* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. [not found] <20130602042033.GB16050@localhost> @ 2013-06-03 11:17 ` Rafael J. Wysocki 2013-06-03 11:26 ` Fengguang Wu 0 siblings, 1 reply; 5+ messages in thread From: Rafael J. Wysocki @ 2013-06-03 11:17 UTC (permalink / raw) To: Fengguang Wu; +Cc: linux-acpi On 6/2/2013 6:20 AM, Fengguang Wu wrote: > Greetings, > > FYI, I got this occasionally in some of my machines when testing the > pm/bleeding-edge branch: > > [ 0.040000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.044000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC > [ 0.044000] ...trying to set up timer (IRQ0) through the 8259A ... > [ 0.044000] ..... (found apic 0 pin 2) ... > [ 0.048000] ....... failed. > [ 0.048000] ...trying to set up timer as Virtual Wire IRQ... > [ 0.048000] ..... failed. > [ 0.048000] ...trying to set up timer as ExtINT IRQ... > [ 0.052000] ..... failed :(. > [ 0.052000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the > +'noapic' option. > > Bisect result is unfortunately not reliable.. Can you please check if this is reproducible with the acpi-hotplug branch alone? Rafael --------------------------------------------------------------------- Intel Technology Poland sp. z o.o. z siedziba w Gdansku ul. Slowackiego 173 80-298 Gdansk Sad Rejonowy Gdansk Polnoc w Gdansku, VII Wydzial Gospodarczy Krajowego Rejestru Sadowego, numer KRS 101882 NIP 957-07-52-316 Kapital zakladowy 200.000 zl This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. 2013-06-03 11:17 ` Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option Rafael J. Wysocki @ 2013-06-03 11:26 ` Fengguang Wu 2013-06-04 0:43 ` Fengguang Wu 0 siblings, 1 reply; 5+ messages in thread From: Fengguang Wu @ 2013-06-03 11:26 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: linux-acpi On Mon, Jun 03, 2013 at 01:17:00PM +0200, Rafael J. Wysocki wrote: > On 6/2/2013 6:20 AM, Fengguang Wu wrote: > >Greetings, > > > >FYI, I got this occasionally in some of my machines when testing the > >pm/bleeding-edge branch: > > > >[ 0.040000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > >[ 0.044000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC > >[ 0.044000] ...trying to set up timer (IRQ0) through the 8259A ... > >[ 0.044000] ..... (found apic 0 pin 2) ... > >[ 0.048000] ....... failed. > >[ 0.048000] ...trying to set up timer as Virtual Wire IRQ... > >[ 0.048000] ..... failed. > >[ 0.048000] ...trying to set up timer as ExtINT IRQ... > >[ 0.052000] ..... failed :(. > >[ 0.052000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the > >+'noapic' option. > > > >Bisect result is unfortunately not reliable.. > > Can you please check if this is reproducible with the acpi-hotplug > branch alone? Nope, it also shows up in upstream kernel. Sorry.. I'll try more bisect. Thanks, Fengguang ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. 2013-06-03 11:26 ` Fengguang Wu @ 2013-06-04 0:43 ` Fengguang Wu 2013-06-04 0:52 ` Rafael J. Wysocki 2013-06-04 9:13 ` Martin Mokrejs 0 siblings, 2 replies; 5+ messages in thread From: Fengguang Wu @ 2013-06-04 0:43 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: linux-acpi On Mon, Jun 03, 2013 at 07:26:24PM +0800, Fengguang Wu wrote: > On Mon, Jun 03, 2013 at 01:17:00PM +0200, Rafael J. Wysocki wrote: > > On 6/2/2013 6:20 AM, Fengguang Wu wrote: > > >Greetings, > > > > > >FYI, I got this occasionally in some of my machines when testing the > > >pm/bleeding-edge branch: > > > > > >[ 0.040000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > > >[ 0.044000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC > > >[ 0.044000] ...trying to set up timer (IRQ0) through the 8259A ... > > >[ 0.044000] ..... (found apic 0 pin 2) ... > > >[ 0.048000] ....... failed. > > >[ 0.048000] ...trying to set up timer as Virtual Wire IRQ... > > >[ 0.048000] ..... failed. > > >[ 0.048000] ...trying to set up timer as ExtINT IRQ... > > >[ 0.052000] ..... failed :(. > > >[ 0.052000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the > > >+'noapic' option. > > > > > >Bisect result is unfortunately not reliable.. > > > > Can you please check if this is reproducible with the acpi-hotplug > > branch alone? > > Nope, it also shows up in upstream kernel. Sorry.. I'll try more bisect. FYI, linux-next boots fine, so it should have been fixed somewhere. Sorry for the noises! Thanks, Fengguang ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. 2013-06-04 0:43 ` Fengguang Wu @ 2013-06-04 0:52 ` Rafael J. Wysocki 2013-06-04 9:13 ` Martin Mokrejs 1 sibling, 0 replies; 5+ messages in thread From: Rafael J. Wysocki @ 2013-06-04 0:52 UTC (permalink / raw) To: Fengguang Wu; +Cc: linux-acpi On 6/4/2013 2:43 AM, Fengguang Wu wrote: > On Mon, Jun 03, 2013 at 07:26:24PM +0800, Fengguang Wu wrote: >> On Mon, Jun 03, 2013 at 01:17:00PM +0200, Rafael J. Wysocki wrote: >>> On 6/2/2013 6:20 AM, Fengguang Wu wrote: >>>> Greetings, >>>> >>>> FYI, I got this occasionally in some of my machines when testing the >>>> pm/bleeding-edge branch: >>>> >>>> [ 0.040000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >>>> [ 0.044000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC >>>> [ 0.044000] ...trying to set up timer (IRQ0) through the 8259A ... >>>> [ 0.044000] ..... (found apic 0 pin 2) ... >>>> [ 0.048000] ....... failed. >>>> [ 0.048000] ...trying to set up timer as Virtual Wire IRQ... >>>> [ 0.048000] ..... failed. >>>> [ 0.048000] ...trying to set up timer as ExtINT IRQ... >>>> [ 0.052000] ..... failed :(. >>>> [ 0.052000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the >>>> +'noapic' option. >>>> >>>> Bisect result is unfortunately not reliable.. >>> Can you please check if this is reproducible with the acpi-hotplug >>> branch alone? >> Nope, it also shows up in upstream kernel. Sorry.. I'll try more bisect. > FYI, linux-next boots fine, so it should have been fixed somewhere. > Sorry for the noises! No problem, I'm glad it's been fixed. Thanks, Rafael --------------------------------------------------------------------- Intel Technology Poland sp. z o.o. z siedziba w Gdansku ul. Slowackiego 173 80-298 Gdansk Sad Rejonowy Gdansk Polnoc w Gdansku, VII Wydzial Gospodarczy Krajowego Rejestru Sadowego, numer KRS 101882 NIP 957-07-52-316 Kapital zakladowy 200.000 zl This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. 2013-06-04 0:43 ` Fengguang Wu 2013-06-04 0:52 ` Rafael J. Wysocki @ 2013-06-04 9:13 ` Martin Mokrejs 1 sibling, 0 replies; 5+ messages in thread From: Martin Mokrejs @ 2013-06-04 9:13 UTC (permalink / raw) To: Fengguang Wu, Rafael J. Wysocki; +Cc: linux-acpi Fengguang Wu wrote: > On Mon, Jun 03, 2013 at 07:26:24PM +0800, Fengguang Wu wrote: >> On Mon, Jun 03, 2013 at 01:17:00PM +0200, Rafael J. Wysocki wrote: >>> On 6/2/2013 6:20 AM, Fengguang Wu wrote: >>>> Greetings, >>>> >>>> FYI, I got this occasionally in some of my machines when testing the >>>> pm/bleeding-edge branch: >>>> >>>> [ 0.040000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >>>> [ 0.044000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC >>>> [ 0.044000] ...trying to set up timer (IRQ0) through the 8259A ... >>>> [ 0.044000] ..... (found apic 0 pin 2) ... >>>> [ 0.048000] ....... failed. >>>> [ 0.048000] ...trying to set up timer as Virtual Wire IRQ... >>>> [ 0.048000] ..... failed. >>>> [ 0.048000] ...trying to set up timer as ExtINT IRQ... >>>> [ 0.052000] ..... failed :(. >>>> [ 0.052000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the >>>> +'noapic' option. >>>> >>>> Bisect result is unfortunately not reliable.. >>> >>> Can you please check if this is reproducible with the acpi-hotplug >>> branch alone? >> >> Nope, it also shows up in upstream kernel. Sorry.. I'll try more bisect. > > FYI, linux-next boots fine, so it should have been fixed somewhere. > Sorry for the noises! Can you please check it is not present in stable 3.9 and 3.10-rc4? We might still need to backport the deemed patch. Thank you, Martin ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-06-04 9:13 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20130602042033.GB16050@localhost>
2013-06-03 11:17 ` Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option Rafael J. Wysocki
2013-06-03 11:26 ` Fengguang Wu
2013-06-04 0:43 ` Fengguang Wu
2013-06-04 0:52 ` Rafael J. Wysocki
2013-06-04 9:13 ` Martin Mokrejs
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.