From: Daniel Vetter <daniel@ffwll.ch>
To: Paulo Zanoni <przanoni@gmail.com>
Cc: intel-gfx@lists.freedesktop.org, Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH 1/6] drm/i915: add ibx_irq_preinstall
Date: Thu, 6 Jun 2013 13:41:19 +0200 [thread overview]
Message-ID: <20130606114119.GA7827@phenom.ffwll.local> (raw)
In-Reply-To: <1370452916-3406-2-git-send-email-przanoni@gmail.com>
On Wed, Jun 05, 2013 at 02:21:51PM -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zanoni@intel.com>
>
> So we can remove some duplicate code. All the PCHs are very similar
> and right now the code is the same. I plan to add more code, so we
> would have more duplicated code.
>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Queued for -next, thanks for the patch. For the other prep patches I'd
like to review our interrupt code first a bit, like describe in my reply
to the vecs enabling patches.
-Daniel
> ---
> drivers/gpu/drm/i915/i915_irq.c | 44 ++++++++++++++++++++---------------------
> 1 file changed, 21 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 63996aa..c482e8a 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -2472,6 +2472,25 @@ void i915_hangcheck_elapsed(unsigned long data)
> DRM_I915_HANGCHECK_JIFFIES));
> }
>
> +static void ibx_irq_preinstall(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + if (HAS_PCH_NOP(dev))
> + return;
> +
> + /* south display irq */
> + I915_WRITE(SDEIMR, 0xffffffff);
> + /*
> + * SDEIER is also touched by the interrupt handler to work around missed
> + * PCH interrupts. Hence we can't update it after the interrupt handler
> + * is enabled - instead we unconditionally enable all PCH interrupt
> + * sources here, but then only unmask them as needed with SDEIMR.
> + */
> + I915_WRITE(SDEIER, 0xffffffff);
> + POSTING_READ(SDEIER);
> +}
> +
> /* drm_dma.h hooks
> */
> static void ironlake_irq_preinstall(struct drm_device *dev)
> @@ -2493,16 +2512,7 @@ static void ironlake_irq_preinstall(struct drm_device *dev)
> I915_WRITE(GTIER, 0x0);
> POSTING_READ(GTIER);
>
> - /* south display irq */
> - I915_WRITE(SDEIMR, 0xffffffff);
> - /*
> - * SDEIER is also touched by the interrupt handler to work around missed
> - * PCH interrupts. Hence we can't update it after the interrupt handler
> - * is enabled - instead we unconditionally enable all PCH interrupt
> - * sources here, but then only unmask them as needed with SDEIMR.
> - */
> - I915_WRITE(SDEIER, 0xffffffff);
> - POSTING_READ(SDEIER);
> + ibx_irq_preinstall(dev);
> }
>
> static void ivybridge_irq_preinstall(struct drm_device *dev)
> @@ -2529,19 +2539,7 @@ static void ivybridge_irq_preinstall(struct drm_device *dev)
> I915_WRITE(GEN6_PMIER, 0x0);
> POSTING_READ(GEN6_PMIER);
>
> - if (HAS_PCH_NOP(dev))
> - return;
> -
> - /* south display irq */
> - I915_WRITE(SDEIMR, 0xffffffff);
> - /*
> - * SDEIER is also touched by the interrupt handler to work around missed
> - * PCH interrupts. Hence we can't update it after the interrupt handler
> - * is enabled - instead we unconditionally enable all PCH interrupt
> - * sources here, but then only unmask them as needed with SDEIMR.
> - */
> - I915_WRITE(SDEIER, 0xffffffff);
> - POSTING_READ(SDEIER);
> + ibx_irq_preinstall(dev);
> }
>
> static void valleyview_irq_preinstall(struct drm_device *dev)
> --
> 1.8.1.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
next prev parent reply other threads:[~2013-06-06 11:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 17:21 [PATCH 0/6] Enable PC8+ states Paulo Zanoni
2013-06-05 17:21 ` [PATCH 1/6] drm/i915: add ibx_irq_preinstall Paulo Zanoni
2013-06-06 11:41 ` Daniel Vetter [this message]
2013-06-05 17:21 ` [PATCH 2/6] drm/i915: initialize Haswell audio interrupts Paulo Zanoni
2013-06-05 17:21 ` [PATCH 3/6] drm/i915: initialize FDI RX interrupts Paulo Zanoni
2013-06-05 17:21 ` [PATCH 4/6] drm/i915: initialize the Haswell SRD interrupts Paulo Zanoni
2013-06-05 17:21 ` [PATCH 5/6] drm/i915: initialize the PCH GTC interrupts Paulo Zanoni
2013-06-05 17:21 ` [PATCH 6/6] drm/i915: implement HSW display sequences for package C8+ Paulo Zanoni
2013-06-06 6:49 ` Chris Wilson
2013-06-06 7:40 ` Daniel Vetter
2013-06-12 16:27 ` [PATCH 0/6] Enable PC8+ states Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130606114119.GA7827@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=przanoni@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.