From: Olaf Hering <olaf@aepfle.de>
To: xen-devel@lists.xen.org
Subject: guest crash in wrmsr_hypervisor_regs if hypercall page is paged out
Date: Tue, 30 Apr 2013 20:19:17 +0200 [thread overview]
Message-ID: <20130430181917.GA13893@aepfle.de> (raw)
With current xen-unstable I see this guest crash if the gfn 169ff is
paged out. The xenpaging -v output shows that 169ff is populated, but
appearently wrmsr_hypervisor_regs does not like the resulting mfn?!
...
(XEN) HVM10: HVM Loader
(XEN) HVM10: Detected Xen v4.3.26939-20130430
(XEN) HVM10: Xenbus rings @0xfeffc000, event channel 6
(XEN) HVM10: System requested SeaBIOS
(XEN) HVM10: CPU speed is 2926 MHz
(XEN) irq.c:270: Dom10 PCI link 0 changed 0 -> 5
(XEN) HVM10: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:270: Dom10 PCI link 1 changed 0 -> 10
(XEN) HVM10: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:270: Dom10 PCI link 2 changed 0 -> 11
(XEN) HVM10: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:270: Dom10 PCI link 3 changed 0 -> 5
(XEN) HVM10: PCI-ISA link 3 routed to IRQ5
(XEN) HVM10: pci dev 01:2 INTD->IRQ5
(XEN) HVM10: pci dev 01:3 INTA->IRQ10
(XEN) HVM10: pci dev 03:0 INTA->IRQ5
(XEN) HVM10: pci dev 02:0 bar 10 size lx: 02000000
(XEN) HVM10: pci dev 03:0 bar 14 size lx: 01000000
(XEN) HVM10: pci dev 02:0 bar 30 size lx: 00010000
(XEN) HVM10: pci dev 02:0 bar 14 size lx: 00001000
(XEN) HVM10: pci dev 03:0 bar 10 size lx: 00000100
(XEN) HVM10: pci dev 01:2 bar 20 size lx: 00000020
(XEN) HVM10: pci dev 01:1 bar 20 size lx: 00000010
(XEN) HVM10: Multiprocessor initialisation:
(XEN) HVM10: - CPU0 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) HVM10: - CPU1 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) HVM10: - CPU2 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) HVM10: - CPU3 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(XEN) HVM10: Testing HVM environment:
(XEN) HVM10: - REP INSB across page boundaries ... passed
(XEN) HVM10: - GS base MSRs and SWAPGS ... passed
(XEN) HVM10: Passed 2 of 2 tests
(XEN) HVM10: Writing SMBIOS tables ...
(XEN) HVM10: Loading SeaBIOS ...
(XEN) HVM10: Creating MP tables ...
(XEN) HVM10: Loading ACPI ...
(XEN) HVM10: vm86 TSS at fc00a100
(XEN) HVM10: BIOS map:
(XEN) HVM10: 10000-100d3: Scratch space
(XEN) HVM10: e0000-fffff: Main BIOS
(XEN) HVM10: E820 table:
(XEN) HVM10: [00]: 00000000:00000000 - 00000000:000a0000: RAM
(XEN) HVM10: HOLE: 00000000:000a0000 - 00000000:000e0000
(XEN) HVM10: [01]: 00000000:000e0000 - 00000000:00100000: RESERVED
(XEN) HVM10: [02]: 00000000:00100000 - 00000000:16a00000: RAM
(XEN) HVM10: HOLE: 00000000:16a00000 - 00000000:fc000000
(XEN) HVM10: [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(XEN) HVM10: Invoking SeaBIOS ...
(XEN) HVM10: SeaBIOS (version ?-20130430_174224-bax)
(XEN) HVM10:
(XEN) HVM10: Found Xen hypervisor signature at 40000000
(XEN) HVM10: xen: copy e820...
(XEN) HVM10: Ram Size=0x16a00000 (0x0000000000000000 high)
(XEN) HVM10: Relocating low data from 0x000e2490 to 0x000ef790 (size 2156)
(XEN) HVM10: Relocating init from 0x000e2cfc to 0x169e20f0 (size 56804)
(XEN) HVM10: CPU Mhz=2928
(XEN) HVM10: Found 7 PCI devices (max PCI bus is 00)
(XEN) HVM10: Allocated Xen hypercall page at 169ff000
(XEN) traps.c:654:d10 Bad GMFN 169ff (MFN 3e900000000) to MSR 40000000
(XEN) HVM10: Detected Xen v4.3
(XEN) io.c:201:d10 MMIO emulation failed @ 0008:c2c2c2c2: 18 7c 55 6d 03 83 ff ff 10 7c
(XEN) hvm.c:1253:d10 Triple fault on VCPU0 - invoking HVM shutdown action 1.
(XEN) HVM11: HVM Loader
(XEN) HVM11: Detected Xen v4.3.26939-20130430
...
The .cfg file looks like this:
name="12.3_full_default2"
uuid="3c8c0937-cb46-4fe9-a871-8e4c60ab8dfe"
memory=370
vcpus=4
serial="pty"
builder="hvm"
boot="dc"
disk=[
'file:/some.vdisk,hda,w',
'file:/some.iso,hdc:cdrom,r',
]
vif=[
'bridge=br0,type=netfront'
]
vfb = [
'type=vnc,vncunused=1,keymap=de'
]
usb=1
usbdevice='tablet'
I'm using "xl -v -v create -d -p -f domU.cfg" to start it, then run xenpaging
manually, then unpause the guest.
Olaf
next reply other threads:[~2013-04-30 18:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-30 18:19 Olaf Hering [this message]
2013-05-02 11:20 ` guest crash in wrmsr_hypervisor_regs if hypercall page is paged out Tim Deegan
2013-05-02 14:43 ` Olaf Hering
2013-05-02 14:52 ` Tim Deegan
2013-05-02 14:58 ` Jan Beulich
2013-05-02 15:20 ` Olaf Hering
2013-05-02 15:29 ` Jan Beulich
2013-05-02 17:46 ` Olaf Hering
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130430181917.GA13893@aepfle.de \
--to=olaf@aepfle.de \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.