From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Joe Perches <joe@perches.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>,
xen-devel@lists.xensource.com,
Ian Campbell <ian.campbell@citrix.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"virtualization@lists.osdl.org"
<virtualization@lists.linux-foundation.org>
Subject: Re: [PATCH next] xen: Use more current logging styles
Date: Fri, 28 Jun 2013 09:11:42 -0400 [thread overview]
Message-ID: <20130628131142.GB3532@phenom.dumpdata.com> (raw)
In-Reply-To: <1372395469.2060.36.camel@joe-AO722>
On Thu, Jun 27, 2013 at 09:57:49PM -0700, Joe Perches wrote:
> Instead of mixing printk and pr_<level> forms,
> just use pr_<level>
>
> Miscellaneous changes around these conversions:
>
> Add a missing newline to avoid message interleaving,
> coalesce formats, reflow modified lines to 80 columns.
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/net/xen-netback/netback.c | 7 +++----
> drivers/net/xen-netfront.c | 28 +++++++++++++---------------
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 2 files changed, 16 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
> index 130bcb2..64828de 100644
> --- a/drivers/net/xen-netback/netback.c
> +++ b/drivers/net/xen-netback/netback.c
> @@ -1890,9 +1890,8 @@ static int __init netback_init(void)
> return -ENODEV;
>
> if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) {
> - printk(KERN_INFO
> - "xen-netback: fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",
> - fatal_skb_slots, XEN_NETBK_LEGACY_SLOTS_MAX);
> + pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",
> + fatal_skb_slots, XEN_NETBK_LEGACY_SLOTS_MAX);
> fatal_skb_slots = XEN_NETBK_LEGACY_SLOTS_MAX;
> }
>
> @@ -1921,7 +1920,7 @@ static int __init netback_init(void)
> "netback/%u", group);
>
> if (IS_ERR(netbk->task)) {
> - printk(KERN_ALERT "kthread_create() fails at netback\n");
> + pr_alert("kthread_create() fails at netback\n");
> del_timer(&netbk->net_timer);
> rc = PTR_ERR(netbk->task);
> goto failed_init;
> diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
> index 76a2236..ff7f111 100644
> --- a/drivers/net/xen-netfront.c
> +++ b/drivers/net/xen-netfront.c
> @@ -29,6 +29,8 @@
> * IN THE SOFTWARE.
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/netdevice.h>
> @@ -385,9 +387,8 @@ static void xennet_tx_buf_gc(struct net_device *dev)
> skb = np->tx_skbs[id].skb;
> if (unlikely(gnttab_query_foreign_access(
> np->grant_tx_ref[id]) != 0)) {
> - printk(KERN_ALERT "xennet_tx_buf_gc: warning "
> - "-- grant still in use by backend "
> - "domain.\n");
> + pr_alert("%s: warning -- grant still in use by backend domain\n",
> + __func__);
> BUG();
> }
> gnttab_end_foreign_access_ref(
> @@ -804,14 +805,14 @@ static int xennet_set_skb_gso(struct sk_buff *skb,
> {
> if (!gso->u.gso.size) {
> if (net_ratelimit())
> - printk(KERN_WARNING "GSO size must not be zero.\n");
> + pr_warn("GSO size must not be zero\n");
> return -EINVAL;
> }
>
> /* Currently only TCPv4 S.O. is supported. */
> if (gso->u.gso.type != XEN_NETIF_GSO_TYPE_TCPV4) {
> if (net_ratelimit())
> - printk(KERN_WARNING "Bad GSO type %d.\n", gso->u.gso.type);
> + pr_warn("Bad GSO type %d\n", gso->u.gso.type);
> return -EINVAL;
> }
>
> @@ -910,9 +911,8 @@ static int checksum_setup(struct net_device *dev, struct sk_buff *skb)
> break;
> default:
> if (net_ratelimit())
> - printk(KERN_ERR "Attempting to checksum a non-"
> - "TCP/UDP packet, dropping a protocol"
> - " %d packet", iph->protocol);
> + pr_err("Attempting to checksum a non-TCP/UDP packet, dropping a protocol %d packet\n",
> + iph->protocol);
> goto out;
> }
>
> @@ -1359,14 +1359,14 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
> /* A grant for every tx ring slot */
> if (gnttab_alloc_grant_references(TX_MAX_TARGET,
> &np->gref_tx_head) < 0) {
> - printk(KERN_ALERT "#### netfront can't alloc tx grant refs\n");
> + pr_alert("can't alloc tx grant refs\n");
> err = -ENOMEM;
> goto exit_free_stats;
> }
> /* A grant for every rx ring slot */
> if (gnttab_alloc_grant_references(RX_MAX_TARGET,
> &np->gref_rx_head) < 0) {
> - printk(KERN_ALERT "#### netfront can't alloc rx grant refs\n");
> + pr_alert("can't alloc rx grant refs\n");
> err = -ENOMEM;
> goto exit_free_tx;
> }
> @@ -1430,16 +1430,14 @@ static int netfront_probe(struct xenbus_device *dev,
>
> err = register_netdev(info->netdev);
> if (err) {
> - printk(KERN_WARNING "%s: register_netdev err=%d\n",
> - __func__, err);
> + pr_warn("%s: register_netdev err=%d\n", __func__, err);
> goto fail;
> }
>
> err = xennet_sysfs_addif(info->netdev);
> if (err) {
> unregister_netdev(info->netdev);
> - printk(KERN_WARNING "%s: add sysfs failed err=%d\n",
> - __func__, err);
> + pr_warn("%s: add sysfs failed err=%d\n", __func__, err);
> goto fail;
> }
>
> @@ -2116,7 +2114,7 @@ static int __init netif_init(void)
> if (xen_hvm_domain() && !xen_platform_pci_unplug)
> return -ENODEV;
>
> - printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
> + pr_info("Initialising Xen virtual ethernet driver\n");
>
> return xenbus_register_frontend(&netfront_driver);
> }
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Joe Perches <joe@perches.com>
Cc: Ian Campbell <ian.campbell@citrix.com>,
Jeremy Fitzhardinge <jeremy@goop.org>,
xen-devel@lists.xensource.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
"virtualization@lists.osdl.org"
<virtualization@lists.linux-foundation.org>
Subject: Re: [PATCH next] xen: Use more current logging styles
Date: Fri, 28 Jun 2013 09:11:42 -0400 [thread overview]
Message-ID: <20130628131142.GB3532@phenom.dumpdata.com> (raw)
In-Reply-To: <1372395469.2060.36.camel@joe-AO722>
On Thu, Jun 27, 2013 at 09:57:49PM -0700, Joe Perches wrote:
> Instead of mixing printk and pr_<level> forms,
> just use pr_<level>
>
> Miscellaneous changes around these conversions:
>
> Add a missing newline to avoid message interleaving,
> coalesce formats, reflow modified lines to 80 columns.
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/net/xen-netback/netback.c | 7 +++----
> drivers/net/xen-netfront.c | 28 +++++++++++++---------------
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 2 files changed, 16 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
> index 130bcb2..64828de 100644
> --- a/drivers/net/xen-netback/netback.c
> +++ b/drivers/net/xen-netback/netback.c
> @@ -1890,9 +1890,8 @@ static int __init netback_init(void)
> return -ENODEV;
>
> if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) {
> - printk(KERN_INFO
> - "xen-netback: fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",
> - fatal_skb_slots, XEN_NETBK_LEGACY_SLOTS_MAX);
> + pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",
> + fatal_skb_slots, XEN_NETBK_LEGACY_SLOTS_MAX);
> fatal_skb_slots = XEN_NETBK_LEGACY_SLOTS_MAX;
> }
>
> @@ -1921,7 +1920,7 @@ static int __init netback_init(void)
> "netback/%u", group);
>
> if (IS_ERR(netbk->task)) {
> - printk(KERN_ALERT "kthread_create() fails at netback\n");
> + pr_alert("kthread_create() fails at netback\n");
> del_timer(&netbk->net_timer);
> rc = PTR_ERR(netbk->task);
> goto failed_init;
> diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
> index 76a2236..ff7f111 100644
> --- a/drivers/net/xen-netfront.c
> +++ b/drivers/net/xen-netfront.c
> @@ -29,6 +29,8 @@
> * IN THE SOFTWARE.
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/netdevice.h>
> @@ -385,9 +387,8 @@ static void xennet_tx_buf_gc(struct net_device *dev)
> skb = np->tx_skbs[id].skb;
> if (unlikely(gnttab_query_foreign_access(
> np->grant_tx_ref[id]) != 0)) {
> - printk(KERN_ALERT "xennet_tx_buf_gc: warning "
> - "-- grant still in use by backend "
> - "domain.\n");
> + pr_alert("%s: warning -- grant still in use by backend domain\n",
> + __func__);
> BUG();
> }
> gnttab_end_foreign_access_ref(
> @@ -804,14 +805,14 @@ static int xennet_set_skb_gso(struct sk_buff *skb,
> {
> if (!gso->u.gso.size) {
> if (net_ratelimit())
> - printk(KERN_WARNING "GSO size must not be zero.\n");
> + pr_warn("GSO size must not be zero\n");
> return -EINVAL;
> }
>
> /* Currently only TCPv4 S.O. is supported. */
> if (gso->u.gso.type != XEN_NETIF_GSO_TYPE_TCPV4) {
> if (net_ratelimit())
> - printk(KERN_WARNING "Bad GSO type %d.\n", gso->u.gso.type);
> + pr_warn("Bad GSO type %d\n", gso->u.gso.type);
> return -EINVAL;
> }
>
> @@ -910,9 +911,8 @@ static int checksum_setup(struct net_device *dev, struct sk_buff *skb)
> break;
> default:
> if (net_ratelimit())
> - printk(KERN_ERR "Attempting to checksum a non-"
> - "TCP/UDP packet, dropping a protocol"
> - " %d packet", iph->protocol);
> + pr_err("Attempting to checksum a non-TCP/UDP packet, dropping a protocol %d packet\n",
> + iph->protocol);
> goto out;
> }
>
> @@ -1359,14 +1359,14 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
> /* A grant for every tx ring slot */
> if (gnttab_alloc_grant_references(TX_MAX_TARGET,
> &np->gref_tx_head) < 0) {
> - printk(KERN_ALERT "#### netfront can't alloc tx grant refs\n");
> + pr_alert("can't alloc tx grant refs\n");
> err = -ENOMEM;
> goto exit_free_stats;
> }
> /* A grant for every rx ring slot */
> if (gnttab_alloc_grant_references(RX_MAX_TARGET,
> &np->gref_rx_head) < 0) {
> - printk(KERN_ALERT "#### netfront can't alloc rx grant refs\n");
> + pr_alert("can't alloc rx grant refs\n");
> err = -ENOMEM;
> goto exit_free_tx;
> }
> @@ -1430,16 +1430,14 @@ static int netfront_probe(struct xenbus_device *dev,
>
> err = register_netdev(info->netdev);
> if (err) {
> - printk(KERN_WARNING "%s: register_netdev err=%d\n",
> - __func__, err);
> + pr_warn("%s: register_netdev err=%d\n", __func__, err);
> goto fail;
> }
>
> err = xennet_sysfs_addif(info->netdev);
> if (err) {
> unregister_netdev(info->netdev);
> - printk(KERN_WARNING "%s: add sysfs failed err=%d\n",
> - __func__, err);
> + pr_warn("%s: add sysfs failed err=%d\n", __func__, err);
> goto fail;
> }
>
> @@ -2116,7 +2114,7 @@ static int __init netif_init(void)
> if (xen_hvm_domain() && !xen_platform_pci_unplug)
> return -ENODEV;
>
> - printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
> + pr_info("Initialising Xen virtual ethernet driver\n");
>
> return xenbus_register_frontend(&netfront_driver);
> }
>
>
next prev parent reply other threads:[~2013-06-28 13:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-28 4:57 [PATCH next] xen: Use more current logging styles Joe Perches
2013-06-28 4:57 ` Joe Perches
2013-06-28 7:59 ` Ian Campbell
2013-06-28 7:59 ` Ian Campbell
2013-07-01 20:31 ` David Miller
2013-07-01 20:31 ` David Miller
2013-06-28 8:02 ` Wei Liu
2013-06-28 8:02 ` Wei Liu
2013-06-28 10:21 ` [PATCH next] xen: Convert printks to pr_<level> Joe Perches
2013-06-28 10:21 ` Joe Perches
2013-06-28 10:36 ` Wei Liu
2013-06-28 10:36 ` Wei Liu
2013-06-28 11:31 ` Joe Perches
2013-06-28 11:31 ` Joe Perches
2013-06-28 11:12 ` Ian Campbell
2013-06-28 11:12 ` Ian Campbell
2013-06-28 13:11 ` Konrad Rzeszutek Wilk [this message]
2013-06-28 13:11 ` [PATCH next] xen: Use more current logging styles Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130628131142.GB3532@phenom.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=ian.campbell@citrix.com \
--cc=jeremy@goop.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.