All of lore.kernel.org
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/02] ARM: shmobile: Add r8a7790 SMP support using APMU code
Date: Fri, 09 Aug 2013 10:07:55 +0000	[thread overview]
Message-ID: <20130809100755.10827.10538.sendpatchset@w520> (raw)
In-Reply-To: <20130809100744.10827.62207.sendpatchset@w520>

From: Magnus Damm <damm@opensource.se>

Add r8a7790 SMP support using the shared APMU code. To enable
SMP the r8a7790 specific DTS needs to be updated to include
CPU cores, and this is happening in a separate patch.

Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/mach-shmobile/Makefile               |    1 
 arch/arm/mach-shmobile/include/mach/r8a7790.h |    1 
 arch/arm/mach-shmobile/setup-r8a7790.c        |    3 +
 arch/arm/mach-shmobile/smp-r8a7790.c          |   67 +++++++++++++++++++++++++
 4 files changed, 72 insertions(+)

--- 0011/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2013-08-07 20:10:54.000000000 +0900
@@ -35,6 +35,7 @@ smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_R8A73A4)	+= smp-r8a73a4.o platsmp-apmu.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7790)	+= smp-r8a7790.o platsmp-apmu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # IRQ objects
--- 0009/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ work/arch/arm/mach-shmobile/include/mach/r8a7790.h	2013-08-07 20:10:54.000000000 +0900
@@ -7,6 +7,7 @@ void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
 void r8a7790_init_early(void);
 void r8a7790_timer_init(void);
+extern struct smp_operations r8a7790_smp_ops;
 
 #define MD(nr) BIT(nr)
 u32 r8a7790_read_mode_pins(void);
--- 0009/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c	2013-08-07 20:10:54.000000000 +0900
@@ -272,6 +272,9 @@ void __init r8a7790_init_early(void)
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
 #endif
+#ifdef CONFIG_SMP
+	smp_set_ops(&r8a7790_smp_ops);
+#endif
 }
 
 #ifdef CONFIG_USE_OF
--- /dev/null
+++ work/arch/arm/mach-shmobile/smp-r8a7790.c	2013-08-07 20:10:55.000000000 +0900
@@ -0,0 +1,67 @@
+/*
+ * SMP support for r8a7790
+ *
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA7BAR		0x0030
+#define CA15RESCNT	0x0040
+#define CA7RESCNT	0x0044
+#define MERAM		0xe8080000
+
+static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* MERAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(MERAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (MERAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar, p + CA7BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA7BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+		       p + CA7RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7790_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};

WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/02] ARM: shmobile: Add r8a7790 SMP support using APMU code
Date: Fri, 09 Aug 2013 19:07:55 +0900	[thread overview]
Message-ID: <20130809100755.10827.10538.sendpatchset@w520> (raw)
In-Reply-To: <20130809100744.10827.62207.sendpatchset@w520>

From: Magnus Damm <damm@opensource.se>

Add r8a7790 SMP support using the shared APMU code. To enable
SMP the r8a7790 specific DTS needs to be updated to include
CPU cores, and this is happening in a separate patch.

Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/mach-shmobile/Makefile               |    1 
 arch/arm/mach-shmobile/include/mach/r8a7790.h |    1 
 arch/arm/mach-shmobile/setup-r8a7790.c        |    3 +
 arch/arm/mach-shmobile/smp-r8a7790.c          |   67 +++++++++++++++++++++++++
 4 files changed, 72 insertions(+)

--- 0011/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2013-08-07 20:10:54.000000000 +0900
@@ -35,6 +35,7 @@ smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_R8A73A4)	+= smp-r8a73a4.o platsmp-apmu.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7790)	+= smp-r8a7790.o platsmp-apmu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # IRQ objects
--- 0009/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ work/arch/arm/mach-shmobile/include/mach/r8a7790.h	2013-08-07 20:10:54.000000000 +0900
@@ -7,6 +7,7 @@ void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
 void r8a7790_init_early(void);
 void r8a7790_timer_init(void);
+extern struct smp_operations r8a7790_smp_ops;
 
 #define MD(nr) BIT(nr)
 u32 r8a7790_read_mode_pins(void);
--- 0009/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c	2013-08-07 20:10:54.000000000 +0900
@@ -272,6 +272,9 @@ void __init r8a7790_init_early(void)
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
 #endif
+#ifdef CONFIG_SMP
+	smp_set_ops(&r8a7790_smp_ops);
+#endif
 }
 
 #ifdef CONFIG_USE_OF
--- /dev/null
+++ work/arch/arm/mach-shmobile/smp-r8a7790.c	2013-08-07 20:10:55.000000000 +0900
@@ -0,0 +1,67 @@
+/*
+ * SMP support for r8a7790
+ *
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA7BAR		0x0030
+#define CA15RESCNT	0x0040
+#define CA7RESCNT	0x0044
+#define MERAM		0xe8080000
+
+static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* MERAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(MERAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (MERAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar, p + CA7BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA7BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+		       p + CA7RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7790_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};

  reply	other threads:[~2013-08-09 10:07 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-07 22:55 [PATCH 00/02] ARM: shmobile: Initial r8a73a4 APMU SMP code Magnus Damm
2013-08-07 22:55 ` Magnus Damm
2013-08-07 22:55 ` [PATCH 01/02] ARM: shmobile: Add r8a73a4 SMP support using APMU code Magnus Damm
2013-08-07 22:55   ` Magnus Damm
2013-08-08  5:52   ` Magnus Damm
2013-08-08  5:52     ` Magnus Damm
2013-08-21  8:57     ` Simon Horman
2013-08-21  8:57       ` Simon Horman
2013-08-22  5:48       ` Olof Johansson
2013-08-22  5:48         ` Olof Johansson
2013-08-22  6:34         ` Simon Horman
2013-08-22  6:34           ` Simon Horman
2013-08-28  6:26         ` Magnus Damm
2013-08-28  6:26           ` Magnus Damm
2013-08-28 18:16           ` Olof Johansson
2013-08-28 18:16             ` Olof Johansson
2013-08-29  4:37             ` Magnus Damm
2013-08-29  4:37               ` Magnus Damm
2013-08-22 14:54   ` Sudeep KarkadaNagesha
2013-08-22 14:54     ` Sudeep KarkadaNagesha
2013-08-28  6:13     ` Magnus Damm
2013-08-28  6:13       ` Magnus Damm
2013-08-28 13:12       ` Sudeep KarkadaNagesha
2013-08-28 13:12         ` Sudeep KarkadaNagesha
2013-08-07 22:55 ` [PATCH 02/02] ARM: shmobile: Add r8a73a4 CA15 CPU cores and APMU as DTS Magnus Damm
2013-08-07 22:55   ` Magnus Damm
2013-08-09 10:07 ` [PATCH 00/02] ARM: shmobile: Initial r8a7790 APMU SMP code Magnus Damm
2013-08-09 10:07   ` Magnus Damm
2013-08-09 10:07   ` Magnus Damm [this message]
2013-08-09 10:07     ` [PATCH 01/02] ARM: shmobile: Add r8a7790 SMP support using APMU code Magnus Damm
2013-08-21  9:14     ` Simon Horman
2013-08-21  9:14       ` Simon Horman
2013-08-09 10:08   ` [PATCH 02/02] ARM: shmobile: Add r8a7790 CA15 CPU cores and APMU as DTS Magnus Damm
2013-08-09 10:08     ` Magnus Damm
2013-08-09 15:31 ` [PATCH 00/02] ARM: shmobile: Initial r8a73a4 APMU SMP code Guennadi Liakhovetski
2013-08-09 15:31   ` Guennadi Liakhovetski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130809100755.10827.10538.sendpatchset@w520 \
    --to=magnus.damm@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.