From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/4] arm: Add basic clocks for Rockchip rk3066a SoCs
Date: Thu, 13 Jun 2013 17:00:23 +0200 [thread overview]
Message-ID: <201306131700.23376.heiko@sntech.de> (raw)
In-Reply-To: <201306131658.36584.heiko@sntech.de>
This adds a basic clock setup for rk3066a SoCs. Only the gates are
set up currently, as the mux and dividers should use the upcoming
generic devicetree bindings.
Clocks whose rates need to be known are supplied by fixed-rate
"dummy"-clocks that provide the correct rate. This is uncritical insofar
that the only bootloader currently in existence for Rockchip devices
is the propietary Rockchip one that always setups the clocks in the
necessary way.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3066a-clocks.dtsi | 300 +++++++++++++++++++++++++++++++++
1 file changed, 300 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3066a-clocks.dtsi
diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi
new file mode 100644
index 0000000..bdbe18a
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-clocks.dtsi
@@ -0,0 +1,300 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+ clocks {
+ compatible = "rockchip,clocks";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * This is a dummy clock, to be used as placeholder on
+ * other mux clocks when a specific parent clock is not
+ * yet implemented. It should be dropped when the driver
+ * is complete.
+ */
+ dummy: dummy {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ dummy48m: dummy48m {
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+
+ dummy150m: dummy150m {
+ compatible = "fixed-clock";
+ clock-frequency = <150000000>;
+ #clock-cells = <0>;
+ };
+
+ clk_gates0: gate-clk at 200000d0 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d0 0x4>;
+ clocks = <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_core_periph", "gate_cpu_gpll",
+ "gate_ddrphy", "gate_aclk_cpu",
+ "gate_hclk_cpu", "gate_pclk_cpu",
+ "gate_atclk_cpu", "gate_i2s0",
+ "gate_i2s0_frac", "gate_i2s1",
+ "gate_i2s1_frac", "gate_i2s2",
+ "gate_i2s2_frac", "gate_spdif",
+ "gate_spdif_frac", "gate_testclk";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates1: gate-clk at 200000d4 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d4 0x4>;
+ clocks = <&xin24m>, <&xin24m>,
+ <&xin24m>, <&dummy>,
+ <&dummy>, <&xin24m>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>;
+
+ clock-output-names =
+ "gate_timer0", "gate_timer1",
+ "gate_timer2", "gate_jtag",
+ "gate_aclk_lcdc1_src", "gate_otgphy0",
+ "gate_otgphy1", "gate_ddr_gpll",
+ "gate_uart0", "gate_frac_uart0",
+ "gate_uart1", "gate_frac_uart1",
+ "gate_uart2", "gate_frac_uart2",
+ "gate_uart3", "gate_frac_uart3";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates2: gate-clk at 200000d8 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d8 0x4>;
+ clocks = <&clk_gates2 1>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&clk_gates2 3>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy48m>,
+ <&dummy>, <&dummy48m>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_periph_src", "gate_aclk_periph",
+ "gate_hclk_periph", "gate_pclk_periph",
+ "gate_smc", "gate_mac",
+ "gate_hsadc", "gate_hsadc_frac",
+ "gate_saradc", "gate_spi0",
+ "gate_spi1", "gate_mmc0",
+ "gate_mac_lbtest", "gate_mmc1",
+ "gate_emmc", "gate_tsadc";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates3: gate-clk at 200000dc {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000dc 0x4>;
+ clocks = <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+ "gate_dclk_lcdc1", "gate_pclkin_cif0",
+ "gate_pclkin_cif1", "reserved",
+ "reserved", "gate_cif0_out",
+ "gate_cif1_out", "gate_aclk_vepu",
+ "gate_hclk_vepu", "gate_aclk_vdpu",
+ "gate_hclk_vdpu", "gate_gpu_src",
+ "reserved", "gate_xin27m";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates4: gate-clk at 200000e0 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000e0 0x4>;
+ clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+ <&clk_gates2 1>, <&clk_gates2 1>,
+ <&clk_gates2 1>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates2 2>,
+ <&clk_gates0 4>, <&clk_gates0 4>,
+ <&clk_gates0 3>, <&clk_gates0 3>,
+ <&clk_gates0 3>, <&clk_gates2 3>,
+ <&clk_gates0 4>;
+
+ clock-output-names =
+ "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+ "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+ "gate_aclk_pei_niu", "gate_hclk_usb_peri",
+ "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+ "gate_hclk_cpubus", "gate_hclk_ahb2apb",
+ "gate_aclk_strc_sys", "gate_aclk_l2mem_con",
+ "gate_aclk_intmem", "gate_pclk_tsadc",
+ "gate_hclk_hdmi";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates5: gate-clk at 200000e4 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000e4 0x4>;
+ clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates0 4>, <&clk_gates0 5>,
+ <&clk_gates2 1>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates4 5>,
+ <&clk_gates4 5>, <&dummy>;
+
+ clock-output-names =
+ "gate_aclk_dmac1", "gate_aclk_dmac2",
+ "gate_pclk_efuse", "gate_pclk_tzpc",
+ "gate_pclk_grf", "gate_pclk_pmu",
+ "gate_hclk_rom", "gate_pclk_ddrupctl",
+ "gate_aclk_smc", "gate_hclk_nandc",
+ "gate_hclk_mmc0", "gate_hclk_mmc1",
+ "gate_hclk_emmc", "gate_hclk_otg0",
+ "gate_hclk_otg1", "gate_aclk_gpu";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates6: gate-clk at 200000e8 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000e8 0x4>;
+ clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates1 4>,
+ <&clk_gates0 4>, <&clk_gates3 0>,
+ <&clk_gates0 4>, <&clk_gates1 4>,
+ <&clk_gates3 0>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates1 4>,
+ <&clk_gates0 4>, <&clk_gates3 0>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_aclk_lcdc0", "gate_hclk_lcdc0",
+ "gate_hclk_lcdc1", "gate_aclk_lcdc1",
+ "gate_hclk_cif0", "gate_aclk_cif0",
+ "gate_hclk_cif1", "gate_aclk_cif1",
+ "gate_aclk_ipp", "gate_hclk_ipp",
+ "gate_hclk_rga", "gate_aclk_rga",
+ "gate_hclk_vio_bus", "gate_aclk_vio0",
+ "gate_aclk_vcodec", "gate_shclk_vio_h2h";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates7: gate-clk at 200000ec {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000ec 0x4>;
+ clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates2 3>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&clk_gates2 3>, <&clk_gates2 3>;
+
+ clock-output-names =
+ "gate_hclk_emac", "gate_hclk_spdif",
+ "gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
+ "gate_hclk_i2s_8ch", "gate_hclk_hsadc",
+ "gate_hclk_pidf", "gate_pclk_timer0",
+ "gate_pclk_timer1", "gate_pclk_timer2",
+ "gate_pclk_pwm01", "gate_pclk_pwm23",
+ "gate_pclk_spi0", "gate_pclk_spi1",
+ "gate_pclk_saradc", "gate_pclk_wdt";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates8: gate-clk at 200000f0 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000f0 0x4>;
+ clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&clk_gates2 3>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&dummy>, <&clk_gates0 5>;
+
+ clock-output-names =
+ "gate_pclk_uart0", "gate_pclk_uart1",
+ "gate_pclk_uart2", "gate_pclk_uart3",
+ "gate_pclk_i2c0", "gate_pclk_i2c1",
+ "gate_pclk_i2c2", "gate_pclk_i2c3",
+ "gate_pclk_i2c4", "gate_pclk_gpio0",
+ "gate_pclk_gpio1", "gate_pclk_gpio2",
+ "gate_pclk_gpio3", "gate_pclk_gpio4",
+ "reserved", "gate_pclk_gpio6";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates9: gate-clk at 200000f4 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000f4 0x4>;
+ clocks = <&dummy>, <&clk_gates0 5>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&clk_gates1 4>,
+ <&clk_gates0 5>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>;
+
+ clock-output-names =
+ "gate_clk_core_dbg", "gate_pclk_dbg",
+ "gate_clk_trace", "gate_atclk",
+ "gate_clk_l2c", "gate_aclk_vio1",
+ "gate_pclk_publ", "gate_aclk_intmem0",
+ "gate_aclk_intmem1", "gate_aclk_intmem2",
+ "gate_aclk_intmem3";
+
+ #clock-cells = <1>;
+ };
+ };
+
+};
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v4 2/4] arm: Add basic clocks for Rockchip rk3066a SoCs
Date: Thu, 13 Jun 2013 17:00:23 +0200 [thread overview]
Message-ID: <201306131700.23376.heiko@sntech.de> (raw)
In-Reply-To: <201306131658.36584.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
This adds a basic clock setup for rk3066a SoCs. Only the gates are
set up currently, as the mux and dividers should use the upcoming
generic devicetree bindings.
Clocks whose rates need to be known are supplied by fixed-rate
"dummy"-clocks that provide the correct rate. This is uncritical insofar
that the only bootloader currently in existence for Rockchip devices
is the propietary Rockchip one that always setups the clocks in the
necessary way.
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
arch/arm/boot/dts/rk3066a-clocks.dtsi | 300 +++++++++++++++++++++++++++++++++
1 file changed, 300 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3066a-clocks.dtsi
diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi
new file mode 100644
index 0000000..bdbe18a
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-clocks.dtsi
@@ -0,0 +1,300 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+ clocks {
+ compatible = "rockchip,clocks";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * This is a dummy clock, to be used as placeholder on
+ * other mux clocks when a specific parent clock is not
+ * yet implemented. It should be dropped when the driver
+ * is complete.
+ */
+ dummy: dummy {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ dummy48m: dummy48m {
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+
+ dummy150m: dummy150m {
+ compatible = "fixed-clock";
+ clock-frequency = <150000000>;
+ #clock-cells = <0>;
+ };
+
+ clk_gates0: gate-clk@200000d0 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d0 0x4>;
+ clocks = <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_core_periph", "gate_cpu_gpll",
+ "gate_ddrphy", "gate_aclk_cpu",
+ "gate_hclk_cpu", "gate_pclk_cpu",
+ "gate_atclk_cpu", "gate_i2s0",
+ "gate_i2s0_frac", "gate_i2s1",
+ "gate_i2s1_frac", "gate_i2s2",
+ "gate_i2s2_frac", "gate_spdif",
+ "gate_spdif_frac", "gate_testclk";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates1: gate-clk@200000d4 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d4 0x4>;
+ clocks = <&xin24m>, <&xin24m>,
+ <&xin24m>, <&dummy>,
+ <&dummy>, <&xin24m>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>;
+
+ clock-output-names =
+ "gate_timer0", "gate_timer1",
+ "gate_timer2", "gate_jtag",
+ "gate_aclk_lcdc1_src", "gate_otgphy0",
+ "gate_otgphy1", "gate_ddr_gpll",
+ "gate_uart0", "gate_frac_uart0",
+ "gate_uart1", "gate_frac_uart1",
+ "gate_uart2", "gate_frac_uart2",
+ "gate_uart3", "gate_frac_uart3";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates2: gate-clk@200000d8 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d8 0x4>;
+ clocks = <&clk_gates2 1>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&clk_gates2 3>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy48m>,
+ <&dummy>, <&dummy48m>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_periph_src", "gate_aclk_periph",
+ "gate_hclk_periph", "gate_pclk_periph",
+ "gate_smc", "gate_mac",
+ "gate_hsadc", "gate_hsadc_frac",
+ "gate_saradc", "gate_spi0",
+ "gate_spi1", "gate_mmc0",
+ "gate_mac_lbtest", "gate_mmc1",
+ "gate_emmc", "gate_tsadc";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates3: gate-clk@200000dc {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000dc 0x4>;
+ clocks = <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+ "gate_dclk_lcdc1", "gate_pclkin_cif0",
+ "gate_pclkin_cif1", "reserved",
+ "reserved", "gate_cif0_out",
+ "gate_cif1_out", "gate_aclk_vepu",
+ "gate_hclk_vepu", "gate_aclk_vdpu",
+ "gate_hclk_vdpu", "gate_gpu_src",
+ "reserved", "gate_xin27m";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates4: gate-clk@200000e0 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000e0 0x4>;
+ clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+ <&clk_gates2 1>, <&clk_gates2 1>,
+ <&clk_gates2 1>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates2 2>,
+ <&clk_gates0 4>, <&clk_gates0 4>,
+ <&clk_gates0 3>, <&clk_gates0 3>,
+ <&clk_gates0 3>, <&clk_gates2 3>,
+ <&clk_gates0 4>;
+
+ clock-output-names =
+ "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+ "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+ "gate_aclk_pei_niu", "gate_hclk_usb_peri",
+ "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+ "gate_hclk_cpubus", "gate_hclk_ahb2apb",
+ "gate_aclk_strc_sys", "gate_aclk_l2mem_con",
+ "gate_aclk_intmem", "gate_pclk_tsadc",
+ "gate_hclk_hdmi";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates5: gate-clk@200000e4 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000e4 0x4>;
+ clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates0 4>, <&clk_gates0 5>,
+ <&clk_gates2 1>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates4 5>,
+ <&clk_gates4 5>, <&dummy>;
+
+ clock-output-names =
+ "gate_aclk_dmac1", "gate_aclk_dmac2",
+ "gate_pclk_efuse", "gate_pclk_tzpc",
+ "gate_pclk_grf", "gate_pclk_pmu",
+ "gate_hclk_rom", "gate_pclk_ddrupctl",
+ "gate_aclk_smc", "gate_hclk_nandc",
+ "gate_hclk_mmc0", "gate_hclk_mmc1",
+ "gate_hclk_emmc", "gate_hclk_otg0",
+ "gate_hclk_otg1", "gate_aclk_gpu";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates6: gate-clk@200000e8 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000e8 0x4>;
+ clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates1 4>,
+ <&clk_gates0 4>, <&clk_gates3 0>,
+ <&clk_gates0 4>, <&clk_gates1 4>,
+ <&clk_gates3 0>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates1 4>,
+ <&clk_gates0 4>, <&clk_gates3 0>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_aclk_lcdc0", "gate_hclk_lcdc0",
+ "gate_hclk_lcdc1", "gate_aclk_lcdc1",
+ "gate_hclk_cif0", "gate_aclk_cif0",
+ "gate_hclk_cif1", "gate_aclk_cif1",
+ "gate_aclk_ipp", "gate_hclk_ipp",
+ "gate_hclk_rga", "gate_aclk_rga",
+ "gate_hclk_vio_bus", "gate_aclk_vio0",
+ "gate_aclk_vcodec", "gate_shclk_vio_h2h";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates7: gate-clk@200000ec {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000ec 0x4>;
+ clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates0 4>,
+ <&clk_gates0 4>, <&clk_gates2 2>,
+ <&clk_gates2 2>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates2 3>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&clk_gates2 3>, <&clk_gates2 3>;
+
+ clock-output-names =
+ "gate_hclk_emac", "gate_hclk_spdif",
+ "gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
+ "gate_hclk_i2s_8ch", "gate_hclk_hsadc",
+ "gate_hclk_pidf", "gate_pclk_timer0",
+ "gate_pclk_timer1", "gate_pclk_timer2",
+ "gate_pclk_pwm01", "gate_pclk_pwm23",
+ "gate_pclk_spi0", "gate_pclk_spi1",
+ "gate_pclk_saradc", "gate_pclk_wdt";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates8: gate-clk@200000f0 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000f0 0x4>;
+ clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&clk_gates2 3>, <&clk_gates0 5>,
+ <&clk_gates0 5>, <&clk_gates0 5>,
+ <&clk_gates2 3>, <&clk_gates2 3>,
+ <&dummy>, <&clk_gates0 5>;
+
+ clock-output-names =
+ "gate_pclk_uart0", "gate_pclk_uart1",
+ "gate_pclk_uart2", "gate_pclk_uart3",
+ "gate_pclk_i2c0", "gate_pclk_i2c1",
+ "gate_pclk_i2c2", "gate_pclk_i2c3",
+ "gate_pclk_i2c4", "gate_pclk_gpio0",
+ "gate_pclk_gpio1", "gate_pclk_gpio2",
+ "gate_pclk_gpio3", "gate_pclk_gpio4",
+ "reserved", "gate_pclk_gpio6";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates9: gate-clk@200000f4 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000f4 0x4>;
+ clocks = <&dummy>, <&clk_gates0 5>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&clk_gates1 4>,
+ <&clk_gates0 5>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>;
+
+ clock-output-names =
+ "gate_clk_core_dbg", "gate_pclk_dbg",
+ "gate_clk_trace", "gate_atclk",
+ "gate_clk_l2c", "gate_aclk_vio1",
+ "gate_pclk_publ", "gate_aclk_intmem0",
+ "gate_aclk_intmem1", "gate_aclk_intmem2",
+ "gate_aclk_intmem3";
+
+ #clock-cells = <1>;
+ };
+ };
+
+};
--
1.7.10.4
next prev parent reply other threads:[~2013-06-13 15:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-13 14:58 [PATCH v4 0/4] arm: add basic support for Rockchip Cortex-A9 SoCs Heiko Stübner
2013-06-13 14:58 ` Heiko Stübner
2013-06-13 14:59 ` [PATCH v4 1/4] clk: add support for Rockchip gate clocks Heiko Stübner
2013-06-13 14:59 ` Heiko Stübner
2013-06-20 23:29 ` Mike Turquette
2013-06-20 23:29 ` Mike Turquette
2013-06-13 15:00 ` Heiko Stübner [this message]
2013-06-13 15:00 ` [PATCH v4 2/4] arm: Add basic clocks for Rockchip rk3066a SoCs Heiko Stübner
2013-06-13 15:00 ` [PATCH v4 3/4] arm: add debug uarts for rockchip rk29xx and rk3xxx series Heiko Stübner
2013-06-13 15:00 ` Heiko Stübner
2013-06-13 15:02 ` [PATCH v4 4/4] arm: add basic support for Rockchip RK3066a boards Heiko Stübner
2013-06-13 15:02 ` Heiko Stübner
2013-06-17 21:35 ` Olof Johansson
2013-06-17 21:35 ` Olof Johansson
2013-06-17 22:26 ` Heiko Stübner
2013-06-17 22:26 ` Heiko Stübner
2013-06-18 14:13 ` Arnd Bergmann
2013-06-18 14:13 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201306131700.23376.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.