* [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board @ 2013-02-04 22:26 Alexandre Belloni 2013-02-04 22:26 ` [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 Alexandre Belloni 2013-04-28 18:57 ` [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board Peter Korsgaard 0 siblings, 2 replies; 9+ messages in thread From: Alexandre Belloni @ 2013-02-04 22:26 UTC (permalink / raw) To: buildroot Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> --- configs/at91sam9g45m10ek_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 configs/at91sam9g45m10ek_defconfig diff --git a/configs/at91sam9g45m10ek_defconfig b/configs/at91sam9g45m10ek_defconfig new file mode 100644 index 0000000..c958859 --- /dev/null +++ b/configs/at91sam9g45m10ek_defconfig @@ -0,0 +1,9 @@ +BR2_arm=y +BR2_arm926t=y +BR2_PACKAGE_HOST_SAM_BA=y +BR2_TARGET_AT91BOOTSTRAP=y +BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9m10g45ek" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="at91sam9m10g45ek_nandflash" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_DEFCONFIG="at91sam9g45" -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 2013-02-04 22:26 [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board Alexandre Belloni @ 2013-02-04 22:26 ` Alexandre Belloni 2013-02-04 22:51 ` Thomas Petazzoni 2013-04-28 19:00 ` Peter Korsgaard 2013-04-28 18:57 ` [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board Peter Korsgaard 1 sibling, 2 replies; 9+ messages in thread From: Alexandre Belloni @ 2013-02-04 22:26 UTC (permalink / raw) To: buildroot Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> --- package/multimedia/Config.in | 2 ++ package/multimedia/gst-plugin-x170/Config.in | 10 ++++++++++ .../multimedia/gst-plugin-x170/gst-plugin-x170.mk | 11 +++++++++++ package/multimedia/on2-8170-libs/Config.in | 5 +++++ package/multimedia/on2-8170-libs/on2-8170-libs.mk | 20 ++++++++++++++++++++ 5 files changed, 48 insertions(+) create mode 100644 package/multimedia/gst-plugin-x170/Config.in create mode 100644 package/multimedia/gst-plugin-x170/gst-plugin-x170.mk create mode 100644 package/multimedia/on2-8170-libs/Config.in create mode 100644 package/multimedia/on2-8170-libs/on2-8170-libs.mk diff --git a/package/multimedia/Config.in b/package/multimedia/Config.in index 931e6d3..e13e9da 100644 --- a/package/multimedia/Config.in +++ b/package/multimedia/Config.in @@ -14,12 +14,14 @@ source "package/multimedia/gst-plugins-base/Config.in" source "package/multimedia/gst-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in" source "package/multimedia/gst-plugins-ugly/Config.in" +source "package/multimedia/gst-plugin-x170/Config.in" source "package/multimedia/lame/Config.in" source "package/multimedia/madplay/Config.in" source "package/multimedia/mpd/Config.in" source "package/multimedia/mpg123/Config.in" source "package/multimedia/mplayer/Config.in" source "package/multimedia/musepack/Config.in" +source "package/multimedia/on2-8170-libs/Config.in" source "package/opus-tools/Config.in" source "package/multimedia/pulseaudio/Config.in" source "package/multimedia/tidsp-binaries/Config.in" diff --git a/package/multimedia/gst-plugin-x170/Config.in b/package/multimedia/gst-plugin-x170/Config.in new file mode 100644 index 0000000..abbfa5e --- /dev/null +++ b/package/multimedia/gst-plugin-x170/Config.in @@ -0,0 +1,10 @@ +config BR2_PACKAGE_GST_PLUGIN_X170 + bool "gst-plugin-x170" + depends on BR2_PACKAGE_GSTREAMER + select BR2_PACKAGE_ON2_8170_LIBS + help + GStreamer plug-in to use the Hantro X170 video decoder present on + ATMEL AT91SAM9M10 SoC. + + http://www.at91.com/linux4sam/bin/view/Linux4SAM/SAM9M10Gstreamer + diff --git a/package/multimedia/gst-plugin-x170/gst-plugin-x170.mk b/package/multimedia/gst-plugin-x170/gst-plugin-x170.mk new file mode 100644 index 0000000..0e14185 --- /dev/null +++ b/package/multimedia/gst-plugin-x170/gst-plugin-x170.mk @@ -0,0 +1,11 @@ +GST_PLUGIN_X170_VERSION=1.0 +GST_PLUGIN_X170_SOURCE=gst-plugin-x170-$(GST_PLUGIN_X170_VERSION).tar.gz +GST_PLUGIN_X170_SITE=ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/ + +GST_PLUGIN_X170_AUTORECONF = YES +GST_PLUGIN_X170_AUTORECONF_OPT = -Im4/ +GST_PLUGIN_X170_DEPENDENCIES = gstreamer libglib2 on2-8170-libs + +GST_PLUGIN_X170_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include/glib-2.0 -I$(STAGING_DIR)/usr/lib/glib-2.0/include -I$(STAGING_DIR)/usr/include/gstreamer-0.10 -I$(STAGING_DIR)/usr/include/libxml2/" + +$(eval $(autotools-package)) diff --git a/package/multimedia/on2-8170-libs/Config.in b/package/multimedia/on2-8170-libs/Config.in new file mode 100644 index 0000000..35eb628 --- /dev/null +++ b/package/multimedia/on2-8170-libs/Config.in @@ -0,0 +1,5 @@ +config BR2_PACKAGE_ON2_8170_LIBS + bool "on2-8170-libs" + help + Libraries for Hantro X170 video decoder + diff --git a/package/multimedia/on2-8170-libs/on2-8170-libs.mk b/package/multimedia/on2-8170-libs/on2-8170-libs.mk new file mode 100644 index 0000000..edb1c5d --- /dev/null +++ b/package/multimedia/on2-8170-libs/on2-8170-libs.mk @@ -0,0 +1,20 @@ +ON2_8170_LIBS_VERSION=1.0 +ON2_8170_LIBS_SOURCE=on2-8170-libs-$(ON2_8170_LIBS_VERSION).tar.gz +ON2_8170_LIBS_SITE=ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/ + +ON2_8170_LIBS_INSTALL_STAGING = YES + +define ON2_8170_LIBS_BUILD_CMDS +endef + +define ON2_8170_LIBS_INSTALL_STAGING_CMDS + $(INSTALL) -D -m 0755 $(@D)/*.a $(STAGING_DIR)/usr/lib + $(INSTALL) -D -m 0644 $(@D)/*.h $(STAGING_DIR)/usr/include + $(INSTALL) -D -m 0755 $(@D)/*.so $(STAGING_DIR)/usr/lib +endef + +define ON2_8170_LIBS_INSTALL_TARGET_CMDS + $(INSTALL) -D -m 0755 $(@D)/*.so $(TARGET_DIR)/usr/lib +endef + +$(eval $(generic-package)) -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 2013-02-04 22:26 ` [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 Alexandre Belloni @ 2013-02-04 22:51 ` Thomas Petazzoni 2013-02-05 20:41 ` Alexandre Belloni 2013-04-29 13:12 ` Simon Dawson 2013-04-28 19:00 ` Peter Korsgaard 1 sibling, 2 replies; 9+ messages in thread From: Thomas Petazzoni @ 2013-02-04 22:51 UTC (permalink / raw) To: buildroot Dear Alexandre Belloni, On Mon, 4 Feb 2013 23:26:13 +0100, Alexandre Belloni wrote: > --- /dev/null > +++ b/package/multimedia/gst-plugin-x170/Config.in > @@ -0,0 +1,10 @@ > +config BR2_PACKAGE_GST_PLUGIN_X170 > + bool "gst-plugin-x170" > + depends on BR2_PACKAGE_GSTREAMER A "depends on BR2_arm" should be added here. We generally try to hide such architecture-specific packages when they really don't make sense. Of course, technically speaking, it should only appear if the SoC is an AT91 SoC that has this specific video unit, but we are not able to do that with the existing Buildroot options. But we still try to make such options depend on BR2_arm. > diff --git a/package/multimedia/gst-plugin-x170/gst-plugin-x170.mk b/package/multimedia/gst-plugin-x170/gst-plugin-x170.mk > new file mode 100644 > index 0000000..0e14185 > --- /dev/null > +++ b/package/multimedia/gst-plugin-x170/gst-plugin-x170.mk > @@ -0,0 +1,11 @@ Missing comment header. > +GST_PLUGIN_X170_VERSION=1.0 > +GST_PLUGIN_X170_SOURCE=gst-plugin-x170-$(GST_PLUGIN_X170_VERSION).tar.gz > +GST_PLUGIN_X170_SITE=ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/ Spaces before and after the equal sign. <foo>_SOURCE line not beeded since it's the default value. > + > +GST_PLUGIN_X170_AUTORECONF = YES > +GST_PLUGIN_X170_AUTORECONF_OPT = -Im4/ Please add a justification here in a short comment before the _AUTORECONF option to explain why it's needed. Normally, it's not needed for tarballs when no patches are applied, so we try to give a short justification through a comment. > +GST_PLUGIN_X170_DEPENDENCIES = gstreamer libglib2 on2-8170-libs > + > +GST_PLUGIN_X170_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include/glib-2.0 -I$(STAGING_DIR)/usr/lib/glib-2.0/include -I$(STAGING_DIR)/usr/include/gstreamer-0.10 -I$(STAGING_DIR)/usr/include/libxml2/" Isn't the configure script capable it detecting those libraries? What fails if you don't add all those -I values? > + > +$(eval $(autotools-package)) > diff --git a/package/multimedia/on2-8170-libs/Config.in b/package/multimedia/on2-8170-libs/Config.in > new file mode 100644 > index 0000000..35eb628 > --- /dev/null > +++ b/package/multimedia/on2-8170-libs/Config.in > @@ -0,0 +1,5 @@ > +config BR2_PACKAGE_ON2_8170_LIBS > + bool "on2-8170-libs" depends on BR2_arm. > + help > + Libraries for Hantro X170 video decoder > + Link to an upstream URL. Could probably be the same as the other package. > diff --git a/package/multimedia/on2-8170-libs/on2-8170-libs.mk b/package/multimedia/on2-8170-libs/on2-8170-libs.mk > new file mode 100644 > index 0000000..edb1c5d > --- /dev/null > +++ b/package/multimedia/on2-8170-libs/on2-8170-libs.mk > @@ -0,0 +1,20 @@ Comment header. > +ON2_8170_LIBS_VERSION=1.0 > +ON2_8170_LIBS_SOURCE=on2-8170-libs-$(ON2_8170_LIBS_VERSION).tar.gz > +ON2_8170_LIBS_SITE=ftp://ftp.linux4sam.org/pub/demo/linux4sam_1.9/codec/ Spaces before and after =. The _SOURCE value is the default, so you can get rid of it. > + > +ON2_8170_LIBS_INSTALL_STAGING = YES > + > +define ON2_8170_LIBS_BUILD_CMDS > +endef If it's empty, then it's not needed. The default _BUILD_CMDS for a generic-package is empty anyway. > +define ON2_8170_LIBS_INSTALL_STAGING_CMDS > + $(INSTALL) -D -m 0755 $(@D)/*.a $(STAGING_DIR)/usr/lib > + $(INSTALL) -D -m 0644 $(@D)/*.h $(STAGING_DIR)/usr/include > + $(INSTALL) -D -m 0755 $(@D)/*.so $(STAGING_DIR)/usr/lib > +endef > + > +define ON2_8170_LIBS_INSTALL_TARGET_CMDS > + $(INSTALL) -D -m 0755 $(@D)/*.so $(TARGET_DIR)/usr/lib > +endef If you use -D, then you must path a complete path as a second argument. Otherwise, if the destination directory doesn't exist, then your file will be copied as the directory name. I.e, you "libblabla.so" would be a file named "lib" under the usr/ directory. If we want to do a wildcard-based copy of files, I don't think install plays really well. We generally do a 'cp' instead in this case, but maybe others could comment on this specific point. Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 2013-02-04 22:51 ` Thomas Petazzoni @ 2013-02-05 20:41 ` Alexandre Belloni 2013-04-29 13:12 ` Simon Dawson 1 sibling, 0 replies; 9+ messages in thread From: Alexandre Belloni @ 2013-02-05 20:41 UTC (permalink / raw) To: buildroot Hi, On Mon, Feb 04, 2013 at 11:51:09PM +0100, Thomas Petazzoni wrote : > > + > > +GST_PLUGIN_X170_AUTORECONF = YES > > +GST_PLUGIN_X170_AUTORECONF_OPT = -Im4/ > > Please add a justification here in a short comment before the > _AUTORECONF option to explain why it's needed. Normally, it's not > needed for tarballs when no patches are applied, so we try to give a > short justification through a comment. > There is no configure script in the archive so you basically have to run autoreconf to be able to build. > > +GST_PLUGIN_X170_DEPENDENCIES = gstreamer libglib2 on2-8170-libs > > + > > +GST_PLUGIN_X170_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include/glib-2.0 -I$(STAGING_DIR)/usr/lib/glib-2.0/include -I$(STAGING_DIR)/usr/include/gstreamer-0.10 -I$(STAGING_DIR)/usr/include/libxml2/" > > Isn't the configure script capable it detecting those libraries? What > fails if you don't add all those -I values? > The configure script itself seems to be able to find the includes correctly but the include path is limited to . and .. when compiling so I had to force the -I at configure. It may be related to the way I'm using autoreconf. I think that package is expectig you to use gst-autogen.sh to do that but I could'nt get that to work. -- Alexandre Belloni ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 2013-02-04 22:51 ` Thomas Petazzoni 2013-02-05 20:41 ` Alexandre Belloni @ 2013-04-29 13:12 ` Simon Dawson 2013-04-29 13:20 ` Peter Korsgaard 1 sibling, 1 reply; 9+ messages in thread From: Simon Dawson @ 2013-04-29 13:12 UTC (permalink / raw) To: buildroot On 4 February 2013 22:51, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Dear Alexandre Belloni, > > On Mon, 4 Feb 2013 23:26:13 +0100, Alexandre Belloni wrote: >> --- /dev/null >> +++ b/package/multimedia/gst-plugin-x170/Config.in >> @@ -0,0 +1,10 @@ >> +config BR2_PACKAGE_GST_PLUGIN_X170 >> + bool "gst-plugin-x170" >> + depends on BR2_PACKAGE_GSTREAMER > > A "depends on BR2_arm" should be added here. We generally try to hide > such architecture-specific packages when they really don't make sense. > Of course, technically speaking, it should only appear if the SoC is an > AT91 SoC that has this specific video unit, but we are not able to do > that with the existing Buildroot options. But we still try to make such > options depend on BR2_arm. I think it's ARM9 only, so we can probably be slightly more specific: depends on (BR2_arm920t || BR2_arm922t || BR2_arm926t) Simon ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 2013-04-29 13:12 ` Simon Dawson @ 2013-04-29 13:20 ` Peter Korsgaard 0 siblings, 0 replies; 9+ messages in thread From: Peter Korsgaard @ 2013-04-29 13:20 UTC (permalink / raw) To: buildroot >>>>> "Simon" == Simon Dawson <spdawson@gmail.com> writes: >>> +config BR2_PACKAGE_GST_PLUGIN_X170 >>> + bool "gst-plugin-x170" >>> + depends on BR2_PACKAGE_GSTREAMER >> >> A "depends on BR2_arm" should be added here. We generally try to hide >> such architecture-specific packages when they really don't make sense. >> Of course, technically speaking, it should only appear if the SoC is an >> AT91 SoC that has this specific video unit, but we are not able to do >> that with the existing Buildroot options. But we still try to make such >> options depend on BR2_arm. Simon> I think it's ARM9 only, so we can probably be slightly more specific: Simon> depends on (BR2_arm920t || BR2_arm922t || BR2_arm926t) And the only device I've ever seen with this IP block integrated are at91sam9m10/11, both of which are arm926t. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 2013-02-04 22:26 ` [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 Alexandre Belloni 2013-02-04 22:51 ` Thomas Petazzoni @ 2013-04-28 19:00 ` Peter Korsgaard 2013-05-25 22:41 ` Alexandre Belloni 1 sibling, 1 reply; 9+ messages in thread From: Peter Korsgaard @ 2013-04-28 19:00 UTC (permalink / raw) To: buildroot >>>>> "Alexandre" == Alexandre Belloni <alexandre.belloni@piout.net> writes: Alexandre> Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Hi, Will you send a v2 fixing the comments Thomas had? For the on2-8170-libs package, do you know what toolchain the binaries have been built with? Do we need to limit the C library / arch variant to ensure it is only available on compatible configs? -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 2013-04-28 19:00 ` Peter Korsgaard @ 2013-05-25 22:41 ` Alexandre Belloni 0 siblings, 0 replies; 9+ messages in thread From: Alexandre Belloni @ 2013-05-25 22:41 UTC (permalink / raw) To: buildroot Hi, On Sun, Apr 28, 2013 at 09:00:05PM +0200, Peter Korsgaard wrote : > Will you send a v2 fixing the comments Thomas had? > I had a look again today, I addressed almost all the comments but I'm still try to figure what is happening with the configure script. It is actually find glib and the other one correctly but it is not using the correct environment variable in the Makefile. I'll try to send something next week. > For the on2-8170-libs package, do you know what toolchain the binaries > have been built with? Do we need to limit the C library / arch variant > to ensure it is only available on compatible configs? > The symbol that are coming from the libc are limited and if I recall correctly, it was working with a toolchain built by buildroot (that is using uClibc). Regards -- Alexandre Belloni ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board 2013-02-04 22:26 [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board Alexandre Belloni 2013-02-04 22:26 ` [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 Alexandre Belloni @ 2013-04-28 18:57 ` Peter Korsgaard 1 sibling, 0 replies; 9+ messages in thread From: Peter Korsgaard @ 2013-04-28 18:57 UTC (permalink / raw) To: buildroot >>>>> "Alexandre" == Alexandre Belloni <alexandre.belloni@piout.net> writes: Alexandre> Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net> Committed, thanks. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-05-25 22:41 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-02-04 22:26 [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board Alexandre Belloni 2013-02-04 22:26 ` [Buildroot] [PATCH 2/2] Add HW decoding support for Hantro x170 Alexandre Belloni 2013-02-04 22:51 ` Thomas Petazzoni 2013-02-05 20:41 ` Alexandre Belloni 2013-04-29 13:12 ` Simon Dawson 2013-04-29 13:20 ` Peter Korsgaard 2013-04-28 19:00 ` Peter Korsgaard 2013-05-25 22:41 ` Alexandre Belloni 2013-04-28 18:57 ` [Buildroot] [PATCH 1/2] Add defconfig for ATMEL at91sam9g45m10ek board Peter Korsgaard
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.