From: Mike Turquette <mturquette@linaro.org>
To: Cho KyongHo <pullip.cho@samsung.com>,
'Linux ARM Kernel' <linux-arm-kernel@lists.infradead.org>,
'Linux IOMMU' <iommu@lists.linux-foundation.org>,
'Linux Kernel' <linux-kernel@vger.kernel.org>,
'Linux Samsung SOC' <linux-samsung-soc@vger.kernel.org>
Cc: 'Kukjin Kim' <kgene.kim@samsung.com>,
'Hyunwoong Kim' <khw0178.kim@samsung.com>,
'Prathyush' <prathyush.k@samsung.com>,
'Grant Grundler' <grundler@chromium.org>,
'Joerg Roedel' <joro@8bytes.org>,
'Keyyoung Park' <keyyoung.park@samsung.com>,
'Subash Patel' <supash.ramaswamy@linaro.org>,
'Sachin Kamat' <sachin.kamat@linaro.org>,
'Thomas Abraham' <thomas.abraham@linaro.org>,
'Antonios Motakis' <a.motakis@virtualopensystems.com>,
kvmarm@lists.cs.columbia.edu,
'Rahul Sharma' <rahul.sharma@samsung.com>
Subject: Re: [PATCH v8 05/12] clk: exynos5250: add gate clock descriptions of System MMU
Date: Fri, 26 Jul 2013 13:01:07 -0700 [thread overview]
Message-ID: <20130726200107.7598.82010@quantum> (raw)
In-Reply-To: <003b01ce89f3$2be4db80$83ae9280$@samsung.com>
Quoting Cho KyongHo (2013-07-26 04:27:54)
> This adds gate clocks of all System MMUs and their master IPs
> that are not apeared in clk-exynos5250.c
>
> Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>
Change looks good to me. Are you OK if I take it into the clk tree or do
you want to keep this series together?
Regards,
Mike
> ---
> .../devicetree/bindings/clock/exynos5250-clock.txt | 28 +++++++++-
> drivers/clk/samsung/clk-exynos5250.c | 57 ++++++++++++++++---
> 2 files changed, 75 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> index 781a627..df49694 100644
> --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> @@ -154,7 +154,33 @@ clock which they consume.
> dsim0 341
> dp 342
> mixer 343
> - hdmi 345
> + hdmi 344
> + camif_top 345
> + smmu_fimc_lite0 346
> + smmu_fimc_lite1 347
> + smmu_fimc_lite2 348
> + smmu_tv 349
> + smmu_fimd1 350
> + smmu_2d 351
> + fimc_isp 352
> + fimc_drc 353
> + fimc_fd 354
> + fimc_scc 355
> + fimc_scp 356
> + fimc_mcuctl 357
> + fimc_odc 358
> + fimc_dis 359
> + fimc_3dnr 360
> + smmu_fimc_isp 361
> + smmu_fimc_drc 362
> + smmu_fimc_fd 363
> + smmu_fimc_scc 364
> + smmu_fimc_scp 365
> + smmu_fimc_mcuctl 366
> + smmu_fimc_odc 367
> + smmu_fimc_dis0 368
> + smmu_fimc_dis1 369
> + smmu_fimc_3dnr 370
>
> Example 1: An example of a clock controller node is listed below.
>
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index 22d7699..e242bde 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -53,12 +53,15 @@
> #define DIV_PERIC3 0x10564
> #define DIV_PERIC4 0x10568
> #define DIV_PERIC5 0x1056c
> +#define GATE_IP_ISP0 0x0C800
> +#define GATE_IP_ISP1 0x0C800
> #define GATE_IP_GSCL 0x10920
> #define GATE_IP_MFC 0x1092c
> #define GATE_IP_GEN 0x10934
> #define GATE_IP_FSYS 0x10944
> #define GATE_IP_PERIC 0x10950
> #define GATE_IP_PERIS 0x10960
> +#define GATE_IP_ACP 0x18800
> #define SRC_CDREX 0x20200
> #define PLL_DIV2_SEL 0x20a24
> #define GATE_IP_DISP1 0x10928
> @@ -100,6 +103,14 @@ enum exynos5250_clks {
> tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
> wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
>
> + camif_top, smmu_fimc_lite0, smmu_fimc_lite1, smmu_fimc_lite2,
> + smmu_tv, smmu_fimd1, smmu_2d,
> + fimc_isp, fimc_drc, fimc_fd, fimc_scc, fimc_scp, fimc_mcuctl, fimc_odc,
> + fimc_dis, fimc_3dnr,
> + smmu_fimc_isp, smmu_fimc_drc, smmu_fimc_fd, smmu_fimc_scc,
> + smmu_fimc_scp, smmu_fimc_mcuctl, smmu_fimc_odc, smmu_fimc_dis0,
> + smmu_fimc_dis1, smmu_fimc_3dnr,
> +
> nr_clks,
> };
>
> @@ -320,19 +331,26 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
> GATE(gscl3, "gscl3", "aclk266", GATE_IP_GSCL, 3, 0, 0),
> GATE(gscl_wa, "gscl_wa", "div_gscl_wa", GATE_IP_GSCL, 5, 0, 0),
> GATE(gscl_wb, "gscl_wb", "div_gscl_wb", GATE_IP_GSCL, 6, 0, 0),
> - GATE(smmu_gscl0, "smmu_gscl0", "aclk266", GATE_IP_GSCL, 7, 0, 0),
> - GATE(smmu_gscl1, "smmu_gscl1", "aclk266", GATE_IP_GSCL, 8, 0, 0),
> - GATE(smmu_gscl2, "smmu_gscl2", "aclk266", GATE_IP_GSCL, 9, 0, 0),
> - GATE(smmu_gscl3, "smmu_gscl3", "aclk266", GATE_IP_GSCL, 10, 0, 0),
> + GATE(smmu_gscl0, "smmu_gscl0", "none", GATE_IP_GSCL, 7, 0, 0),
> + GATE(smmu_gscl1, "smmu_gscl1", "none", GATE_IP_GSCL, 8, 0, 0),
> + GATE(smmu_gscl2, "smmu_gscl2", "none", GATE_IP_GSCL, 9, 0, 0),
> + GATE(smmu_gscl3, "smmu_gscl3", "none", GATE_IP_GSCL, 10, 0, 0),
> + GATE(camif_top, "camif_top", "aclk266", GATE_IP_GSCL, 4, 0, 0),
> + GATE(smmu_fimc_lite0, "smmu_fimc_lite0", "none",
> + GATE_IP_GSCL, 12, 0, 0),
> + GATE(smmu_fimc_lite1, "smmu_fimc_lite1", "none",
> + GATE_IP_GSCL, 13, 0, 0),
> + GATE(smmu_fimc_lite2, "smmu_fimc_lite2", "none",
> + GATE_IP_GSCL, 14, 0, 0),
> GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
> - GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
> - GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
> + GATE(smmu_mfcr, "smmu_mfcr", "none", GATE_IP_MFC, 1, 0, 0),
> + GATE(smmu_mfcl, "smmu_mfcl", "none", GATE_IP_MFC, 2, 0, 0),
> GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
> GATE(jpeg, "jpeg", "aclk166", GATE_IP_GEN, 2, 0, 0),
> GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
> - GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
> - GATE(smmu_jpeg, "smmu_jpeg", "aclk166", GATE_IP_GEN, 7, 0, 0),
> - GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
> + GATE(smmu_rotator, "smmu_rotator", "none", GATE_IP_GEN, 6, 0, 0),
> + GATE(smmu_jpeg, "smmu_jpeg", "none", GATE_IP_GEN, 7, 0, 0),
> + GATE(smmu_mdma1, "smmu_mdma1", "none", GATE_IP_GEN, 9, 0, 0),
> GATE(pdma0, "pdma0", "aclk200", GATE_IP_FSYS, 1, 0, 0),
> GATE(pdma1, "pdma1", "aclk200", GATE_IP_FSYS, 2, 0, 0),
> GATE(sata, "sata", "aclk200", GATE_IP_FSYS, 6, 0, 0),
> @@ -462,6 +480,27 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
> GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
> GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
> GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
> + GATE(smmu_tv, "smmu_tv", "none", GATE_IP_DISP1, 2, 0, 0),
> + GATE(smmu_fimd1, "smmu_fimd1", "none", GATE_IP_DISP1, 8, 0, 0),
> +
> + GATE(smmu_fimc_isp, "smmu_fimc_isp", "none", GATE_IP_ISP0, 8, 0, 0),
> + GATE(smmu_fimc_drc, "smmu_fimc_drc", "none", GATE_IP_ISP0, 9, 0, 0),
> + GATE(smmu_fimc_fd, "smmu_fimc_fd", "none", GATE_IP_ISP0, 10, 0, 0),
> + GATE(smmu_fimc_scc, "smmu_fimc_scc", "none",
> + GATE_IP_ISP0, 11, 0, 0),
> + GATE(smmu_fimc_scp, "smmu_fimc_scp", "none",
> + GATE_IP_ISP0, 12, 0, 0),
> + GATE(smmu_fimc_mcuctl, "smmu_fimc_mcuctl", "none",
> + GATE_IP_ISP0, 13, 0, 0),
> + GATE(smmu_fimc_odc, "smmu_fimc_odc", "none", GATE_IP_ISP1, 4, 0, 0),
> + GATE(smmu_fimc_dis0, "smmu_fimc_dis0", "none",
> + GATE_IP_ISP1, 5, 0, 0),
> + GATE(smmu_fimc_dis1, "smmu_fimc_dis1", "none",
> + GATE_IP_ISP1, 6, 0, 0),
> + GATE(smmu_fimc_3dnr, "smmu_fimc_3dnr", "none",
> + GATE_IP_ISP1, 7, 0, 0),
> +
> + GATE(smmu_2d, "smmu_2d", "none", GATE_IP_ACP, 7, 0, 0),
> };
>
> static __initdata struct of_device_id ext_clk_match[] = {
> --
> 1.7.2.5
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 05/12] clk: exynos5250: add gate clock descriptions of System MMU
Date: Fri, 26 Jul 2013 13:01:07 -0700 [thread overview]
Message-ID: <20130726200107.7598.82010@quantum> (raw)
In-Reply-To: <003b01ce89f3$2be4db80$83ae9280$@samsung.com>
Quoting Cho KyongHo (2013-07-26 04:27:54)
> This adds gate clocks of all System MMUs and their master IPs
> that are not apeared in clk-exynos5250.c
>
> Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>
Change looks good to me. Are you OK if I take it into the clk tree or do
you want to keep this series together?
Regards,
Mike
> ---
> .../devicetree/bindings/clock/exynos5250-clock.txt | 28 +++++++++-
> drivers/clk/samsung/clk-exynos5250.c | 57 ++++++++++++++++---
> 2 files changed, 75 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> index 781a627..df49694 100644
> --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> @@ -154,7 +154,33 @@ clock which they consume.
> dsim0 341
> dp 342
> mixer 343
> - hdmi 345
> + hdmi 344
> + camif_top 345
> + smmu_fimc_lite0 346
> + smmu_fimc_lite1 347
> + smmu_fimc_lite2 348
> + smmu_tv 349
> + smmu_fimd1 350
> + smmu_2d 351
> + fimc_isp 352
> + fimc_drc 353
> + fimc_fd 354
> + fimc_scc 355
> + fimc_scp 356
> + fimc_mcuctl 357
> + fimc_odc 358
> + fimc_dis 359
> + fimc_3dnr 360
> + smmu_fimc_isp 361
> + smmu_fimc_drc 362
> + smmu_fimc_fd 363
> + smmu_fimc_scc 364
> + smmu_fimc_scp 365
> + smmu_fimc_mcuctl 366
> + smmu_fimc_odc 367
> + smmu_fimc_dis0 368
> + smmu_fimc_dis1 369
> + smmu_fimc_3dnr 370
>
> Example 1: An example of a clock controller node is listed below.
>
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index 22d7699..e242bde 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -53,12 +53,15 @@
> #define DIV_PERIC3 0x10564
> #define DIV_PERIC4 0x10568
> #define DIV_PERIC5 0x1056c
> +#define GATE_IP_ISP0 0x0C800
> +#define GATE_IP_ISP1 0x0C800
> #define GATE_IP_GSCL 0x10920
> #define GATE_IP_MFC 0x1092c
> #define GATE_IP_GEN 0x10934
> #define GATE_IP_FSYS 0x10944
> #define GATE_IP_PERIC 0x10950
> #define GATE_IP_PERIS 0x10960
> +#define GATE_IP_ACP 0x18800
> #define SRC_CDREX 0x20200
> #define PLL_DIV2_SEL 0x20a24
> #define GATE_IP_DISP1 0x10928
> @@ -100,6 +103,14 @@ enum exynos5250_clks {
> tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
> wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
>
> + camif_top, smmu_fimc_lite0, smmu_fimc_lite1, smmu_fimc_lite2,
> + smmu_tv, smmu_fimd1, smmu_2d,
> + fimc_isp, fimc_drc, fimc_fd, fimc_scc, fimc_scp, fimc_mcuctl, fimc_odc,
> + fimc_dis, fimc_3dnr,
> + smmu_fimc_isp, smmu_fimc_drc, smmu_fimc_fd, smmu_fimc_scc,
> + smmu_fimc_scp, smmu_fimc_mcuctl, smmu_fimc_odc, smmu_fimc_dis0,
> + smmu_fimc_dis1, smmu_fimc_3dnr,
> +
> nr_clks,
> };
>
> @@ -320,19 +331,26 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
> GATE(gscl3, "gscl3", "aclk266", GATE_IP_GSCL, 3, 0, 0),
> GATE(gscl_wa, "gscl_wa", "div_gscl_wa", GATE_IP_GSCL, 5, 0, 0),
> GATE(gscl_wb, "gscl_wb", "div_gscl_wb", GATE_IP_GSCL, 6, 0, 0),
> - GATE(smmu_gscl0, "smmu_gscl0", "aclk266", GATE_IP_GSCL, 7, 0, 0),
> - GATE(smmu_gscl1, "smmu_gscl1", "aclk266", GATE_IP_GSCL, 8, 0, 0),
> - GATE(smmu_gscl2, "smmu_gscl2", "aclk266", GATE_IP_GSCL, 9, 0, 0),
> - GATE(smmu_gscl3, "smmu_gscl3", "aclk266", GATE_IP_GSCL, 10, 0, 0),
> + GATE(smmu_gscl0, "smmu_gscl0", "none", GATE_IP_GSCL, 7, 0, 0),
> + GATE(smmu_gscl1, "smmu_gscl1", "none", GATE_IP_GSCL, 8, 0, 0),
> + GATE(smmu_gscl2, "smmu_gscl2", "none", GATE_IP_GSCL, 9, 0, 0),
> + GATE(smmu_gscl3, "smmu_gscl3", "none", GATE_IP_GSCL, 10, 0, 0),
> + GATE(camif_top, "camif_top", "aclk266", GATE_IP_GSCL, 4, 0, 0),
> + GATE(smmu_fimc_lite0, "smmu_fimc_lite0", "none",
> + GATE_IP_GSCL, 12, 0, 0),
> + GATE(smmu_fimc_lite1, "smmu_fimc_lite1", "none",
> + GATE_IP_GSCL, 13, 0, 0),
> + GATE(smmu_fimc_lite2, "smmu_fimc_lite2", "none",
> + GATE_IP_GSCL, 14, 0, 0),
> GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
> - GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
> - GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
> + GATE(smmu_mfcr, "smmu_mfcr", "none", GATE_IP_MFC, 1, 0, 0),
> + GATE(smmu_mfcl, "smmu_mfcl", "none", GATE_IP_MFC, 2, 0, 0),
> GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
> GATE(jpeg, "jpeg", "aclk166", GATE_IP_GEN, 2, 0, 0),
> GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
> - GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
> - GATE(smmu_jpeg, "smmu_jpeg", "aclk166", GATE_IP_GEN, 7, 0, 0),
> - GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
> + GATE(smmu_rotator, "smmu_rotator", "none", GATE_IP_GEN, 6, 0, 0),
> + GATE(smmu_jpeg, "smmu_jpeg", "none", GATE_IP_GEN, 7, 0, 0),
> + GATE(smmu_mdma1, "smmu_mdma1", "none", GATE_IP_GEN, 9, 0, 0),
> GATE(pdma0, "pdma0", "aclk200", GATE_IP_FSYS, 1, 0, 0),
> GATE(pdma1, "pdma1", "aclk200", GATE_IP_FSYS, 2, 0, 0),
> GATE(sata, "sata", "aclk200", GATE_IP_FSYS, 6, 0, 0),
> @@ -462,6 +480,27 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
> GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
> GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
> GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
> + GATE(smmu_tv, "smmu_tv", "none", GATE_IP_DISP1, 2, 0, 0),
> + GATE(smmu_fimd1, "smmu_fimd1", "none", GATE_IP_DISP1, 8, 0, 0),
> +
> + GATE(smmu_fimc_isp, "smmu_fimc_isp", "none", GATE_IP_ISP0, 8, 0, 0),
> + GATE(smmu_fimc_drc, "smmu_fimc_drc", "none", GATE_IP_ISP0, 9, 0, 0),
> + GATE(smmu_fimc_fd, "smmu_fimc_fd", "none", GATE_IP_ISP0, 10, 0, 0),
> + GATE(smmu_fimc_scc, "smmu_fimc_scc", "none",
> + GATE_IP_ISP0, 11, 0, 0),
> + GATE(smmu_fimc_scp, "smmu_fimc_scp", "none",
> + GATE_IP_ISP0, 12, 0, 0),
> + GATE(smmu_fimc_mcuctl, "smmu_fimc_mcuctl", "none",
> + GATE_IP_ISP0, 13, 0, 0),
> + GATE(smmu_fimc_odc, "smmu_fimc_odc", "none", GATE_IP_ISP1, 4, 0, 0),
> + GATE(smmu_fimc_dis0, "smmu_fimc_dis0", "none",
> + GATE_IP_ISP1, 5, 0, 0),
> + GATE(smmu_fimc_dis1, "smmu_fimc_dis1", "none",
> + GATE_IP_ISP1, 6, 0, 0),
> + GATE(smmu_fimc_3dnr, "smmu_fimc_3dnr", "none",
> + GATE_IP_ISP1, 7, 0, 0),
> +
> + GATE(smmu_2d, "smmu_2d", "none", GATE_IP_ACP, 7, 0, 0),
> };
>
> static __initdata struct of_device_id ext_clk_match[] = {
> --
> 1.7.2.5
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2013-07-26 20:01 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 11:27 [PATCH v8 05/12] clk: exynos5250: add gate clock descriptions of System MMU Cho KyongHo
2013-07-26 11:27 ` Cho KyongHo
2013-07-26 20:01 ` Mike Turquette [this message]
2013-07-26 20:01 ` Mike Turquette
2013-07-27 9:08 ` Cho KyongHo
2013-07-27 9:08 ` Cho KyongHo
2013-07-27 9:08 ` Cho KyongHo
2013-07-30 6:46 ` Mike Turquette
2013-07-30 6:46 ` Mike Turquette
2013-07-30 11:17 ` Cho KyongHo
2013-07-30 11:17 ` Cho KyongHo
2013-08-01 10:21 ` Rahul Sharma
2013-08-01 10:21 ` Rahul Sharma
2013-08-01 12:50 ` Cho KyongHo
2013-08-01 12:50 ` Cho KyongHo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130726200107.7598.82010@quantum \
--to=mturquette@linaro.org \
--cc=a.motakis@virtualopensystems.com \
--cc=grundler@chromium.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=keyyoung.park@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=khw0178.kim@samsung.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=prathyush.k@samsung.com \
--cc=pullip.cho@samsung.com \
--cc=rahul.sharma@samsung.com \
--cc=sachin.kamat@linaro.org \
--cc=supash.ramaswamy@linaro.org \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.