[RFC][PATCH] b43: replace B43_BCMA_EXTRA with modparam allhwsupport

[John W. Linville <linville@tuxdriver.com>]

Seems OK to me...

On Tue, Jun 25, 2013 at 05:34:55PM +0200, Rafa? Mi?ecki wrote:
> This allows enabling support for extra hardware with just a module
> param, without kernel/module recompilation.
> 
> Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
> ---
>  drivers/net/wireless/b43/Kconfig |    6 ------
>  drivers/net/wireless/b43/main.c  |   16 ++++++++++++++--
>  2 files changed, 14 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
> index 3f21e0b..51ff0b1 100644
> --- a/drivers/net/wireless/b43/Kconfig
> +++ b/drivers/net/wireless/b43/Kconfig
> @@ -31,12 +31,6 @@ config B43_BCMA
>  	depends on B43 && (BCMA = y || BCMA = B43)
>  	default y
>  
> -config B43_BCMA_EXTRA
> -	bool "Hardware support that overlaps with the brcmsmac driver"
> -	depends on B43_BCMA
> -	default n if BRCMSMAC
> -	default y
> -
>  config B43_SSB
>  	bool
>  	depends on B43 && (SSB = y || SSB = B43)
> diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
> index a95b77a..583993c 100644
> --- a/drivers/net/wireless/b43/main.c
> +++ b/drivers/net/wireless/b43/main.c
> @@ -113,13 +113,19 @@ static int b43_modparam_pio = 0;
>  module_param_named(pio, b43_modparam_pio, int, 0644);
>  MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
>  
> +#ifdef CONFIG_BRCMSMAC
> +static int modparam_allhwsupport;
> +#else
> +static int modparam_allhwsupport = 1;
> +#endif
> +module_param_named(allhwsupport, modparam_allhwsupport, int, 0444);
> +MODULE_PARM_DESC(allhwsupport, "Enable support for all hardware (even it if overlaps with the brcmsmac driver)");
> +
>  #ifdef CONFIG_B43_BCMA
>  static const struct bcma_device_id b43_bcma_tbl[] = {
>  	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
> -#ifdef CONFIG_B43_BCMA_EXTRA
>  	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
>  	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
> -#endif
>  	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
>  	BCMA_CORETABLE_END
>  };
> @@ -5396,6 +5402,12 @@ static int b43_bcma_probe(struct bcma_device *core)
>  	struct b43_wl *wl;
>  	int err;
>  
> +	if (!modparam_allhwsupport &&
> +	    (core->id.rev == 0x17 || core->id.rev == 0x18)) {
> +		pr_err("Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1\n");
> +		return -ENOTSUPP;
> +	}
> +
>  	dev = b43_bus_dev_bcma_init(core);
>  	if (!dev)
>  		return -ENODEV;
> -- 
> 1.7.10.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.