Re: [PATCH V2] i2c: designware: fix race between subsequent xfers

[Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 2117 bytes --]

On Fri, Jun 07, 2013 at 10:51:23AM +0200, Christian Ruppert wrote:
> The designware block is not always properly disabled in the case of
> transfer errors. Interrupts from aborted transfers might be handled
> after the data structures for the following transfer are initialised but
> before the hardware is set up. This can corrupt the data structures to
> the point that the system is stuck in an infinite interrupt loop (where
> FIFOs are never emptied because dev->msg_read_idx == dev->msgs_num).
> 
> This patch cleanly disables the designware-i2c hardware at the end of
> every transfer, be it successful or not.
> 
> This patch requires https://patchwork.kernel.org/patch/2601241/ to be
> applied first.

These last two lines should be below "---".

> 
> Signed-off-by: Christian Ruppert <christian.ruppert-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/i2c/busses/i2c-designware-core.c |   10 ++++++++--
>  1 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
> index b75d292..55a9991 100644
> --- a/drivers/i2c/busses/i2c-designware-core.c
> +++ b/drivers/i2c/busses/i2c-designware-core.c
> @@ -588,11 +588,19 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
>  	ret = wait_for_completion_timeout(&dev->cmd_complete, HZ);
>  	if (ret == 0) {
>  		dev_err(dev->dev, "controller timed out\n");
> +		/* i2c_dw_init implicitly disables the adapter */
>  		i2c_dw_init(dev);
>  		ret = -ETIMEDOUT;
>  		goto done;
>  	}
>  
> +	/*
> +	 * We must disable the adapter before unlocking the &dev->lock mutex
> +	 * below. Otherwise the hardware might continue generating interrupts
> +	 * which in turn causes a race condition with the following transfer.

I added "Needs some more investigation if the additional interrupts are
a hardware bug or this driver doesn't handle them correctly yet." to the
comment and

Applied to for-next, thanks!

BTW since I am currently here: i2c-designware-core should be in the
'algos' directory, no?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]