* [PATCH 0/6] ARM: sunxi: DTSI cleanups
@ 2013-08-04 9:33 ` Maxime Ripard
0 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:33 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-kernel, Maxime Ripard
Hi everyone,
This small patchset removes the useless reg property in the soc bus that is not
required for the simple-bus we're using.
It also fixes the base address of this bus in the node name that was wrong from
the start.
Maxime
Maxime Ripard (6):
ARM: sun4i: a10: Remove useless simple-bus reg property
ARM: sun4i: dt: Fix A10 SoC bus base address
ARM: sun5i: a10s: Remove useless simple-bus reg property
ARM: sun5i: dt: Fix A10s SoC bus base address
ARM: sun5i: a13: Remove useless simple-bus reg property
ARM: sun5i: dt: Fix A13 SoC bus base address
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 3 +--
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s.dtsi | 3 +--
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 2 +-
arch/arm/boot/dts/sun5i-a13.dtsi | 3 +--
8 files changed, 8 insertions(+), 11 deletions(-)
--
1.8.3.4
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/6] ARM: sun4i: a10: Remove useless simple-bus reg property
2013-08-04 9:33 ` Maxime Ripard
@ 2013-08-04 9:33 ` Maxime Ripard
-1 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:33 UTC (permalink / raw)
To: linux-arm-kernel
The reg property of the simple-bus driver is completely useless. Remove
it from the DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index b2bd6e1..3ed2e1e 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -164,7 +164,6 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x01c20000 0x300000>;
ranges;
emac: ethernet at 01c0b000 {
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/6] ARM: sun4i: dt: Fix A10 SoC bus base address
2013-08-04 9:33 ` Maxime Ripard
@ 2013-08-04 9:34 ` Maxime Ripard
-1 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel
There was a typo in the base address used for the soc node in the A10
device tree. Fix it with the proper base address.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 4580b62..425a7db 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -26,7 +26,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc at 01c20000 {
+ soc at 01c00000 {
emac: ethernet at 01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 3514b37..b3ae51f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc at 01c20000 {
+ soc at 01c00000 {
emac: ethernet at 01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 078ed7f..0c1447c 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc at 01c20000 {
+ soc at 01c00000 {
uart0: serial at 01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 3ed2e1e..c32770a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -160,7 +160,7 @@
};
};
- soc at 01c20000 {
+ soc at 01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/6] ARM: sun4i: dt: Fix A10 SoC bus base address
@ 2013-08-04 9:34 ` Maxime Ripard
0 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-kernel, Maxime Ripard
There was a typo in the base address used for the soc node in the A10
device tree. Fix it with the proper base address.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 4580b62..425a7db 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -26,7 +26,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 3514b37..b3ae51f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 078ed7f..0c1447c 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 3ed2e1e..c32770a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -160,7 +160,7 @@
};
};
- soc@01c20000 {
+ soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/6] ARM: sun5i: a10s: Remove useless simple-bus reg property
2013-08-04 9:33 ` Maxime Ripard
@ 2013-08-04 9:34 ` Maxime Ripard
-1 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel
The reg property of the simple-bus driver is completely useless. Remove
it from the DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 0f0881a..ec6c2b6 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -161,7 +161,6 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x01c20000 0x300000>;
ranges;
emac: ethernet at 01c0b000 {
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 4/6] ARM: sun5i: dt: Fix A10s SoC bus base address
2013-08-04 9:33 ` Maxime Ripard
@ 2013-08-04 9:34 ` Maxime Ripard
-1 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel
There was a typo in the base address used for the soc node in the A10s
device tree. Fix it with the proper base address.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 24dd8bb..3c9f8b3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -18,7 +18,7 @@
model = "Olimex A10s-Olinuxino Micro";
compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
- soc at 01c20000 {
+ soc at 01c00000 {
emac: ethernet at 01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index ec6c2b6..ee0ff9b 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -157,7 +157,7 @@
};
};
- soc at 01c20000 {
+ soc at 01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 4/6] ARM: sun5i: dt: Fix A10s SoC bus base address
@ 2013-08-04 9:34 ` Maxime Ripard
0 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-kernel, Maxime Ripard
There was a typo in the base address used for the soc node in the A10s
device tree. Fix it with the proper base address.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 24dd8bb..3c9f8b3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -18,7 +18,7 @@
model = "Olimex A10s-Olinuxino Micro";
compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
- soc@01c20000 {
+ soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index ec6c2b6..ee0ff9b 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -157,7 +157,7 @@
};
};
- soc@01c20000 {
+ soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 5/6] ARM: sun5i: a13: Remove useless simple-bus reg property
2013-08-04 9:33 ` Maxime Ripard
@ 2013-08-04 9:34 ` Maxime Ripard
-1 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel
The reg property of the simple-bus driver is completely useless. Remove
it from the DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a13.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 7363211..9d5ad20 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -154,7 +154,6 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x01c20000 0x300000>;
ranges;
intc: interrupt-controller at 01c20400 {
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 6/6] ARM: sun5i: dt: Fix A13 SoC bus base address
2013-08-04 9:33 ` Maxime Ripard
@ 2013-08-04 9:34 ` Maxime Ripard
-1 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel
There was a typo in the base address used for the soc node in the A13
device tree. Fix it with the proper base address.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 2 +-
arch/arm/boot/dts/sun5i-a13.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 80497e3..9e508dc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc at 01c20000 {
+ soc at 01c00000 {
pinctrl at 01c20800 {
led_pins_olinuxino: led_pins at 0 {
allwinner,pins = "PG9";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 9d5ad20..f6091dc 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -150,7 +150,7 @@
};
};
- soc at 01c20000 {
+ soc at 01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 6/6] ARM: sun5i: dt: Fix A13 SoC bus base address
@ 2013-08-04 9:34 ` Maxime Ripard
0 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-04 9:34 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-kernel, Maxime Ripard
There was a typo in the base address used for the soc node in the A13
device tree. Fix it with the proper base address.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 2 +-
arch/arm/boot/dts/sun5i-a13.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 80497e3..9e508dc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 9d5ad20..f6091dc 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -150,7 +150,7 @@
};
};
- soc@01c20000 {
+ soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
1.8.3.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 0/6] ARM: sunxi: DTSI cleanups
2013-08-04 9:33 ` Maxime Ripard
@ 2013-08-10 17:19 ` Maxime Ripard
-1 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-10 17:19 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Aug 04, 2013 at 11:33:58AM +0200, Maxime Ripard wrote:
> Hi everyone,
>
> This small patchset removes the useless reg property in the soc bus that is not
> required for the simple-bus we're using.
>
> It also fixes the base address of this bus in the node name that was wrong from
> the start.
>
> Maxime
>
> Maxime Ripard (6):
> ARM: sun4i: a10: Remove useless simple-bus reg property
> ARM: sun4i: dt: Fix A10 SoC bus base address
> ARM: sun5i: a10s: Remove useless simple-bus reg property
> ARM: sun5i: dt: Fix A10s SoC bus base address
> ARM: sun5i: a13: Remove useless simple-bus reg property
> ARM: sun5i: dt: Fix A13 SoC bus base address
>
> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
> arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
> arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 2 +-
> arch/arm/boot/dts/sun4i-a10.dtsi | 3 +--
> arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
> arch/arm/boot/dts/sun5i-a10s.dtsi | 3 +--
> arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 2 +-
> arch/arm/boot/dts/sun5i-a13.dtsi | 3 +--
> 8 files changed, 8 insertions(+), 11 deletions(-)
Applied to my sunxi/dt-for-3.12 branch.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130810/3f7152c9/attachment.sig>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] ARM: sunxi: DTSI cleanups
@ 2013-08-10 17:19 ` Maxime Ripard
0 siblings, 0 replies; 16+ messages in thread
From: Maxime Ripard @ 2013-08-10 17:19 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1394 bytes --]
On Sun, Aug 04, 2013 at 11:33:58AM +0200, Maxime Ripard wrote:
> Hi everyone,
>
> This small patchset removes the useless reg property in the soc bus that is not
> required for the simple-bus we're using.
>
> It also fixes the base address of this bus in the node name that was wrong from
> the start.
>
> Maxime
>
> Maxime Ripard (6):
> ARM: sun4i: a10: Remove useless simple-bus reg property
> ARM: sun4i: dt: Fix A10 SoC bus base address
> ARM: sun5i: a10s: Remove useless simple-bus reg property
> ARM: sun5i: dt: Fix A10s SoC bus base address
> ARM: sun5i: a13: Remove useless simple-bus reg property
> ARM: sun5i: dt: Fix A13 SoC bus base address
>
> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
> arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
> arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 2 +-
> arch/arm/boot/dts/sun4i-a10.dtsi | 3 +--
> arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
> arch/arm/boot/dts/sun5i-a10s.dtsi | 3 +--
> arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 2 +-
> arch/arm/boot/dts/sun5i-a13.dtsi | 3 +--
> 8 files changed, 8 insertions(+), 11 deletions(-)
Applied to my sunxi/dt-for-3.12 branch.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread