From: Mike Turquette <mturquette@linaro.org>
To: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org, kgene.kim@samsung.com,
sachin.kamat@linaro.org, patches@linaro.org,
inki.dae@samsung.com
Subject: Re: [PATCH 1/3] clk: exynos5250: Add G2D gate clock
Date: Fri, 26 Jul 2013 13:18:00 -0700 [thread overview]
Message-ID: <20130726201800.7598.54329@quantum> (raw)
In-Reply-To: <1373013749-14530-1-git-send-email-sachin.kamat@linaro.org>
Quoting Sachin Kamat (2013-07-05 01:42:27)
> Adds gate clock for G2D IP for Exynos5250 SoC.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Cc: Mike Turquette <mturquette@linaro.org>
I've taken patch #1 into clk-next.
> ---
> This patch depends on the following patch:
> http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20581
I think I've gotten all three series you sent out, can you confirm?
http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20581
http://comments.gmane.org/gmane.linux.kernel.samsung-soc/20829
http://comments.gmane.org/gmane.linux.kernel.samsung-soc/20582
Regards,
Mike
> ---
> .../devicetree/bindings/clock/exynos5250-clock.txt | 1 +
> drivers/clk/samsung/clk-exynos5250.c | 5 ++++-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> index 1a05761..7e88242 100644
> --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> @@ -155,6 +155,7 @@ clock which they consume.
> dp 342
> mixer 343
> hdmi 344
> + g2d 345
>
> Example 1: An example of a clock controller node is listed below.
>
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index 6f767c5..3da0bdf 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -62,6 +62,7 @@
> #define SRC_CDREX 0x20200
> #define PLL_DIV2_SEL 0x20a24
> #define GATE_IP_DISP1 0x10928
> +#define GATE_IP_ACP 0x10000
>
> /*
> * Let each supported clock get a unique id. This id is used to lookup the clock
> @@ -99,7 +100,7 @@ enum exynos5250_clks {
> spi2, i2s1, i2s2, pcm1, pcm2, pwm, spdif, ac97, hsi2c0, hsi2c1, hsi2c2,
> hsi2c3, chipid, sysreg, pmu, cmu_top, cmu_core, cmu_mem, tzpc0, tzpc1,
> tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
> - wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
> + wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi, g2d,
>
> nr_clks,
> };
> @@ -152,6 +153,7 @@ static __initdata unsigned long exynos5250_clk_regs[] = {
> SRC_CDREX,
> PLL_DIV2_SEL,
> GATE_IP_DISP1,
> + GATE_IP_ACP,
> };
>
> /* list of all parent clock list */
> @@ -463,6 +465,7 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
> GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
> GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
> GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
> + GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
> };
>
> static __initdata struct of_device_id ext_clk_match[] = {
> --
> 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] clk: exynos5250: Add G2D gate clock
Date: Fri, 26 Jul 2013 13:18:00 -0700 [thread overview]
Message-ID: <20130726201800.7598.54329@quantum> (raw)
In-Reply-To: <1373013749-14530-1-git-send-email-sachin.kamat@linaro.org>
Quoting Sachin Kamat (2013-07-05 01:42:27)
> Adds gate clock for G2D IP for Exynos5250 SoC.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Cc: Mike Turquette <mturquette@linaro.org>
I've taken patch #1 into clk-next.
> ---
> This patch depends on the following patch:
> http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20581
I think I've gotten all three series you sent out, can you confirm?
http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20581
http://comments.gmane.org/gmane.linux.kernel.samsung-soc/20829
http://comments.gmane.org/gmane.linux.kernel.samsung-soc/20582
Regards,
Mike
> ---
> .../devicetree/bindings/clock/exynos5250-clock.txt | 1 +
> drivers/clk/samsung/clk-exynos5250.c | 5 ++++-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> index 1a05761..7e88242 100644
> --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> @@ -155,6 +155,7 @@ clock which they consume.
> dp 342
> mixer 343
> hdmi 344
> + g2d 345
>
> Example 1: An example of a clock controller node is listed below.
>
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index 6f767c5..3da0bdf 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -62,6 +62,7 @@
> #define SRC_CDREX 0x20200
> #define PLL_DIV2_SEL 0x20a24
> #define GATE_IP_DISP1 0x10928
> +#define GATE_IP_ACP 0x10000
>
> /*
> * Let each supported clock get a unique id. This id is used to lookup the clock
> @@ -99,7 +100,7 @@ enum exynos5250_clks {
> spi2, i2s1, i2s2, pcm1, pcm2, pwm, spdif, ac97, hsi2c0, hsi2c1, hsi2c2,
> hsi2c3, chipid, sysreg, pmu, cmu_top, cmu_core, cmu_mem, tzpc0, tzpc1,
> tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
> - wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
> + wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi, g2d,
>
> nr_clks,
> };
> @@ -152,6 +153,7 @@ static __initdata unsigned long exynos5250_clk_regs[] = {
> SRC_CDREX,
> PLL_DIV2_SEL,
> GATE_IP_DISP1,
> + GATE_IP_ACP,
> };
>
> /* list of all parent clock list */
> @@ -463,6 +465,7 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
> GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
> GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
> GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
> + GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
> };
>
> static __initdata struct of_device_id ext_clk_match[] = {
> --
> 1.7.9.5
next prev parent reply other threads:[~2013-07-26 20:18 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-05 8:42 [PATCH 1/3] clk: exynos5250: Add G2D gate clock Sachin Kamat
2013-07-05 8:42 ` Sachin Kamat
2013-07-05 8:42 ` [PATCH 2/3] of/documentation: Update G2D documentation Sachin Kamat
2013-07-05 8:42 ` Sachin Kamat
2013-07-05 23:52 ` Tomasz Figa
2013-07-05 23:52 ` Tomasz Figa
2013-07-08 6:36 ` Sachin Kamat
2013-07-08 6:36 ` Sachin Kamat
2013-07-05 8:42 ` [PATCH 3/3] ARM: EXYNOS: Add G2D support to exynos5250 Sachin Kamat
2013-07-05 8:42 ` Sachin Kamat
2013-07-31 5:52 ` Kukjin Kim
2013-07-31 5:52 ` Kukjin Kim
2013-07-26 8:48 ` [PATCH 1/3] clk: exynos5250: Add G2D gate clock Sachin Kamat
2013-07-26 8:48 ` Sachin Kamat
2013-07-26 20:18 ` Mike Turquette [this message]
2013-07-26 20:18 ` Mike Turquette
2013-07-27 13:29 ` Sachin Kamat
2013-07-27 13:29 ` Sachin Kamat
2013-07-30 6:48 ` Mike Turquette
2013-07-30 6:48 ` Mike Turquette
2013-07-30 6:55 ` Sachin Kamat
2013-07-30 6:55 ` Sachin Kamat
2013-07-31 3:42 ` Mike Turquette
2013-07-31 3:42 ` Mike Turquette
2013-07-31 3:48 ` Sachin Kamat
2013-07-31 3:48 ` Sachin Kamat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130726201800.7598.54329@quantum \
--to=mturquette@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=inki.dae@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=sachin.kamat@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.