All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stanislaw Gruszka <sgruszka@redhat.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] mac80211: remove IEEE80211_STA_BEACON_POLL
Date: Fri, 23 Aug 2013 08:52:12 +0200	[thread overview]
Message-ID: <20130823065200.GA3835@redhat.com> (raw)

When we detect beacon lost we do active AP probing (using nullfunc
frame or probe request), there is no need to have beacon polling. Flag
IEEE80211_STA_BEACON_POLL seems to be used just for historical reasons.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 net/mac80211/ieee80211_i.h |    1 -
 net/mac80211/mlme.c        |   38 +++++++++-----------------------------
 net/mac80211/scan.c        |    3 +--
 3 files changed, 10 insertions(+), 32 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index b618651..d353c64 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -322,7 +322,6 @@ struct ieee80211_roc_work {
 
 /* flags used in struct ieee80211_if_managed.flags */
 enum ieee80211_sta_flags {
-	IEEE80211_STA_BEACON_POLL	= BIT(0),
 	IEEE80211_STA_CONNECTION_POLL	= BIT(1),
 	IEEE80211_STA_CONTROL_PORT	= BIT(2),
 	IEEE80211_STA_DISABLE_HT	= BIT(4),
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 2aab130..23694b7 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -893,8 +893,7 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local,
 	if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
 
-	if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
-			    IEEE80211_STA_CONNECTION_POLL))
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
 
 	ieee80211_tx_skb(sdata, skb);
@@ -1374,8 +1373,7 @@ static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
 	if (!mgd->associated)
 		return false;
 
-	if (mgd->flags & (IEEE80211_STA_BEACON_POLL |
-			  IEEE80211_STA_CONNECTION_POLL))
+	if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
 		return false;
 
 	if (!mgd->have_beacon)
@@ -1691,8 +1689,7 @@ static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
 {
 	lockdep_assert_held(&sdata->local->mtx);
 
-	sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
-				IEEE80211_STA_BEACON_POLL);
+	sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
 	ieee80211_run_deferred_scan(sdata->local);
 }
 
@@ -1954,11 +1951,8 @@ static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_local *local = sdata->local;
 
 	mutex_lock(&local->mtx);
-	if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
-			      IEEE80211_STA_CONNECTION_POLL))) {
-		mutex_unlock(&local->mtx);
-		return;
-	}
+	if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
+		goto out;
 
 	__ieee80211_stop_poll(sdata);
 
@@ -2094,15 +2088,9 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
 	 * because otherwise we would reset the timer every time and
 	 * never check whether we received a probe response!
 	 */
-	if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
-			    IEEE80211_STA_CONNECTION_POLL))
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
 		already = true;
 
-	if (beacon)
-		ifmgd->flags |= IEEE80211_STA_BEACON_POLL;
-	else
-		ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
-
 	mutex_unlock(&sdata->local->mtx);
 
 	if (already)
@@ -3069,17 +3057,10 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
-	if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
 		mlme_dbg_ratelimited(sdata,
 				     "cancelling AP probe due to a received beacon\n");
-		mutex_lock(&local->mtx);
-		ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
-		ieee80211_run_deferred_scan(local);
-		mutex_unlock(&local->mtx);
-
-		mutex_lock(&local->iflist_mtx);
-		ieee80211_recalc_ps(local, -1);
-		mutex_unlock(&local->iflist_mtx);
+		ieee80211_reset_ap_probe(sdata);
 	}
 
 	/*
@@ -3548,8 +3529,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
 	} else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
 		run_again(sdata, ifmgd->assoc_data->timeout);
 
-	if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
-			    IEEE80211_STA_CONNECTION_POLL) &&
+	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
 	    ifmgd->associated) {
 		u8 bssid[ETH_ALEN];
 		int max_tries;
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 08afe74..ecb57b0 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -391,8 +391,7 @@ static bool ieee80211_can_scan(struct ieee80211_local *local,
 		return false;
 
 	if (sdata->vif.type == NL80211_IFTYPE_STATION &&
-	    sdata->u.mgd.flags & (IEEE80211_STA_BEACON_POLL |
-				  IEEE80211_STA_CONNECTION_POLL))
+	    sdata->u.mgd.flags & IEEE80211_STA_CONNECTION_POLL)
 		return false;
 
 	return true;
-- 
1.7.1


             reply	other threads:[~2013-08-23  6:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-23  6:52 Stanislaw Gruszka [this message]
2013-08-23 13:24 ` [PATCH] mac80211: remove IEEE80211_STA_BEACON_POLL Johannes Berg
2013-08-27  9:36   ` [PATCH v2] mac80211: change beacon/connection polling Stanislaw Gruszka
2013-08-30 10:04     ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130823065200.GA3835@redhat.com \
    --to=sgruszka@redhat.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.