appropriate dma channel on success or NULL on error.
+ */
+struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev,
+		const char *name)
+{
+	size_t index;
+
+	if (!strcmp(name, "tx"))
+		index = 0;
+	else if (!strcmp(name, "rx"))
+		index = 1;
+	else
+		return NULL;
+
+	return acpi_dma_request_slave_chan_by_index(dev, index);
+}
+EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_name);
+
+/**
+ * acpi_dma_simple_xlate - Simple ACPI DMA engine translation helper
+ * @dma_spec: pointer to ACPI DMA specifier
+ * @adma: pointer to ACPI DMA controller data
+ *
+ * A simple translation function for ACPI based devices. Passes &struct
+ * dma_spec to the DMA controller driver provided filter function. Returns
+ * pointer to the channel if found or %NULL otherwise.
+ */
+struct dma_chan *acpi_dma_simple_xlate(struct acpi_dma_spec *dma_spec,
+		struct acpi_dma *adma)
+{
+	struct acpi_dma_filter_info *info = adma->data;
+
+	if (!info || !info->filter_fn)
+		return NULL;
+
+	return dma_request_channel(info->dma_cap, info->filter_fn, dma_spec);
+}
+EXPORT_SYMBOL_GPL(acpi_dma_simple_xlate);
diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h
new file mode 100644
index 0000000..d09deab
--- /dev/null
+++ b/include/linux/acpi_dma.h
@@ -0,0 +1,116 @@
+/*
+ * ACPI helpers for DMA request / controller
+ *
+ * Based on of_dma.h
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_ACPI_DMA_H
+#define __LINUX_ACPI_DMA_H
+
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+/**
+ * struct acpi_dma_spec - slave device DMA resources
+ * @chan_id:	channel unique id
+ * @slave_id:	request line unique id
+ * @dev:	struct device of the DMA controller to be used in the filter
+ *		function
+ */
+struct acpi_dma_spec {
+	int		chan_id;
+	int		slave_id;
+	struct device	*dev;
+};
+
+/**
+ * struct acpi_dma - representation of the registered DMAC
+ * @dma_controllers:	linked list node
+ * @dev:		struct device of this controller
+ * @acpi_dma_xlate:	callback function to find a suitable channel
+ * @data:		private data used by a callback function
+ */
+struct acpi_dma {
+	struct list_head	dma_controllers;
+	struct device		*dev;
+	struct dma_chan		*(*acpi_dma_xlate)
+				(struct acpi_dma_spec *, struct acpi_dma *);
+	void			*data;
+};
+
+/* Used with acpi_dma_simple_xlate() */
+struct acpi_dma_filter_info {
+	dma_cap_mask_t	dma_cap;
+	dma_filter_fn	filter_fn;
+};
+
+#ifdef CONFIG_DMA_ACPI
+
+int acpi_dma_controller_register(struct device *dev,
+		struct dma_chan *(*acpi_dma_xlate)
+		(struct acpi_dma_spec *, struct acpi_dma *),
+		void *data);
+int acpi_dma_controller_free(struct device *dev);
+int devm_acpi_dma_controller_register(struct device *dev,
+		struct dma_chan *(*acpi_dma_xlate)
+		(struct acpi_dma_spec *, struct acpi_dma *),
+		void *data);
+void devm_acpi_dma_controller_free(struct device *dev);
+
+struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev,
+						      size_t index);
+struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev,
+						     const char *name);
+
+struct dma_chan *acpi_dma_simple_xlate(struct acpi_dma_spec *dma_spec,
+				       struct acpi_dma *adma);
+#else
+
+static inline int acpi_dma_controller_register(struct device *dev,
+		struct dma_chan *(*acpi_dma_xlate)
+		(struct acpi_dma_spec *, struct acpi_dma *),
+		void *data)
+{
+	return -ENODEV;
+}
+static inline int acpi_dma_controller_free(struct device *dev)
+{
+	return -ENODEV;
+}
+static inline int devm_acpi_dma_controller_register(struct device *dev,
+		struct dma_chan *(*acpi_dma_xlate)
+		(struct acpi_dma_spec *, struct acpi_dma *),
+		void *data)
+{
+	return -ENODEV;
+}
+static inline void devm_acpi_dma_controller_free(struct device *dev)
+{
+}
+
+static inline struct dma_chan *acpi_dma_request_slave_chan_by_index(
+		struct device *dev, size_t index)
+{
+	return NULL;
+}
+static inline struct dma_chan *acpi_dma_request_slave_chan_by_name(
+		struct device *dev, const char *name)
+{
+	return NULL;
+}
+
+#define acpi_dma_simple_xlate	NULL
+
+#endif
+
+#define acpi_dma_request_slave_channel	acpi_dma_request_slave_chan_by_index
+
+#endif /* __LINUX_ACPI_DMA_H */
-- 
1.8.2.rc0.22.gb3600c3

[PATCH v2 2/5] dmaengine: call acpi_dma_request_slave_channel as well

[Andy Shevchenko]

The slave device could be enumerated by ACPI. In that case the
dma_request_slave_channel should use the acpi_dma_request_slave_channel()
helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/dma/dmaengine.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index c121b03..93f7992 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -62,6 +62,8 @@
 #include <linux/rculist.h>
 #include <linux/idr.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/acpi_dma.h>
 #include <linux/of_dma.h>
 
 static DEFINE_MUTEX(dma_list_mutex);
@@ -564,6 +566,10 @@ struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name)
 	if (dev->of_node)
 		return of_dma_request_slave_channel(dev->of_node, name);
 
+	/* If device was enumerated by ACPI get slave info from here */
+	if (ACPI_HANDLE(dev))
+		return acpi_dma_request_slave_chan_by_name(dev, name);
+
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(dma_request_slave_channel);
-- 
1.8.2.rc0.22.gb3600c3

[PATCH v2 3/5] dma: acpi-dma: parse CSRT to extract additional resources

[Andy Shevchenko]

Since we have CSRT only to get additional DMA controller resources, let's get
rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/acpi/Makefile    |   1 -
 drivers/acpi/csrt.c      | 159 -------------------------------------------
 drivers/acpi/internal.h  |   1 -
 drivers/acpi/scan.c      |   1 -
 drivers/dma/acpi-dma.c   | 172 ++++++++++++++++++++++++++++++++++++++++++++++-
 include/linux/acpi_dma.h |   4 ++
 6 files changed, 173 insertions(+), 165 deletions(-)
 delete mode 100644 drivers/acpi/csrt.c

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index ecb743b..6050c80 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -38,7 +38,6 @@ acpi-y				+= processor_core.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o
-acpi-y				+= csrt.o
 acpi-$(CONFIG_X86_INTEL_LPSS)	+= acpi_lpss.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= power.o
diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c
deleted file mode 100644
index 5c15a91..0000000
--- a/drivers/acpi/csrt.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Support for Core System Resources Table (CSRT)
- *
- * Copyright (C) 2013, Intel Corporation
- * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
- *	    Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "ACPI: CSRT: " fmt
-
-#include <linux/acpi.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-ACPI_MODULE_NAME("CSRT");
-
-static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev,
-					      const struct acpi_csrt_group *grp)
-{
-	const struct acpi_csrt_shared_info *si;
-	struct resource res[3];
-	size_t nres;
-	int ret;
-
-	memset(res, 0, sizeof(res));
-	nres = 0;
-
-	si = (const struct acpi_csrt_shared_info *)&grp[1];
-	/*
-	 * The peripherals that are listed on CSRT typically support only
-	 * 32-bit addresses so we only use the low part of MMIO base for
-	 * now.
-	 */
-	if (!si->mmio_base_high && si->mmio_base_low) {
-		/*
-		 * There is no size of the memory resource in shared_info
-		 * so we assume that it is 4k here.
-		 */
-		res[nres].start = si->mmio_base_low;
-		res[nres].end = res[0].start + SZ_4K - 1;
-		res[nres++].flags = IORESOURCE_MEM;
-	}
-
-	if (si->gsi_interrupt) {
-		int irq = acpi_register_gsi(NULL, si->gsi_interrupt,
-					    si->interrupt_mode,
-					    si->interrupt_polarity);
-		res[nres].start = irq;
-		res[nres].end = irq;
-		res[nres++].flags = IORESOURCE_IRQ;
-	}
-
-	if (si->base_request_line || si->num_handshake_signals) {
-		/*
-		 * We pass the driver a DMA resource describing the range
-		 * of request lines the device supports.
-		 */
-		res[nres].start = si->base_request_line;
-		res[nres].end = res[nres].start + si->num_handshake_signals - 1;
-		res[nres++].flags = IORESOURCE_DMA;
-	}
-
-	ret = platform_device_add_resources(pdev, res, nres);
-	if (ret) {
-		if (si->gsi_interrupt)
-			acpi_unregister_gsi(si->gsi_interrupt);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int __init
-acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp)
-{
-	struct platform_device *pdev;
-	char vendor[5], name[16];
-	int ret, i;
-
-	vendor[0] = grp->vendor_id;
-	vendor[1] = grp->vendor_id >> 8;
-	vendor[2] = grp->vendor_id >> 16;
-	vendor[3] = grp->vendor_id >> 24;
-	vendor[4] = '\0';
-
-	if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
-		return -ENODEV;
-
-	snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id);
-	pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO);
-	if (!pdev)
-		return -ENOMEM;
-
-	/* Add resources based on the shared info */
-	ret = acpi_csrt_parse_shared_info(pdev, grp);
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
-
-	for (i = 0; i < pdev->num_resources; i++)
-		dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]);
-
-	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
-}
-
-/*
- * CSRT or Core System Resources Table is a proprietary ACPI table
- * introduced by Microsoft. This table can contain devices that are not in
- * the system DSDT table. In particular DMA controllers might be described
- * here.
- *
- * We present these devices as normal platform devices that don't have ACPI
- * IDs or handle. The platform device name will be something like
- * <VENDOR><DEVID>.<n>.auto for example: INTL9C06.0.auto.
- */
-void __init acpi_csrt_init(void)
-{
-	struct acpi_csrt_group *grp, *end;
-	struct acpi_table_csrt *csrt;
-	acpi_status status;
-	int ret;
-
-	status = acpi_get_table(ACPI_SIG_CSRT, 0,
-				(struct acpi_table_header **)&csrt);
-	if (ACPI_FAILURE(status)) {
-		if (status != AE_NOT_FOUND)
-			pr_warn("failed to get the CSRT table\n");
-		return;
-	}
-
-	pr_debug("parsing CSRT table for devices\n");
-
-	grp = (struct acpi_csrt_group *)(csrt + 1);
-	end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
-
-	while (grp < end) {
-		ret = acpi_csrt_parse_resource_group(grp);
-		if (ret) {
-			pr_warn("error in parsing resource group: %d\n", ret);
-			return;
-		}
-
-		grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
-	}
-}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 6f1afd9..297cbf4 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -35,7 +35,6 @@ void acpi_pci_link_init(void);
 void acpi_pci_root_hp_init(void);
 void acpi_platform_init(void);
 int acpi_sysfs_init(void);
-void acpi_csrt_init(void);
 #ifdef CONFIG_ACPI_CONTAINER
 void acpi_container_init(void);
 #else
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index d7f3c8b..6742aa1 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -2042,7 +2042,6 @@ int __init acpi_scan_init(void)
 	acpi_pci_link_init();
 	acpi_platform_init();
 	acpi_lpss_init();
-	acpi_csrt_init();
 	acpi_container_init();
 	acpi_pci_slot_init();
 	acpi_memory_hotplug_init();
diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c
index ba6fc62..5a18f82 100644
--- a/drivers/dma/acpi-dma.c
+++ b/drivers/dma/acpi-dma.c
@@ -4,7 +4,8 @@
  * Based on of-dma.c
  *
  * Copyright (C) 2013, Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *	    Mika Westerberg <mika.westerberg@linux.intel.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
+#include <linux/ioport.h>
 #include <linux/acpi.h>
 #include <linux/acpi_dma.h>
 
@@ -23,6 +25,117 @@ static LIST_HEAD(acpi_dma_list);
 static DEFINE_MUTEX(acpi_dma_lock);
 
 /**
+ * acpi_dma_parse_resource_group - match device and parse resource group
+ * @grp:	CSRT resource group
+ * @adev:	ACPI device to match with
+ * @adma:	struct acpi_dma of the given DMA controller
+ *
+ * Returns 1 on success, 0 when no information is available, or appropriate
+ * errno value on error.
+ *
+ * In order to match a device from DSDT table to the corresponding CSRT device
+ * we use MMIO address and IRQ.
+ */
+static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
+		struct acpi_device *adev, struct acpi_dma *adma)
+{
+	const struct acpi_csrt_shared_info *si;
+	struct list_head resource_list;
+	struct resource_list_entry *rentry;
+	resource_size_t mem = 0, irq = 0;
+	u32 vendor_id;
+	int ret;
+
+	if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
+		return -ENODEV;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (ret <= 0)
+		return 0;
+
+	list_for_each_entry(rentry, &resource_list, node) {
+		if (resource_type(&rentry->res) == IORESOURCE_MEM)
+			mem = rentry->res.start;
+		else if (resource_type(&rentry->res) == IORESOURCE_IRQ)
+			irq = rentry->res.start;
+	}
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	/* Consider initial zero values as resource not found */
+	if (mem == 0 && irq == 0)
+		return 0;
+
+	si = (const struct acpi_csrt_shared_info *)&grp[1];
+
+	/* Match device by MMIO and IRQ */
+	if (si->mmio_base_low != mem || si->gsi_interrupt != irq)
+		return 0;
+
+	vendor_id = le32_to_cpu(grp->vendor_id);
+	dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",
+		(char *)&vendor_id, grp->device_id, grp->revision);
+
+	/* Check if the request line range is available */
+	if (si->base_request_line == 0 && si->num_handshake_signals == 0)
+		return 0;
+
+	adma->base_request_line = si->base_request_line;
+	adma->end_request_line = si->base_request_line +
+				 si->num_handshake_signals - 1;
+
+	dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n",
+		adma->base_request_line, adma->end_request_line);
+
+	return 1;
+}
+
+/**
+ * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources
+ * @adev:	ACPI device to match with
+ * @adma:	struct acpi_dma of the given DMA controller
+ *
+ * CSRT or Core System Resources Table is a proprietary ACPI table
+ * introduced by Microsoft. This table can contain devices that are not in
+ * the system DSDT table. In particular DMA controllers might be described
+ * here.
+ *
+ * We are using this table to get the request line range of the specific DMA
+ * controller to be used later.
+ *
+ */
+static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma)
+{
+	struct acpi_csrt_group *grp, *end;
+	struct acpi_table_csrt *csrt;
+	acpi_status status;
+	int ret;
+
+	status = acpi_get_table(ACPI_SIG_CSRT, 0,
+				(struct acpi_table_header **)&csrt);
+	if (ACPI_FAILURE(status)) {
+		if (status != AE_NOT_FOUND)
+			dev_warn(&adev->dev, "failed to get the CSRT table\n");
+		return;
+	}
+
+	grp = (struct acpi_csrt_group *)(csrt + 1);
+	end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
+
+	while (grp < end) {
+		ret = acpi_dma_parse_resource_group(grp, adev, adma);
+		if (ret < 0) {
+			dev_warn(&adev->dev,
+				 "error in parsing resource group\n");
+			return;
+		}
+
+		grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
+	}
+}
+
+/**
  * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers
  * @dev:		struct device of DMA controller
  * @acpi_dma_xlate:	translation function which converts a dma specifier
@@ -61,6 +174,8 @@ int acpi_dma_controller_register(struct device *dev,
 	adma->acpi_dma_xlate = acpi_dma_xlate;
 	adma->data = data;
 
+	acpi_dma_parse_csrt(adev, adma);
+
 	/* Now queue acpi_dma controller structure in list */
 	mutex_lock(&acpi_dma_lock);
 	list_add_tail(&adma->dma_controllers, &acpi_dma_list);
@@ -149,6 +264,45 @@ void devm_acpi_dma_controller_free(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
 
+/**
+ * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function
+ * @adma:	struct acpi_dma of DMA controller
+ * @dma_spec:	dma specifier to update
+ *
+ * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise.
+ *
+ * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource
+ * Descriptor":
+ *	DMA Request Line bits is a platform-relative number uniquely
+ *	identifying the request line assigned. Request line-to-Controller
+ *	mapping is done in a controller-specific OS driver.
+ * That's why we can safely adjust slave_id when the appropriate controller is
+ * found.
+ */
+static int acpi_dma_update_dma_spec(struct acpi_dma *adma,
+		struct acpi_dma_spec *dma_spec)
+{
+	/* Set link to the DMA controller device */
+	dma_spec->dev = adma->dev;
+
+	/* Check if the request line range is available */
+	if (adma->base_request_line == 0 && adma->end_request_line == 0)
+		return 0;
+
+	/* Check if slave_id falls to the range */
+	if (dma_spec->slave_id < adma->base_request_line ||
+	    dma_spec->slave_id > adma->end_request_line)
+		return -1;
+
+	/*
+	 * Here we adjust slave_id. It should be a relative number to the base
+	 * request line.
+	 */
+	dma_spec->slave_id -= adma->base_request_line;
+
+	return 1;
+}
+
 struct acpi_dma_parser_data {
 	struct acpi_dma_spec dma_spec;
 	size_t index;
@@ -193,6 +347,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev,
 	struct acpi_device *adev;
 	struct acpi_dma *adma;
 	struct dma_chan *chan = NULL;
+	int found;
 
 	/* Check if the device was enumerated by ACPI */
 	if (!dev || !ACPI_HANDLE(dev))
@@ -219,9 +374,20 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev,
 	mutex_lock(&acpi_dma_lock);
 
 	list_for_each_entry(adma, &acpi_dma_list, dma_controllers) {
-		dma_spec->dev = adma->dev;
+		/*
+		 * We are not going to call translation function if slave_id
+		 * doesn't fall to the request range.
+		 */
+		found = acpi_dma_update_dma_spec(adma, dma_spec);
+		if (found < 0)
+			continue;
 		chan = adma->acpi_dma_xlate(dma_spec, adma);
-		if (chan)
+		/*
+		 * Try to get a channel only from the DMA controller that
+		 * matches the slave_id. See acpi_dma_update_dma_spec()
+		 * description for the details.
+		 */
+		if (found > 0 || chan)
 			break;
 	}
 
diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h
index d09deab..fb02980 100644
--- a/include/linux/acpi_dma.h
+++ b/include/linux/acpi_dma.h
@@ -37,6 +37,8 @@ struct acpi_dma_spec {
  * @dev:		struct device of this controller
  * @acpi_dma_xlate:	callback function to find a suitable channel
  * @data:		private data used by a callback function
+ * @base_request_line:	first supported request line (CSRT)
+ * @end_request_line:	last supported request line (CSRT)
  */
 struct acpi_dma {
 	struct list_head	dma_controllers;
@@ -44,6 +46,8 @@ struct acpi_dma {
 	struct dma_chan		*(*acpi_dma_xlate)
 				(struct acpi_dma_spec *, struct acpi_dma *);
 	void			*data;
+	unsigned short		base_request_line;
+	unsigned short		end_request_line;
 };
 
 /* Used with acpi_dma_simple_xlate() */
-- 
1.8.2.rc0.22.gb3600c3

[PATCH v2 4/5] dw_dmac: add ACPI support

[Andy Shevchenko]

Since we have proper ACPI DMA helpers implemented, the driver may use it. This
patch introduces custom filter function together with acpi_device_id table.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/dma/dw_dmac.c      | 68 ++++++++++++++++++++++++++++++++++------------
 drivers/dma/dw_dmac_regs.h |  1 -
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index e33dc3b..2e5deaa 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -25,6 +25,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/acpi_dma.h>
 
 #include "dw_dmac_regs.h"
 #include "dmaengine.h"
@@ -983,13 +985,6 @@ static inline void convert_burst(u32 *maxburst)
 		*maxburst = 0;
 }
 
-static inline void convert_slave_id(struct dw_dma_chan *dwc)
-{
-	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-
-	dwc->dma_sconfig.slave_id -= dw->request_line_base;
-}
-
 static int
 set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
 {
@@ -1008,7 +1003,6 @@ set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
 
 	convert_burst(&dwc->dma_sconfig.src_maxburst);
 	convert_burst(&dwc->dma_sconfig.dst_maxburst);
-	convert_slave_id(dwc);
 
 	return 0;
 }
@@ -1284,6 +1278,46 @@ static struct dma_chan *dw_dma_of_xlate(struct of_phandle_args *dma_spec,
 	return dma_request_channel(cap, dw_dma_of_filter, &fargs);
 }
 
+#ifdef CONFIG_ACPI
+static bool dw_dma_acpi_filter(struct dma_chan *chan, void *param)
+{
+	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
+	struct acpi_dma_spec *dma_spec = param;
+
+	if (chan->device->dev != dma_spec->dev ||
+	    chan->chan_id != dma_spec->chan_id)
+		return false;
+
+	dwc->request_line = dma_spec->slave_id;
+	dwc->src_master = dwc_get_sms(NULL);
+	dwc->dst_master = dwc_get_dms(NULL);
+
+	return true;
+}
+
+static void dw_dma_acpi_controller_register(struct dw_dma *dw)
+{
+	struct device *dev = dw->dma.dev;
+	struct acpi_dma_filter_info *info;
+	int ret;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return;
+
+	dma_cap_zero(info->dma_cap);
+	dma_cap_set(DMA_SLAVE, info->dma_cap);
+	info->filter_fn = dw_dma_acpi_filter;
+
+	ret = devm_acpi_dma_controller_register(dev, acpi_dma_simple_xlate,
+						info);
+	if (ret)
+		dev_err(dev, "could not register acpi_dma_controller\n");
+}
+#else /* !CONFIG_ACPI */
+static inline void dw_dma_acpi_controller_register(struct dw_dma *dw) {}
+#endif /* !CONFIG_ACPI */
+
 /* --------------------- Cyclic DMA API extensions -------------------- */
 
 /**
@@ -1620,7 +1654,6 @@ dw_dma_parse_dt(struct platform_device *pdev)
 
 static int dw_probe(struct platform_device *pdev)
 {
-	const struct platform_device_id *match;
 	struct dw_dma_platform_data *pdata;
 	struct resource		*io;
 	struct dw_dma		*dw;
@@ -1704,11 +1737,6 @@ static int dw_probe(struct platform_device *pdev)
 		memcpy(dw->data_width, pdata->data_width, 4);
 	}
 
-	/* Get the base request line if set */
-	match = platform_get_device_id(pdev);
-	if (match)
-		dw->request_line_base = (unsigned int)match->driver_data;
-
 	/* Calculate all channel mask before DMA setup */
 	dw->all_chan_mask = (1 << nr_channels) - 1;
 
@@ -1833,6 +1861,9 @@ static int dw_probe(struct platform_device *pdev)
 				"could not register of_dma_controller\n");
 	}
 
+	if (ACPI_HANDLE(&pdev->dev))
+		dw_dma_acpi_controller_register(dw);
+
 	return 0;
 }
 
@@ -1904,11 +1935,12 @@ static const struct of_device_id dw_dma_of_id_table[] = {
 MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
 #endif
 
-static const struct platform_device_id dw_dma_ids[] = {
-	/* Name,	Request Line Base */
-	{ "INTL9C60",	(kernel_ulong_t)16 },
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id dw_dma_acpi_id_table[] = {
+	{ "INTL9C60", 0 },
 	{ }
 };
+#endif
 
 static struct platform_driver dw_driver = {
 	.probe		= dw_probe,
@@ -1918,8 +1950,8 @@ static struct platform_driver dw_driver = {
 		.name	= "dw_dmac",
 		.pm	= &dw_dev_pm_ops,
 		.of_match_table = of_match_ptr(dw_dma_of_id_table),
+		.acpi_match_table = ACPI_PTR(dw_dma_acpi_id_table),
 	},
-	.id_table	= dw_dma_ids,
 };
 
 static int __init dw_init(void)
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 9b0e12e..9d41720 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -250,7 +250,6 @@ struct dw_dma {
 	/* hardware configuration */
 	unsigned char		nr_masters;
 	unsigned char		data_width[4];
-	unsigned int		request_line_base;
 
 	struct dw_dma_chan	chan[0];
 };
-- 
1.8.2.rc0.22.gb3600c3

[PATCH v2 5/5] ACPI / LPSS: add support of shared clock

[Andy Shevchenko]

From: "Rafael J. Wysocki" <rjw@sisk.pl>

The DMA controller in Lynxpoint is using the LPSS root clock as a functional
clock to work properly. Proposed patch adds support of the shared clock. It
also avoids hardcoding the name of the DMA device in clk-lpt.c and the name of
the root clock in acpi_lpss.c.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/acpi/acpi_lpss.c               | 26 ++++++++++++++++++++++----
 drivers/clk/x86/clk-lpt.c              | 15 +++++++++++----
 include/linux/platform_data/clk-lpss.h |  5 +++++
 3 files changed, 38 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index b1c9542..652fd5c 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss");
 
 struct lpss_device_desc {
 	bool clk_required;
-	const char *clk_parent;
+	const char *clkdev_name;
 	bool ltr_required;
 	unsigned int prv_offset;
 };
 
+static struct lpss_device_desc lpss_dma_desc = {
+	.clk_required = true,
+	.clkdev_name = "hclk",
+};
+
 struct lpss_private_data {
 	void __iomem *mmio_base;
 	resource_size_t mmio_size;
@@ -49,7 +54,6 @@ struct lpss_private_data {
 
 static struct lpss_device_desc lpt_dev_desc = {
 	.clk_required = true,
-	.clk_parent = "lpss_clk",
 	.prv_offset = 0x800,
 	.ltr_required = true,
 };
@@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = {
 };
 
 static const struct acpi_device_id acpi_lpss_device_ids[] = {
+	/* Generic LPSS devices */
+	{ "INTL9C60", (unsigned long)&lpss_dma_desc },
+
 	/* Lynxpoint LPSS devices */
 	{ "INT33C0", (unsigned long)&lpt_dev_desc },
 	{ "INT33C1", (unsigned long)&lpt_dev_desc },
@@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev,
 				 struct lpss_private_data *pdata)
 {
 	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
+	struct lpss_clk_data *clk_data;
 
 	if (!lpss_clk_dev)
 		lpt_register_clock_device();
 
-	if (!dev_desc->clk_parent || !pdata->mmio_base
+	clk_data = platform_get_drvdata(lpss_clk_dev);
+	if (!clk_data)
+		return -ENODEV;
+
+	if (dev_desc->clkdev_name) {
+		clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name,
+				    dev_name(&adev->dev));
+		return 0;
+	}
+
+	if (!pdata->mmio_base
 	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 		return -ENODATA;
 
 	pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
-				       dev_desc->clk_parent, 0,
+				       clk_data->name, 0,
 				       pdata->mmio_base + dev_desc->prv_offset,
 				       0, 0, NULL);
 	if (IS_ERR(pdata->clk))
diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
index 5cf4f46..e70fae3f 100644
--- a/drivers/clk/x86/clk-lpt.c
+++ b/drivers/clk/x86/clk-lpt.c
@@ -15,22 +15,29 @@
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/platform_data/clk-lpss.h>
 #include <linux/platform_device.h>
 
 #define PRV_CLOCK_PARAMS 0x800
 
 static int lpt_clk_probe(struct platform_device *pdev)
 {
+	struct lpss_clk_data *drvdata;
 	struct clk *clk;
 
+	drvdata = devm_kmalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
 	/* LPSS free running clock */
-	clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
-				      100000000);
+	drvdata->name = "lpss_clk";
+	clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL,
+				      CLK_IS_ROOT, 100000000);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	/* Shared DMA clock */
-	clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
+	drvdata->clk = clk;
+	platform_set_drvdata(pdev, drvdata);
 	return 0;
 }
 
diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
index 528e73c..2390199 100644
--- a/include/linux/platform_data/clk-lpss.h
+++ b/include/linux/platform_data/clk-lpss.h
@@ -13,6 +13,11 @@
 #ifndef __CLK_LPSS_H
 #define __CLK_LPSS_H
 
+struct lpss_clk_data {
+	const char *name;
+	struct clk *clk;
+};
+
 extern int lpt_clk_init(void);
 
 #endif /* __CLK_LPSS_H */
-- 
1.8.2.rc0.22.gb3600c3

Re: [PATCH v2 5/5] ACPI / LPSS: add support of shared clock

[Rafael J. Wysocki]

On Tuesday, April 09, 2013 02:05:47 PM Andy Shevchenko wrote:
> From: "Rafael J. Wysocki" <rjw@sisk.pl>

Well, that should be

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> 
> The DMA controller in Lynxpoint is using the LPSS root clock as a functional
> clock to work properly. Proposed patch adds support of the shared clock. It
> also avoids hardcoding the name of the DMA device in clk-lpt.c and the name of
> the root clock in acpi_lpss.c.
> 
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

and accordingly:

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>


> ---
>  drivers/acpi/acpi_lpss.c               | 26 ++++++++++++++++++++++----
>  drivers/clk/x86/clk-lpt.c              | 15 +++++++++++----
>  include/linux/platform_data/clk-lpss.h |  5 +++++
>  3 files changed, 38 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
> index b1c9542..652fd5c 100644
> --- a/drivers/acpi/acpi_lpss.c
> +++ b/drivers/acpi/acpi_lpss.c
> @@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss");
>  
>  struct lpss_device_desc {
>  	bool clk_required;
> -	const char *clk_parent;
> +	const char *clkdev_name;
>  	bool ltr_required;
>  	unsigned int prv_offset;
>  };
>  
> +static struct lpss_device_desc lpss_dma_desc = {
> +	.clk_required = true,
> +	.clkdev_name = "hclk",
> +};
> +
>  struct lpss_private_data {
>  	void __iomem *mmio_base;
>  	resource_size_t mmio_size;
> @@ -49,7 +54,6 @@ struct lpss_private_data {
>  
>  static struct lpss_device_desc lpt_dev_desc = {
>  	.clk_required = true,
> -	.clk_parent = "lpss_clk",
>  	.prv_offset = 0x800,
>  	.ltr_required = true,
>  };
> @@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = {
>  };
>  
>  static const struct acpi_device_id acpi_lpss_device_ids[] = {
> +	/* Generic LPSS devices */
> +	{ "INTL9C60", (unsigned long)&lpss_dma_desc },
> +
>  	/* Lynxpoint LPSS devices */
>  	{ "INT33C0", (unsigned long)&lpt_dev_desc },
>  	{ "INT33C1", (unsigned long)&lpt_dev_desc },
> @@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev,
>  				 struct lpss_private_data *pdata)
>  {
>  	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
> +	struct lpss_clk_data *clk_data;
>  
>  	if (!lpss_clk_dev)
>  		lpt_register_clock_device();
>  
> -	if (!dev_desc->clk_parent || !pdata->mmio_base
> +	clk_data = platform_get_drvdata(lpss_clk_dev);
> +	if (!clk_data)
> +		return -ENODEV;
> +
> +	if (dev_desc->clkdev_name) {
> +		clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name,
> +				    dev_name(&adev->dev));
> +		return 0;
> +	}
> +
> +	if (!pdata->mmio_base
>  	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
>  		return -ENODATA;
>  
>  	pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
> -				       dev_desc->clk_parent, 0,
> +				       clk_data->name, 0,
>  				       pdata->mmio_base + dev_desc->prv_offset,
>  				       0, 0, NULL);
>  	if (IS_ERR(pdata->clk))
> diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
> index 5cf4f46..e70fae3f 100644
> --- a/drivers/clk/x86/clk-lpt.c
> +++ b/drivers/clk/x86/clk-lpt.c
> @@ -15,22 +15,29 @@
>  #include <linux/clk-provider.h>
>  #include <linux/err.h>
>  #include <linux/module.h>
> +#include <linux/platform_data/clk-lpss.h>
>  #include <linux/platform_device.h>
>  
>  #define PRV_CLOCK_PARAMS 0x800
>  
>  static int lpt_clk_probe(struct platform_device *pdev)
>  {
> +	struct lpss_clk_data *drvdata;
>  	struct clk *clk;
>  
> +	drvdata = devm_kmalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
> +	if (!drvdata)
> +		return -ENOMEM;
> +
>  	/* LPSS free running clock */
> -	clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
> -				      100000000);
> +	drvdata->name = "lpss_clk";
> +	clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL,
> +				      CLK_IS_ROOT, 100000000);
>  	if (IS_ERR(clk))
>  		return PTR_ERR(clk);
>  
> -	/* Shared DMA clock */
> -	clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
> +	drvdata->clk = clk;
> +	platform_set_drvdata(pdev, drvdata);
>  	return 0;
>  }
>  
> diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
> index 528e73c..2390199 100644
> --- a/include/linux/platform_data/clk-lpss.h
> +++ b/include/linux/platform_data/clk-lpss.h
> @@ -13,6 +13,11 @@
>  #ifndef __CLK_LPSS_H
>  #define __CLK_LPSS_H
>  
> +struct lpss_clk_data {
> +	const char *name;
> +	struct clk *clk;
> +};
> +
>  extern int lpt_clk_init(void);
>  
>  #endif /* __CLK_LPSS_H */
> 
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[PATCH v2.1 5/5] ACPI / LPSS: add support of shared clock

[Andy Shevchenko]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

The DMA controller in Lynxpoint is using the LPSS root clock as a functional
clock to work properly. Proposed patch adds support of the shared clock. It
also avoids hardcoding the name of the DMA device in clk-lpt.c and the name of
the root clock in acpi_lpss.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/acpi_lpss.c               | 26 ++++++++++++++++++++++----
 drivers/clk/x86/clk-lpt.c              | 15 +++++++++++----
 include/linux/platform_data/clk-lpss.h |  5 +++++
 3 files changed, 38 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index b1c9542..652fd5c 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss");
 
 struct lpss_device_desc {
 	bool clk_required;
-	const char *clk_parent;
+	const char *clkdev_name;
 	bool ltr_required;
 	unsigned int prv_offset;
 };
 
+static struct lpss_device_desc lpss_dma_desc = {
+	.clk_required = true,
+	.clkdev_name = "hclk",
+};
+
 struct lpss_private_data {
 	void __iomem *mmio_base;
 	resource_size_t mmio_size;
@@ -49,7 +54,6 @@ struct lpss_private_data {
 
 static struct lpss_device_desc lpt_dev_desc = {
 	.clk_required = true,
-	.clk_parent = "lpss_clk",
 	.prv_offset = 0x800,
 	.ltr_required = true,
 };
@@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = {
 };
 
 static const struct acpi_device_id acpi_lpss_device_ids[] = {
+	/* Generic LPSS devices */
+	{ "INTL9C60", (unsigned long)&lpss_dma_desc },
+
 	/* Lynxpoint LPSS devices */
 	{ "INT33C0", (unsigned long)&lpt_dev_desc },
 	{ "INT33C1", (unsigned long)&lpt_dev_desc },
@@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev,
 				 struct lpss_private_data *pdata)
 {
 	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
+	struct lpss_clk_data *clk_data;
 
 	if (!lpss_clk_dev)
 		lpt_register_clock_device();
 
-	if (!dev_desc->clk_parent || !pdata->mmio_base
+	clk_data = platform_get_drvdata(lpss_clk_dev);
+	if (!clk_data)
+		return -ENODEV;
+
+	if (dev_desc->clkdev_name) {
+		clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name,
+				    dev_name(&adev->dev));
+		return 0;
+	}
+
+	if (!pdata->mmio_base
 	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 		return -ENODATA;
 
 	pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
-				       dev_desc->clk_parent, 0,
+				       clk_data->name, 0,
 				       pdata->mmio_base + dev_desc->prv_offset,
 				       0, 0, NULL);
 	if (IS_ERR(pdata->clk))
diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
index 5cf4f46..e70fae3f 100644
--- a/drivers/clk/x86/clk-lpt.c
+++ b/drivers/clk/x86/clk-lpt.c
@@ -15,22 +15,29 @@
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/platform_data/clk-lpss.h>
 #include <linux/platform_device.h>
 
 #define PRV_CLOCK_PARAMS 0x800
 
 static int lpt_clk_probe(struct platform_device *pdev)
 {
+	struct lpss_clk_data *drvdata;
 	struct clk *clk;
 
+	drvdata = devm_kmalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
 	/* LPSS free running clock */
-	clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
-				      100000000);
+	drvdata->name = "lpss_clk";
+	clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL,
+				      CLK_IS_ROOT, 100000000);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	/* Shared DMA clock */
-	clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
+	drvdata->clk = clk;
+	platform_set_drvdata(pdev, drvdata);
 	return 0;
 }
 
diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
index 528e73c..2390199 100644
--- a/include/linux/platform_data/clk-lpss.h
+++ b/include/linux/platform_data/clk-lpss.h
@@ -13,6 +13,11 @@
 #ifndef __CLK_LPSS_H
 #define __CLK_LPSS_H
 
+struct lpss_clk_data {
+	const char *name;
+	struct clk *clk;
+};
+
 extern int lpt_clk_init(void);
 
 #endif /* __CLK_LPSS_H */
-- 
1.8.2.rc0.22.gb3600c3

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Andy Shevchenko]

On Tue, 2013-04-09 at 14:05 +0300, Andy Shevchenko wrote: 
> There is a patch series which introduces ACPI DMA helpers in similar way like
> we have for DeviceTree.
> 
> In addition it applies this to the first user, namely dw_dmac driver.
> 
> Since v1:
>  - address one Vinod's comment
>  - replace 5/6 & 6/6 by 5/5 from Rafael
>  - tested on Intel Lynxpoint system

Vinod, any comments on the series? Could you consider merging these for
3.10?

> 
> Andy Shevchenko (4):
>   dma: acpi-dma: introduce ACPI DMA helpers
>   dmaengine: call acpi_dma_request_slave_channel as well
>   dma: acpi-dma: parse CSRT to extract additional resources
>   dw_dmac: add ACPI support
> 
> Rafael J. Wysocki (1):
>   ACPI / LPSS: add support of shared clock
> 
>  Documentation/acpi/enumeration.txt     |  77 ++++++
>  drivers/acpi/Makefile                  |   1 -
>  drivers/acpi/acpi_lpss.c               |  26 +-
>  drivers/acpi/csrt.c                    | 159 ------------
>  drivers/acpi/internal.h                |   1 -
>  drivers/acpi/scan.c                    |   1 -
>  drivers/clk/x86/clk-lpt.c              |  15 +-
>  drivers/dma/Kconfig                    |   4 +
>  drivers/dma/Makefile                   |   1 +
>  drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
>  drivers/dma/dmaengine.c                |   6 +
>  drivers/dma/dw_dmac.c                  |  68 +++--
>  drivers/dma/dw_dmac_regs.h             |   1 -
>  include/linux/acpi_dma.h               | 120 +++++++++
>  include/linux/platform_data/clk-lpss.h |   5 +
>  15 files changed, 741 insertions(+), 189 deletions(-)
>  delete mode 100644 drivers/acpi/csrt.c
>  create mode 100644 drivers/dma/acpi-dma.c
>  create mode 100644 include/linux/acpi_dma.h
> 

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Vinod Koul]

On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
> There is a patch series which introduces ACPI DMA helpers in similar way like
> we have for DeviceTree.
> 
> In addition it applies this to the first user, namely dw_dmac driver.
Applied w/o 3 & 5.2 they failed, can you pls rebase and resend

--
~Vinod
> 
> Since v1:
>  - address one Vinod's comment
>  - replace 5/6 & 6/6 by 5/5 from Rafael
>  - tested on Intel Lynxpoint system
> 
> Andy Shevchenko (4):
>   dma: acpi-dma: introduce ACPI DMA helpers
>   dmaengine: call acpi_dma_request_slave_channel as well
>   dma: acpi-dma: parse CSRT to extract additional resources
>   dw_dmac: add ACPI support
> 
> Rafael J. Wysocki (1):
>   ACPI / LPSS: add support of shared clock
> 
>  Documentation/acpi/enumeration.txt     |  77 ++++++
>  drivers/acpi/Makefile                  |   1 -
>  drivers/acpi/acpi_lpss.c               |  26 +-
>  drivers/acpi/csrt.c                    | 159 ------------
>  drivers/acpi/internal.h                |   1 -
>  drivers/acpi/scan.c                    |   1 -
>  drivers/clk/x86/clk-lpt.c              |  15 +-
>  drivers/dma/Kconfig                    |   4 +
>  drivers/dma/Makefile                   |   1 +
>  drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
>  drivers/dma/dmaengine.c                |   6 +
>  drivers/dma/dw_dmac.c                  |  68 +++--
>  drivers/dma/dw_dmac_regs.h             |   1 -
>  include/linux/acpi_dma.h               | 120 +++++++++
>  include/linux/platform_data/clk-lpss.h |   5 +
>  15 files changed, 741 insertions(+), 189 deletions(-)
>  delete mode 100644 drivers/acpi/csrt.c
>  create mode 100644 drivers/dma/acpi-dma.c
>  create mode 100644 include/linux/acpi_dma.h
> 
> -- 
> 1.8.2.rc0.22.gb3600c3
> 

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Andy Shevchenko]

Will do tomorrow. Thanks!

On Mon, Apr 15, 2013 at 7:36 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
>> There is a patch series which introduces ACPI DMA helpers in similar way like
>> we have for DeviceTree.
>>
>> In addition it applies this to the first user, namely dw_dmac driver.
> Applied w/o 3 & 5.2 they failed, can you pls rebase and resend
>
> --
> ~Vinod
>>
>> Since v1:
>>  - address one Vinod's comment
>>  - replace 5/6 & 6/6 by 5/5 from Rafael
>>  - tested on Intel Lynxpoint system
>>
>> Andy Shevchenko (4):
>>   dma: acpi-dma: introduce ACPI DMA helpers
>>   dmaengine: call acpi_dma_request_slave_channel as well
>>   dma: acpi-dma: parse CSRT to extract additional resources
>>   dw_dmac: add ACPI support
>>
>> Rafael J. Wysocki (1):
>>   ACPI / LPSS: add support of shared clock
>>
>>  Documentation/acpi/enumeration.txt     |  77 ++++++
>>  drivers/acpi/Makefile                  |   1 -
>>  drivers/acpi/acpi_lpss.c               |  26 +-
>>  drivers/acpi/csrt.c                    | 159 ------------
>>  drivers/acpi/internal.h                |   1 -
>>  drivers/acpi/scan.c                    |   1 -
>>  drivers/clk/x86/clk-lpt.c              |  15 +-
>>  drivers/dma/Kconfig                    |   4 +
>>  drivers/dma/Makefile                   |   1 +
>>  drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
>>  drivers/dma/dmaengine.c                |   6 +
>>  drivers/dma/dw_dmac.c                  |  68 +++--
>>  drivers/dma/dw_dmac_regs.h             |   1 -
>>  include/linux/acpi_dma.h               | 120 +++++++++
>>  include/linux/platform_data/clk-lpss.h |   5 +
>>  15 files changed, 741 insertions(+), 189 deletions(-)
>>  delete mode 100644 drivers/acpi/csrt.c
>>  create mode 100644 drivers/dma/acpi-dma.c
>>  create mode 100644 include/linux/acpi_dma.h
>>
>> --
>> 1.8.2.rc0.22.gb3600c3
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Andy Shevchenko]

On Mon, 2013-04-15 at 22:06 +0530, Vinod Koul wrote: 
> On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
> > There is a patch series which introduces ACPI DMA helpers in similar way like
> > we have for DeviceTree.
> > 
> > In addition it applies this to the first user, namely dw_dmac driver.
> Applied w/o 3 & 5.2 they failed, can you pls rebase and resend
> 

Actually those two (at least 5/5) can't be applied on top of slave-dma.
The patches requires slave-dma and linux-pm together. I heard it's
usually achieved by creating a specific branch in one subsystem
(linux-pm in our case) for another.

Rafael, what could we do here?

> --
> ~Vinod
> > 
> > Since v1:
> >  - address one Vinod's comment
> >  - replace 5/6 & 6/6 by 5/5 from Rafael
> >  - tested on Intel Lynxpoint system
> > 
> > Andy Shevchenko (4):
> >   dma: acpi-dma: introduce ACPI DMA helpers
> >   dmaengine: call acpi_dma_request_slave_channel as well
> >   dma: acpi-dma: parse CSRT to extract additional resources
> >   dw_dmac: add ACPI support
> > 
> > Rafael J. Wysocki (1):
> >   ACPI / LPSS: add support of shared clock
> > 
> >  Documentation/acpi/enumeration.txt     |  77 ++++++
> >  drivers/acpi/Makefile                  |   1 -
> >  drivers/acpi/acpi_lpss.c               |  26 +-
> >  drivers/acpi/csrt.c                    | 159 ------------
> >  drivers/acpi/internal.h                |   1 -
> >  drivers/acpi/scan.c                    |   1 -
> >  drivers/clk/x86/clk-lpt.c              |  15 +-
> >  drivers/dma/Kconfig                    |   4 +
> >  drivers/dma/Makefile                   |   1 +
> >  drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
> >  drivers/dma/dmaengine.c                |   6 +
> >  drivers/dma/dw_dmac.c                  |  68 +++--
> >  drivers/dma/dw_dmac_regs.h             |   1 -
> >  include/linux/acpi_dma.h               | 120 +++++++++
> >  include/linux/platform_data/clk-lpss.h |   5 +
> >  15 files changed, 741 insertions(+), 189 deletions(-)
> >  delete mode 100644 drivers/acpi/csrt.c
> >  create mode 100644 drivers/dma/acpi-dma.c
> >  create mode 100644 include/linux/acpi_dma.h
> > 
> > -- 
> > 1.8.2.rc0.22.gb3600c3
> > 

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Rafael J. Wysocki]

On Tuesday, April 16, 2013 03:14:47 PM Andy Shevchenko wrote:
> On Mon, 2013-04-15 at 22:06 +0530, Vinod Koul wrote: 
> > On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
> > > There is a patch series which introduces ACPI DMA helpers in similar way like
> > > we have for DeviceTree.
> > > 
> > > In addition it applies this to the first user, namely dw_dmac driver.
> > Applied w/o 3 & 5.2 they failed, can you pls rebase and resend
> > 
> 
> Actually those two (at least 5/5) can't be applied on top of slave-dma.
> The patches requires slave-dma and linux-pm together. I heard it's
> usually achieved by creating a specific branch in one subsystem
> (linux-pm in our case) for another.
> 
> Rafael, what could we do here?

I suppose Vinod can pull from my acpi-lpss (which is guaranteed not to be
rebased at this point) and apply the series on top of that.

Thanks,
Rafael


> > > Since v1:
> > >  - address one Vinod's comment
> > >  - replace 5/6 & 6/6 by 5/5 from Rafael
> > >  - tested on Intel Lynxpoint system
> > > 
> > > Andy Shevchenko (4):
> > >   dma: acpi-dma: introduce ACPI DMA helpers
> > >   dmaengine: call acpi_dma_request_slave_channel as well
> > >   dma: acpi-dma: parse CSRT to extract additional resources
> > >   dw_dmac: add ACPI support
> > > 
> > > Rafael J. Wysocki (1):
> > >   ACPI / LPSS: add support of shared clock
> > > 
> > >  Documentation/acpi/enumeration.txt     |  77 ++++++
> > >  drivers/acpi/Makefile                  |   1 -
> > >  drivers/acpi/acpi_lpss.c               |  26 +-
> > >  drivers/acpi/csrt.c                    | 159 ------------
> > >  drivers/acpi/internal.h                |   1 -
> > >  drivers/acpi/scan.c                    |   1 -
> > >  drivers/clk/x86/clk-lpt.c              |  15 +-
> > >  drivers/dma/Kconfig                    |   4 +
> > >  drivers/dma/Makefile                   |   1 +
> > >  drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
> > >  drivers/dma/dmaengine.c                |   6 +
> > >  drivers/dma/dw_dmac.c                  |  68 +++--
> > >  drivers/dma/dw_dmac_regs.h             |   1 -
> > >  include/linux/acpi_dma.h               | 120 +++++++++
> > >  include/linux/platform_data/clk-lpss.h |   5 +
> > >  15 files changed, 741 insertions(+), 189 deletions(-)
> > >  delete mode 100644 drivers/acpi/csrt.c
> > >  create mode 100644 drivers/dma/acpi-dma.c
> > >  create mode 100644 include/linux/acpi_dma.h
> > > 
> 
> 
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Vinod Koul]

On Tue, Apr 16, 2013 at 08:11:57PM +0200, Rafael J. Wysocki wrote:
> On Tuesday, April 16, 2013 03:14:47 PM Andy Shevchenko wrote:
> > On Mon, 2013-04-15 at 22:06 +0530, Vinod Koul wrote: 
> > > On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
> > > > There is a patch series which introduces ACPI DMA helpers in similar way like
> > > > we have for DeviceTree.
> > > > 
> > > > In addition it applies this to the first user, namely dw_dmac driver.
> > > Applied w/o 3 & 5.2 they failed, can you pls rebase and resend
> > > 
> > 
> > Actually those two (at least 5/5) can't be applied on top of slave-dma.
> > The patches requires slave-dma and linux-pm together. I heard it's
> > usually achieved by creating a specific branch in one subsystem
> > (linux-pm in our case) for another.
> > 
> > Rafael, what could we do here?
> 
> I suppose Vinod can pull from my acpi-lpss (which is guaranteed not to be
> rebased at this point) and apply the series on top of that.
Or I can wait for rc1 and apply afterwards...?
> 
> Thanks,
> Rafael
> 
> 
> > > > Since v1:
> > > >  - address one Vinod's comment
> > > >  - replace 5/6 & 6/6 by 5/5 from Rafael
> > > >  - tested on Intel Lynxpoint system
> > > > 
> > > > Andy Shevchenko (4):
> > > >   dma: acpi-dma: introduce ACPI DMA helpers
> > > >   dmaengine: call acpi_dma_request_slave_channel as well
> > > >   dma: acpi-dma: parse CSRT to extract additional resources
> > > >   dw_dmac: add ACPI support
> > > > 
> > > > Rafael J. Wysocki (1):
> > > >   ACPI / LPSS: add support of shared clock
> > > > 
> > > >  Documentation/acpi/enumeration.txt     |  77 ++++++
> > > >  drivers/acpi/Makefile                  |   1 -
> > > >  drivers/acpi/acpi_lpss.c               |  26 +-
> > > >  drivers/acpi/csrt.c                    | 159 ------------
> > > >  drivers/acpi/internal.h                |   1 -
> > > >  drivers/acpi/scan.c                    |   1 -
> > > >  drivers/clk/x86/clk-lpt.c              |  15 +-
> > > >  drivers/dma/Kconfig                    |   4 +
> > > >  drivers/dma/Makefile                   |   1 +
> > > >  drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
> > > >  drivers/dma/dmaengine.c                |   6 +
> > > >  drivers/dma/dw_dmac.c                  |  68 +++--
> > > >  drivers/dma/dw_dmac_regs.h             |   1 -
> > > >  include/linux/acpi_dma.h               | 120 +++++++++
> > > >  include/linux/platform_data/clk-lpss.h |   5 +
> > > >  15 files changed, 741 insertions(+), 189 deletions(-)
> > > >  delete mode 100644 drivers/acpi/csrt.c
> > > >  create mode 100644 drivers/dma/acpi-dma.c
> > > >  create mode 100644 include/linux/acpi_dma.h
> > > > 
> > 
> > 
> -- 
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Vinod Koul]

On Tue, Apr 16, 2013 at 08:11:57PM +0200, Rafael J. Wysocki wrote:
> On Tuesday, April 16, 2013 03:14:47 PM Andy Shevchenko wrote:
> > On Mon, 2013-04-15 at 22:06 +0530, Vinod Koul wrote: 
> > > On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
> > > > There is a patch series which introduces ACPI DMA helpers in similar way like
> > > > we have for DeviceTree.
> > > > 
> > > > In addition it applies this to the first user, namely dw_dmac driver.
> > > Applied w/o 3 & 5.2 they failed, can you pls rebase and resend
> > > 
> > 
> > Actually those two (at least 5/5) can't be applied on top of slave-dma.
> > The patches requires slave-dma and linux-pm together. I heard it's
> > usually achieved by creating a specific branch in one subsystem
> > (linux-pm in our case) for another.
> > 
> > Rafael, what could we do here?
> 
> I suppose Vinod can pull from my acpi-lpss (which is guaranteed not to be
> rebased at this point) and apply the series on top of that.
Or I can wait for rc1 and apply afterwards...?
> 
> Thanks,
> Rafael
> 
> 
> > > > Since v1:
> > > >  - address one Vinod's comment
> > > >  - replace 5/6 & 6/6 by 5/5 from Rafael
> > > >  - tested on Intel Lynxpoint system
> > > > 
> > > > Andy Shevchenko (4):
> > > >   dma: acpi-dma: introduce ACPI DMA helpers
> > > >   dmaengine: call acpi_dma_request_slave_channel as well
> > > >   dma: acpi-dma: parse CSRT to extract additional resources
> > > >   dw_dmac: add ACPI support
> > > > 
> > > > Rafael J. Wysocki (1):
> > > >   ACPI / LPSS: add support of shared clock
> > > > 
> > > >  Documentation/acpi/enumeration.txt     |  77 ++++++
> > > >  drivers/acpi/Makefile                  |   1 -
> > > >  drivers/acpi/acpi_lpss.c               |  26 +-
> > > >  drivers/acpi/csrt.c                    | 159 ------------
> > > >  drivers/acpi/internal.h                |   1 -
> > > >  drivers/acpi/scan.c                    |   1 -
> > > >  drivers/clk/x86/clk-lpt.c              |  15 +-
> > > >  drivers/dma/Kconfig                    |   4 +
> > > >  drivers/dma/Makefile                   |   1 +
> > > >  drivers/dma/acpi-dma.c                 | 445 +++++++++++++++++++++++++++++++++
> > > >  drivers/dma/dmaengine.c                |   6 +
> > > >  drivers/dma/dw_dmac.c                  |  68 +++--
> > > >  drivers/dma/dw_dmac_regs.h             |   1 -
> > > >  include/linux/acpi_dma.h               | 120 +++++++++
> > > >  include/linux/platform_data/clk-lpss.h |   5 +
> > > >  15 files changed, 741 insertions(+), 189 deletions(-)
> > > >  delete mode 100644 drivers/acpi/csrt.c
> > > >  create mode 100644 drivers/dma/acpi-dma.c
> > > >  create mode 100644 include/linux/acpi_dma.h
> > > > 
> > 
> > 
> -- 
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Andy Shevchenko]

On Mon, Apr 22, 2013 at 8:56 AM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Tue, Apr 16, 2013 at 08:11:57PM +0200, Rafael J. Wysocki wrote:
>> On Tuesday, April 16, 2013 03:14:47 PM Andy Shevchenko wrote:
>> > On Mon, 2013-04-15 at 22:06 +0530, Vinod Koul wrote:
>> > > On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
>> > > > There is a patch series which introduces ACPI DMA helpers in similar way like
>> > > > we have for DeviceTree.
>> > > >
>> > > > In addition it applies this to the first user, namely dw_dmac driver.
>> > > Applied w/o 3 & 5.2 they failed, can you pls rebase and resend
>> > >
>> >
>> > Actually those two (at least 5/5) can't be applied on top of slave-dma.
>> > The patches requires slave-dma and linux-pm together. I heard it's
>> > usually achieved by creating a specific branch in one subsystem
>> > (linux-pm in our case) for another.
>> >
>> > Rafael, what could we do here?
>>
>> I suppose Vinod can pull from my acpi-lpss (which is guaranteed not to be
>> rebased at this point) and apply the series on top of that.
> Or I can wait for rc1 and apply afterwards...?

Mika and I have no objections to go this way.

--
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 0/5] dmaengine: add ACPI DMA helpers and use them in dw_dmac

[Rafael J. Wysocki]

On Monday, April 22, 2013 01:07:39 PM Andy Shevchenko wrote:
> On Mon, Apr 22, 2013 at 8:56 AM, Vinod Koul <vinod.koul@intel.com> wrote:
> > On Tue, Apr 16, 2013 at 08:11:57PM +0200, Rafael J. Wysocki wrote:
> >> On Tuesday, April 16, 2013 03:14:47 PM Andy Shevchenko wrote:
> >> > On Mon, 2013-04-15 at 22:06 +0530, Vinod Koul wrote:
> >> > > On Tue, Apr 09, 2013 at 02:05:42PM +0300, Andy Shevchenko wrote:
> >> > > > There is a patch series which introduces ACPI DMA helpers in similar way like
> >> > > > we have for DeviceTree.
> >> > > >
> >> > > > In addition it applies this to the first user, namely dw_dmac driver.
> >> > > Applied w/o 3 & 5.2 they failed, can you pls rebase and resend
> >> > >
> >> >
> >> > Actually those two (at least 5/5) can't be applied on top of slave-dma.
> >> > The patches requires slave-dma and linux-pm together. I heard it's
> >> > usually achieved by creating a specific branch in one subsystem
> >> > (linux-pm in our case) for another.
> >> >
> >> > Rafael, what could we do here?
> >>
> >> I suppose Vinod can pull from my acpi-lpss (which is guaranteed not to be
> >> rebased at this point) and apply the series on top of that.
> > Or I can wait for rc1 and apply afterwards...?
> 
> Mika and I have no objections to go this way.

That'd be fine by me too.

Thanks,
Rafael


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[PATCH v2.2 5/5] ACPI / LPSS: register clock device for Lynxpoint DMA properly

[Andy Shevchenko]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To
work properly it is using the LPSS root clock as a functional clock. That's why
we have to register the clock device accordingly to the ACPI ID of the DMA
controller. The acpi_lpss.c module is responsible to do the job.

This patch also removes hardcoded name of the DMA device in clk-lpt.c and the
name of the root clock in acpi_lpss.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Since 5/5 v2.1:
- fix a typo (devm_kzalloc)
- amend commit message to clarify what is done and why.
 drivers/acpi/acpi_lpss.c               | 26 ++++++++++++++++++++++----
 drivers/clk/x86/clk-lpt.c              | 15 +++++++++++----
 include/linux/platform_data/clk-lpss.h |  5 +++++
 3 files changed, 38 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index b1c9542..652fd5c 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss");
 
 struct lpss_device_desc {
 	bool clk_required;
-	const char *clk_parent;
+	const char *clkdev_name;
 	bool ltr_required;
 	unsigned int prv_offset;
 };
 
+static struct lpss_device_desc lpss_dma_desc = {
+	.clk_required = true,
+	.clkdev_name = "hclk",
+};
+
 struct lpss_private_data {
 	void __iomem *mmio_base;
 	resource_size_t mmio_size;
@@ -49,7 +54,6 @@ struct lpss_private_data {
 
 static struct lpss_device_desc lpt_dev_desc = {
 	.clk_required = true,
-	.clk_parent = "lpss_clk",
 	.prv_offset = 0x800,
 	.ltr_required = true,
 };
@@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = {
 };
 
 static const struct acpi_device_id acpi_lpss_device_ids[] = {
+	/* Generic LPSS devices */
+	{ "INTL9C60", (unsigned long)&lpss_dma_desc },
+
 	/* Lynxpoint LPSS devices */
 	{ "INT33C0", (unsigned long)&lpt_dev_desc },
 	{ "INT33C1", (unsigned long)&lpt_dev_desc },
@@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev,
 				 struct lpss_private_data *pdata)
 {
 	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
+	struct lpss_clk_data *clk_data;
 
 	if (!lpss_clk_dev)
 		lpt_register_clock_device();
 
-	if (!dev_desc->clk_parent || !pdata->mmio_base
+	clk_data = platform_get_drvdata(lpss_clk_dev);
+	if (!clk_data)
+		return -ENODEV;
+
+	if (dev_desc->clkdev_name) {
+		clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name,
+				    dev_name(&adev->dev));
+		return 0;
+	}
+
+	if (!pdata->mmio_base
 	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 		return -ENODATA;
 
 	pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
-				       dev_desc->clk_parent, 0,
+				       clk_data->name, 0,
 				       pdata->mmio_base + dev_desc->prv_offset,
 				       0, 0, NULL);
 	if (IS_ERR(pdata->clk))
diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
index 5cf4f46..4f45eee 100644
--- a/drivers/clk/x86/clk-lpt.c
+++ b/drivers/clk/x86/clk-lpt.c
@@ -15,22 +15,29 @@
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/platform_data/clk-lpss.h>
 #include <linux/platform_device.h>
 
 #define PRV_CLOCK_PARAMS 0x800
 
 static int lpt_clk_probe(struct platform_device *pdev)
 {
+	struct lpss_clk_data *drvdata;
 	struct clk *clk;
 
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
 	/* LPSS free running clock */
-	clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
-				      100000000);
+	drvdata->name = "lpss_clk";
+	clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL,
+				      CLK_IS_ROOT, 100000000);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	/* Shared DMA clock */
-	clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
+	drvdata->clk = clk;
+	platform_set_drvdata(pdev, drvdata);
 	return 0;
 }
 
diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
index 528e73c..2390199 100644
--- a/include/linux/platform_data/clk-lpss.h
+++ b/include/linux/platform_data/clk-lpss.h
@@ -13,6 +13,11 @@
 #ifndef __CLK_LPSS_H
 #define __CLK_LPSS_H
 
+struct lpss_clk_data {
+	const char *name;
+	struct clk *clk;
+};
+
 extern int lpt_clk_init(void);
 
 #endif /* __CLK_LPSS_H */
-- 
1.8.2.rc0.22.gb3600c3