* [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs
@ 2013-04-18 23:52 Andrea Adami
2013-04-18 23:52 ` [meta-handheld][PATCH 2/2] linux-yocto_3.8: patches: add Upstream-Status and do minor edits Andrea Adami
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Andrea Adami @ 2013-04-18 23:52 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
---
.../linux/linux-yocto-3.8/akita/akita.scc | 8 +-
recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 6 +-
.../linux/linux-yocto-3.8/collie-eraseinfo.patch | 31 -----
.../linux/linux-yocto-3.8/collie-jedec-probe.patch | 11 --
.../linux/linux-yocto-3.8/collie/collie.scc | 8 +-
.../linux-yocto-3.8/locomo_kbd_tweak-r2.patch | 75 ------------
.../linux/linux-yocto-3.8/mcp-device.patch | 13 --
.../patches-locomokbd/locomo_kbd_tweak-r2.patch | 75 ++++++++++++
.../patches/patches-mfd/mcp-device.patch | 13 ++
.../patches/patches-mtd/collie-eraseinfo.patch | 31 +++++
.../patches/patches-mtd/collie-jedec-probe.patch | 11 ++
.../patches/patches-pxa/pxa27x-sa1100-rtc.patch | 34 ++++++
.../patches/patches-pxa/pxamci-regulator.patch | 135 +++++++++++++++++++++
.../patches/patches-pxa/sharpsl_param.patch | 24 ++++
.../patches/patches-pxa/spi-pxa2xx-fix-mem.patch | 34 ++++++
.../linux/linux-yocto-3.8/poodle/poodle.scc | 8 +-
.../linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch | 34 ------
.../linux/linux-yocto-3.8/pxamci-regulator.patch | 135 ---------------------
.../linux/linux-yocto-3.8/sharpsl_param.patch | 24 ----
.../linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch | 34 ------
.../linux/linux-yocto-3.8/spitz/spitz.scc | 8 +-
recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 6 +-
22 files changed, 379 insertions(+), 379 deletions(-)
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
index b40cb7e..001b11b 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
@@ -5,7 +5,7 @@ include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
include ../zaurus-usb-host.scc
-patch sharpsl_param.patch
-patch pxa27x-sa1100-rtc.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/pxa27x-sa1100-rtc.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
index a732d5e..edb99b6 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
@@ -3,6 +3,6 @@ kconf hardware c7x0.cfg
include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
-patch sharpsl_param.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch b/recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
deleted file mode 100644
index 6aba29e..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -120,7 +120,7 @@
- #define PM49FL008 0x006A
-
- /* Sharp */
--#define LH28F640BF 0x00b0
-+#define LH28F640BF 0x00B0
-
- /* ST - www.st.com */
- #define M29F800AB 0x0058
-@@ -1299,13 +1299,14 @@
- .mfr_id = CFI_MFR_SHARP,
- .dev_id = LH28F640BF,
- .name = "LH28F640BF",
-- .devtypes = CFI_DEVICETYPE_X8,
-+ .devtypes = CFI_DEVICETYPE_X16,
- .uaddr = MTD_UADDR_UNNECESSARY,
-- .dev_size = SIZE_4MiB,
-- .cmd_set = P_ID_INTEL_STD,
-- .nr_regions = 1,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_INTEL_EXT,
-+ .nr_regions = 2,
- .regions = {
-- ERASEINFO(0x40000,16),
-+ ERASEINFO(0x10000, 127),
-+ ERASEINFO(0x02000, 8),
- }
- }, {
- .mfr_id = CFI_MFR_SST,
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch b/recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
deleted file mode 100644
index 530643e..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-sa1100/collie.c
-+++ b/arch/arm/mach-sa1100/collie.c
-@@ -289,7 +289,7 @@
- }
-
- static struct flash_platform_data collie_flash_data = {
-- .map_name = "cfi_probe",
-+ .map_name = "jedec_probe",
- .init = collie_flash_init,
- .set_vpp = collie_set_vpp,
- .exit = collie_flash_exit,
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
index 3f96f24..857586e 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
@@ -2,7 +2,7 @@ kconf hardware collie.cfg
include ../zaurus-common.scc
-patch locomo_kbd_tweak-r2.patch
-patch mcp-device.patch
-patch collie-jedec-probe.patch
-patch collie-eraseinfo.patch
+patch ../patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
+patch ../patches/patches-mfd/mcp-device.patch
+patch ../patches/patches-mtd/collie-jedec-probe.patch
+patch ../patches/patches-mtd/collie-eraseinfo.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch b/recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
deleted file mode 100644
index 5f015f4..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From e60a4a9a3336a24a8e6ca3ea69587c60cb953881 Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami@gmail.com>
-Date: Sat, 21 Apr 2012 23:48:57 +0200
-Subject: [PATCH 43/43] locomokbd: apply tweaks for Zaurus
-
-* from http://www.rpsys.net/openzaurus/patches/
-
-Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
-Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
-
-diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
-index c94d610..2b978c8 100644
---- a/drivers/input/keyboard/locomokbd.c
-+++ b/drivers/input/keyboard/locomokbd.c
-@@ -39,27 +39,33 @@ MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
- MODULE_DESCRIPTION("LoCoMo keyboard driver");
- MODULE_LICENSE("GPL");
-
--#define LOCOMOKBD_NUMKEYS 128
--
--#define KEY_ACTIVITY KEY_F16
--#define KEY_CONTACT KEY_F18
--#define KEY_CENTER KEY_F15
-+#define LOCOMOKBD_NUMKEYS 128
-+
-+#define LOCOMO_KEY_CALENDER KEY_LEFTCTRL
-+#define LOCOMO_KEY_ADDRESS KEY_LEFTALT /* Needed for SysRQ */
-+#define LOCOMO_KEY_HOME KEY_SYSRQ /* Needed for SysRQ */
-+#define LOCOMO_KEY_MENU KEY_F12
-+#define LOCOMO_KEY_MAIL KEY_F10
-+#define LOCOMO_KEY_OK KEY_F11 /* Don't hardwire to KEY_RETURN */
-+#define LOCOMO_KEY_CANCEL KEY_POWER
-+#define LOCOMO_KEY_CENTER KEY_F5 /* Don't hardwire to KEY_RETURN */
-+#define LOCOMO_KEY_FN KEY_F9
-
- static const unsigned char
- locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
-- 0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
-- 0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT, /* 10 - 19 */
-- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 20 - 29 */
-- 0, 0, 0, KEY_CENTER, 0, KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
-- 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
-- KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
-- KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, KEY_ENTER, 0, 0, /* 60 - 69 */
-- KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
-- 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
-- KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
-- 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
-- KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
-- KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
-+ 0, LOCOMO_KEY_CANCEL, LOCOMO_KEY_CALENDER, LOCOMO_KEY_HOME, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
-+ 0, 0, 0, 0, 0, 0, 0, LOCOMO_KEY_MENU, 0, LOCOMO_KEY_ADDRESS, /* 10 - 19 */
-+ 0, 0, 0, 0, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 20 - 29 */
-+ 0, 0, 0, LOCOMO_KEY_CENTER, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
-+ KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
-+ KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, LOCOMO_KEY_OK, 0, 0, /* 60 - 69 */
-+ KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
-+ 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
-+ KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
-+ 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
-+ KEY_LEFTSHIFT, KEY_TAB, LOCOMO_KEY_FN, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
-+ KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
- };
-
- #define KB_ROWS 16
-@@ -68,7 +74,7 @@ locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
- #define SCANCODE(c,r) ( ((c)<<4) + (r) + 1 )
-
- #define KB_DELAY 8
--#define SCAN_INTERVAL (HZ/10)
-+#define SCAN_INTERVAL (HZ/20)
-
- struct locomokbd {
- unsigned char keycode[LOCOMOKBD_NUMKEYS];
diff --git a/recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch b/recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
deleted file mode 100644
index 9a0a8ba..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/include/linux/mfd/mcp.h 2013-02-18 00:14:09.000000000 +0100
-+++ b/include/linux/mfd/mcp.h 2013-02-17 23:55:52.000000000 +0100
-@@ -10,6 +10,8 @@
- #ifndef MCP_H
- #define MCP_H
-
-+#include <linux/device.h>
-+
- struct mcp_ops;
-
- struct mcp {
-
-
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
new file mode 100644
index 0000000..5f015f4
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
@@ -0,0 +1,75 @@
+From e60a4a9a3336a24a8e6ca3ea69587c60cb953881 Mon Sep 17 00:00:00 2001
+From: Andrea Adami <andrea.adami@gmail.com>
+Date: Sat, 21 Apr 2012 23:48:57 +0200
+Subject: [PATCH 43/43] locomokbd: apply tweaks for Zaurus
+
+* from http://www.rpsys.net/openzaurus/patches/
+
+Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
+Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
+
+diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
+index c94d610..2b978c8 100644
+--- a/drivers/input/keyboard/locomokbd.c
++++ b/drivers/input/keyboard/locomokbd.c
+@@ -39,27 +39,33 @@ MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
+ MODULE_DESCRIPTION("LoCoMo keyboard driver");
+ MODULE_LICENSE("GPL");
+
+-#define LOCOMOKBD_NUMKEYS 128
+-
+-#define KEY_ACTIVITY KEY_F16
+-#define KEY_CONTACT KEY_F18
+-#define KEY_CENTER KEY_F15
++#define LOCOMOKBD_NUMKEYS 128
++
++#define LOCOMO_KEY_CALENDER KEY_LEFTCTRL
++#define LOCOMO_KEY_ADDRESS KEY_LEFTALT /* Needed for SysRQ */
++#define LOCOMO_KEY_HOME KEY_SYSRQ /* Needed for SysRQ */
++#define LOCOMO_KEY_MENU KEY_F12
++#define LOCOMO_KEY_MAIL KEY_F10
++#define LOCOMO_KEY_OK KEY_F11 /* Don't hardwire to KEY_RETURN */
++#define LOCOMO_KEY_CANCEL KEY_POWER
++#define LOCOMO_KEY_CENTER KEY_F5 /* Don't hardwire to KEY_RETURN */
++#define LOCOMO_KEY_FN KEY_F9
+
+ static const unsigned char
+ locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
+- 0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
+- 0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT, /* 10 - 19 */
+- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 20 - 29 */
+- 0, 0, 0, KEY_CENTER, 0, KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
+- 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
+- KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
+- KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, KEY_ENTER, 0, 0, /* 60 - 69 */
+- KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
+- 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
+- KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
+- 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
+- KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
+- KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
++ 0, LOCOMO_KEY_CANCEL, LOCOMO_KEY_CALENDER, LOCOMO_KEY_HOME, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
++ 0, 0, 0, 0, 0, 0, 0, LOCOMO_KEY_MENU, 0, LOCOMO_KEY_ADDRESS, /* 10 - 19 */
++ 0, 0, 0, 0, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 20 - 29 */
++ 0, 0, 0, LOCOMO_KEY_CENTER, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
++ 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
++ KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
++ KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, LOCOMO_KEY_OK, 0, 0, /* 60 - 69 */
++ KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
++ 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
++ KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
++ 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
++ KEY_LEFTSHIFT, KEY_TAB, LOCOMO_KEY_FN, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
++ KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
+ };
+
+ #define KB_ROWS 16
+@@ -68,7 +74,7 @@ locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
+ #define SCANCODE(c,r) ( ((c)<<4) + (r) + 1 )
+
+ #define KB_DELAY 8
+-#define SCAN_INTERVAL (HZ/10)
++#define SCAN_INTERVAL (HZ/20)
+
+ struct locomokbd {
+ unsigned char keycode[LOCOMOKBD_NUMKEYS];
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
new file mode 100644
index 0000000..9a0a8ba
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/mfd/mcp.h 2013-02-18 00:14:09.000000000 +0100
++++ b/include/linux/mfd/mcp.h 2013-02-17 23:55:52.000000000 +0100
+@@ -10,6 +10,8 @@
+ #ifndef MCP_H
+ #define MCP_H
+
++#include <linux/device.h>
++
+ struct mcp_ops;
+
+ struct mcp {
+
+
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
new file mode 100644
index 0000000..6aba29e
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
@@ -0,0 +1,31 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -120,7 +120,7 @@
+ #define PM49FL008 0x006A
+
+ /* Sharp */
+-#define LH28F640BF 0x00b0
++#define LH28F640BF 0x00B0
+
+ /* ST - www.st.com */
+ #define M29F800AB 0x0058
+@@ -1299,13 +1299,14 @@
+ .mfr_id = CFI_MFR_SHARP,
+ .dev_id = LH28F640BF,
+ .name = "LH28F640BF",
+- .devtypes = CFI_DEVICETYPE_X8,
++ .devtypes = CFI_DEVICETYPE_X16,
+ .uaddr = MTD_UADDR_UNNECESSARY,
+- .dev_size = SIZE_4MiB,
+- .cmd_set = P_ID_INTEL_STD,
+- .nr_regions = 1,
++ .dev_size = SIZE_8MiB,
++ .cmd_set = P_ID_INTEL_EXT,
++ .nr_regions = 2,
+ .regions = {
+- ERASEINFO(0x40000,16),
++ ERASEINFO(0x10000, 127),
++ ERASEINFO(0x02000, 8),
+ }
+ }, {
+ .mfr_id = CFI_MFR_SST,
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
new file mode 100644
index 0000000..530643e
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-sa1100/collie.c
++++ b/arch/arm/mach-sa1100/collie.c
+@@ -289,7 +289,7 @@
+ }
+
+ static struct flash_platform_data collie_flash_data = {
+- .map_name = "cfi_probe",
++ .map_name = "jedec_probe",
+ .init = collie_flash_init,
+ .set_vpp = collie_set_vpp,
+ .exit = collie_flash_exit,
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
new file mode 100644
index 0000000..7cb5385
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
@@ -0,0 +1,34 @@
+From fcee0050f8ce5296e8007ed7ed17d98f334a8f38 Mon Sep 17 00:00:00 2001
+From: Andrea Adami <andrea.adami@gmail.com>
+Date: Fri, 23 Nov 2012 23:07:20 +0100
+Subject: [PATCH] ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock
+
+* Using pxa27x you could now build both RTC_DRV_PXA and RTC_DRV_SA1100.
+* Make sure you don't use both together: link /dev/rtc0 or /dev/rtc1
+* to /dev/rtc according to your requirement.
+
+Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
+Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
+Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
+
+Upstream-Status: Accepted. Committed in v3.9-rc1
+with commit id 495b21dc0e488b784ab1d4007d00db1ca2a95c98
+---
+ arch/arm/mach-pxa/pxa27x.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
+index 8047ee0..5970ebc 100644
+--- a/arch/arm/mach-pxa/pxa27x.c
++++ b/arch/arm/mach-pxa/pxa27x.c
+@@ -230,6 +230,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
+ INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
+ INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+ INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
++ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+ };
+
+ #ifdef CONFIG_PM
+--
+1.7.8.6
+
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
new file mode 100644
index 0000000..8e7c521
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
@@ -0,0 +1,135 @@
+From: Marko Katic <dromede.gmail.com>
+
+Here's an interesting scenario. The spitz machine has an
+Intersil 6271A voltage regulator and an ADS7846 touchscreen
+controller.
+
+The ADS7846 driver _requires_ the use of a voltage regulator
+or if not present, CONFIG_REGULATOR_DUMMY should be used for proper operation.
+This was made mandatory by the following commit:
+
+========================================
+91143379b01b2020d8878d627ebe9dfb9d6eb4c8
+Input: ads7846 - add regulator support
+
+The ADS7846/TSC2046 touchscreen controllers can (and usually are)
+connected to various regulators for power, so add regulator support.
+
+Valid regulator will now be required, so boards without complete
+regulator setup should either disable regulator framework or enable
+CONFIG_REGULATOR_DUMMY.
+========================================
+
+The ADS7846 in spitz machines is not connected to
+any power regulator so it needs CONFIG_REGULATOR_DUMMY enabled.
+So to support both the Intersil 6271A regulator and
+the ADS7846 controller, CONFIG_REGULATOR and CONFIG_REGULATOR_DUMMY have
+to be defined.
+
+However, enabling CONFIG_REGULATOR and CONFIG_REGULATOR_DUMMY
+will break pxamci driver and cause the following error output:
+
+pxa2xx-mci.0 supply vmmc not found, using dummy regulator
+pxa2xx-mci pxa2xx-mci.0: ocr_mask/setpower will not be used
+pxa2xx-mci pxa2xx-mci.0: could not set regulator OCR (-22)
+pxa2xx-mci pxa2xx-mci.0: unable to set power
+pxa2xx-mci pxa2xx-mci.0: could not set regulator OCR (-22)
+pxa2xx-mci pxa2xx-mci.0: unable to set power
+
+Above failures occur in two functions;
+pxamci_init_ocr() and pxamci_set_power().
+
+Regulator support in pxamci_init_ocr() is not
+written with the existence of the dummy regulator driver in
+mind. It does not check the return value of mmc_regulator_get_ocrmask()
+and it will only fall back to platform data if no regulator was found.
+
+pxamci_set_power() fails because it does not even try to fall back
+to platform data if mmc_regulator_set_ocr() fails. It
+expects a proper regulator or no regulator at all. It will
+only fall back to platform data if no regulator was found. It does
+not properly handle the possible existence of the dummy regulator.
+
+This patch refactors pxamci_init_ocr() and pxamci_set_power() regulator
+support to be more modular, to do more checks and to always fall back
+to platform data.
+
+Signed-off-by: Marko Katic <dromede@gmail.com>
+---
+ drivers/mmc/host/pxamci.c | 37 ++++++++++++++++++++++++-------------
+ 1 file changed, 24 insertions(+), 13 deletions(-)
+
+diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
+index 2b2f65a..6ec1566 100644
+--- a/drivers/mmc/host/pxamci.c
++++ b/drivers/mmc/host/pxamci.c
+@@ -83,18 +83,24 @@ struct pxamci_host {
+ static inline void pxamci_init_ocr(struct pxamci_host *host)
+ {
+ #ifdef CONFIG_REGULATOR
++ int ocr_mask;
+ host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+ if (IS_ERR(host->vcc))
+ host->vcc = NULL;
+ else {
+- host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+- if (host->pdata && host->pdata->ocr_mask)
++ ocr_mask = mmc_regulator_get_ocrmask(host->vcc);
++ if (ocr_mask <= 0)
++ host->mmc->ocr_avail = 0;
++ else
++ host->mmc->ocr_avail = ocr_mask;
++
++ if (host->pdata && host->pdata->ocr_mask && host->mmc->ocr_avail)
+ dev_warn(mmc_dev(host->mmc),
+ "ocr_mask/setpower will not be used\n");
+ }
+ #endif
+- if (host->vcc == NULL) {
++ if (host->vcc == NULL || host->mmc->ocr_avail == 0) {
+ /* fall-back to platform data */
+ host->mmc->ocr_avail = host->pdata ?
+ host->pdata->ocr_mask :
+@@ -108,26 +114,31 @@ static inline int pxamci_set_power(struct pxamci_host *host,
+ {
+ int on;
+
++#ifdef CONFIG_REGULATOR
+ if (host->vcc) {
+- int ret;
++ int ret = 0;
+
+- if (power_mode == MMC_POWER_UP) {
++ if (power_mode == MMC_POWER_UP)
+ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+- if (ret)
+- return ret;
+- } else if (power_mode == MMC_POWER_OFF) {
++
++ if (power_mode == MMC_POWER_OFF)
+ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
+- if (ret)
+- return ret;
+- }
++
++ if (ret == 0)
++ return 0;
++ else
++ dev_warn(mmc_dev(host->mmc),
++ "mmc_regulator_set_ocr failed, falling back to platform data\n");
+ }
+- if (!host->vcc && host->pdata &&
++#endif
++
++ if (host->pdata &&
+ gpio_is_valid(host->pdata->gpio_power)) {
+ on = ((1 << vdd) & host->pdata->ocr_mask);
+ gpio_set_value(host->pdata->gpio_power,
+ !!on ^ host->pdata->gpio_power_invert);
+ }
+- if (!host->vcc && host->pdata && host->pdata->setpower)
++ if (host->pdata && host->pdata->setpower)
+ host->pdata->setpower(mmc_dev(host->mmc), vdd);
+
+ return 0;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
new file mode 100644
index 0000000..c626e92
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
@@ -0,0 +1,24 @@
+Signed-off-by: Marko Katic <dromede.gmail.com>
+
+diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
+index d56c932..b70b13a 100644
+--- a/arch/arm/common/sharpsl_param.c
++++ b/arch/arm/common/sharpsl_param.c
+@@ -14,6 +14,7 @@
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
++#include <asm/memory.h>
+ #include <asm/mach/sharpsl_param.h>
+
+ /*
+@@ -41,7 +42,8 @@ EXPORT_SYMBOL(sharpsl_param);
+
+ void sharpsl_save_param(void)
+ {
+- memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
++ void * param_start = phys_to_virt(PARAM_BASE);
++ memcpy(&sharpsl_param, param_start, sizeof(struct sharpsl_param_info));
+
+ if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
+ sharpsl_param.comadj=-1;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
new file mode 100644
index 0000000..e20b597
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
@@ -0,0 +1,34 @@
+diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
+index dc25bee..b25fe27 100644
+--- a/drivers/spi/spi-pxa2xx.c
++++ b/drivers/spi/spi-pxa2xx.c
+@@ -106,6 +106,7 @@ struct driver_data {
+ int rx_channel;
+ int tx_channel;
+ u32 *null_dma_buf;
++ u8 null_dma_buf_unaligned[16];
+
+ /* SSP register addresses */
+ void __iomem *ioaddr;
+@@ -1543,8 +1544,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
+ return -ENODEV;
+ }
+
+- /* Allocate master with space for drv_data and null dma buffer */
+- master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
++ /* Allocate master with space for drv_data */
++ master = spi_alloc_master(dev, sizeof(struct driver_data));
+ if (!master) {
+ dev_err(&pdev->dev, "cannot alloc spi_master\n");
+ pxa_ssp_free(ssp);
+@@ -1569,8 +1570,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
+ master->transfer = transfer;
+
+ drv_data->ssp_type = ssp->type;
+- drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
+- sizeof(struct driver_data)), 8);
++ drv_data->null_dma_buf =
++ (u32 *)PTR_ALIGN(&drv_data->null_dma_buf_unaligned, 8);
+
+ drv_data->ioaddr = ssp->mmio_base;
+ drv_data->ssdr_physical = ssp->phys_base + SSDR;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
index cfe97be..35f1323 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
@@ -3,7 +3,7 @@ kconf hardware poodle.cfg
include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
-patch locomo_kbd_tweak-r2.patch
-patch sharpsl_param.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch b/recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
deleted file mode 100644
index 7cb5385..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From fcee0050f8ce5296e8007ed7ed17d98f334a8f38 Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami@gmail.com>
-Date: Fri, 23 Nov 2012 23:07:20 +0100
-Subject: [PATCH] ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock
-
-* Using pxa27x you could now build both RTC_DRV_PXA and RTC_DRV_SA1100.
-* Make sure you don't use both together: link /dev/rtc0 or /dev/rtc1
-* to /dev/rtc according to your requirement.
-
-Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
-Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
-Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
-
-Upstream-Status: Accepted. Committed in v3.9-rc1
-with commit id 495b21dc0e488b784ab1d4007d00db1ca2a95c98
----
- arch/arm/mach-pxa/pxa27x.c | 1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
-index 8047ee0..5970ebc 100644
---- a/arch/arm/mach-pxa/pxa27x.c
-+++ b/arch/arm/mach-pxa/pxa27x.c
-@@ -230,6 +230,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
- INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
- INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
- INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
- };
-
- #ifdef CONFIG_PM
---
-1.7.8.6
-
diff --git a/recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch b/recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch
deleted file mode 100644
index 8e7c521..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From: Marko Katic <dromede.gmail.com>
-
-Here's an interesting scenario. The spitz machine has an
-Intersil 6271A voltage regulator and an ADS7846 touchscreen
-controller.
-
-The ADS7846 driver _requires_ the use of a voltage regulator
-or if not present, CONFIG_REGULATOR_DUMMY should be used for proper operation.
-This was made mandatory by the following commit:
-
-========================================
-91143379b01b2020d8878d627ebe9dfb9d6eb4c8
-Input: ads7846 - add regulator support
-
-The ADS7846/TSC2046 touchscreen controllers can (and usually are)
-connected to various regulators for power, so add regulator support.
-
-Valid regulator will now be required, so boards without complete
-regulator setup should either disable regulator framework or enable
-CONFIG_REGULATOR_DUMMY.
-========================================
-
-The ADS7846 in spitz machines is not connected to
-any power regulator so it needs CONFIG_REGULATOR_DUMMY enabled.
-So to support both the Intersil 6271A regulator and
-the ADS7846 controller, CONFIG_REGULATOR and CONFIG_REGULATOR_DUMMY have
-to be defined.
-
-However, enabling CONFIG_REGULATOR and CONFIG_REGULATOR_DUMMY
-will break pxamci driver and cause the following error output:
-
-pxa2xx-mci.0 supply vmmc not found, using dummy regulator
-pxa2xx-mci pxa2xx-mci.0: ocr_mask/setpower will not be used
-pxa2xx-mci pxa2xx-mci.0: could not set regulator OCR (-22)
-pxa2xx-mci pxa2xx-mci.0: unable to set power
-pxa2xx-mci pxa2xx-mci.0: could not set regulator OCR (-22)
-pxa2xx-mci pxa2xx-mci.0: unable to set power
-
-Above failures occur in two functions;
-pxamci_init_ocr() and pxamci_set_power().
-
-Regulator support in pxamci_init_ocr() is not
-written with the existence of the dummy regulator driver in
-mind. It does not check the return value of mmc_regulator_get_ocrmask()
-and it will only fall back to platform data if no regulator was found.
-
-pxamci_set_power() fails because it does not even try to fall back
-to platform data if mmc_regulator_set_ocr() fails. It
-expects a proper regulator or no regulator at all. It will
-only fall back to platform data if no regulator was found. It does
-not properly handle the possible existence of the dummy regulator.
-
-This patch refactors pxamci_init_ocr() and pxamci_set_power() regulator
-support to be more modular, to do more checks and to always fall back
-to platform data.
-
-Signed-off-by: Marko Katic <dromede@gmail.com>
----
- drivers/mmc/host/pxamci.c | 37 ++++++++++++++++++++++++-------------
- 1 file changed, 24 insertions(+), 13 deletions(-)
-
-diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
-index 2b2f65a..6ec1566 100644
---- a/drivers/mmc/host/pxamci.c
-+++ b/drivers/mmc/host/pxamci.c
-@@ -83,18 +83,24 @@ struct pxamci_host {
- static inline void pxamci_init_ocr(struct pxamci_host *host)
- {
- #ifdef CONFIG_REGULATOR
-+ int ocr_mask;
- host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
-
- if (IS_ERR(host->vcc))
- host->vcc = NULL;
- else {
-- host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
-- if (host->pdata && host->pdata->ocr_mask)
-+ ocr_mask = mmc_regulator_get_ocrmask(host->vcc);
-+ if (ocr_mask <= 0)
-+ host->mmc->ocr_avail = 0;
-+ else
-+ host->mmc->ocr_avail = ocr_mask;
-+
-+ if (host->pdata && host->pdata->ocr_mask && host->mmc->ocr_avail)
- dev_warn(mmc_dev(host->mmc),
- "ocr_mask/setpower will not be used\n");
- }
- #endif
-- if (host->vcc == NULL) {
-+ if (host->vcc == NULL || host->mmc->ocr_avail == 0) {
- /* fall-back to platform data */
- host->mmc->ocr_avail = host->pdata ?
- host->pdata->ocr_mask :
-@@ -108,26 +114,31 @@ static inline int pxamci_set_power(struct pxamci_host *host,
- {
- int on;
-
-+#ifdef CONFIG_REGULATOR
- if (host->vcc) {
-- int ret;
-+ int ret = 0;
-
-- if (power_mode == MMC_POWER_UP) {
-+ if (power_mode == MMC_POWER_UP)
- ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
-- if (ret)
-- return ret;
-- } else if (power_mode == MMC_POWER_OFF) {
-+
-+ if (power_mode == MMC_POWER_OFF)
- ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
-- if (ret)
-- return ret;
-- }
-+
-+ if (ret == 0)
-+ return 0;
-+ else
-+ dev_warn(mmc_dev(host->mmc),
-+ "mmc_regulator_set_ocr failed, falling back to platform data\n");
- }
-- if (!host->vcc && host->pdata &&
-+#endif
-+
-+ if (host->pdata &&
- gpio_is_valid(host->pdata->gpio_power)) {
- on = ((1 << vdd) & host->pdata->ocr_mask);
- gpio_set_value(host->pdata->gpio_power,
- !!on ^ host->pdata->gpio_power_invert);
- }
-- if (!host->vcc && host->pdata && host->pdata->setpower)
-+ if (host->pdata && host->pdata->setpower)
- host->pdata->setpower(mmc_dev(host->mmc), vdd);
-
- return 0;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch b/recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
deleted file mode 100644
index c626e92..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-Signed-off-by: Marko Katic <dromede.gmail.com>
-
-diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
-index d56c932..b70b13a 100644
---- a/arch/arm/common/sharpsl_param.c
-+++ b/arch/arm/common/sharpsl_param.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/string.h>
-+#include <asm/memory.h>
- #include <asm/mach/sharpsl_param.h>
-
- /*
-@@ -41,7 +42,8 @@ EXPORT_SYMBOL(sharpsl_param);
-
- void sharpsl_save_param(void)
- {
-- memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
-+ void * param_start = phys_to_virt(PARAM_BASE);
-+ memcpy(&sharpsl_param, param_start, sizeof(struct sharpsl_param_info));
-
- if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
- sharpsl_param.comadj=-1;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch b/recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
deleted file mode 100644
index e20b597..0000000
--- a/recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
-index dc25bee..b25fe27 100644
---- a/drivers/spi/spi-pxa2xx.c
-+++ b/drivers/spi/spi-pxa2xx.c
-@@ -106,6 +106,7 @@ struct driver_data {
- int rx_channel;
- int tx_channel;
- u32 *null_dma_buf;
-+ u8 null_dma_buf_unaligned[16];
-
- /* SSP register addresses */
- void __iomem *ioaddr;
-@@ -1543,8 +1544,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
- return -ENODEV;
- }
-
-- /* Allocate master with space for drv_data and null dma buffer */
-- master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
-+ /* Allocate master with space for drv_data */
-+ master = spi_alloc_master(dev, sizeof(struct driver_data));
- if (!master) {
- dev_err(&pdev->dev, "cannot alloc spi_master\n");
- pxa_ssp_free(ssp);
-@@ -1569,8 +1570,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
- master->transfer = transfer;
-
- drv_data->ssp_type = ssp->type;
-- drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
-- sizeof(struct driver_data)), 8);
-+ drv_data->null_dma_buf =
-+ (u32 *)PTR_ALIGN(&drv_data->null_dma_buf_unaligned, 8);
-
- drv_data->ioaddr = ssp->mmio_base;
- drv_data->ssdr_physical = ssp->phys_base + SSDR;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
index be8c470..c47a0c5 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
@@ -4,7 +4,7 @@ include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
include ../zaurus-usb-host.scc
-patch sharpsl_param.patch
-patch pxa27x-sa1100-rtc.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/pxa27x-sa1100-rtc.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
index b4d6e8e..4d57894 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
@@ -4,6 +4,6 @@ include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
include ../zaurus-usb-host.scc
-patch sharpsl_param.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
--
1.8.1.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [meta-handheld][PATCH 2/2] linux-yocto_3.8: patches: add Upstream-Status and do minor edits
2013-04-18 23:52 [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs Andrea Adami
@ 2013-04-18 23:52 ` Andrea Adami
2013-04-19 0:07 ` [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs Martin Jansa
2013-04-19 22:12 ` [meta-handheld][PATCH 1/2 v2] " Andrea Adami
2 siblings, 0 replies; 4+ messages in thread
From: Andrea Adami @ 2013-04-18 23:52 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
---
.../patches-locomokbd/locomo_kbd_tweak-r2.patch | 3 ++
.../patches/patches-mfd/mcp-device.patch | 35 ++++++++++++++++++++++
.../patches/patches-mtd/collie-eraseinfo.patch | 11 +++++++
.../patches/patches-mtd/collie-jedec-probe.patch | 11 +++++++
.../patches/patches-pxa/pxa27x-sa1100-rtc.patch | 8 ++---
.../patches/patches-pxa/pxamci-regulator.patch | 3 ++
.../patches/patches-pxa/sharpsl_param.patch | 14 +++++++++
.../patches/patches-pxa/spi-pxa2xx-fix-mem.patch | 13 ++++++++
8 files changed, 93 insertions(+), 5 deletions(-)
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
index 5f015f4..0ba313a 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
@@ -8,6 +8,9 @@ Subject: [PATCH 43/43] locomokbd: apply tweaks for Zaurus
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
+Upstream-Status: Inappropriate [embedded specific]
+[Patch needed for initramfs w/out keymaps like kexecboot]
+
diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
index c94d610..2b978c8 100644
--- a/drivers/input/keyboard/locomokbd.c
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
index 9a0a8ba..9769b2d 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
@@ -1,3 +1,38 @@
+Initial try to fix compilation error
+
+linux/include/linux/mfd/mcp.h:22:16: error: field 'attached_device' has incomplete type
+linux/include/linux/mfd/mcp.h:48:23: error: field 'drv' has incomplete type
+linux/include/linux/mfd/ucb1x00.h:137:17: error: field 'dev' has incomplete type
+linux/drivers/power/collie_battery.c:290:56: error: unknown type name 'pm_message_t'
+linux/drivers/power/collie_battery.c:371:13: error: 'collie_bat_suspend' undeclared here (not in a function)
+| make[4]: *** [drivers/power/collie_battery.o] Error 1
+| make[3]: *** [drivers/power] Error 2
+
+Patch should be refactored following Anton's suggestions.
+"Generally, we don't depend on indirect inclusions. But if it doesn't harm
+anyhow so far, we may not bother with this."
+
+Here the suggestion:
+
+Things are a bit more complex...
+* linux/include/linux/mfd/mcp.h:22:16: error: field 'attached_device' has incomplete type
+
+You have to add #include <linux/device.h> into mfd/mcp.h. This will add
+struct device and...
+
+* linux/include/linux/mfd/mcp.h:48:23: error: field 'drv' has incomplete type
+ struct device_driver.
+
+* linux/include/linux/mfd/ucb1x00.h:137:17: error: field 'dev' has incomplete type
+Same here, the file ucb1x00.h needs #include <linux/device.h>.
+
+* linux/drivers/power/collie_battery.c:290:56: error: unknown type name 'pm_message_t'
+#include <linux/pm.h> into collie_battery.c
+
+Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
+
+Upstream-Status: Pending
+
--- a/include/linux/mfd/mcp.h 2013-02-18 00:14:09.000000000 +0100
+++ b/include/linux/mfd/mcp.h 2013-02-17 23:55:52.000000000 +0100
@@ -10,6 +10,8 @@
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
index 6aba29e..b5f9916 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
@@ -1,3 +1,14 @@
+* Zaurus 5500 contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16) and
+* the LH28F640BFHE-PTTL90.pdf datasheet available on the net shows
+* the exact erasesize and the OTP support.
+* At the moment only jedec_probe can discover the chip and
+* the NOR is mounted read only probably because of wrong vpp
+
+Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
+
+Upstream-Status: Submitted
+http://lists.infradead.org/pipermail/linux-mtd/2013-February/045781.html
+
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -120,7 +120,7 @@
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
index 530643e..64f58ce 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
@@ -1,3 +1,14 @@
+* Zaurus 5500 contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16) and
+* the LH28F640BFHE-PTTL90.pdf datasheet available on the net shows
+* the exact erasesize and the OTP support.
+* At the moment only jedec_probe can discover the chip and
+* the NOR is mounted read only probably because of wrong vpp
+
+Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
+
+Upstream-Status: Submitted
+http://lists.infradead.org/pipermail/linux-mtd/2013-February/045781.html
+
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -289,7 +289,7 @@
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
index 7cb5385..d878ea1 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
@@ -11,8 +11,9 @@ Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
-Upstream-Status: Accepted. Committed in v3.9-rc1
-with commit id 495b21dc0e488b784ab1d4007d00db1ca2a95c98
+Upstream-Status: Accepted
+Committed in v3.9-rc1 with commit id
+495b21dc0e488b784ab1d4007d00db1ca2a95c98
---
arch/arm/mach-pxa/pxa27x.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
@@ -29,6 +30,3 @@ index 8047ee0..5970ebc 100644
};
#ifdef CONFIG_PM
---
-1.7.8.6
-
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
index 8e7c521..daf086a 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
@@ -55,6 +55,9 @@ support to be more modular, to do more checks and to always fall back
to platform data.
Signed-off-by: Marko Katic <dromede@gmail.com>
+
+Upstream-Status: Submitted
+https://patchwork.kernel.org/patch/1875561/
---
drivers/mmc/host/pxamci.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
index c626e92..720a87c 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
@@ -1,5 +1,19 @@
+* Unbreak kernel boot (tested with kexecboot)
+* Patch was sent twice upstrream:
+* http://lists.infradead.org/pipermail/linux-arm-kernel/2012-December/137284.html
+*
+* Devices that call sharpsl_save_param() will hang on boot due to
+* a memcpy call that uses a physical address that is no longer
+* accessible. Fix this by converting the physical address into a virtual one.
+
Signed-off-by: Marko Katic <dromede.gmail.com>
+Upstream-Status: Submitted
+https://patchwork.kernel.org/patch/1818681/
+---
+ arch/arm/common/sharpsl_param.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index d56c932..b70b13a 100644
--- a/arch/arm/common/sharpsl_param.c
diff --git a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
index e20b597..7fbc14c 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+++ b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
@@ -1,3 +1,16 @@
+pxa2xx_spi_probe allocates struct driver_data and null_dma_buf
+at same time via spi_alloc_master(), but then calculates
+null_dma_buf pointer incorrectly, and it causes memory corruption
+later if DMA usage is enabled.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+
+Upstream-Status: Submitted
+https://patchwork.kernel.org/patch/1657911/
+---
+ drivers/spi/spi-pxa2xx.c | 9 +++++----
+ 1 file changed, 5 insertions(+), 4 deletions(-)
+
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index dc25bee..b25fe27 100644
--- a/drivers/spi/spi-pxa2xx.c
--
1.8.1.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs
2013-04-18 23:52 [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs Andrea Adami
2013-04-18 23:52 ` [meta-handheld][PATCH 2/2] linux-yocto_3.8: patches: add Upstream-Status and do minor edits Andrea Adami
@ 2013-04-19 0:07 ` Martin Jansa
2013-04-19 22:12 ` [meta-handheld][PATCH 1/2 v2] " Andrea Adami
2 siblings, 0 replies; 4+ messages in thread
From: Martin Jansa @ 2013-04-19 0:07 UTC (permalink / raw)
To: openembedded-devel
[-- Attachment #1: Type: text/plain, Size: 3207 bytes --]
On Fri, Apr 19, 2013 at 01:52:06AM +0200, Andrea Adami wrote:
> Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
> ---
> .../linux/linux-yocto-3.8/akita/akita.scc | 8 +-
> recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 6 +-
> .../linux/linux-yocto-3.8/collie-eraseinfo.patch | 31 -----
> .../linux/linux-yocto-3.8/collie-jedec-probe.patch | 11 --
> .../linux/linux-yocto-3.8/collie/collie.scc | 8 +-
> .../linux-yocto-3.8/locomo_kbd_tweak-r2.patch | 75 ------------
> .../linux/linux-yocto-3.8/mcp-device.patch | 13 --
> .../patches-locomokbd/locomo_kbd_tweak-r2.patch | 75 ++++++++++++
> .../patches/patches-mfd/mcp-device.patch | 13 ++
> .../patches/patches-mtd/collie-eraseinfo.patch | 31 +++++
> .../patches/patches-mtd/collie-jedec-probe.patch | 11 ++
> .../patches/patches-pxa/pxa27x-sa1100-rtc.patch | 34 ++++++
> .../patches/patches-pxa/pxamci-regulator.patch | 135 +++++++++++++++++++++
> .../patches/patches-pxa/sharpsl_param.patch | 24 ++++
> .../patches/patches-pxa/spi-pxa2xx-fix-mem.patch | 34 ++++++
> .../linux/linux-yocto-3.8/poodle/poodle.scc | 8 +-
> .../linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch | 34 ------
> .../linux/linux-yocto-3.8/pxamci-regulator.patch | 135 ---------------------
> .../linux/linux-yocto-3.8/sharpsl_param.patch | 24 ----
> .../linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch | 34 ------
> .../linux/linux-yocto-3.8/spitz/spitz.scc | 8 +-
> recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 6 +-
> 22 files changed, 379 insertions(+), 379 deletions(-)
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
> create mode 100644 recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
Would be nice to send this with -M.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* [meta-handheld][PATCH 1/2 v2] linux-yocto_3.8: move Zaurus patches to the respective subdirs
2013-04-18 23:52 [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs Andrea Adami
2013-04-18 23:52 ` [meta-handheld][PATCH 2/2] linux-yocto_3.8: patches: add Upstream-Status and do minor edits Andrea Adami
2013-04-19 0:07 ` [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs Martin Jansa
@ 2013-04-19 22:12 ` Andrea Adami
2 siblings, 0 replies; 4+ messages in thread
From: Andrea Adami @ 2013-04-19 22:12 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
---
recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc | 8 ++++----
recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 6 +++---
recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc | 8 ++++----
.../{ => patches/patches-locomokbd}/locomo_kbd_tweak-r2.patch | 0
.../linux-yocto-3.8/{ => patches/patches-mfd}/mcp-device.patch | 0
.../{ => patches/patches-mtd}/collie-eraseinfo.patch | 0
.../{ => patches/patches-mtd}/collie-jedec-probe.patch | 0
.../{ => patches/patches-pxa}/pxa27x-sa1100-rtc.patch | 0
.../{ => patches/patches-pxa}/pxamci-regulator.patch | 0
.../linux-yocto-3.8/{ => patches/patches-pxa}/sharpsl_param.patch | 0
.../{ => patches/patches-pxa}/spi-pxa2xx-fix-mem.patch | 0
recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc | 8 ++++----
recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc | 8 ++++----
recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 6 +++---
14 files changed, 22 insertions(+), 22 deletions(-)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-locomokbd}/locomo_kbd_tweak-r2.patch (100%)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-mfd}/mcp-device.patch (100%)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-mtd}/collie-eraseinfo.patch (100%)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-mtd}/collie-jedec-probe.patch (100%)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-pxa}/pxa27x-sa1100-rtc.patch (100%)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-pxa}/pxamci-regulator.patch (100%)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-pxa}/sharpsl_param.patch (100%)
rename recipes-kernel/linux/linux-yocto-3.8/{ => patches/patches-pxa}/spi-pxa2xx-fix-mem.patch (100%)
diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
index b40cb7e..001b11b 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
@@ -5,7 +5,7 @@ include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
include ../zaurus-usb-host.scc
-patch sharpsl_param.patch
-patch pxa27x-sa1100-rtc.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/pxa27x-sa1100-rtc.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
index a732d5e..edb99b6 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
@@ -3,6 +3,6 @@ kconf hardware c7x0.cfg
include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
-patch sharpsl_param.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
index 3f96f24..857586e 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
@@ -2,7 +2,7 @@ kconf hardware collie.cfg
include ../zaurus-common.scc
-patch locomo_kbd_tweak-r2.patch
-patch mcp-device.patch
-patch collie-jedec-probe.patch
-patch collie-eraseinfo.patch
+patch ../patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
+patch ../patches/patches-mfd/mcp-device.patch
+patch ../patches/patches-mtd/collie-jedec-probe.patch
+patch ../patches/patches-mtd/collie-eraseinfo.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-mfd/mcp-device.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-eraseinfo.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-mtd/collie-jedec-probe.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxa27x-sa1100-rtc.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/sharpsl_param.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch b/recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
similarity index 100%
rename from recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
rename to recipes-kernel/linux/linux-yocto-3.8/patches/patches-pxa/spi-pxa2xx-fix-mem.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
index cfe97be..35f1323 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
@@ -3,7 +3,7 @@ kconf hardware poodle.cfg
include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
-patch locomo_kbd_tweak-r2.patch
-patch sharpsl_param.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
index be8c470..c47a0c5 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
@@ -4,7 +4,7 @@ include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
include ../zaurus-usb-host.scc
-patch sharpsl_param.patch
-patch pxa27x-sa1100-rtc.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/pxa27x-sa1100-rtc.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
index b4d6e8e..4d57894 100644
--- a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
+++ b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
@@ -4,6 +4,6 @@ include ../zaurus-pxa-only.scc
include ../zaurus-common.scc
include ../zaurus-usb-host.scc
-patch sharpsl_param.patch
-patch spi-pxa2xx-fix-mem.patch
-patch pxamci-regulator.patch
+patch ../patches/patches-pxa/sharpsl_param.patch
+patch ../patches/patches-pxa/spi-pxa2xx-fix-mem.patch
+patch ../patches/patches-pxa/pxamci-regulator.patch
--
1.8.1.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-04-19 22:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-18 23:52 [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs Andrea Adami
2013-04-18 23:52 ` [meta-handheld][PATCH 2/2] linux-yocto_3.8: patches: add Upstream-Status and do minor edits Andrea Adami
2013-04-19 0:07 ` [meta-handheld][PATCH 1/2] linux-yocto_3.8: move Zaurus patches to the respective subdirs Martin Jansa
2013-04-19 22:12 ` [meta-handheld][PATCH 1/2 v2] " Andrea Adami
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.