[ANN] Freescale Community BSP - Test Form 1.4 Results

[ANN] Freescale Community BSP - Test Form 1.4 Results

[Otavio Salvador]

Hello,

As previously announced[1], we kept the test form open until last Friday.

1. https://lists.yoctoproject.org/pipermail/meta-freescale/2013-April/002425.html

In total we had 18 submissions and 8 different boards tested. It
exposed some issues, which were fixed or added to the release notes as
known issues.

I’d like to thank the people  who contributed to the test and helped
to trace the issues which had been found.

Regards,

--
Otavio Salvador                             O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br

Re: [ANN] Freescale Community BSP - Test Form 1.4 Results

[Eric Bénard]

Hi Otavio,

Le Mon, 13 May 2013 10:27:18 -0300,
Otavio Salvador <otavio@ossystems.com.br> a écrit :
> As previously announced[1], we kept the test form open until last Friday.
> 
> 1. https://lists.yoctoproject.org/pipermail/meta-freescale/2013-April/002425.html
> 
> In total we had 18 submissions and 8 different boards tested. It
> exposed some issues, which were fixed or added to the release notes as
> known issues.
> 
> I’d like to thank the people  who contributed to the test and helped
> to trace the issues which had been found.
> 
FWIW, I've just tested a PCIe USB3 board on SabreLite and that works
fine (once the xHCI HCD is enabled in the defconfig).
Would you take a patch enabling the driver in the defconfig or is that
to specific ?

Eric

Re: [ANN] Freescale Community BSP - Test Form 1.4 Results

[Otavio Salvador]

On Mon, May 13, 2013 at 1:44 PM, Eric Bénard <eric@eukrea.com> wrote:
> Hi Otavio,
>
> Le Mon, 13 May 2013 10:27:18 -0300,
> Otavio Salvador <otavio@ossystems.com.br> a écrit :
>> As previously announced[1], we kept the test form open until last Friday.
>>
>> 1. https://lists.yoctoproject.org/pipermail/meta-freescale/2013-April/002425.html
>>
>> In total we had 18 submissions and 8 different boards tested. It
>> exposed some issues, which were fixed or added to the release notes as
>> known issues.
>>
>> I’d like to thank the people  who contributed to the test and helped
>> to trace the issues which had been found.
>>
> FWIW, I've just tested a PCIe USB3 board on SabreLite and that works
> fine (once the xHCI HCD is enabled in the defconfig).
> Would you take a patch enabling the driver in the defconfig or is that
> to specific ?

I think it'd be acceptable as it wouldn't hurt of someone does not uses it.

--
Otavio Salvador                             O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br