From: Guenter Roeck <linux@roeck-us.net>
To: Wei Ni <wni@nvidia.com>
Cc: khali@linux-fr.org, swarren@wwwdotorg.org,
thierry.reding@gmail.com, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH v2 3/3] hwmon: (lm90) use enums for the indexes of temp8 and temp11
Date: Wed, 10 Jul 2013 11:25:08 -0700 [thread overview]
Message-ID: <20130710182508.GD22430@roeck-us.net> (raw)
In-Reply-To: <1373455539-2831-4-git-send-email-wni@nvidia.com>
On Wed, Jul 10, 2013 at 07:25:39PM +0800, Wei Ni wrote:
> Using enums for the indexes and nrs of temp8 and temp11.
> This make the code much more readable.
>
> Signed-off-by: Wei Ni <wni@nvidia.com>
I don't really have a strong opinion on this one. Nice, but is it really worth it ?
Jean, any comments ?
Guenter
> ---
> drivers/hwmon/lm90.c | 179 ++++++++++++++++++++++++++++++++------------------
> 1 file changed, 114 insertions(+), 65 deletions(-)
>
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> index 88ff362..14e0b5b 100644
> --- a/drivers/hwmon/lm90.c
> +++ b/drivers/hwmon/lm90.c
> @@ -310,6 +310,59 @@ static const struct lm90_params lm90_params[] = {
> };
>
> /*
> + * TEMP8 register index
> + */
> +enum lm90_temp8_reg_index {
> + TEMP8_LOCAL_LOW = 0, /* 0: local low limit */
> + TEMP8_LOCAL_HIGH, /* 1: local high limit */
> + TEMP8_LOCAL_CRIT, /* 2: local critical limit */
> + TEMP8_REMOTE_CRIT, /* 3: remote critical limit */
> + TEMP8_LOCAL_EMERG, /* 4: local emergency limit
> + * (max6659 and max6695/96)
> + */
> + TEMP8_REMOTE_EMERG, /* 5: remote emergency limit
> + * (max6659 and max6695/96)
> + */
> + TEMP8_REMOTE2_CRIT, /* 6: remote 2 critical limit
> + * (max6695/96 only)
> + */
> + TEMP8_REMOTE2_EMERG, /* 7: remote 2 emergency limit
> + * (max6695/96 only)
> + */
> + TEMP8_REG_NUM
> +};
> +
> +/*
> + * TEMP11 register index
> + */
> +enum lm90_temp11_reg_index {
> + TEMP11_REMOTE_TEMP = 0, /* 0: remote input */
> + TEMP11_REMOTE_LOW, /* 1: remote low limit */
> + TEMP11_REMOTE_HIGH, /* 2: remote high limit */
> + TEMP11_REMOTE_OFFSET, /* 3: remote offset
> + * (except max6646, max6657/58/59,
> + * and max6695/96)
> + */
> + TEMP11_LOCAL_TEMP, /* 4: local input */
> + TEMP11_REMOTE2_TEMP, /* 5: remote 2 input (max6695/96 only) */
> + TEMP11_REMOTE2_LOW, /* 6: remote 2 low limit (max6695/96 only) */
> + TEMP11_REMOTE2_HIGH, /* 7: remote 2 high limit (max6695/96 only) */
> + TEMP11_REG_NUM
> +};
> +
> +/*
> + * TEMP11 register NR
> + */
> +enum lm90_temp11_reg_nr {
> + NR_CHAN_0_REMOTE_LOW = 0, /* 0: channel 0, remote low limit */
> + NR_CHAN_0_REMOTE_HIGH, /* 1: channel 0, remote high limit */
> + NR_CHAN_0_REMOTE_OFFSET, /* 2: channel 0, remote offset */
> + NR_CHAN_1_REMOTE_LOW, /* 3: channel 1, remote low limit */
> + NR_CHAN_1_REMOTE_HIGH, /* 4: channel 1, remote high limit */
> + NR_NUM /* number of the NRs for temp11 */
> +};
> +
> +/*
> * Client data (each client gets its own)
> */
>
> @@ -331,25 +384,8 @@ struct lm90_data {
> u8 reg_local_ext; /* local extension register offset */
>
> /* registers values */
> - s8 temp8[8]; /* 0: local low limit
> - * 1: local high limit
> - * 2: local critical limit
> - * 3: remote critical limit
> - * 4: local emergency limit (max6659 and max6695/96)
> - * 5: remote emergency limit (max6659 and max6695/96)
> - * 6: remote 2 critical limit (max6695/96 only)
> - * 7: remote 2 emergency limit (max6695/96 only)
> - */
> - s16 temp11[8]; /* 0: remote input
> - * 1: remote low limit
> - * 2: remote high limit
> - * 3: remote offset (except max6646, max6657/58/59,
> - * and max6695/96)
> - * 4: local input
> - * 5: remote 2 input (max6695/96 only)
> - * 6: remote 2 low limit (max6695/96 only)
> - * 7: remote 2 high limit (max6695/96 only)
> - */
> + s8 temp8[TEMP8_REG_NUM];
> + s16 temp11[TEMP11_REG_NUM];
> u8 temp_hyst;
> u16 alarms; /* bitvector (upper 8 bits for max6695/96) */
> };
> @@ -491,37 +527,42 @@ static struct lm90_data *lm90_update_device(struct device *dev)
> u8 alarms;
>
> dev_dbg(&client->dev, "Updating lm90 data.\n");
> - lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]);
> - lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]);
> - lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]);
> - lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]);
> + lm90_read_reg(client, LM90_REG_R_LOCAL_LOW,
> + &data->temp8[TEMP8_LOCAL_LOW]);
> + lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH,
> + &data->temp8[TEMP8_LOCAL_HIGH]);
> + lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT,
> + &data->temp8[TEMP8_LOCAL_CRIT]);
> + lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
> + &data->temp8[TEMP8_REMOTE_CRIT]);
> lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
>
> if (data->reg_local_ext) {
> lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
> data->reg_local_ext,
> - &data->temp11[4]);
> + &data->temp11[TEMP11_LOCAL_TEMP]);
> } else {
> if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
> &h) == 0)
> - data->temp11[4] = h << 8;
> + data->temp11[TEMP11_LOCAL_TEMP] = h << 8;
> }
> lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
> - LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]);
> + LM90_REG_R_REMOTE_TEMPL,
> + &data->temp11[TEMP11_REMOTE_TEMP]);
>
> if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) {
> - data->temp11[1] = h << 8;
> + data->temp11[TEMP11_REMOTE_LOW] = h << 8;
> if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
> && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL,
> &l) == 0)
> - data->temp11[1] |= l;
> + data->temp11[TEMP11_REMOTE_LOW] |= l;
> }
> if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) {
> - data->temp11[2] = h << 8;
> + data->temp11[TEMP11_REMOTE_HIGH] = h << 8;
> if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
> && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL,
> &l) == 0)
> - data->temp11[2] |= l;
> + data->temp11[TEMP11_REMOTE_HIGH] |= l;
> }
>
> if (data->flags & LM90_HAVE_OFFSET) {
> @@ -529,13 +570,14 @@ static struct lm90_data *lm90_update_device(struct device *dev)
> &h) == 0
> && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
> &l) == 0)
> - data->temp11[3] = (h << 8) | l;
> + data->temp11[TEMP11_REMOTE_OFFSET] =
> + (h << 8) | l;
> }
> if (data->flags & LM90_HAVE_EMERGENCY) {
> lm90_read_reg(client, MAX6659_REG_R_LOCAL_EMERG,
> - &data->temp8[4]);
> + &data->temp8[TEMP8_LOCAL_EMERG]);
> lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
> - &data->temp8[5]);
> + &data->temp8[TEMP8_REMOTE_EMERG]);
> }
> lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
> data->alarms = alarms; /* save as 16 bit value */
> @@ -543,15 +585,16 @@ static struct lm90_data *lm90_update_device(struct device *dev)
> if (data->kind == max6696) {
> lm90_select_remote_channel(client, data, 1);
> lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
> - &data->temp8[6]);
> + &data->temp8[TEMP8_REMOTE2_CRIT]);
> lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
> - &data->temp8[7]);
> + &data->temp8[TEMP8_REMOTE2_EMERG]);
> lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
> - LM90_REG_R_REMOTE_TEMPL, &data->temp11[5]);
> + LM90_REG_R_REMOTE_TEMPL,
> + &data->temp11[TEMP11_REMOTE2_TEMP]);
> if (!lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h))
> - data->temp11[6] = h << 8;
> + data->temp11[TEMP11_REMOTE2_LOW] = h << 8;
> if (!lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h))
> - data->temp11[7] = h << 8;
> + data->temp11[TEMP11_REMOTE2_HIGH] = h << 8;
> lm90_select_remote_channel(client, data, 0);
>
> if (!lm90_read_reg(client, MAX6696_REG_R_STATUS2,
> @@ -748,7 +791,7 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
>
> static void write_temp8(struct device *dev, int index, long val)
> {
> - static const u8 reg[8] = {
> + static const u8 reg[TEMP8_REG_NUM] = {
> LM90_REG_W_LOCAL_LOW,
> LM90_REG_W_LOCAL_HIGH,
> LM90_REG_W_LOCAL_CRIT,
> @@ -834,7 +877,7 @@ static void write_temp11(struct device *dev, int nr, int index, long val)
> u8 high;
> u8 low;
> int channel;
> - } reg[5] = {
> + } reg[NR_NUM] = {
> { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 0 },
> { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 0 },
> { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL, 0 },
> @@ -925,11 +968,12 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
>
> mutex_lock(&data->update_lock);
> if (data->kind == adt7461)
> - temp = temp_from_u8_adt7461(data, data->temp8[2]);
> + temp = temp_from_u8_adt7461(data,
> + data->temp8[TEMP8_LOCAL_CRIT]);
> else if (data->kind == max6646)
> - temp = temp_from_u8(data->temp8[2]);
> + temp = temp_from_u8(data->temp8[TEMP8_LOCAL_CRIT]);
> else
> - temp = temp_from_s8(data->temp8[2]);
> + temp = temp_from_s8(data->temp8[TEMP8_LOCAL_CRIT]);
>
> data->temp_hyst = hyst_to_reg(temp - val);
> i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
> @@ -983,25 +1027,28 @@ static ssize_t set_update_interval(struct device *dev,
> return count;
> }
>
> -static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL, 0, 4);
> -static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL, 0, 0);
> +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL,
> + NR_CHAN_0_REMOTE_LOW, TEMP11_LOCAL_TEMP);
> +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL,
> + NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE_TEMP);
> static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 0);
> + set_temp8, TEMP8_LOCAL_LOW);
> static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 0, 1);
> + set_temp11, NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE_LOW);
> static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 1);
> + set_temp8, TEMP8_LOCAL_HIGH);
> static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 1, 2);
> + set_temp11, NR_CHAN_0_REMOTE_HIGH, TEMP11_REMOTE_HIGH);
> static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 2);
> + set_temp8, TEMP8_LOCAL_CRIT);
> static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 3);
> + set_temp8, TEMP8_REMOTE_CRIT);
> static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
> - set_temphyst, 2);
> -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 3);
> + set_temphyst, TEMP8_LOCAL_CRIT);
> +static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL,
> + TEMP8_REMOTE_CRIT);
> static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 2, 3);
> + set_temp11, NR_CHAN_0_REMOTE_OFFSET, TEMP11_REMOTE_OFFSET);
>
> /* Individual alarm files */
> static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
> @@ -1049,13 +1096,13 @@ static const struct attribute_group lm90_group = {
> * Additional attributes for devices with emergency sensors
> */
> static SENSOR_DEVICE_ATTR(temp1_emergency, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 4);
> + set_temp8, TEMP8_LOCAL_EMERG);
> static SENSOR_DEVICE_ATTR(temp2_emergency, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 5);
> + set_temp8, TEMP8_REMOTE_EMERG);
> static SENSOR_DEVICE_ATTR(temp1_emergency_hyst, S_IRUGO, show_temphyst,
> - NULL, 4);
> + NULL, TEMP8_LOCAL_EMERG);
> static SENSOR_DEVICE_ATTR(temp2_emergency_hyst, S_IRUGO, show_temphyst,
> - NULL, 5);
> + NULL, TEMP8_REMOTE_EMERG);
>
> static struct attribute *lm90_emergency_attributes[] = {
> &sensor_dev_attr_temp1_emergency.dev_attr.attr,
> @@ -1085,18 +1132,20 @@ static const struct attribute_group lm90_emergency_alarm_group = {
> /*
> * Additional attributes for devices with 3 temperature sensors
> */
> -static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL, 0, 5);
> +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL,
> + NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE2_TEMP);
> static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 3, 6);
> + set_temp11, NR_CHAN_1_REMOTE_LOW, TEMP11_REMOTE2_LOW);
> static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 4, 7);
> + set_temp11, NR_CHAN_1_REMOTE_HIGH, TEMP11_REMOTE2_HIGH);
> static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 6);
> -static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL, 6);
> + set_temp8, TEMP8_REMOTE2_CRIT);
> +static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL,
> + TEMP8_REMOTE2_CRIT);
> static SENSOR_DEVICE_ATTR(temp3_emergency, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 7);
> + set_temp8, TEMP8_REMOTE2_EMERG);
> static SENSOR_DEVICE_ATTR(temp3_emergency_hyst, S_IRUGO, show_temphyst,
> - NULL, 7);
> + NULL, TEMP8_REMOTE2_EMERG);
>
> static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
> static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 10);
> --
> 1.7.9.5
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Wei Ni <wni@nvidia.com>
Cc: khali@linux-fr.org, swarren@wwwdotorg.org,
thierry.reding@gmail.com, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH v2 3/3] hwmon: (lm90) use enums for the indexes of temp8 and temp11
Date: Wed, 10 Jul 2013 18:25:08 +0000 [thread overview]
Message-ID: <20130710182508.GD22430@roeck-us.net> (raw)
In-Reply-To: <1373455539-2831-4-git-send-email-wni@nvidia.com>
On Wed, Jul 10, 2013 at 07:25:39PM +0800, Wei Ni wrote:
> Using enums for the indexes and nrs of temp8 and temp11.
> This make the code much more readable.
>
> Signed-off-by: Wei Ni <wni@nvidia.com>
I don't really have a strong opinion on this one. Nice, but is it really worth it ?
Jean, any comments ?
Guenter
> ---
> drivers/hwmon/lm90.c | 179 ++++++++++++++++++++++++++++++++------------------
> 1 file changed, 114 insertions(+), 65 deletions(-)
>
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> index 88ff362..14e0b5b 100644
> --- a/drivers/hwmon/lm90.c
> +++ b/drivers/hwmon/lm90.c
> @@ -310,6 +310,59 @@ static const struct lm90_params lm90_params[] = {
> };
>
> /*
> + * TEMP8 register index
> + */
> +enum lm90_temp8_reg_index {
> + TEMP8_LOCAL_LOW = 0, /* 0: local low limit */
> + TEMP8_LOCAL_HIGH, /* 1: local high limit */
> + TEMP8_LOCAL_CRIT, /* 2: local critical limit */
> + TEMP8_REMOTE_CRIT, /* 3: remote critical limit */
> + TEMP8_LOCAL_EMERG, /* 4: local emergency limit
> + * (max6659 and max6695/96)
> + */
> + TEMP8_REMOTE_EMERG, /* 5: remote emergency limit
> + * (max6659 and max6695/96)
> + */
> + TEMP8_REMOTE2_CRIT, /* 6: remote 2 critical limit
> + * (max6695/96 only)
> + */
> + TEMP8_REMOTE2_EMERG, /* 7: remote 2 emergency limit
> + * (max6695/96 only)
> + */
> + TEMP8_REG_NUM
> +};
> +
> +/*
> + * TEMP11 register index
> + */
> +enum lm90_temp11_reg_index {
> + TEMP11_REMOTE_TEMP = 0, /* 0: remote input */
> + TEMP11_REMOTE_LOW, /* 1: remote low limit */
> + TEMP11_REMOTE_HIGH, /* 2: remote high limit */
> + TEMP11_REMOTE_OFFSET, /* 3: remote offset
> + * (except max6646, max6657/58/59,
> + * and max6695/96)
> + */
> + TEMP11_LOCAL_TEMP, /* 4: local input */
> + TEMP11_REMOTE2_TEMP, /* 5: remote 2 input (max6695/96 only) */
> + TEMP11_REMOTE2_LOW, /* 6: remote 2 low limit (max6695/96 only) */
> + TEMP11_REMOTE2_HIGH, /* 7: remote 2 high limit (max6695/96 only) */
> + TEMP11_REG_NUM
> +};
> +
> +/*
> + * TEMP11 register NR
> + */
> +enum lm90_temp11_reg_nr {
> + NR_CHAN_0_REMOTE_LOW = 0, /* 0: channel 0, remote low limit */
> + NR_CHAN_0_REMOTE_HIGH, /* 1: channel 0, remote high limit */
> + NR_CHAN_0_REMOTE_OFFSET, /* 2: channel 0, remote offset */
> + NR_CHAN_1_REMOTE_LOW, /* 3: channel 1, remote low limit */
> + NR_CHAN_1_REMOTE_HIGH, /* 4: channel 1, remote high limit */
> + NR_NUM /* number of the NRs for temp11 */
> +};
> +
> +/*
> * Client data (each client gets its own)
> */
>
> @@ -331,25 +384,8 @@ struct lm90_data {
> u8 reg_local_ext; /* local extension register offset */
>
> /* registers values */
> - s8 temp8[8]; /* 0: local low limit
> - * 1: local high limit
> - * 2: local critical limit
> - * 3: remote critical limit
> - * 4: local emergency limit (max6659 and max6695/96)
> - * 5: remote emergency limit (max6659 and max6695/96)
> - * 6: remote 2 critical limit (max6695/96 only)
> - * 7: remote 2 emergency limit (max6695/96 only)
> - */
> - s16 temp11[8]; /* 0: remote input
> - * 1: remote low limit
> - * 2: remote high limit
> - * 3: remote offset (except max6646, max6657/58/59,
> - * and max6695/96)
> - * 4: local input
> - * 5: remote 2 input (max6695/96 only)
> - * 6: remote 2 low limit (max6695/96 only)
> - * 7: remote 2 high limit (max6695/96 only)
> - */
> + s8 temp8[TEMP8_REG_NUM];
> + s16 temp11[TEMP11_REG_NUM];
> u8 temp_hyst;
> u16 alarms; /* bitvector (upper 8 bits for max6695/96) */
> };
> @@ -491,37 +527,42 @@ static struct lm90_data *lm90_update_device(struct device *dev)
> u8 alarms;
>
> dev_dbg(&client->dev, "Updating lm90 data.\n");
> - lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]);
> - lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]);
> - lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]);
> - lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]);
> + lm90_read_reg(client, LM90_REG_R_LOCAL_LOW,
> + &data->temp8[TEMP8_LOCAL_LOW]);
> + lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH,
> + &data->temp8[TEMP8_LOCAL_HIGH]);
> + lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT,
> + &data->temp8[TEMP8_LOCAL_CRIT]);
> + lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
> + &data->temp8[TEMP8_REMOTE_CRIT]);
> lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
>
> if (data->reg_local_ext) {
> lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
> data->reg_local_ext,
> - &data->temp11[4]);
> + &data->temp11[TEMP11_LOCAL_TEMP]);
> } else {
> if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
> &h) = 0)
> - data->temp11[4] = h << 8;
> + data->temp11[TEMP11_LOCAL_TEMP] = h << 8;
> }
> lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
> - LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]);
> + LM90_REG_R_REMOTE_TEMPL,
> + &data->temp11[TEMP11_REMOTE_TEMP]);
>
> if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) = 0) {
> - data->temp11[1] = h << 8;
> + data->temp11[TEMP11_REMOTE_LOW] = h << 8;
> if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
> && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL,
> &l) = 0)
> - data->temp11[1] |= l;
> + data->temp11[TEMP11_REMOTE_LOW] |= l;
> }
> if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) = 0) {
> - data->temp11[2] = h << 8;
> + data->temp11[TEMP11_REMOTE_HIGH] = h << 8;
> if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
> && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL,
> &l) = 0)
> - data->temp11[2] |= l;
> + data->temp11[TEMP11_REMOTE_HIGH] |= l;
> }
>
> if (data->flags & LM90_HAVE_OFFSET) {
> @@ -529,13 +570,14 @@ static struct lm90_data *lm90_update_device(struct device *dev)
> &h) = 0
> && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
> &l) = 0)
> - data->temp11[3] = (h << 8) | l;
> + data->temp11[TEMP11_REMOTE_OFFSET] > + (h << 8) | l;
> }
> if (data->flags & LM90_HAVE_EMERGENCY) {
> lm90_read_reg(client, MAX6659_REG_R_LOCAL_EMERG,
> - &data->temp8[4]);
> + &data->temp8[TEMP8_LOCAL_EMERG]);
> lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
> - &data->temp8[5]);
> + &data->temp8[TEMP8_REMOTE_EMERG]);
> }
> lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
> data->alarms = alarms; /* save as 16 bit value */
> @@ -543,15 +585,16 @@ static struct lm90_data *lm90_update_device(struct device *dev)
> if (data->kind = max6696) {
> lm90_select_remote_channel(client, data, 1);
> lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
> - &data->temp8[6]);
> + &data->temp8[TEMP8_REMOTE2_CRIT]);
> lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
> - &data->temp8[7]);
> + &data->temp8[TEMP8_REMOTE2_EMERG]);
> lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
> - LM90_REG_R_REMOTE_TEMPL, &data->temp11[5]);
> + LM90_REG_R_REMOTE_TEMPL,
> + &data->temp11[TEMP11_REMOTE2_TEMP]);
> if (!lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h))
> - data->temp11[6] = h << 8;
> + data->temp11[TEMP11_REMOTE2_LOW] = h << 8;
> if (!lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h))
> - data->temp11[7] = h << 8;
> + data->temp11[TEMP11_REMOTE2_HIGH] = h << 8;
> lm90_select_remote_channel(client, data, 0);
>
> if (!lm90_read_reg(client, MAX6696_REG_R_STATUS2,
> @@ -748,7 +791,7 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
>
> static void write_temp8(struct device *dev, int index, long val)
> {
> - static const u8 reg[8] = {
> + static const u8 reg[TEMP8_REG_NUM] = {
> LM90_REG_W_LOCAL_LOW,
> LM90_REG_W_LOCAL_HIGH,
> LM90_REG_W_LOCAL_CRIT,
> @@ -834,7 +877,7 @@ static void write_temp11(struct device *dev, int nr, int index, long val)
> u8 high;
> u8 low;
> int channel;
> - } reg[5] = {
> + } reg[NR_NUM] = {
> { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 0 },
> { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 0 },
> { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL, 0 },
> @@ -925,11 +968,12 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
>
> mutex_lock(&data->update_lock);
> if (data->kind = adt7461)
> - temp = temp_from_u8_adt7461(data, data->temp8[2]);
> + temp = temp_from_u8_adt7461(data,
> + data->temp8[TEMP8_LOCAL_CRIT]);
> else if (data->kind = max6646)
> - temp = temp_from_u8(data->temp8[2]);
> + temp = temp_from_u8(data->temp8[TEMP8_LOCAL_CRIT]);
> else
> - temp = temp_from_s8(data->temp8[2]);
> + temp = temp_from_s8(data->temp8[TEMP8_LOCAL_CRIT]);
>
> data->temp_hyst = hyst_to_reg(temp - val);
> i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
> @@ -983,25 +1027,28 @@ static ssize_t set_update_interval(struct device *dev,
> return count;
> }
>
> -static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL, 0, 4);
> -static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL, 0, 0);
> +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL,
> + NR_CHAN_0_REMOTE_LOW, TEMP11_LOCAL_TEMP);
> +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL,
> + NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE_TEMP);
> static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 0);
> + set_temp8, TEMP8_LOCAL_LOW);
> static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 0, 1);
> + set_temp11, NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE_LOW);
> static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 1);
> + set_temp8, TEMP8_LOCAL_HIGH);
> static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 1, 2);
> + set_temp11, NR_CHAN_0_REMOTE_HIGH, TEMP11_REMOTE_HIGH);
> static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 2);
> + set_temp8, TEMP8_LOCAL_CRIT);
> static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 3);
> + set_temp8, TEMP8_REMOTE_CRIT);
> static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
> - set_temphyst, 2);
> -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 3);
> + set_temphyst, TEMP8_LOCAL_CRIT);
> +static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL,
> + TEMP8_REMOTE_CRIT);
> static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 2, 3);
> + set_temp11, NR_CHAN_0_REMOTE_OFFSET, TEMP11_REMOTE_OFFSET);
>
> /* Individual alarm files */
> static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
> @@ -1049,13 +1096,13 @@ static const struct attribute_group lm90_group = {
> * Additional attributes for devices with emergency sensors
> */
> static SENSOR_DEVICE_ATTR(temp1_emergency, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 4);
> + set_temp8, TEMP8_LOCAL_EMERG);
> static SENSOR_DEVICE_ATTR(temp2_emergency, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 5);
> + set_temp8, TEMP8_REMOTE_EMERG);
> static SENSOR_DEVICE_ATTR(temp1_emergency_hyst, S_IRUGO, show_temphyst,
> - NULL, 4);
> + NULL, TEMP8_LOCAL_EMERG);
> static SENSOR_DEVICE_ATTR(temp2_emergency_hyst, S_IRUGO, show_temphyst,
> - NULL, 5);
> + NULL, TEMP8_REMOTE_EMERG);
>
> static struct attribute *lm90_emergency_attributes[] = {
> &sensor_dev_attr_temp1_emergency.dev_attr.attr,
> @@ -1085,18 +1132,20 @@ static const struct attribute_group lm90_emergency_alarm_group = {
> /*
> * Additional attributes for devices with 3 temperature sensors
> */
> -static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL, 0, 5);
> +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL,
> + NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE2_TEMP);
> static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 3, 6);
> + set_temp11, NR_CHAN_1_REMOTE_LOW, TEMP11_REMOTE2_LOW);
> static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp11,
> - set_temp11, 4, 7);
> + set_temp11, NR_CHAN_1_REMOTE_HIGH, TEMP11_REMOTE2_HIGH);
> static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 6);
> -static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL, 6);
> + set_temp8, TEMP8_REMOTE2_CRIT);
> +static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL,
> + TEMP8_REMOTE2_CRIT);
> static SENSOR_DEVICE_ATTR(temp3_emergency, S_IWUSR | S_IRUGO, show_temp8,
> - set_temp8, 7);
> + set_temp8, TEMP8_REMOTE2_EMERG);
> static SENSOR_DEVICE_ATTR(temp3_emergency_hyst, S_IRUGO, show_temphyst,
> - NULL, 7);
> + NULL, TEMP8_REMOTE2_EMERG);
>
> static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
> static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 10);
> --
> 1.7.9.5
>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2013-07-10 18:25 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-10 11:25 [PATCH v2 0/3] Lm90 Enhancements Wei Ni
2013-07-10 11:25 ` Wei Ni
2013-07-10 11:25 ` [lm-sensors] " Wei Ni
2013-07-10 11:25 ` [PATCH v2 1/3] hwmon: (lm90) split set&show temp as common codes Wei Ni
2013-07-10 11:25 ` Wei Ni
2013-07-10 11:25 ` [lm-sensors] " Wei Ni
[not found] ` <1373455539-2831-2-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-10 18:21 ` Guenter Roeck
2013-07-10 18:21 ` Guenter Roeck
2013-07-10 18:21 ` [lm-sensors] " Guenter Roeck
[not found] ` <20130710182154.GC22430-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-07-11 8:42 ` Wei Ni
2013-07-11 8:42 ` Wei Ni
2013-07-11 8:42 ` [lm-sensors] " Wei Ni
[not found] ` <1373455539-2831-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-10 11:25 ` [PATCH v2 2/3] hwmon: (lm90) add support to handle IRQ Wei Ni
2013-07-10 11:25 ` Wei Ni
2013-07-10 11:25 ` [lm-sensors] " Wei Ni
[not found] ` <1373455539-2831-3-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-10 17:05 ` Thierry Reding
2013-07-10 17:05 ` Thierry Reding
2013-07-10 17:05 ` [lm-sensors] " Thierry Reding
[not found] ` <20130710170552.GA15665-RcKxWJ4Cfj3FNiLNb7+IINdj8bHVeoWogfoxzgwHRXE@public.gmane.org>
2013-07-10 18:12 ` Guenter Roeck
2013-07-10 18:12 ` Guenter Roeck
2013-07-10 18:12 ` [lm-sensors] " Guenter Roeck
[not found] ` <20130710181248.GA22430-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-07-10 18:49 ` Thierry Reding
2013-07-10 18:49 ` Thierry Reding
2013-07-10 18:49 ` [lm-sensors] " Thierry Reding
2013-07-11 8:36 ` Wei Ni
2013-07-11 8:36 ` Wei Ni
2013-07-11 8:36 ` [lm-sensors] " Wei Ni
2013-07-10 18:18 ` Guenter Roeck
2013-07-10 18:18 ` Guenter Roeck
2013-07-10 18:18 ` [lm-sensors] " Guenter Roeck
[not found] ` <20130710181820.GB22430-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-07-11 8:40 ` Wei Ni
2013-07-11 8:40 ` Wei Ni
2013-07-11 8:40 ` [lm-sensors] " Wei Ni
2013-07-10 11:25 ` [PATCH v2 3/3] hwmon: (lm90) use enums for the indexes of temp8 and temp11 Wei Ni
2013-07-10 11:25 ` Wei Ni
2013-07-10 11:25 ` [lm-sensors] " Wei Ni
2013-07-10 18:25 ` Guenter Roeck [this message]
2013-07-10 18:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130710182508.GD22430@roeck-us.net \
--to=linux@roeck-us.net \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.