* [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
@ 2013-04-30 12:45 ` Fabio Baltieri
0 siblings, 0 replies; 10+ messages in thread
From: Fabio Baltieri @ 2013-04-30 12:45 UTC (permalink / raw)
To: linux-arm-kernel
Fix clk_reg_sysctrl() to set main clock registers of new struct
clk_sysctrl even if the registered clock has no parents.
This fixes an issue where "ulpclk" was registered with all clk->reg_*
fields uninitialized, causing a -EINVAL error from clk_prepare().
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
index bc7e9bd..e364c9d 100644
--- a/drivers/clk/ux500/clk-sysctrl.c
+++ b/drivers/clk/ux500/clk-sysctrl.c
@@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
return ERR_PTR(-ENOMEM);
}
- for (i = 0; i < num_parents; i++) {
+ /* set main clock registers */
+ clk->reg_sel[0] = reg_sel[0];
+ clk->reg_bits[0] = reg_bits[0];
+ clk->reg_mask[0] = reg_mask[0];
+
+ /* handle clocks with more than one parent */
+ for (i = 1; i < num_parents; i++) {
clk->reg_sel[i] = reg_sel[i];
clk->reg_bits[i] = reg_bits[i];
clk->reg_mask[i] = reg_mask[i];
--
1.8.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
@ 2013-04-30 12:45 ` Fabio Baltieri
0 siblings, 0 replies; 10+ messages in thread
From: Fabio Baltieri @ 2013-04-30 12:45 UTC (permalink / raw)
To: Mike Turquette, Ulf Hansson
Cc: linux-arm-kernel, linux-kernel, Linus Walleij, Lee Jones,
Fabio Baltieri
Fix clk_reg_sysctrl() to set main clock registers of new struct
clk_sysctrl even if the registered clock has no parents.
This fixes an issue where "ulpclk" was registered with all clk->reg_*
fields uninitialized, causing a -EINVAL error from clk_prepare().
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
index bc7e9bd..e364c9d 100644
--- a/drivers/clk/ux500/clk-sysctrl.c
+++ b/drivers/clk/ux500/clk-sysctrl.c
@@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
return ERR_PTR(-ENOMEM);
}
- for (i = 0; i < num_parents; i++) {
+ /* set main clock registers */
+ clk->reg_sel[0] = reg_sel[0];
+ clk->reg_bits[0] = reg_bits[0];
+ clk->reg_mask[0] = reg_mask[0];
+
+ /* handle clocks with more than one parent */
+ for (i = 1; i < num_parents; i++) {
clk->reg_sel[i] = reg_sel[i];
clk->reg_bits[i] = reg_bits[i];
clk->reg_mask[i] = reg_mask[i];
--
1.8.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
2013-04-30 12:45 ` Fabio Baltieri
@ 2013-05-03 8:51 ` Ulf Hansson
-1 siblings, 0 replies; 10+ messages in thread
From: Ulf Hansson @ 2013-05-03 8:51 UTC (permalink / raw)
To: linux-arm-kernel
On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
> Fix clk_reg_sysctrl() to set main clock registers of new struct
> clk_sysctrl even if the registered clock has no parents.
>
> This fixes an issue where "ulpclk" was registered with all clk->reg_*
> fields uninitialized, causing a -EINVAL error from clk_prepare().
>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> ---
> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
> index bc7e9bd..e364c9d 100644
> --- a/drivers/clk/ux500/clk-sysctrl.c
> +++ b/drivers/clk/ux500/clk-sysctrl.c
> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
> return ERR_PTR(-ENOMEM);
> }
>
> - for (i = 0; i < num_parents; i++) {
> + /* set main clock registers */
> + clk->reg_sel[0] = reg_sel[0];
> + clk->reg_bits[0] = reg_bits[0];
> + clk->reg_mask[0] = reg_mask[0];
> +
> + /* handle clocks with more than one parent */
> + for (i = 1; i < num_parents; i++) {
> clk->reg_sel[i] = reg_sel[i];
> clk->reg_bits[i] = reg_bits[i];
> clk->reg_mask[i] = reg_mask[i];
> --
> 1.8.2
>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
This is bugfix, should go "stable" as well?
Kind regards
Ulf Hansson
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
@ 2013-05-03 8:51 ` Ulf Hansson
0 siblings, 0 replies; 10+ messages in thread
From: Ulf Hansson @ 2013-05-03 8:51 UTC (permalink / raw)
To: Fabio Baltieri
Cc: Mike Turquette, linux-arm-kernel, linux-kernel, Linus Walleij,
Lee Jones
On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
> Fix clk_reg_sysctrl() to set main clock registers of new struct
> clk_sysctrl even if the registered clock has no parents.
>
> This fixes an issue where "ulpclk" was registered with all clk->reg_*
> fields uninitialized, causing a -EINVAL error from clk_prepare().
>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> ---
> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
> index bc7e9bd..e364c9d 100644
> --- a/drivers/clk/ux500/clk-sysctrl.c
> +++ b/drivers/clk/ux500/clk-sysctrl.c
> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
> return ERR_PTR(-ENOMEM);
> }
>
> - for (i = 0; i < num_parents; i++) {
> + /* set main clock registers */
> + clk->reg_sel[0] = reg_sel[0];
> + clk->reg_bits[0] = reg_bits[0];
> + clk->reg_mask[0] = reg_mask[0];
> +
> + /* handle clocks with more than one parent */
> + for (i = 1; i < num_parents; i++) {
> clk->reg_sel[i] = reg_sel[i];
> clk->reg_bits[i] = reg_bits[i];
> clk->reg_mask[i] = reg_mask[i];
> --
> 1.8.2
>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
This is bugfix, should go "stable" as well?
Kind regards
Ulf Hansson
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
2013-05-03 8:51 ` Ulf Hansson
@ 2013-05-03 8:54 ` Ulf Hansson
-1 siblings, 0 replies; 10+ messages in thread
From: Ulf Hansson @ 2013-05-03 8:54 UTC (permalink / raw)
To: linux-arm-kernel
On 3 May 2013 10:51, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
>> Fix clk_reg_sysctrl() to set main clock registers of new struct
>> clk_sysctrl even if the registered clock has no parents.
>>
>> This fixes an issue where "ulpclk" was registered with all clk->reg_*
>> fields uninitialized, causing a -EINVAL error from clk_prepare().
>>
>> Cc: Ulf Hansson <ulf.hansson@linaro.org>
>> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
>> ---
>> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
>> index bc7e9bd..e364c9d 100644
>> --- a/drivers/clk/ux500/clk-sysctrl.c
>> +++ b/drivers/clk/ux500/clk-sysctrl.c
>> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
>> return ERR_PTR(-ENOMEM);
>> }
>>
>> - for (i = 0; i < num_parents; i++) {
>> + /* set main clock registers */
>> + clk->reg_sel[0] = reg_sel[0];
>> + clk->reg_bits[0] = reg_bits[0];
>> + clk->reg_mask[0] = reg_mask[0];
>> +
>> + /* handle clocks with more than one parent */
>> + for (i = 1; i < num_parents; i++) {
>> clk->reg_sel[i] = reg_sel[i];
>> clk->reg_bits[i] = reg_bits[i];
>> clk->reg_mask[i] = reg_mask[i];
>> --
>> 1.8.2
>>
>
> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
>
> This is bugfix, should go "stable" as well?
Stable means 3.10 rcs, since the abx500 clk tree was added for 3.10.
>
> Kind regards
> Ulf Hansson
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
@ 2013-05-03 8:54 ` Ulf Hansson
0 siblings, 0 replies; 10+ messages in thread
From: Ulf Hansson @ 2013-05-03 8:54 UTC (permalink / raw)
To: Fabio Baltieri
Cc: Mike Turquette, linux-arm-kernel, linux-kernel, Linus Walleij,
Lee Jones
On 3 May 2013 10:51, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
>> Fix clk_reg_sysctrl() to set main clock registers of new struct
>> clk_sysctrl even if the registered clock has no parents.
>>
>> This fixes an issue where "ulpclk" was registered with all clk->reg_*
>> fields uninitialized, causing a -EINVAL error from clk_prepare().
>>
>> Cc: Ulf Hansson <ulf.hansson@linaro.org>
>> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
>> ---
>> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
>> index bc7e9bd..e364c9d 100644
>> --- a/drivers/clk/ux500/clk-sysctrl.c
>> +++ b/drivers/clk/ux500/clk-sysctrl.c
>> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
>> return ERR_PTR(-ENOMEM);
>> }
>>
>> - for (i = 0; i < num_parents; i++) {
>> + /* set main clock registers */
>> + clk->reg_sel[0] = reg_sel[0];
>> + clk->reg_bits[0] = reg_bits[0];
>> + clk->reg_mask[0] = reg_mask[0];
>> +
>> + /* handle clocks with more than one parent */
>> + for (i = 1; i < num_parents; i++) {
>> clk->reg_sel[i] = reg_sel[i];
>> clk->reg_bits[i] = reg_bits[i];
>> clk->reg_mask[i] = reg_mask[i];
>> --
>> 1.8.2
>>
>
> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
>
> This is bugfix, should go "stable" as well?
Stable means 3.10 rcs, since the abx500 clk tree was added for 3.10.
>
> Kind regards
> Ulf Hansson
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
2013-05-03 8:54 ` Ulf Hansson
@ 2013-05-03 9:03 ` Fabio Baltieri
-1 siblings, 0 replies; 10+ messages in thread
From: Fabio Baltieri @ 2013-05-03 9:03 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 03, 2013 at 10:54:09AM +0200, Ulf Hansson wrote:
> On 3 May 2013 10:51, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
> >> Fix clk_reg_sysctrl() to set main clock registers of new struct
> >> clk_sysctrl even if the registered clock has no parents.
> >>
> >> This fixes an issue where "ulpclk" was registered with all clk->reg_*
> >> fields uninitialized, causing a -EINVAL error from clk_prepare().
> >>
> >> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> >> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> >> ---
> >> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
> >> 1 file changed, 7 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
> >> index bc7e9bd..e364c9d 100644
> >> --- a/drivers/clk/ux500/clk-sysctrl.c
> >> +++ b/drivers/clk/ux500/clk-sysctrl.c
> >> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
> >> return ERR_PTR(-ENOMEM);
> >> }
> >>
> >> - for (i = 0; i < num_parents; i++) {
> >> + /* set main clock registers */
> >> + clk->reg_sel[0] = reg_sel[0];
> >> + clk->reg_bits[0] = reg_bits[0];
> >> + clk->reg_mask[0] = reg_mask[0];
> >> +
> >> + /* handle clocks with more than one parent */
> >> + for (i = 1; i < num_parents; i++) {
> >> clk->reg_sel[i] = reg_sel[i];
> >> clk->reg_bits[i] = reg_bits[i];
> >> clk->reg_mask[i] = reg_mask[i];
> >> --
> >> 1.8.2
> >>
> >
> > Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
> >
> > This is bugfix, should go "stable" as well?
>
> Stable means 3.10 rcs, since the abx500 clk tree was added for 3.10.
Thanks! Yes, it would be great if this could be queued up for an -rc.
Fabio
--
Fabio Baltieri
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
@ 2013-05-03 9:03 ` Fabio Baltieri
0 siblings, 0 replies; 10+ messages in thread
From: Fabio Baltieri @ 2013-05-03 9:03 UTC (permalink / raw)
To: Ulf Hansson, Mike Turquette
Cc: linux-arm-kernel, linux-kernel, Linus Walleij, Lee Jones
On Fri, May 03, 2013 at 10:54:09AM +0200, Ulf Hansson wrote:
> On 3 May 2013 10:51, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
> >> Fix clk_reg_sysctrl() to set main clock registers of new struct
> >> clk_sysctrl even if the registered clock has no parents.
> >>
> >> This fixes an issue where "ulpclk" was registered with all clk->reg_*
> >> fields uninitialized, causing a -EINVAL error from clk_prepare().
> >>
> >> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> >> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> >> ---
> >> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
> >> 1 file changed, 7 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
> >> index bc7e9bd..e364c9d 100644
> >> --- a/drivers/clk/ux500/clk-sysctrl.c
> >> +++ b/drivers/clk/ux500/clk-sysctrl.c
> >> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
> >> return ERR_PTR(-ENOMEM);
> >> }
> >>
> >> - for (i = 0; i < num_parents; i++) {
> >> + /* set main clock registers */
> >> + clk->reg_sel[0] = reg_sel[0];
> >> + clk->reg_bits[0] = reg_bits[0];
> >> + clk->reg_mask[0] = reg_mask[0];
> >> +
> >> + /* handle clocks with more than one parent */
> >> + for (i = 1; i < num_parents; i++) {
> >> clk->reg_sel[i] = reg_sel[i];
> >> clk->reg_bits[i] = reg_bits[i];
> >> clk->reg_mask[i] = reg_mask[i];
> >> --
> >> 1.8.2
> >>
> >
> > Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
> >
> > This is bugfix, should go "stable" as well?
>
> Stable means 3.10 rcs, since the abx500 clk tree was added for 3.10.
Thanks! Yes, it would be great if this could be queued up for an -rc.
Fabio
--
Fabio Baltieri
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
2013-05-03 9:03 ` Fabio Baltieri
@ 2013-05-14 19:06 ` Mike Turquette
-1 siblings, 0 replies; 10+ messages in thread
From: Mike Turquette @ 2013-05-14 19:06 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Fabio Baltieri (2013-05-03 02:03:05)
> On Fri, May 03, 2013 at 10:54:09AM +0200, Ulf Hansson wrote:
> > On 3 May 2013 10:51, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > > On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
> > >> Fix clk_reg_sysctrl() to set main clock registers of new struct
> > >> clk_sysctrl even if the registered clock has no parents.
> > >>
> > >> This fixes an issue where "ulpclk" was registered with all clk->reg_*
> > >> fields uninitialized, causing a -EINVAL error from clk_prepare().
> > >>
> > >> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> > >> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> > >> ---
> > >> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
> > >> 1 file changed, 7 insertions(+), 1 deletion(-)
> > >>
> > >> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
> > >> index bc7e9bd..e364c9d 100644
> > >> --- a/drivers/clk/ux500/clk-sysctrl.c
> > >> +++ b/drivers/clk/ux500/clk-sysctrl.c
> > >> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
> > >> return ERR_PTR(-ENOMEM);
> > >> }
> > >>
> > >> - for (i = 0; i < num_parents; i++) {
> > >> + /* set main clock registers */
> > >> + clk->reg_sel[0] = reg_sel[0];
> > >> + clk->reg_bits[0] = reg_bits[0];
> > >> + clk->reg_mask[0] = reg_mask[0];
> > >> +
> > >> + /* handle clocks with more than one parent */
> > >> + for (i = 1; i < num_parents; i++) {
> > >> clk->reg_sel[i] = reg_sel[i];
> > >> clk->reg_bits[i] = reg_bits[i];
> > >> clk->reg_mask[i] = reg_mask[i];
> > >> --
> > >> 1.8.2
> > >>
> > >
> > > Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
> > >
> > > This is bugfix, should go "stable" as well?
> >
> > Stable means 3.10 rcs, since the abx500 clk tree was added for 3.10.
>
> Thanks! Yes, it would be great if this could be queued up for an -rc.
>
Taken into clk-fixes.
Thanks!
Mike
> Fabio
>
> --
> Fabio Baltieri
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents
@ 2013-05-14 19:06 ` Mike Turquette
0 siblings, 0 replies; 10+ messages in thread
From: Mike Turquette @ 2013-05-14 19:06 UTC (permalink / raw)
To: Fabio Baltieri, Ulf Hansson
Cc: linux-arm-kernel, linux-kernel, Linus Walleij, Lee Jones
Quoting Fabio Baltieri (2013-05-03 02:03:05)
> On Fri, May 03, 2013 at 10:54:09AM +0200, Ulf Hansson wrote:
> > On 3 May 2013 10:51, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > > On 30 April 2013 14:45, Fabio Baltieri <fabio.baltieri@linaro.org> wrote:
> > >> Fix clk_reg_sysctrl() to set main clock registers of new struct
> > >> clk_sysctrl even if the registered clock has no parents.
> > >>
> > >> This fixes an issue where "ulpclk" was registered with all clk->reg_*
> > >> fields uninitialized, causing a -EINVAL error from clk_prepare().
> > >>
> > >> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> > >> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> > >> ---
> > >> drivers/clk/ux500/clk-sysctrl.c | 8 +++++++-
> > >> 1 file changed, 7 insertions(+), 1 deletion(-)
> > >>
> > >> diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
> > >> index bc7e9bd..e364c9d 100644
> > >> --- a/drivers/clk/ux500/clk-sysctrl.c
> > >> +++ b/drivers/clk/ux500/clk-sysctrl.c
> > >> @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
> > >> return ERR_PTR(-ENOMEM);
> > >> }
> > >>
> > >> - for (i = 0; i < num_parents; i++) {
> > >> + /* set main clock registers */
> > >> + clk->reg_sel[0] = reg_sel[0];
> > >> + clk->reg_bits[0] = reg_bits[0];
> > >> + clk->reg_mask[0] = reg_mask[0];
> > >> +
> > >> + /* handle clocks with more than one parent */
> > >> + for (i = 1; i < num_parents; i++) {
> > >> clk->reg_sel[i] = reg_sel[i];
> > >> clk->reg_bits[i] = reg_bits[i];
> > >> clk->reg_mask[i] = reg_mask[i];
> > >> --
> > >> 1.8.2
> > >>
> > >
> > > Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
> > >
> > > This is bugfix, should go "stable" as well?
> >
> > Stable means 3.10 rcs, since the abx500 clk tree was added for 3.10.
>
> Thanks! Yes, it would be great if this could be queued up for an -rc.
>
Taken into clk-fixes.
Thanks!
Mike
> Fabio
>
> --
> Fabio Baltieri
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-05-14 19:06 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-30 12:45 [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents Fabio Baltieri
2013-04-30 12:45 ` Fabio Baltieri
2013-05-03 8:51 ` Ulf Hansson
2013-05-03 8:51 ` Ulf Hansson
2013-05-03 8:54 ` Ulf Hansson
2013-05-03 8:54 ` Ulf Hansson
2013-05-03 9:03 ` Fabio Baltieri
2013-05-03 9:03 ` Fabio Baltieri
2013-05-14 19:06 ` Mike Turquette
2013-05-14 19:06 ` Mike Turquette
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.