* [PATCH 2/5] clk: hi3xxx: add clock support
2013-04-19 10:49 [PATCH 1/5] ARM: debug: support debug ll on hisilicon soc Haojian Zhuang
@ 2013-04-19 10:49 ` Haojian Zhuang
2013-05-13 19:47 ` Mike Turquette
2013-04-19 10:49 ` [PATCH 3/5] ARM: hi3xxx: add board support with device tree Haojian Zhuang
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Haojian Zhuang @ 2013-04-19 10:49 UTC (permalink / raw)
To: linux-arm-kernel
Add clock support with device tree on Hisilicon SoC.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
---
.../devicetree/bindings/clock/hisilicon.txt | 73 +++
drivers/clk/Makefile | 1 +
drivers/clk/clk-hi3xxx.c | 641 ++++++++++++++++++++
3 files changed, 715 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/hisilicon.txt
create mode 100644 drivers/clk/clk-hi3xxx.c
diff --git a/Documentation/devicetree/bindings/clock/hisilicon.txt b/Documentation/devicetree/bindings/clock/hisilicon.txt
new file mode 100644
index 0000000..49ed081
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisilicon.txt
@@ -0,0 +1,73 @@
+Device Tree Clock bindings for arch-hi3xxx
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties for mux clocks:
+ - compatible : Shall be "hisilicon,hi3620-clk-mux".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - hisilicon,hi3620-mux : array of mux register offset & mask bits
+
+Required properties for Hi3620 gate clocks:
+ - compatible : Shall be "hisilicon,hi3620-clk-gate".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - hisilicon,hi3620-clkgate : array of enable register offset & enable bits
+ - hisilicon,hi3620-clkreset : array of reset register offset & enable bits
+
+Required properties for clock divider:
+ - compatible : Shall be "hisilicon,hi3620-clk-div".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - #hisilicon,clkdiv-table-cells : the number of parameters after phandle in
+ hisilicon,clkdiv-table property.
+ - hisilicon,clkdiv-table : list of value that are used to configure clock
+ divider. They're value of phandle, index & divider value.
+ - hisilicon,clkdiv : array of divider register offset & mask bits.
+
+Required properties for gate clocks:
+ - compatible : Shall be "hisilicon,clk-gate".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - hisilicon,clkgate-inverted : bool value. True means that set-to-disable.
+
+Required properties for clock fixed factor divider:
+ - compatible : Shall be "hisilicon,fixed-factor".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - hisilicon,fixed-factor : array of multiplier & divider.
+
+For example:
+ timclk1: clkgate at 38 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer1>;
+ clock-output-names = "timclk1";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 18>;
+ };
+
+ dtable: clkdiv at 0 {
+ #hisilicon,clkdiv-table-cells = <2>;
+ };
+
+ div_cfgaxi: clkdiv at 2 {
+ compatible = "hisilicon,hi3620-clk-div";
+ #clock-cells = <0>;
+ clocks = <&div_shareaxi>;
+ clock-output-names = "cfgAXI_div";
+ hisilicon,clkdiv-table = <&dtable 0x01 2>;
+ hisilicon,clkdiv = <0x100 0x60>;
+ };
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 300d477..852e5c2 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-mux.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
+obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3xxx.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
diff --git a/drivers/clk/clk-hi3xxx.c b/drivers/clk/clk-hi3xxx.c
new file mode 100644
index 0000000..e93e583
--- /dev/null
+++ b/drivers/clk/clk-hi3xxx.c
@@ -0,0 +1,641 @@
+/*
+ * Hisilicon clock driver
+ *
+ * Copyright (c) 2012-2013 Hisilicon Limited.
+ * Copyright (c) 2012-2013 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ * Xin Li <li.xin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#define HI3620_DISABLE_OFF 0x4
+#define HI3620_STATUS_OFF 0x8
+
+#define WIDTH_TO_MASK(width) ((1 << (width)) - 1)
+
+/*
+ * The reverse of DIV_ROUND_UP: The maximum number which
+ * divided by m is r
+ */
+#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
+
+struct hi3620_periclk {
+ struct clk_hw hw;
+ void __iomem *enable; /* enable register */
+ void __iomem *reset; /* reset register */
+ u32 ebits; /* bits in enable/disable register */
+ u32 rbits; /* bits in reset/unreset register */
+ spinlock_t *lock;
+};
+
+struct hi3620_muxclk {
+ struct clk_hw hw;
+ void __iomem *reg; /* mux register */
+ u8 shift;
+ u8 width;
+ u32 mbits; /* mask bits in mux register */
+ spinlock_t *lock;
+};
+
+struct hi3620_divclk {
+ struct clk_hw hw;
+ void __iomem *reg; /* divider register */
+ u8 shift;
+ u8 width;
+ u32 mbits; /* mask bits in divider register */
+ const struct clk_div_table *table;
+ spinlock_t *lock;
+};
+
+struct hs_clk {
+ void __iomem *pmctrl;
+ void __iomem *sctrl;
+ spinlock_t lock;
+};
+
+static struct hs_clk hs_clk;
+
+static void __init hs_init_clocks(void)
+{
+ struct device_node *node = NULL;
+
+ if (!hs_clk.pmctrl) {
+ /* map pmctrl registers */
+ node = of_find_compatible_node(NULL, NULL, "hisilicon,pmctrl");
+ hs_clk.pmctrl = of_iomap(node, 0);
+ WARN_ON(!hs_clk.pmctrl);
+ }
+
+ if (!hs_clk.sctrl) {
+ node = of_find_compatible_node(NULL, NULL, "hisilicon,sctrl");
+ hs_clk.sctrl = of_iomap(node, 0);
+ }
+}
+
+static int hi3620_clkgate_prepare(struct clk_hw *hw)
+{
+ struct hi3620_periclk *pclk;
+ unsigned long flags = 0;
+
+ pclk = container_of(hw, struct hi3620_periclk, hw);
+
+ if (pclk->lock)
+ spin_lock_irqsave(pclk->lock, flags);
+ writel_relaxed(pclk->ebits, pclk->enable + HI3620_DISABLE_OFF);
+ writel_relaxed(pclk->rbits, pclk->reset + HI3620_DISABLE_OFF);
+ readl_relaxed(pclk->reset + HI3620_STATUS_OFF);
+ if (pclk->lock)
+ spin_unlock_irqrestore(pclk->lock, flags);
+ return 0;
+}
+
+static int hi3620_clkgate_enable(struct clk_hw *hw)
+{
+ struct hi3620_periclk *pclk;
+ unsigned long flags = 0;
+
+ pclk = container_of(hw, struct hi3620_periclk, hw);
+ if (pclk->lock)
+ spin_lock_irqsave(pclk->lock, flags);
+ writel_relaxed(pclk->ebits, pclk->enable);
+ readl_relaxed(pclk->enable + HI3620_STATUS_OFF);
+ if (pclk->lock)
+ spin_unlock_irqrestore(pclk->lock, flags);
+ return 0;
+}
+
+static void hi3620_clkgate_disable(struct clk_hw *hw)
+{
+ struct hi3620_periclk *pclk;
+ unsigned long flags = 0;
+
+ pclk = container_of(hw, struct hi3620_periclk, hw);
+ if (pclk->lock)
+ spin_lock_irqsave(pclk->lock, flags);
+ writel_relaxed(pclk->ebits, pclk->enable + HI3620_DISABLE_OFF);
+ readl_relaxed(pclk->enable + HI3620_STATUS_OFF);
+ if (pclk->lock)
+ spin_unlock_irqrestore(pclk->lock, flags);
+}
+
+static struct clk_ops hi3620_clkgate_ops = {
+ .prepare = hi3620_clkgate_prepare,
+ .enable = hi3620_clkgate_enable,
+ .disable = hi3620_clkgate_disable,
+};
+
+static void __init hi3620_clkgate_setup(struct device_node *np)
+{
+ struct hi3620_periclk *pclk;
+ struct clk_init_data *init;
+ struct clk *clk;
+ const char *clk_name, *name, **parent_names;
+ u32 rdata[2], gdata[2];
+
+ if (!hs_clk.sctrl)
+ return;
+
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ return;
+ if (of_property_read_u32_array(np, "hisilicon,hi3620-clkreset",
+ &rdata[0], 2))
+ return;
+ if (of_property_read_u32_array(np, "hisilicon,hi3620-clkgate",
+ &gdata[0], 2))
+ return;
+
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ return;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+
+ pclk = kzalloc(sizeof(*pclk), GFP_KERNEL);
+ if (!pclk)
+ goto err_pclk;
+
+ init = kzalloc(sizeof(*init), GFP_KERNEL);
+ if (!init)
+ goto err_init;
+ init->name = kstrdup(clk_name, GFP_KERNEL);
+ init->ops = &hi3620_clkgate_ops;
+ init->flags = CLK_SET_RATE_PARENT;
+ init->parent_names = parent_names;
+ init->num_parents = 1;
+
+ pclk->reset = hs_clk.sctrl + rdata[0];
+ pclk->rbits = rdata[1];
+ pclk->enable = hs_clk.sctrl + gdata[0];
+ pclk->ebits = gdata[1];
+ pclk->lock = &hs_clk.lock;
+ pclk->hw.init = init;
+
+ clk = clk_register(NULL, &pclk->hw);
+ if (IS_ERR(clk))
+ goto err_clk;
+ if (!of_property_read_string(np, "clock-names", &name))
+ clk_register_clkdev(clk, name, NULL);
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err_clk:
+ kfree(init);
+err_init:
+ kfree(pclk);
+err_pclk:
+ kfree(parent_names);
+}
+
+static u8 hi3620_clk_get_parent(struct clk_hw *hw)
+{
+ struct hi3620_muxclk *mclk;
+ u32 data;
+ unsigned long flags = 0;
+
+ mclk = container_of(hw, struct hi3620_muxclk, hw);
+
+ if (mclk->lock)
+ spin_lock_irqsave(mclk->lock, flags);
+
+ data = readl_relaxed(mclk->reg) >> mclk->shift;
+ data &= WIDTH_TO_MASK(mclk->width);
+
+ if (mclk->lock)
+ spin_unlock_irqrestore(mclk->lock, flags);
+
+ if (data >= __clk_get_num_parents(hw->clk))
+ return -EINVAL;
+
+ return (u8)data;
+}
+
+static int hi3620_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct hi3620_muxclk *mclk;
+ u32 data;
+ unsigned long flags = 0;
+
+ mclk = container_of(hw, struct hi3620_muxclk, hw);
+
+ if (mclk->lock)
+ spin_lock_irqsave(mclk->lock, flags);
+
+ data = readl_relaxed(mclk->reg);
+ data &= ~(WIDTH_TO_MASK(mclk->width) << mclk->shift);
+ data |= index << mclk->shift;
+ writel_relaxed(data, mclk->reg);
+ /* set mask enable bits */
+ data |= mclk->mbits;
+ writel_relaxed(data, mclk->reg);
+
+ if (mclk->lock)
+ spin_unlock_irqrestore(mclk->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops hi3620_clkmux_ops = {
+ .get_parent = hi3620_clk_get_parent,
+ .set_parent = hi3620_clk_set_parent,
+};
+
+static void __init hi3620_clkmux_setup(struct device_node *np)
+{
+ struct hi3620_muxclk *mclk;
+ struct clk_init_data *init;
+ struct clk *clk;
+ const char *clk_name, **parent_names;
+ u32 rdata[2];
+ u8 num_parents;
+ int i;
+
+ hs_init_clocks();
+ if (!hs_clk.sctrl)
+ return;
+
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ return;
+ if (of_property_read_u32_array(np, "hisilicon,hi3620-clkmux",
+ &rdata[0], 2))
+ return;
+ /* get the count of items in mux */
+ for (i = 0; ; i++) {
+ /* parent's #clock-cells property is always 0 */
+ if (!of_parse_phandle(np, "clocks", i))
+ break;
+ }
+ parent_names = kzalloc(sizeof(char *) * i, GFP_KERNEL);
+ if (!parent_names)
+ return;
+
+ for (num_parents = i, i = 0; i < num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(np, i);
+
+ mclk = kzalloc(sizeof(*mclk), GFP_KERNEL);
+ if (!mclk)
+ goto err_mclk;
+ init = kzalloc(sizeof(*init), GFP_KERNEL);
+ if (!init)
+ goto err_init;
+ init->name = kstrdup(clk_name, GFP_KERNEL);
+ init->ops = &hi3620_clkmux_ops;
+ init->flags = CLK_SET_RATE_PARENT;
+ init->parent_names = parent_names;
+ init->num_parents = num_parents;
+
+ mclk->reg = hs_clk.sctrl + rdata[0];
+ /* enable_mask bits are in higher 16bits */
+ mclk->mbits = rdata[1] << 16;
+ mclk->shift = ffs(rdata[1]) - 1;
+ mclk->width = fls(rdata[1]) - ffs(rdata[1]) + 1;
+ mclk->lock = &hs_clk.lock;
+ mclk->hw.init = init;
+
+ clk = clk_register(NULL, &mclk->hw);
+ if (IS_ERR(clk))
+ goto err_clk;
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+
+ return;
+err_clk:
+ kfree(init);
+err_init:
+ kfree(mclk);
+err_mclk:
+ kfree(parent_names);
+}
+
+static void __init hs_clkgate_setup(struct device_node *np)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names, *name;
+ unsigned long flags = 0;
+ u32 data[2];
+
+ hs_init_clocks();
+ if (!hs_clk.sctrl)
+ return;
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ return;
+ if (of_property_read_u32_array(np, "hisilicon,clkgate",
+ &data[0], 2))
+ return;
+ if (of_property_read_bool(np, "hisilicon,clkgate-inverted"))
+ flags = CLK_GATE_SET_TO_DISABLE;
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ return;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+
+ clk = clk_register_gate(NULL, clk_name, parent_names[0], 0,
+ hs_clk.sctrl + data[0], (u8)data[1], flags,
+ &hs_clk.lock);
+ if (IS_ERR(clk))
+ goto err;
+ if (!of_property_read_string(np, "clock-names", &name))
+ clk_register_clkdev(clk, name, NULL);
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err:
+ kfree(parent_names);
+}
+
+void __init hs_fixed_factor_setup(struct device_node *np)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names;
+ u32 data[2];
+
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ return;
+ if (of_property_read_u32_array(np, "hisilicon,fixed-factor",
+ data, 2))
+ return ;
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ return;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+
+ clk = clk_register_fixed_factor(NULL, clk_name, parent_names[0], 0,
+ data[0], data[1]);
+ if (IS_ERR(clk))
+ goto err;
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err:
+ kfree(parent_names);
+}
+
+static unsigned int hi3620_get_table_maxdiv(const struct clk_div_table *table)
+{
+ unsigned int maxdiv = 0;
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div > maxdiv)
+ maxdiv = clkt->div;
+ return maxdiv;
+}
+
+static unsigned int hi3620_get_table_div(const struct clk_div_table *table,
+ unsigned int val)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->val == val)
+ return clkt->div;
+ return 0;
+}
+
+static unsigned int hi3620_get_table_val(const struct clk_div_table *table,
+ unsigned int div)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div == div)
+ return clkt->val;
+ return 0;
+}
+
+static unsigned long hi3620_clkdiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct hi3620_divclk *dclk = container_of(hw, struct hi3620_divclk, hw);
+ unsigned int div, val;
+
+ val = readl_relaxed(dclk->reg) >> dclk->shift;
+ val &= WIDTH_TO_MASK(dclk->width);
+
+ div = hi3620_get_table_div(dclk->table, val);
+ if (!div) {
+ pr_warning("%s: Invalid divisor for clock %s\n", __func__,
+ __clk_get_name(hw->clk));
+ return parent_rate;
+ }
+
+ return parent_rate / div;
+}
+
+static bool hi3620_is_valid_table_div(const struct clk_div_table *table,
+ unsigned int div)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div == div)
+ return true;
+ return false;
+}
+
+static int hi3620_clkdiv_bestdiv(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate)
+{
+ struct hi3620_divclk *dclk = container_of(hw, struct hi3620_divclk, hw);
+ struct clk *clk_parent = __clk_get_parent(hw->clk);
+ int i, bestdiv = 0;
+ unsigned long parent_rate, best = 0, now, maxdiv;
+
+ maxdiv = hi3620_get_table_maxdiv(dclk->table);
+
+ if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+ parent_rate = *best_parent_rate;
+ bestdiv = DIV_ROUND_UP(parent_rate, rate);
+ bestdiv = bestdiv == 0 ? 1 : bestdiv;
+ bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
+ return bestdiv;
+ }
+
+ /*
+ * The maximum divider we can use without overflowing
+ * unsigned long in rate * i below
+ */
+ maxdiv = min(ULONG_MAX / rate, maxdiv);
+
+ for (i = 1; i <= maxdiv; i++) {
+ if (!hi3620_is_valid_table_div(dclk->table, i))
+ continue;
+ parent_rate = __clk_round_rate(clk_parent,
+ MULT_ROUND_UP(rate, i));
+ now = parent_rate / i;
+ if (now <= rate && now > best) {
+ bestdiv = i;
+ best = now;
+ *best_parent_rate = parent_rate;
+ }
+ }
+
+ if (!bestdiv) {
+ bestdiv = hi3620_get_table_maxdiv(dclk->table);
+ *best_parent_rate = __clk_round_rate(clk_parent, 1);
+ }
+
+ return bestdiv;
+}
+
+static long hi3620_clkdiv_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ int div;
+
+ if (!rate)
+ rate = 1;
+ div = hi3620_clkdiv_bestdiv(hw, rate, prate);
+
+ return *prate / div;
+}
+
+static int hi3620_clkdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct hi3620_divclk *dclk = container_of(hw, struct hi3620_divclk, hw);
+ unsigned int div, value;
+ unsigned long flags = 0;
+ u32 data;
+
+ div = parent_rate / rate;
+ value = hi3620_get_table_val(dclk->table, div);
+
+ if (value > WIDTH_TO_MASK(dclk->width))
+ value = WIDTH_TO_MASK(dclk->width);
+
+ if (dclk->lock)
+ spin_lock_irqsave(dclk->lock, flags);
+
+ data = readl_relaxed(dclk->reg);
+ data &= ~(WIDTH_TO_MASK(dclk->width) << dclk->shift);
+ data |= value << dclk->shift;
+ data |= dclk->mbits;
+ writel_relaxed(data, dclk->reg);
+
+ if (dclk->lock)
+ spin_unlock_irqrestore(dclk->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops hi3620_clkdiv_ops = {
+ .recalc_rate = hi3620_clkdiv_recalc_rate,
+ .round_rate = hi3620_clkdiv_round_rate,
+ .set_rate = hi3620_clkdiv_set_rate,
+};
+
+void __init hi3620_clkdiv_setup(struct device_node *np)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names;
+ struct clk_init_data *init;
+ struct clk_div_table *table;
+ struct hi3620_divclk *dclk;
+ unsigned int table_num;
+ int i;
+ u32 data[2];
+ const char *propname = "hisilicon,clkdiv-table";
+ const char *cellname = "#hisilicon,clkdiv-table-cells";
+ struct of_phandle_args div_table;
+
+ hs_init_clocks();
+ if (!hs_clk.sctrl)
+ return;
+
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ return;
+ if (of_property_read_u32_array(np, "hisilicon,clkdiv",
+ &data[0], 2))
+ return;
+
+ /*process the div_table*/
+ for (i = 0; ; i++) {
+ if (of_parse_phandle_with_args(np, propname, cellname,
+ i, &div_table))
+ break;
+ }
+
+ /*table ends with <0, 0>, so plus one to table_num*/
+ table_num = i + 1;
+
+ table = kzalloc(sizeof(struct clk_div_table) * table_num, GFP_KERNEL);
+ if (!table)
+ return ;
+
+ for (i = 0; ; i++) {
+ if (of_parse_phandle_with_args(np, propname, cellname,
+ i, &div_table))
+ break;
+
+ table[i].val = div_table.args[0];
+ table[i].div = div_table.args[1];
+ }
+
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ goto err_par;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+
+ dclk = kzalloc(sizeof(*dclk), GFP_KERNEL);
+ if (!dclk)
+ goto err_dclk;
+ init = kzalloc(sizeof(*init), GFP_KERNEL);
+ if (!init)
+ goto err_init;
+ init->name = kstrdup(clk_name, GFP_KERNEL);
+ init->ops = &hi3620_clkdiv_ops;
+ init->parent_names = parent_names;
+ init->num_parents = 1;
+
+ dclk->reg = hs_clk.sctrl + data[0];
+ dclk->shift = ffs(data[1]) - 1;
+ dclk->width = fls(data[1]) - ffs(data[1]) + 1;
+ dclk->mbits = data[1] << 16;
+ dclk->lock = &hs_clk.lock;
+ dclk->hw.init = init;
+ dclk->table = table;
+ clk = clk_register(NULL, &dclk->hw);
+ if (IS_ERR(clk))
+ goto err_clk;
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err_clk:
+ kfree(init);
+err_init:
+ kfree(dclk);
+err_dclk:
+ kfree(parent_names);
+err_par:
+ kfree(table);
+}
+CLK_OF_DECLARE(hi3620_mux, "hisilicon,hi3620-clk-mux", hi3620_clkmux_setup)
+CLK_OF_DECLARE(hi3620_gate, "hisilicon,hi3620-clk-gate", hi3620_clkgate_setup)
+CLK_OF_DECLARE(hi3620_div, "hisilicon,hi3620-clk-div", hi3620_clkdiv_setup)
+CLK_OF_DECLARE(hs_gate, "hisilicon,clk-gate", hs_clkgate_setup)
+CLK_OF_DECLARE(hs_fixed, "hisilicon,clk-fixed-factor", hs_fixed_factor_setup)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 4/5] ARM: hi3xxx: enable hi4511 with device tree
2013-04-19 10:49 [PATCH 1/5] ARM: debug: support debug ll on hisilicon soc Haojian Zhuang
2013-04-19 10:49 ` [PATCH 2/5] clk: hi3xxx: add clock support Haojian Zhuang
2013-04-19 10:49 ` [PATCH 3/5] ARM: hi3xxx: add board support with device tree Haojian Zhuang
@ 2013-04-19 10:49 ` Haojian Zhuang
2013-04-19 10:49 ` [PATCH 5/5] ARM: config: append arch hi3xxx into multi defconfig Haojian Zhuang
3 siblings, 0 replies; 8+ messages in thread
From: Haojian Zhuang @ 2013-04-19 10:49 UTC (permalink / raw)
To: linux-arm-kernel
Enable Hisilicon Hi4511 development platform with device tree support.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/hi3620.dtsi | 1155 +++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/hi4511.dts | 738 ++++++++++++++++++++++++++
3 files changed, 1894 insertions(+)
create mode 100644 arch/arm/boot/dts/hi3620.dtsi
create mode 100644 arch/arm/boot/dts/hi4511.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08d298d..742920d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -46,6 +46,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5440-ssdk5440.dtb
+dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
new file mode 100644
index 0000000..e33fe7f
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -0,0 +1,1155 @@
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ osc32k: osc at 0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc32khz";
+ };
+ osc26m: osc at 1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "osc26mhz";
+ };
+ pclk: clk at 0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "apb_pclk";
+ };
+ pll_arm0: clk at 1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll0";
+ };
+ pll_arm1: clk at 2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll1";
+ };
+ pll_peri: clk at 3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll2";
+ };
+ pll_usb: clk at 4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll3";
+ };
+ pll_hdmi: clk at 5 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1188000000>;
+ clock-output-names = "armpll4";
+ };
+ pll_gpu: clk at 6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1300000000>;
+ clock-output-names = "armpll5";
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ pmctrl: pmctrl at fca08000 {
+ compatible = "hisilicon,pmctrl";
+ reg = <0xfca08000 0x1000>;
+ };
+
+ sctrl: sctrl at fc802000 {
+ compatible = "hisilicon,sctrl";
+ reg = <0xfc802000 0x1000>;
+
+ refclk_uart0: refclk at 0 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart0";
+ /* each item value */
+ /* reg_offset, enable_bits */
+ hisilicon,hi3620-clkmux = <0x100 0x80>;
+ };
+ refclk_uart1: refclk at 1 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart1";
+ hisilicon,hi3620-clkmux = <0x100 0x100>;
+ };
+ refclk_uart2: refclk at 2 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart2";
+ hisilicon,hi3620-clkmux = <0x100 0x200>;
+ };
+ refclk_uart3: refclk at 3 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart3";
+ hisilicon,hi3620-clkmux = <0x100 0x400>;
+ };
+ refclk_uart4: refclk at 4 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart4";
+ hisilicon,hi3620-clkmux = <0x100 0x800>;
+ };
+ refclk_cfgaxi: refclk at 5 {
+ compatible = "hisilicon,clk-fixed-factor";
+ #clock-cells = <0>;
+ clocks = <&pll_peri>;
+ clock-output-names = "rclk_cfgaxi";
+ /*mult, div*/
+ hisilicon,fixed-factor = <1 30>;
+ };
+ refclk_spi0: refclk at 6 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &refclk_cfgaxi>;
+ clock-output-names = "rclk_spi0";
+ hisilicon,hi3620-clkmux = <0x100 0x1000>;
+ };
+ refclk_spi1: refclk at 7 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &refclk_cfgaxi>;
+ clock-output-names = "rclk_spi1";
+ hisilicon,hi3620-clkmux = <0x100 0x2000>;
+ };
+ refclk_spi2: refclk at 8 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &refclk_cfgaxi>;
+ clock-output-names = "rclk_spi2";
+ hisilicon,hi3620-clkmux = <0x100 0x4000>;
+ };
+ refclk_pwm0: refclk at 9 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "rclk_pwm0";
+ hisilicon,hi3620-clkmux = <0x104 0x400>;
+ };
+ refclk_pwm1: refclk at 10 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "rclk_pwm1";
+ hisilicon,hi3620-clkmux = <0x104 0x800>;
+ };
+ refclk_tcxo: refclk at 11 {
+ compatible = "hisilicon,clk-fixed-factor";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "rclk_tcxo";
+ hisilicon,fixed-factor = <1 4>;
+ };
+ refclk_timer0: refclk at 12 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "rclk_tim0";
+ hisilicon,hi3620-clkmux = <0 0x8000>;
+ };
+ refclk_timer1: refclk at 13 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "rclk_tim1";
+ hisilicon,hi3620-clkmux = <0 0x20000>;
+ };
+ refclk_timer2: refclk at 14 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "rclk_tim2";
+ hisilicon,hi3620-clkmux = <0 0x80000>;
+ };
+ refclk_timer3: refclk at 15 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "rclk_tim3";
+ hisilicon,hi3620-clkmux = <0 0x200000>;
+ };
+ refclk_timer4: refclk at 16 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "rclk_tim4";
+ hisilicon,hi3620-clkmux = <0x18 0x1>;
+ };
+ refclk_timer5: refclk at 17 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "rclk_tim5";
+ hisilicon,hi3620-clkmux = <0x18 0x4>;
+ };
+ refclk_timer6: refclk at 18 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "rclk_tim6";
+ hisilicon,hi3620-clkmux = <0x18 0x10>;
+ };
+ refclk_timer7: refclk at 19 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "rclk_tim7";
+ hisilicon,hi3620-clkmux = <0x18 0x40>;
+ };
+ refclk_timer8: refclk at 20 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "rclk_tim8";
+ hisilicon,hi3620-clkmux = <0x18 0x100>;
+ };
+ refclk_timer9: refclk at 21 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "rclk_tim9";
+ hisilicon,hi3620-clkmux = <0x18 0x400>;
+ };
+ refclk_shareAXI: refclk at 22 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "rclk_shareAXI";
+ hisilicon,hi3620-clkmux = <0x24 0x8000>;
+ };
+ uartclk0: clkgate at 0 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart0>;
+ clock-output-names = "uartclk0";
+ hisilicon,hi3620-clkreset = <0x98 0x10000>;
+ hisilicon,hi3620-clkgate = <0x40 0x10000>;
+ };
+ uartclk1: clkgate at 1 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart1>;
+ clock-output-names = "uartclk1";
+ hisilicon,hi3620-clkreset = <0x98 0x20000>;
+ hisilicon,hi3620-clkgate = <0x40 0x20000>;
+ };
+ uartclk2: clkgate at 2 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart2>;
+ clock-output-names = "uartclk2";
+ hisilicon,hi3620-clkreset = <0x98 0x40000>;
+ hisilicon,hi3620-clkgate = <0x40 0x40000>;
+ };
+ uartclk3: clkgate at 3 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart3>;
+ clock-output-names = "uartclk3";
+ hisilicon,hi3620-clkreset = <0x98 0x80000>;
+ hisilicon,hi3620-clkgate = <0x40 0x80000>;
+ };
+ uartclk4: clkgate at 4 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart4>;
+ clock-output-names = "uartclk4";
+ hisilicon,hi3620-clkreset = <0x98 0x100000>;
+ hisilicon,hi3620-clkgate = <0x40 0x100000>;
+ };
+ gpioclk0: clkgate at 5 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk0";
+ hisilicon,hi3620-clkreset = <0x80 0x100>;
+ hisilicon,hi3620-clkgate = <0x20 0x100>;
+ };
+ gpioclk1: clkgate at 6 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk1";
+ hisilicon,hi3620-clkreset = <0x80 0x200>;
+ hisilicon,hi3620-clkgate = <0x20 0x200>;
+ };
+ gpioclk2: clkgate at 7 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk2";
+ hisilicon,hi3620-clkreset = <0x80 0x400>;
+ hisilicon,hi3620-clkgate = <0x20 0x400>;
+ };
+ gpioclk3: clkgate at 8 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk3";
+ hisilicon,hi3620-clkreset = <0x80 0x800>;
+ hisilicon,hi3620-clkgate = <0x20 0x800>;
+ };
+ gpioclk4: clkgate at 9 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk4";
+ hisilicon,hi3620-clkreset = <0x80 0x1000>;
+ hisilicon,hi3620-clkgate = <0x20 0x1000>;
+ };
+ gpioclk5: clkgate at 10 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk5";
+ hisilicon,hi3620-clkreset = <0x80 0x2000>;
+ hisilicon,hi3620-clkgate = <0x20 0x2000>;
+ };
+ gpioclk6: clkgate at 11 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk6";
+ hisilicon,hi3620-clkreset = <0x80 0x4000>;
+ hisilicon,hi3620-clkgate = <0x20 0x4000>;
+ };
+ gpioclk7: clkgate at 12 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk7";
+ hisilicon,hi3620-clkreset = <0x80 0x8000>;
+ hisilicon,hi3620-clkgate = <0x20 0x8000>;
+ };
+ gpioclk8: clkgate at 13 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk8";
+ hisilicon,hi3620-clkreset = <0x80 0x10000>;
+ hisilicon,hi3620-clkgate = <0x20 0x10000>;
+ };
+ gpioclk9: clkgate at 14 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk9";
+ hisilicon,hi3620-clkreset = <0x80 0x20000>;
+ hisilicon,hi3620-clkgate = <0x20 0x20000>;
+ };
+ gpioclk10: clkgate at 15 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk10";
+ hisilicon,hi3620-clkreset = <0x80 0x40000>;
+ hisilicon,hi3620-clkgate = <0x20 0x40000>;
+ };
+ gpioclk11: clkgate at 16 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk11";
+ hisilicon,hi3620-clkreset = <0x80 0x80000>;
+ hisilicon,hi3620-clkgate = <0x20 0x80000>;
+ };
+ gpioclk12: clkgate at 17 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk12";
+ hisilicon,hi3620-clkreset = <0x80 0x100000>;
+ hisilicon,hi3620-clkgate = <0x20 0x100000>;
+ };
+ gpioclk13: clkgate at 18 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk13";
+ hisilicon,hi3620-clkreset = <0x80 0x200000>;
+ hisilicon,hi3620-clkgate = <0x20 0x200000>;
+ };
+ gpioclk14: clkgate at 19 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk14";
+ hisilicon,hi3620-clkreset = <0x80 0x400000>;
+ hisilicon,hi3620-clkgate = <0x20 0x400000>;
+ };
+ gpioclk15: clkgate at 20 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk15";
+ hisilicon,hi3620-clkreset = <0x80 0x800000>;
+ hisilicon,hi3620-clkgate = <0x20 0x800000>;
+ };
+ gpioclk16: clkgate at 21 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk16";
+ hisilicon,hi3620-clkreset = <0x80 0x1000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x1000000>;
+ };
+ gpioclk17: clkgate at 22 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk17";
+ hisilicon,hi3620-clkreset = <0x80 0x2000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x2000000>;
+ };
+ gpioclk18: clkgate at 23 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk18";
+ hisilicon,hi3620-clkreset = <0x80 0x4000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x4000000>;
+ };
+ gpioclk19: clkgate at 24 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk19";
+ hisilicon,hi3620-clkreset = <0x80 0x8000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x8000000>;
+ };
+ gpioclk20: clkgate at 25 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk20";
+ hisilicon,hi3620-clkreset = <0x80 0x10000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x10000000>;
+ };
+ gpioclk21: clkgate at 26 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk21";
+ hisilicon,hi3620-clkreset = <0x80 0x20000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x20000000>;
+ };
+ spiclk0: clkgate at 27 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_spi0>;
+ clock-output-names = "spiclk0";
+ hisilicon,hi3620-clkreset = <0x98 0x200000>;
+ hisilicon,hi3620-clkgate = <0x40 0x200000>;
+ };
+ spiclk1: clkgate at 28 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_spi1>;
+ clock-output-names = "spiclk1";
+ hisilicon,hi3620-clkreset = <0x98 0x400000>;
+ hisilicon,hi3620-clkgate = <0x40 0x400000>;
+ };
+ spiclk2: clkgate at 29 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_spi2>;
+ clock-output-names = "spiclk2";
+ hisilicon,hi3620-clkreset = <0x98 0x800000>;
+ hisilicon,hi3620-clkgate = <0x40 0x800000>;
+ };
+ pwmclk0: clkgate at 30 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_pwm0>;
+ clock-output-names = "pwmclk0";
+ hisilicon,hi3620-clkreset = <0x98 0x80>;
+ hisilicon,hi3620-clkgate = <0x40 0x80>;
+ };
+ pwmclk1: clkgate at 31 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_pwm1>;
+ clock-output-names = "pwmclk1";
+ hisilicon,hi3620-clkreset = <0x98 0x100>;
+ hisilicon,hi3620-clkgate = <0x40 0x100>;
+ };
+ timerclk01: clkgate at 32 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk01";
+ hisilicon,hi3620-clkreset = <0x80 0x1>;
+ hisilicon,hi3620-clkgate = <0x20 0x3>;
+ };
+ timerclk23: clkgate at 33 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk23";
+ hisilicon,hi3620-clkreset = <0x80 0x2>;
+ hisilicon,hi3620-clkgate = <0x20 0xc>;
+ };
+ timerclk45: clkgate at 34 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk45";
+ hisilicon,hi3620-clkreset = <0x98 0x8>;
+ hisilicon,hi3620-clkgate = <0x40 0x8>;
+ };
+ timerclk67: clkgate at 35 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk67";
+ hisilicon,hi3620-clkreset = <0x98 0x10>;
+ hisilicon,hi3620-clkgate = <0x40 0x10>;
+ };
+ timerclk89: clkgate at 36 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk89";
+ hisilicon,hi3620-clkreset = <0x98 0x20>;
+ hisilicon,hi3620-clkgate = <0x40 0x20>;
+ };
+ timclk0: clkgate at 37 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer0>;
+ clock-output-names = "timclk0";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 16>;
+ };
+ timclk1: clkgate at 38 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer1>;
+ clock-output-names = "timclk1";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 18>;
+ };
+ timclk2: clkgate at 39 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer2>;
+ clock-output-names = "timclk2";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 20>;
+ };
+ timclk3: clkgate at 40 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer3>;
+ clock-output-names = "timclk3";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 22>;
+ };
+ timclk4: clkgate at 41 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer4>;
+ clock-output-names = "timclk4";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 0>;
+ };
+ timclk5: clkgate at 42 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer5>;
+ clock-output-names = "timclk5";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 2>;
+ };
+ timclk6: clkgate at 43 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer6>;
+ clock-output-names = "timclk6";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 4>;
+ };
+ timclk7: clkgate at 44 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer7>;
+ clock-output-names = "timclk7";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 6>;
+ };
+ timclk8: clkgate at 45 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer8>;
+ clock-output-names = "timclk8";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 8>;
+ };
+ timclk9: clkgate at 46 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer9>;
+ clock-output-names = "timclk9";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 10>;
+ };
+ dtable: clkdiv at 0 {
+ #hisilicon,clkdiv-table-cells = <2>;
+ };
+ div_shareaxi: clkdiv at 1 {
+ compatible = "hisilicon,hi3620-clk-div";
+ #clock-cells = <0>;
+ clocks = <&refclk_shareAXI>;
+ clock-output-names = "shareAXI_div";
+ hisilicon,clkdiv-table = <
+ &dtable 0 1 &dtable 1 2 &dtable 2 3 &dtable 3 4
+ &dtable 4 5 &dtable 5 6 &dtable 6 7 &dtable 7 8
+ &dtable 8 9 &dtable 9 10 &dtable 10 11 &dtable 11 12
+ &dtable 12 13 &dtable 13 14 &dtable 14 15 &dtable 15 16
+ &dtable 16 17 &dtable 17 18 &dtable 18 19 &dtable 19 20
+ &dtable 20 21 &dtable 21 22 &dtable 22 23 &dtable 23 24
+ &dtable 24 25 &dtable 25 26 &dtable 26 27 &dtable 27 28
+ &dtable 28 29 &dtable 29 30 &dtable 30 31 &dtable 31 32>;
+ /* divider register offset, mask */
+ hisilicon,clkdiv = <0x100 0x1f>;
+ };
+ div_cfgaxi: clkdiv at 2 {
+ compatible = "hisilicon,hi3620-clk-div";
+ #clock-cells = <0>;
+ clocks = <&div_shareaxi>;
+ clock-output-names = "cfgAXI_div";
+ hisilicon,clkdiv-table = <&dtable 0x01 2>;
+ hisilicon,clkdiv = <0x100 0x60>;
+ };
+ };
+
+ l2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xfc10000 0x100000>;
+ interrupts = <0 15 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ intc: interrupt-controller at fc001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ /* gic dist base, gic cpu base */
+ reg = <0xfc001000 0x1000>, <0xfc000100 0x100>;
+ };
+
+ timer0: timer at fc800000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc800000 0x1000>;
+ /* timer00 & timer01 */
+ interrupts = <0 0 4>, <0 1 4>;
+ clocks = <&timclk0 &timclk1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer1: timer at fc801000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc801000 0x1000>;
+ /* timer10 & timer11 */
+ interrupts = <0 2 4>, <0 3 4>;
+ clocks = <&timclk2 &timclk3>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer2: timer at fca01000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca01000 0x1000>;
+ /* timer20 & timer21 */
+ interrupts = <0 4 4>, <0 5 4>;
+ clocks = <&timclk4 &timclk5>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer3: timer at fca02000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca02000 0x1000>;
+ /* timer30 & timer31 */
+ interrupts = <0 6 4>, <0 7 4>;
+ clocks = <&timclk6 &timclk7>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer4: timer at fca03000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca03000 0x1000>;
+ /* timer40 & timer41 */
+ interrupts = <0 96 4>, <0 97 4>;
+ clocks = <&timclk8 &timclk9>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart0: uart at fcb00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb00000 0x1000>;
+ interrupts = <0 20 4>;
+ clocks = <&uartclk0>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: uart at fcb01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb01000 0x1000>;
+ interrupts = <0 21 4>;
+ clocks = <&uartclk1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart at fcb02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb02000 0x1000>;
+ interrupts = <0 22 4>;
+ clocks = <&uartclk2>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart at fcb03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb03000 0x1000>;
+ interrupts = <0 23 4>;
+ clocks = <&uartclk3>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart4: uart at fcb04000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb04000 0x1000>;
+ interrupts = <0 24 4>;
+ clocks = <&uartclk4>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio0: gpio at fc806000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc806000 0x1000>;
+ interrupts = <0 64 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+ &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk0>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio1: gpio at fc807000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc807000 0x1000>;
+ interrupts = <0 65 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+ &pmx0 6 5 1 &pmx0 7 6 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk1>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio2: gpio at fc808000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc808000 0x1000>;
+ interrupts = <0 66 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+ &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+ &pmx0 6 3 1 &pmx0 7 3 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk2>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio3: gpio at fc809000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc809000 0x1000>;
+ interrupts = <0 67 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+ &pmx0 6 11 1 &pmx0 7 11 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk3>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio4: gpio at fc80a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80a000 0x1000>;
+ interrupts = <0 68 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+ &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+ &pmx0 6 13 1 &pmx0 7 13 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk4>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio5: gpio at fc80b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80b000 0x1000>;
+ interrupts = <0 69 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+ &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+ &pmx0 6 16 1 &pmx0 7 16 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk5>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio6: gpio at fc80c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80c000 0x1000>;
+ interrupts = <0 70 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+ &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+ &pmx0 6 18 1 &pmx0 7 19 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk6>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio7: gpio at fc80d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80d000 0x1000>;
+ interrupts = <0 71 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+ &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+ &pmx0 6 25 1 &pmx0 7 26 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk7>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio8: gpio at fc80e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80e000 0x1000>;
+ interrupts = <0 72 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+ &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+ &pmx0 6 33 1 &pmx0 7 34 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk8>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio9: gpio at fc80f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80f000 0x1000>;
+ interrupts = <0 73 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+ &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+ &pmx0 6 41 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk9>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio10: gpio at fc810000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc810000 0x1000>;
+ interrupts = <0 74 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+ &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk10>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio11: gpio at fc811000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc811000 0x1000>;
+ interrupts = <0 75 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+ &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+ &pmx0 6 49 1 &pmx0 7 49 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk11>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio12: gpio at fc812000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc812000 0x1000>;
+ interrupts = <0 76 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+ &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+ &pmx0 6 51 1 &pmx0 7 52 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk12>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio13: gpio at fc813000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc813000 0x1000>;
+ interrupts = <0 77 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+ &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+ &pmx0 6 55 1 &pmx0 7 56 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk13>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio14: gpio at fc814000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc814000 0x1000>;
+ interrupts = <0 78 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+ &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+ &pmx0 6 60 1 &pmx0 7 61 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk14>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio15: gpio at fc815000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc815000 0x1000>;
+ interrupts = <0 79 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+ &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+ &pmx0 6 64 1 &pmx0 7 65 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk15>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio16: gpio at fc816000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc816000 0x1000>;
+ interrupts = <0 80 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+ &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+ &pmx0 6 72 1 &pmx0 7 73 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk16>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio17: gpio at fc817000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc817000 0x1000>;
+ interrupts = <0 81 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+ &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+ &pmx0 6 80 1 &pmx0 7 81 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk17>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio18: gpio at fc818000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc818000 0x1000>;
+ interrupts = <0 82 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+ &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+ &pmx0 6 86 1 &pmx0 7 87 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk18>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio19: gpio at fc819000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc819000 0x1000>;
+ interrupts = <0 83 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+ &pmx0 3 88 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk19>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio20: gpio at fc81a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81a000 0x1000>;
+ interrupts = <0 84 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+ &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk20>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio21: gpio at fc81b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81b000 0x1000>;
+ interrupts = <0 85 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk21>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ pmx0: pinmux at fc803000 {
+ compatible = "pinctrl-single";
+ reg = <0xfc803000 0x188>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-range-cells = <3>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+ &range 12 1 0 &range 13 29 1
+ &range 43 1 0 &range 44 49 1
+ &range 94 1 1 &range 96 2 1>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ pmx1: pinmux at fc803800 {
+ compatible = "pinconf-single";
+ reg = <0xfc803800 0x2dc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts
new file mode 100644
index 0000000..861a98a
--- /dev/null
+++ b/arch/arm/boot/dts/hi4511.dts
@@ -0,0 +1,738 @@
+/*
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "hi3620.dtsi"
+
+/ {
+ model = "Hisilicon Hi4511 Development Board";
+ compatible = "hisilicon,hi3620-hi4511";
+
+ chosen {
+ bootargs = "console=ttyAMA0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on mem=512m earlyprintk";
+ };
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ amba {
+ timer0: timer at fc800000 {
+ status = "ok";
+ };
+
+ uart0: uart at fcb00000 { /* console */
+/*
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+*/
+ status = "ok";
+ };
+
+ uart1: uart at fcb01000 { /* modem */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+ pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+ status = "ok";
+ };
+
+ uart2: uart at fcb02000 { /* audience */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+ status = "ok";
+ };
+
+ uart3: uart at fcb03000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+ status = "ok";
+ };
+
+ uart4: uart at fcb04000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+ status = "ok";
+ };
+
+ gpio0: gpio at fc806000 {
+ status = "ok";
+ };
+
+ gpio1: gpio at fc807000 {
+ status = "ok";
+ };
+
+ gpio2: gpio at fc808000 {
+ status = "ok";
+ };
+
+ gpio3: gpio at fc809000 {
+ status = "ok";
+ };
+
+ gpio4: gpio at fc80a000 {
+ status = "ok";
+ };
+
+ gpio5: gpio at fc80b000 {
+ status = "ok";
+ };
+
+ gpio6: gpio at fc80c000 {
+ status = "ok";
+ };
+
+ gpio7: gpio at fc80d000 {
+ status = "ok";
+ };
+
+ gpio8: gpio at fc80e000 {
+ status = "ok";
+ };
+
+ gpio9: gpio at fc80f000 {
+ status = "ok";
+ };
+
+ gpio10: gpio at fc810000 {
+ status = "ok";
+ };
+
+ gpio11: gpio at fc811000 {
+ status = "ok";
+ };
+
+ gpio12: gpio at fc812000 {
+ status = "ok";
+ };
+
+ gpio13: gpio at fc813000 {
+ status = "ok";
+ };
+
+ gpio14: gpio at fc814000 {
+ status = "ok";
+ };
+
+ gpio15: gpio at fc815000 {
+ status = "ok";
+ };
+
+ gpio16: gpio at fc816000 {
+ status = "ok";
+ };
+
+ gpio17: gpio at fc817000 {
+ status = "ok";
+ };
+
+ gpio18: gpio at fc818000 {
+ status = "ok";
+ };
+
+ gpio19: gpio at fc819000 {
+ status = "ok";
+ };
+
+ gpio20: gpio at fc81a000 {
+ status = "ok";
+ };
+
+ gpio21: gpio at fc81b000 {
+ status = "ok";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ call {
+ label = "call";
+ gpios = <&gpio17 2 0>;
+ linux,code = <169>; /* KEY_PHONE */
+ };
+ };
+
+ pmx0: pinmux at fc803000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func>;
+
+ board_pmx_pins: board_pmx_pins {
+ pinctrl-single,pins = <
+ 0x008 0x0 /* GPIO -- eFUSE_DOUT */
+ 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */
+ 0x104 0x0 /* USIM_RST (IOMG96) */
+ >;
+ };
+ uart0_pmx_func: uart0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f0 0x0
+ 0x0f4 0x0 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart0_pmx_idle: uart0_pmx_idle {
+ pinctrl-single,pins = <
+ /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */
+ 0x0f4 0x1 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart1_pmx_func: uart1_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */
+ 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */
+ >;
+ };
+ uart1_pmx_idle: uart1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0f8 0x1 /* GPIO (IOMG61) */
+ 0x0fc 0x1 /* GPIO (IOMG62) */
+ >;
+ };
+ uart2_pmx_func: uart2_pmx_func {
+ pinctrl-single,pins = <
+ 0x104 0x2 /* UART2_RXD (IOMG96) */
+ 0x108 0x2 /* UART2_TXD (IOMG64) */
+ >;
+ };
+ uart2_pmx_idle: uart2_pmx_idle {
+ pinctrl-single,pins = <
+ 0x104 0x1 /* GPIO (IOMG96) */
+ 0x108 0x1 /* GPIO (IOMG64) */
+ >;
+ };
+ uart3_pmx_func: uart3_pmx_func {
+ pinctrl-single,pins = <
+ 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */
+ 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */
+ >;
+ };
+ uart3_pmx_idle: uart3_pmx_idle {
+ pinctrl-single,pins = <
+ 0x160 0x1 /* GPIO (IOMG85) */
+ 0x164 0x1 /* GPIO (IOMG86) */
+ >;
+ };
+ uart4_pmx_func: uart4_pmx_func {
+ pinctrl-single,pins = <
+ 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */
+ 0x16c 0x0 /* UART4_RXD (IOMG88) */
+ 0x170 0x0 /* UART4_TXD (IOMG93) */
+ >;
+ };
+ uart4_pmx_idle: uart4_pmx_idle {
+ pinctrl-single,pins = <
+ 0x168 0x1 /* GPIO (IOMG87) */
+ 0x16c 0x1 /* GPIO (IOMG88) */
+ 0x170 0x1 /* GPIO (IOMG93) */
+ >;
+ };
+ i2c0_pmx_func: i2c0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */
+ >;
+ };
+ i2c0_pmx_idle: i2c0_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0b4 0x1 /* GPIO (IOMG45) */
+ >;
+ };
+ i2c1_pmx_func: i2c1_pmx_func {
+ pinctrl-single,pins = <
+ 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */
+ >;
+ };
+ i2c1_pmx_idle: i2c1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0b8 0x1 /* GPIO (IOMG46) */
+ >;
+ };
+ i2c2_pmx_func: i2c2_pmx_func {
+ pinctrl-single,pins = <
+ 0x068 0x0 /* I2C2_SCL (IOMG26) */
+ 0x06c 0x0 /* I2C2_SDA (IOMG27) */
+ >;
+ };
+ i2c2_pmx_idle: i2c2_pmx_idle {
+ pinctrl-single,pins = <
+ 0x068 0x1 /* GPIO (IOMG26) */
+ 0x06c 0x1 /* GPIO (IOMG27) */
+ >;
+ };
+ i2c3_pmx_func: i2c3_pmx_func {
+ pinctrl-single,pins = <
+ 0x050 0x2 /* I2C3_SCL (IOMG20) */
+ 0x054 0x2 /* I2C3_SDA (IOMG21) */
+ >;
+ };
+ i2c3_pmx_idle: i2c3_pmx_idle {
+ pinctrl-single,pins = <
+ 0x050 0x1 /* GPIO (IOMG20) */
+ 0x054 0x1 /* GPIO (IOMG21) */
+ >;
+ };
+ spi0_pmx_func: spi0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+ 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */
+ 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */
+ 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */
+ 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */
+ >;
+ };
+ spi0_pmx_idle: spi0_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0d4 0x1 /* GPIO (IOMG53) */
+ 0x0d8 0x1 /* GPIO (IOMG54) */
+ 0x0dc 0x1 /* GPIO (IOMG55) */
+ 0x0e0 0x1 /* GPIO (IOMG56) */
+ 0x0e4 0x1 /* GPIO (IOMG57) */
+ >;
+ };
+ spi1_pmx_func: spi1_pmx_func {
+ pinctrl-single,pins = <
+ 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */
+ 0x0e8 0x0 /* SPI1_DO (IOMG58) */
+ 0x0ec 0x0 /* SPI1_CS (IOMG95) */
+ >;
+ };
+ spi1_pmx_idle: spi1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x184 0x1 /* GPIO (IOMG98) */
+ 0x0e8 0x1 /* GPIO (IOMG58) */
+ 0x0ec 0x1 /* GPIO (IOMG95) */
+ >;
+ };
+ kpc_pmx_func: kpc_pmx_func {
+ pinctrl-single,pins = <
+ 0x12c 0x0 /* KEY_IN0 (IOMG73) */
+ 0x130 0x0 /* KEY_IN1 (IOMG74) */
+ 0x134 0x0 /* KEY_IN2 (IOMG75) */
+ 0x10c 0x0 /* KEY_OUT0 (IOMG65) */
+ 0x110 0x0 /* KEY_OUT1 (IOMG66) */
+ 0x114 0x0 /* KEY_OUT2 (IOMG67) */
+ >;
+ };
+ kpc_pmx_idle: kpc_pmx_idle {
+ pinctrl-single,pins = <
+ 0x12c 0x1 /* GPIO (IOMG73) */
+ 0x130 0x1 /* GPIO (IOMG74) */
+ 0x134 0x1 /* GPIO (IOMG75) */
+ 0x10c 0x1 /* GPIO (IOMG65) */
+ 0x110 0x1 /* GPIO (IOMG66) */
+ 0x114 0x1 /* GPIO (IOMG67) */
+ >;
+ };
+ gpio_key_func: gpio_key_func {
+ pinctrl-single,pins = <
+ 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */
+ 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */
+ >;
+ };
+ emmc_pmx_func: emmc_pmx_func {
+ pinctrl-single,pins = <
+ 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */
+ >;
+ };
+ emmc_pmx_idle: emmc_pmx_idle {
+ pinctrl-single,pins = <
+ 0x030 0x0 /* GPIO (IOMG12) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sd_pmx_func: sd_pmx_func {
+ pinctrl-single,pins = <
+ 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+ 0x0c0 0x0 /* SD_DATA3 (IOMG48) */
+ >;
+ };
+ sd_pmx_idle: sd_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0bc 0x1 /* GPIO (IOMG47) */
+ 0x0c0 0x1 /* GPIO (IOMG48) */
+ >;
+ };
+ nand_pmx_func: nand_pmx_func {
+ pinctrl-single,pins = <
+ 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+ 0x010 0x0 /* NAND_CS1_N (IOMG4) */
+ 0x014 0x0 /* NAND_CS2_N (IOMG5) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */
+ 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */
+ >;
+ };
+ nand_pmx_idle: nand_pmx_idle {
+ pinctrl-single,pins = <
+ 0x00c 0x1 /* GPIO (IOMG3) */
+ 0x010 0x1 /* GPIO (IOMG4) */
+ 0x014 0x1 /* GPIO (IOMG5) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x01c 0x1 /* GPIO (IOMG94) */
+ 0x020 0x1 /* GPIO (IOMG7) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sdio_pmx_func: sdio_pmx_func {
+ pinctrl-single,pins = <
+ 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+ >;
+ };
+ sdio_pmx_idle: sdio_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0c4 0x1 /* GPIO (IOMG49) */
+ >;
+ };
+ audio_out_pmx_func: audio_out_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */
+ >;
+ };
+ };
+
+ pmx1: pinmux at fc803800 {
+ pinctrl-names = "default";
+ pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins
+ &board_np_pins &board_ps_pins &kpc_cfg_func
+ &audio_out_cfg_func>;
+ board_pu_pins: board_pu_pins {
+ pinctrl-single,pins = <
+ 0x014 0 /* GPIO_158 (IOCFG2) */
+ 0x018 0 /* GPIO_159 (IOCFG3) */
+ 0x01c 0 /* BOOT_MODE0 (IOCFG4) */
+ 0x020 0 /* BOOT_MODE1 (IOCFG5) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ };
+ board_pd_pins: board_pd_pins {
+ pinctrl-single,pins = <
+ 0x038 0 /* eFUSE_DOUT (IOCFG11) */
+ 0x150 0 /* ISP_GPIO8 (IOCFG93) */
+ 0x154 0 /* ISP_GPIO9 (IOCFG94) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_pd_ps_pins: board_pd_ps_pins {
+ pinctrl-single,pins = <
+ 0x2d8 0 /* CLK_OUT0 (IOCFG190) */
+ 0x004 0 /* PMU_SPI_DATA (IOCFG192) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ board_np_pins: board_np_pins {
+ pinctrl-single,pins = <
+ 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_ps_pins: board_ps_pins {
+ pinctrl-single,pins = <
+ 0x000 0 /* PMU_SPI_CLK (IOCFG191) */
+ 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */
+ >;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ uart0_cfg_func: uart0_cfg_func {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart0_cfg_idle: uart0_cfg_idle {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_func: uart1_cfg_func {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_idle: uart1_cfg_idle {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_func: uart2_cfg_func {
+ pinctrl-single,pins = <
+ 0x220 0 /* UART2_CTS (IOCFG144) */
+ 0x224 0 /* UART2_RTS (IOCFG145) */
+ 0x228 0 /* UART2_RXD (IOCFG146) */
+ 0x22c 0 /* UART2_TXD (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_idle: uart2_cfg_idle {
+ pinctrl-single,pins = <
+ 0x220 0 /* GPIO (IOCFG144) */
+ 0x224 0 /* GPIO (IOCFG145) */
+ 0x228 0 /* GPIO (IOCFG146) */
+ 0x22c 0 /* GPIO (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_func: uart3_cfg_func {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_idle: uart3_cfg_idle {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart4_cfg_func: uart4_cfg_func {
+ pinctrl-single,pins = <
+ 0x2a4 0 /* UART4_CTS (IOCFG177) */
+ 0x2a8 0 /* UART4_RTS (IOCFG178) */
+ 0x2ac 0 /* UART4_RXD (IOCFG179) */
+ 0x2b0 0 /* UART4_TXD (IOCFG180) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ i2c0_cfg_func: i2c0_cfg_func {
+ pinctrl-single,pins = <
+ 0x17c 0 /* I2C0_SCL (IOCFG103) */
+ 0x180 0 /* I2C0_SDA (IOCFG104) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c1_cfg_func: i2c1_cfg_func {
+ pinctrl-single,pins = <
+ 0x184 0 /* I2C1_SCL (IOCFG105) */
+ 0x188 0 /* I2C1_SDA (IOCFG106) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c2_cfg_func: i2c2_cfg_func {
+ pinctrl-single,pins = <
+ 0x118 0 /* I2C2_SCL (IOCFG79) */
+ 0x11c 0 /* I2C2_SDA (IOCFG80) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c3_cfg_func: i2c3_cfg_func {
+ pinctrl-single,pins = <
+ 0x100 0 /* I2C3_SCL (IOCFG73) */
+ 0x104 0 /* I2C3_SDA (IOCFG74) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func1: spi0_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x1d4 0 /* SPI0_CLK (IOCFG125) */
+ 0x1d8 0 /* SPI0_DI (IOCFG126) */
+ 0x1dc 0 /* SPI0_DO (IOCFG127) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func2: spi0_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x1e0 0 /* SPI0_CS0 (IOCFG128) */
+ 0x1e4 0 /* SPI0_CS1 (IOCFG129) */
+ 0x1e8 0 /* SPI0_CS2 (IOCFG130 */
+ 0x1ec 0 /* SPI0_CS3 (IOCFG131) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func1: spi1_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x1f0 0 /* SPI1_CLK (IOCFG132) */
+ 0x1f4 0 /* SPI1_DI (IOCFG133) */
+ 0x1f8 0 /* SPI1_DO (IOCFG134) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func2: spi1_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x1fc 0 /* SPI1_CS (IOCFG135) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ kpc_cfg_func: kpc_cfg_func {
+ pinctrl-single,pins = <
+ 0x250 0 /* KEY_IN0 (IOCFG156) */
+ 0x254 0 /* KEY_IN1 (IOCFG157) */
+ 0x258 0 /* KEY_IN2 (IOCFG158) */
+ 0x230 0 /* KEY_OUT0 (IOCFG148) */
+ 0x234 0 /* KEY_OUT1 (IOCFG149) */
+ 0x238 0 /* KEY_OUT2 (IOCFG150) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ emmc_cfg_func: emmc_cfg_func {
+ pinctrl-single,pins = <
+ 0x0ac 0 /* eMMC_CMD (IOCFG40) */
+ 0x0b0 0 /* eMMC_CLK (IOCFG41) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func1: sd_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x18c 0 /* SD_CLK (IOCFG107) */
+ 0x190 0 /* SD_CMD (IOCFG108) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func2: sd_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x194 0 /* SD_DATA0 (IOCFG109) */
+ 0x198 0 /* SD_DATA1 (IOCFG110) */
+ 0x19c 0 /* SD_DATA2 (IOCFG111) */
+ 0x1a0 0 /* SD_DATA3 (IOCFG112) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x70 0xf0>;
+ };
+ nand_cfg_func1: nand_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x03c 0 /* NAND_ALE (IOCFG12) */
+ 0x040 0 /* NAND_CLE (IOCFG13) */
+ 0x06c 0 /* NAND_DATA0 (IOCFG24) */
+ 0x070 0 /* NAND_DATA1 (IOCFG25) */
+ 0x074 0 /* NAND_DATA2 (IOCFG26) */
+ 0x078 0 /* NAND_DATA3 (IOCFG27) */
+ 0x07c 0 /* NAND_DATA4 (IOCFG28) */
+ 0x080 0 /* NAND_DATA5 (IOCFG29) */
+ 0x084 0 /* NAND_DATA6 (IOCFG30) */
+ 0x088 0 /* NAND_DATA7 (IOCFG31) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ nand_cfg_func2: nand_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x044 0 /* NAND_RE_N (IOCFG14) */
+ 0x048 0 /* NAND_WE_N (IOCFG15) */
+ 0x04c 0 /* NAND_CS0_N (IOCFG16) */
+ 0x050 0 /* NAND_CS1_N (IOCFG17) */
+ 0x054 0 /* NAND_CS2_N (IOCFG18) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */
+ 0x060 0 /* NAND_BUSY1_N (IOCFG21) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sdio_cfg_func: sdio_cfg_func {
+ pinctrl-single,pins = <
+ 0x1a4 0 /* SDIO0_CLK (IOCG113) */
+ 0x1a8 0 /* SDIO0_CMD (IOCG114) */
+ 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */
+ 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */
+ 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */
+ 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ audio_out_cfg_func: audio_out_cfg_func {
+ pinctrl-single,pins = <
+ 0x200 0 /* GPIO (IOCFG136) */
+ 0x204 0 /* GPIO (IOCFG137) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ };
+ };
+};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread