[PATCH V2] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST

[PATCH V2] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST

[Julien Grall]

Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by
default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call
irq_startup, that is responsible for calling irq_unmask at startup time.
As a result event channels remain masked.

The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was
missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init.

On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit
doesn't impact this architecture.

Signed-off-by: Julien Grall <julien.grall@linaro.org>
---
 Changes since v1:
   - Specify this commit will not impact x86 in the comment
   - Clear flag directly in xen_irq_info_common_init, this function is
   called by all bind_*_to_irq

 drivers/xen/events.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index d8cc812..6a6bbe4 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -167,6 +167,8 @@ static void xen_irq_info_common_init(struct irq_info *info,
 	info->cpu = cpu;
 
 	evtchn_to_irq[evtchn] = irq;
+
+	irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
 }
 
 static void xen_irq_info_evtchn_init(unsigned irq,
@@ -874,7 +876,6 @@ int bind_evtchn_to_irq(unsigned int evtchn)
 		struct irq_info *info = info_for_irq(irq);
 		WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
 	}
-	irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
 
 out:
 	mutex_unlock(&irq_mapping_update_lock);
-- 
1.7.10.4

Re: [PATCH V2] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST

[Stefano Stabellini]

Konrad, are you going to take care of this patch (assuming that you are
OK with it)?

On Tue, 30 Apr 2013, Julien Grall wrote:
> Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by
> default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call
> irq_startup, that is responsible for calling irq_unmask at startup time.
> As a result event channels remain masked.
> 
> The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was
> missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init.
> 
> On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit
> doesn't impact this architecture.
> 
> Signed-off-by: Julien Grall <julien.grall@linaro.org>

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>


>  Changes since v1:
>    - Specify this commit will not impact x86 in the comment
>    - Clear flag directly in xen_irq_info_common_init, this function is
>    called by all bind_*_to_irq
> 
>  drivers/xen/events.c |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/xen/events.c b/drivers/xen/events.c
> index d8cc812..6a6bbe4 100644
> --- a/drivers/xen/events.c
> +++ b/drivers/xen/events.c
> @@ -167,6 +167,8 @@ static void xen_irq_info_common_init(struct irq_info *info,
>  	info->cpu = cpu;
>  
>  	evtchn_to_irq[evtchn] = irq;
> +
> +	irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
>  }
>  
>  static void xen_irq_info_evtchn_init(unsigned irq,
> @@ -874,7 +876,6 @@ int bind_evtchn_to_irq(unsigned int evtchn)
>  		struct irq_info *info = info_for_irq(irq);
>  		WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
>  	}
> -	irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
>  
>  out:
>  	mutex_unlock(&irq_mapping_update_lock);
> -- 
> 1.7.10.4
> 

Re: [PATCH V2] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST

[Konrad Rzeszutek Wilk]

On Tue, Apr 30, 2013 at 06:34:52PM +0100, Stefano Stabellini wrote:
> Konrad, are you going to take care of this patch (assuming that you are
> OK with it)?

Yes. Will push it around rc1.

> 
> On Tue, 30 Apr 2013, Julien Grall wrote:
> > Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by
> > default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call
> > irq_startup, that is responsible for calling irq_unmask at startup time.
> > As a result event channels remain masked.
> > 
> > The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was
> > missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init.
> > 
> > On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit
> > doesn't impact this architecture.
> > 
> > Signed-off-by: Julien Grall <julien.grall@linaro.org>
> 
> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
> 
> 
> >  Changes since v1:
> >    - Specify this commit will not impact x86 in the comment
> >    - Clear flag directly in xen_irq_info_common_init, this function is
> >    called by all bind_*_to_irq
> > 
> >  drivers/xen/events.c |    3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/xen/events.c b/drivers/xen/events.c
> > index d8cc812..6a6bbe4 100644
> > --- a/drivers/xen/events.c
> > +++ b/drivers/xen/events.c
> > @@ -167,6 +167,8 @@ static void xen_irq_info_common_init(struct irq_info *info,
> >  	info->cpu = cpu;
> >  
> >  	evtchn_to_irq[evtchn] = irq;
> > +
> > +	irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
> >  }
> >  
> >  static void xen_irq_info_evtchn_init(unsigned irq,
> > @@ -874,7 +876,6 @@ int bind_evtchn_to_irq(unsigned int evtchn)
> >  		struct irq_info *info = info_for_irq(irq);
> >  		WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
> >  	}
> > -	irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
> >  
> >  out:
> >  	mutex_unlock(&irq_mapping_update_lock);
> > -- 
> > 1.7.10.4
> >