From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/6] ARM: rockchip: add smp functionality
Date: Fri, 5 Jul 2013 14:40:18 +0200 [thread overview]
Message-ID: <201307051440.19428.heiko@sntech.de> (raw)
This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.
To achieve this, add the scu, the needed sram and power-management-unit.
Tested on a rk3066a (dual core) by me and on a rk3188 (quad core)
by Ulrich Prinz.
(Note: rk3188 support in general needs additional upcoming patchsets)
changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel
changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
sram nodes
- the sram content is kept intact while the device is running, so
copying the trampoline is only needed once
Heiko Stuebner (6):
misc: sram: fix error path in sram_probe
misc: sram: add ability to mark sram sections as reserved
ARM: rockchip: add snoop-control-unit
ARM: rockchip: add sram dt nodes and documentation
ARM: rockchip: add power-management-unit dt node
ARM: rockchip: add smp bringup code
.../devicetree/bindings/arm/rockchip/pmu.txt | 16 ++
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 23 +++
Documentation/devicetree/bindings/misc/sram.txt | 8 +
arch/arm/boot/dts/rk3066a.dtsi | 16 ++
arch/arm/mach-rockchip/Kconfig | 1 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++
arch/arm/mach-rockchip/headsmp.S | 32 +++
arch/arm/mach-rockchip/platsmp.c | 203 ++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
drivers/misc/sram.c | 79 +++++++-
11 files changed, 398 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Ulrich Prinz
<ulrich.prinz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH v3 0/6] ARM: rockchip: add smp functionality
Date: Fri, 5 Jul 2013 14:40:18 +0200 [thread overview]
Message-ID: <201307051440.19428.heiko@sntech.de> (raw)
This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.
To achieve this, add the scu, the needed sram and power-management-unit.
Tested on a rk3066a (dual core) by me and on a rk3188 (quad core)
by Ulrich Prinz.
(Note: rk3188 support in general needs additional upcoming patchsets)
changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel
changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
sram nodes
- the sram content is kept intact while the device is running, so
copying the trampoline is only needed once
Heiko Stuebner (6):
misc: sram: fix error path in sram_probe
misc: sram: add ability to mark sram sections as reserved
ARM: rockchip: add snoop-control-unit
ARM: rockchip: add sram dt nodes and documentation
ARM: rockchip: add power-management-unit dt node
ARM: rockchip: add smp bringup code
.../devicetree/bindings/arm/rockchip/pmu.txt | 16 ++
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 23 +++
Documentation/devicetree/bindings/misc/sram.txt | 8 +
arch/arm/boot/dts/rk3066a.dtsi | 16 ++
arch/arm/mach-rockchip/Kconfig | 1 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++
arch/arm/mach-rockchip/headsmp.S | 32 +++
arch/arm/mach-rockchip/platsmp.c | 203 ++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
drivers/misc/sram.c | 79 +++++++-
11 files changed, 398 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <robherring2@gmail.com>,
devicetree-discuss@lists.ozlabs.org,
Russell King <linux@arm.linux.org.uk>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-kernel@vger.kernel.org,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
Ulrich Prinz <ulrich.prinz@googlemail.com>
Subject: [PATCH v3 0/6] ARM: rockchip: add smp functionality
Date: Fri, 5 Jul 2013 14:40:18 +0200 [thread overview]
Message-ID: <201307051440.19428.heiko@sntech.de> (raw)
This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.
To achieve this, add the scu, the needed sram and power-management-unit.
Tested on a rk3066a (dual core) by me and on a rk3188 (quad core)
by Ulrich Prinz.
(Note: rk3188 support in general needs additional upcoming patchsets)
changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel
changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
sram nodes
- the sram content is kept intact while the device is running, so
copying the trampoline is only needed once
Heiko Stuebner (6):
misc: sram: fix error path in sram_probe
misc: sram: add ability to mark sram sections as reserved
ARM: rockchip: add snoop-control-unit
ARM: rockchip: add sram dt nodes and documentation
ARM: rockchip: add power-management-unit dt node
ARM: rockchip: add smp bringup code
.../devicetree/bindings/arm/rockchip/pmu.txt | 16 ++
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 23 +++
Documentation/devicetree/bindings/misc/sram.txt | 8 +
arch/arm/boot/dts/rk3066a.dtsi | 16 ++
arch/arm/mach-rockchip/Kconfig | 1 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++
arch/arm/mach-rockchip/headsmp.S | 32 +++
arch/arm/mach-rockchip/platsmp.c | 203 ++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
drivers/misc/sram.c | 79 +++++++-
11 files changed, 398 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
--
1.7.10.4
next reply other threads:[~2013-07-05 12:40 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-05 12:40 Heiko Stübner [this message]
2013-07-05 12:40 ` [PATCH v3 0/6] ARM: rockchip: add smp functionality Heiko Stübner
2013-07-05 12:40 ` Heiko Stübner
2013-07-05 12:40 ` [PATCH v3 1/6] misc: sram: fix error path in sram_probe Heiko Stübner
2013-07-05 12:40 ` Heiko Stübner
2013-07-05 12:40 ` Heiko Stübner
2013-07-05 14:23 ` Philipp Zabel
2013-07-05 14:23 ` Philipp Zabel
2013-07-05 14:23 ` Philipp Zabel
2013-07-05 12:41 ` [PATCH v3 2/6] misc: sram: add ability to mark sram sections as reserved Heiko Stübner
2013-07-05 12:41 ` Heiko Stübner
2013-07-05 12:41 ` Heiko Stübner
2013-07-05 12:55 ` Fabio Estevam
2013-07-05 12:55 ` Fabio Estevam
2013-07-05 12:55 ` Fabio Estevam
2013-07-05 14:23 ` Heiko Stübner
2013-07-05 14:23 ` Heiko Stübner
2013-07-05 14:23 ` Heiko Stübner
2013-07-05 14:24 ` Philipp Zabel
2013-07-05 14:24 ` Philipp Zabel
2013-07-05 14:24 ` Philipp Zabel
2013-07-07 19:46 ` Rob Herring
2013-07-07 19:46 ` Rob Herring
2013-07-07 19:46 ` Rob Herring
2013-07-05 12:41 ` [PATCH v3 3/6] ARM: rockchip: add snoop-control-unit Heiko Stübner
2013-07-05 12:41 ` Heiko Stübner
2013-07-05 12:41 ` Heiko Stübner
2013-07-05 12:42 ` [PATCH v3 4/6] ARM: rockchip: add sram dt nodes and documentation Heiko Stübner
2013-07-05 12:42 ` Heiko Stübner
2013-07-05 12:42 ` [PATCH v3 5/6] ARM: rockchip: add power-management-unit dt node Heiko Stübner
2013-07-05 12:42 ` Heiko Stübner
2013-07-05 12:42 ` Heiko Stübner
2013-07-05 12:43 ` [PATCH v3 6/6] ARM: rockchip: add smp bringup code Heiko Stübner
2013-07-05 12:43 ` Heiko Stübner
2013-07-05 12:43 ` Heiko Stübner
2013-07-05 14:55 ` Fabio Estevam
2013-07-05 14:55 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201307051440.19428.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.