From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 1/3] drm/i915: Disable primary plane trickle feed for g4x
Date: Tue, 21 May 2013 15:35:06 +0300 [thread overview]
Message-ID: <20130521123506.GA16772@intel.com> (raw)
In-Reply-To: <1369139314-3003-2-git-send-email-ville.syrjala@linux.intel.com>
On Tue, May 21, 2013 at 03:28:32PM +0300, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> The docs say that the trickle feed disable bit is present (for primary
> planes only, not video sprites) on CTG, and that it must be set
> for ELK. Just set it for all g4x chipsets.
>
> v2: Do it in init_clock_gating too
Actually I just noticed that we don't set up this stuff in
ironlake_init_clock_gating() either. Any opinions whether I should just
kill the per-plane trickle feed stuff from *_init_clock_gating(), or
should I add it to ironlake_init_clock_gating() as well?
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 3 +++
> drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 684ab64..c8b033a 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2041,6 +2041,9 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> dspcntr &= ~DISPPLANE_TILED;
> }
>
> + if (IS_G4X(dev))
> + dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
> +
> I915_WRITE(reg, dspcntr);
>
> linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 8a90cf3..cf0f658 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4390,6 +4390,7 @@ static void g4x_init_clock_gating(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> uint32_t dspclk_gate;
> + int pipe;
>
> I915_WRITE(RENCLK_GATE_D1, 0);
> I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
> @@ -4406,6 +4407,14 @@ static void g4x_init_clock_gating(struct drm_device *dev)
> /* WaDisableRenderCachePipelinedFlush */
> I915_WRITE(CACHE_MODE_0,
> _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
> +
> + for_each_pipe(pipe) {
> + I915_WRITE(DSPCNTR(pipe),
> + I915_READ(DSPCNTR(pipe)) |
> + DISPPLANE_TRICKLE_FEED_DISABLE);
> + intel_flush_display_plane(dev_priv, pipe);
> + }
> +
> }
>
> static void crestline_init_clock_gating(struct drm_device *dev)
> --
> 1.8.1.5
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2013-05-21 12:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-21 12:28 [PATCH 0/3] drm/i915: Trickle feed bits ville.syrjala
2013-05-21 12:28 ` [PATCH v2 1/3] drm/i915: Disable primary plane trickle feed for g4x ville.syrjala
2013-05-21 12:35 ` Ville Syrjälä [this message]
2013-05-21 12:52 ` Daniel Vetter
2013-05-21 14:43 ` Ville Syrjälä
2013-06-04 14:12 ` Chris Wilson
2013-05-21 12:28 ` [PATCH 2/3] drm/i915: Disable trickle feed via MI_ARB_STATE for gen4 ville.syrjala
2013-06-04 14:13 ` Chris Wilson
2013-05-21 12:28 ` [PATCH 3/3] drm/i915: Try harder to disable trickle feed on VLV ville.syrjala
2013-06-04 14:19 ` Chris Wilson
2013-06-04 15:55 ` Ville Syrjälä
2013-05-21 14:47 ` [PATCH] drm/i915: Disable trickle feed in ironlake_init_clock_gating() ville.syrjala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130521123506.GA16772@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.