All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-fbdev@vger.kernel.org,
	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
	jimwall@q.com, brian@crystalfontz.com,
	linux-kernel@vger.kernel.org, Richard Purdie <rpurdie@rpsys.net>,
	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Subject: Re: [PATCH 2/2] fb: backlight: HX8357: Add HX8369 support
Date: Fri, 21 Jun 2013 18:49:21 +0000	[thread overview]
Message-ID: <20130621184921.GA26008@lukather> (raw)
In-Reply-To: <1371839259-543-2-git-send-email-alexandre.belloni@free-electrons.com>

[-- Attachment #1: Type: text/plain, Size: 8236 bytes --]

Hi Alex,

On Fri, Jun 21, 2013 at 08:27:39PM +0200, Alexandre Belloni wrote:
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  drivers/video/backlight/hx8357.c | 183 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 175 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
> index 69f5672..b1c4042 100644
> --- a/drivers/video/backlight/hx8357.c
> +++ b/drivers/video/backlight/hx8357.c
> @@ -71,6 +71,18 @@
>  #define HX8357_SET_POWER_NORMAL		0xd2
>  #define HX8357_SET_PANEL_RELATED	0xe9
>  
> +#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
> +#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
> +#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
> +#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
> +#define HX8369_SET_POWER			0xb1
> +#define HX8369_SET_DISPLAY_MODE			0xb2
> +#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
> +#define HX8369_SET_VCOM				0xb6
> +#define HX8369_SET_EXTENSION_COMMAND		0xb9
> +#define HX8369_SET_GIP				0xd5
> +#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
> +
>  struct hx8357_data {
>  	unsigned		im_pins[HX8357_NUM_IM_PINS];
>  	unsigned		reset;
> @@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
>  	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
>  };
>  
> +static u8 hx8369_seq_write_CABC_min_brightness[] = {
> +	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control[] = {
> +	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
> +};
> +
> +static u8 hx8369_seq_set_display_brightness[] = {
> +	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control_setting[] = {
> +	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
> +};
> +
> +static u8 hx8369_seq_extension_command[] = {
> +	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
> +};
> +
> +static u8 hx8369_seq_display_related[] = {
> +	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
> +	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
> +};
> +
> +static u8 hx8369_seq_panel_waveform_cycle[] = {
> +	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
> +};
> +
> +static u8 hx8369_seq_set_address_mode[] = {
> +	HX8357_SET_ADDRESS_MODE, 0x00,
> +};
> +
> +static u8 hx8369_seq_vcom[] = {
> +	HX8369_SET_VCOM, 0x3e, 0x3e,
> +};
> +
> +static u8 hx8369_seq_gip[] = {
> +	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
> +	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
> +	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
> +};
> +
> +static u8 hx8369_seq_power[] = {
> +	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
> +	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
> +};
> +
> +static u8 hx8369_seq_gamma_curve_related[] = {
> +	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
> +	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> +	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
> +	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> +};
> +
>  static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
>  				u8 *txbuf, u16 txlen,
>  				u8 *rxbuf, u16 rxlen)
> @@ -242,6 +309,16 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
>  	return 0;
>  }
>  
> +static void hx8357_lcd_reset(struct hx8357_data *lcd)
> +{
> +	gpio_set_value(lcd->reset, 1);
> +	usleep_range(10000, 12000);
> +	gpio_set_value(lcd->reset, 0);
> +	usleep_range(10000, 12000);
> +	gpio_set_value(lcd->reset, 1);
> +	msleep(120);
> +}

We should probably use the new reset framework here, especially
reset-gpio (I'm not sure what's the current status of the patch though).

> +
>  static int hx8357_lcd_init(struct lcd_device *lcdev)
>  {
>  	struct hx8357_data *lcd = lcd_get_data(lcdev);
> @@ -257,13 +334,7 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
>  		gpio_set_value_cansleep(lcd->im_pins[2], 1);
>  	}
>  
> -	/* Reset the screen */
> -	gpio_set_value(lcd->reset, 1);
> -	usleep_range(10000, 12000);
> -	gpio_set_value(lcd->reset, 0);
> -	usleep_range(10000, 12000);
> -	gpio_set_value(lcd->reset, 1);
> -	msleep(120);
> +	hx8357_lcd_reset(lcd);

And that would become reset_device_reset

>  	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
>  				ARRAY_SIZE(hx8357_seq_power));
> @@ -359,6 +430,97 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
>  	return 0;
>  }
>  
> +static int hx8369_lcd_init(struct lcd_device *lcdev)
> +{
> +	struct hx8357_data *lcd = lcd_get_data(lcdev);
> +	int ret;
> +
> +	hx8357_lcd_reset(lcd);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
> +				ARRAY_SIZE(hx8369_seq_extension_command));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
> +				ARRAY_SIZE(hx8369_seq_display_related));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
> +				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
> +				ARRAY_SIZE(hx8369_seq_set_address_mode));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
> +				ARRAY_SIZE(hx8369_seq_vcom));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
> +				ARRAY_SIZE(hx8369_seq_gip));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
> +				ARRAY_SIZE(hx8369_seq_power));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> +	if (ret < 0)
> +		return ret;
> +
> +	msleep(120);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
> +				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(1000, 1200);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
> +				ARRAY_SIZE(hx8369_seq_write_CABC_control));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev,
> +			hx8369_seq_write_CABC_control_setting,
> +			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev,
> +			hx8369_seq_write_CABC_min_brightness,
> +			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
> +				ARRAY_SIZE(hx8369_seq_set_display_brightness));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
> +	if (ret < 0)
> +		return ret;
> +	msleep(100);
> +
> +	return 0;
> +}
> +
>  #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
>  
>  static int hx8357_set_power(struct lcd_device *lcdev, int power)
> @@ -461,7 +623,11 @@ static int hx8357_probe(struct spi_device *spi)
>  	}
>  	spi_set_drvdata(spi, lcdev);
>  
> -	ret = hx8357_lcd_init(lcdev);
> +	ret = -ENODEV;
> +	if (of_device_is_compatible(spi->dev.of_node, "himax,hx8357"))
> +		ret = hx8357_lcd_init(lcdev);
> +	else if (of_device_is_compatible(spi->dev.of_node, "himax,hx8369"))
> +		ret = hx8369_lcd_init(lcdev);
>  	if (ret) {
>  		dev_err(&spi->dev, "Couldn't initialize panel\n");
>  		goto init_error;
> @@ -486,6 +652,7 @@ static int hx8357_remove(struct spi_device *spi)
>  
>  static const struct of_device_id hx8357_dt_ids[] = {
>  	{ .compatible = "himax,hx8357" },
> +	{ .compatible = "himax,hx8369" },

Maybe you could use the .data field and of_match_device here.

>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
> -- 
> 1.8.1.2
> 

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-fbdev@vger.kernel.org,
	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
	jimwall@q.com, brian@crystalfontz.com,
	linux-kernel@vger.kernel.org, Richard Purdie <rpurdie@rpsys.net>,
	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Subject: Re: [PATCH 2/2] fb: backlight: HX8357: Add HX8369 support
Date: Fri, 21 Jun 2013 20:49:21 +0200	[thread overview]
Message-ID: <20130621184921.GA26008@lukather> (raw)
In-Reply-To: <1371839259-543-2-git-send-email-alexandre.belloni@free-electrons.com>

[-- Attachment #1: Type: text/plain, Size: 8236 bytes --]

Hi Alex,

On Fri, Jun 21, 2013 at 08:27:39PM +0200, Alexandre Belloni wrote:
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  drivers/video/backlight/hx8357.c | 183 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 175 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
> index 69f5672..b1c4042 100644
> --- a/drivers/video/backlight/hx8357.c
> +++ b/drivers/video/backlight/hx8357.c
> @@ -71,6 +71,18 @@
>  #define HX8357_SET_POWER_NORMAL		0xd2
>  #define HX8357_SET_PANEL_RELATED	0xe9
>  
> +#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
> +#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
> +#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
> +#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
> +#define HX8369_SET_POWER			0xb1
> +#define HX8369_SET_DISPLAY_MODE			0xb2
> +#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
> +#define HX8369_SET_VCOM				0xb6
> +#define HX8369_SET_EXTENSION_COMMAND		0xb9
> +#define HX8369_SET_GIP				0xd5
> +#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
> +
>  struct hx8357_data {
>  	unsigned		im_pins[HX8357_NUM_IM_PINS];
>  	unsigned		reset;
> @@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
>  	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
>  };
>  
> +static u8 hx8369_seq_write_CABC_min_brightness[] = {
> +	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control[] = {
> +	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
> +};
> +
> +static u8 hx8369_seq_set_display_brightness[] = {
> +	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control_setting[] = {
> +	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
> +};
> +
> +static u8 hx8369_seq_extension_command[] = {
> +	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
> +};
> +
> +static u8 hx8369_seq_display_related[] = {
> +	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
> +	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
> +};
> +
> +static u8 hx8369_seq_panel_waveform_cycle[] = {
> +	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
> +};
> +
> +static u8 hx8369_seq_set_address_mode[] = {
> +	HX8357_SET_ADDRESS_MODE, 0x00,
> +};
> +
> +static u8 hx8369_seq_vcom[] = {
> +	HX8369_SET_VCOM, 0x3e, 0x3e,
> +};
> +
> +static u8 hx8369_seq_gip[] = {
> +	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
> +	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
> +	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
> +};
> +
> +static u8 hx8369_seq_power[] = {
> +	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
> +	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
> +};
> +
> +static u8 hx8369_seq_gamma_curve_related[] = {
> +	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
> +	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> +	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
> +	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> +};
> +
>  static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
>  				u8 *txbuf, u16 txlen,
>  				u8 *rxbuf, u16 rxlen)
> @@ -242,6 +309,16 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
>  	return 0;
>  }
>  
> +static void hx8357_lcd_reset(struct hx8357_data *lcd)
> +{
> +	gpio_set_value(lcd->reset, 1);
> +	usleep_range(10000, 12000);
> +	gpio_set_value(lcd->reset, 0);
> +	usleep_range(10000, 12000);
> +	gpio_set_value(lcd->reset, 1);
> +	msleep(120);
> +}

We should probably use the new reset framework here, especially
reset-gpio (I'm not sure what's the current status of the patch though).

> +
>  static int hx8357_lcd_init(struct lcd_device *lcdev)
>  {
>  	struct hx8357_data *lcd = lcd_get_data(lcdev);
> @@ -257,13 +334,7 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
>  		gpio_set_value_cansleep(lcd->im_pins[2], 1);
>  	}
>  
> -	/* Reset the screen */
> -	gpio_set_value(lcd->reset, 1);
> -	usleep_range(10000, 12000);
> -	gpio_set_value(lcd->reset, 0);
> -	usleep_range(10000, 12000);
> -	gpio_set_value(lcd->reset, 1);
> -	msleep(120);
> +	hx8357_lcd_reset(lcd);

And that would become reset_device_reset

>  	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
>  				ARRAY_SIZE(hx8357_seq_power));
> @@ -359,6 +430,97 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
>  	return 0;
>  }
>  
> +static int hx8369_lcd_init(struct lcd_device *lcdev)
> +{
> +	struct hx8357_data *lcd = lcd_get_data(lcdev);
> +	int ret;
> +
> +	hx8357_lcd_reset(lcd);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
> +				ARRAY_SIZE(hx8369_seq_extension_command));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
> +				ARRAY_SIZE(hx8369_seq_display_related));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
> +				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
> +				ARRAY_SIZE(hx8369_seq_set_address_mode));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
> +				ARRAY_SIZE(hx8369_seq_vcom));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
> +				ARRAY_SIZE(hx8369_seq_gip));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
> +				ARRAY_SIZE(hx8369_seq_power));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> +	if (ret < 0)
> +		return ret;
> +
> +	msleep(120);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
> +				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(1000, 1200);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
> +				ARRAY_SIZE(hx8369_seq_write_CABC_control));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev,
> +			hx8369_seq_write_CABC_control_setting,
> +			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev,
> +			hx8369_seq_write_CABC_min_brightness,
> +			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
> +				ARRAY_SIZE(hx8369_seq_set_display_brightness));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
> +	if (ret < 0)
> +		return ret;
> +	msleep(100);
> +
> +	return 0;
> +}
> +
>  #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
>  
>  static int hx8357_set_power(struct lcd_device *lcdev, int power)
> @@ -461,7 +623,11 @@ static int hx8357_probe(struct spi_device *spi)
>  	}
>  	spi_set_drvdata(spi, lcdev);
>  
> -	ret = hx8357_lcd_init(lcdev);
> +	ret = -ENODEV;
> +	if (of_device_is_compatible(spi->dev.of_node, "himax,hx8357"))
> +		ret = hx8357_lcd_init(lcdev);
> +	else if (of_device_is_compatible(spi->dev.of_node, "himax,hx8369"))
> +		ret = hx8369_lcd_init(lcdev);
>  	if (ret) {
>  		dev_err(&spi->dev, "Couldn't initialize panel\n");
>  		goto init_error;
> @@ -486,6 +652,7 @@ static int hx8357_remove(struct spi_device *spi)
>  
>  static const struct of_device_id hx8357_dt_ids[] = {
>  	{ .compatible = "himax,hx8357" },
> +	{ .compatible = "himax,hx8369" },

Maybe you could use the .data field and of_match_device here.

>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
> -- 
> 1.8.1.2
> 

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

  reply	other threads:[~2013-06-21 18:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-21 18:27 [PATCH 1/2] fb: backlight: HX8357: Make IM pins optionnal Alexandre Belloni
2013-06-21 18:27 ` Alexandre Belloni
2013-06-21 18:27 ` [PATCH 2/2] fb: backlight: HX8357: Add HX8369 support Alexandre Belloni
2013-06-21 18:27   ` Alexandre Belloni
2013-06-21 18:49   ` Maxime Ripard [this message]
2013-06-21 18:49     ` Maxime Ripard
2013-06-24 14:31   ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-24 14:31     ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-24 14:26 ` [PATCH 1/2] fb: backlight: HX8357: Make IM pins optionnal Jean-Christophe PLAGNIOL-VILLARD
2013-06-24 14:26   ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-25 13:50   ` Maxime Ripard
2013-06-25 13:50     ` Maxime Ripard
2013-07-12  9:11     ` Maxime Ripard
2013-07-12  9:11       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130621184921.GA26008@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=FlorianSchandinat@gmx.de \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=brian@crystalfontz.com \
    --cc=jimwall@q.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=plagnioj@jcrosoft.com \
    --cc=rpurdie@rpsys.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.