From: Stanislaw Gruszka <sgruszka@redhat.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v2] mac80211: change beacon/connection polling
Date: Tue, 27 Aug 2013 11:36:35 +0200 [thread overview]
Message-ID: <20130827093635.GD5548@redhat.com> (raw)
In-Reply-To: <1377264280.14021.29.camel@jlt4.sipsolutions.net>
Since when we detect baecon lost we do active AP probing (using nullfunc
frame or probe request) there is no need to have beacon polling. Flags
IEEE80211_STA_BEACON_POLL seems to be used just for historical reasons.
Change also make that after we start connection poll due to beacon loss,
next received beacon will abort the poll.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
v1 -> v2 correct subject and changelog
net/mac80211/ieee80211_i.h | 1 -
net/mac80211/mlme.c | 38 +++++++++-----------------------------
net/mac80211/scan.c | 3 +--
3 files changed, 10 insertions(+), 32 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index b618651..d353c64 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -322,7 +322,6 @@ struct ieee80211_roc_work {
/* flags used in struct ieee80211_if_managed.flags */
enum ieee80211_sta_flags {
- IEEE80211_STA_BEACON_POLL = BIT(0),
IEEE80211_STA_CONNECTION_POLL = BIT(1),
IEEE80211_STA_CONTROL_PORT = BIT(2),
IEEE80211_STA_DISABLE_HT = BIT(4),
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 2aab130..23694b7 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -893,8 +893,7 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local,
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
- if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL))
+ if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
ieee80211_tx_skb(sdata, skb);
@@ -1374,8 +1373,7 @@ static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
if (!mgd->associated)
return false;
- if (mgd->flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL))
+ if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
return false;
if (!mgd->have_beacon)
@@ -1691,8 +1689,7 @@ static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
{
lockdep_assert_held(&sdata->local->mtx);
- sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
ieee80211_run_deferred_scan(sdata->local);
}
@@ -1954,11 +1951,8 @@ static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
struct ieee80211_local *local = sdata->local;
mutex_lock(&local->mtx);
- if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL))) {
- mutex_unlock(&local->mtx);
- return;
- }
+ if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
+ goto out;
__ieee80211_stop_poll(sdata);
@@ -2094,15 +2088,9 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
* because otherwise we would reset the timer every time and
* never check whether we received a probe response!
*/
- if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL))
+ if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
already = true;
- if (beacon)
- ifmgd->flags |= IEEE80211_STA_BEACON_POLL;
- else
- ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
-
mutex_unlock(&sdata->local->mtx);
if (already)
@@ -3069,17 +3057,10 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
}
}
- if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
+ if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
mlme_dbg_ratelimited(sdata,
"cancelling AP probe due to a received beacon\n");
- mutex_lock(&local->mtx);
- ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
- ieee80211_run_deferred_scan(local);
- mutex_unlock(&local->mtx);
-
- mutex_lock(&local->iflist_mtx);
- ieee80211_recalc_ps(local, -1);
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_reset_ap_probe(sdata);
}
/*
@@ -3548,8 +3529,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
} else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
run_again(sdata, ifmgd->assoc_data->timeout);
- if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL) &&
+ if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
ifmgd->associated) {
u8 bssid[ETH_ALEN];
int max_tries;
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 08afe74..ecb57b0 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -391,8 +391,7 @@ static bool ieee80211_can_scan(struct ieee80211_local *local,
return false;
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- sdata->u.mgd.flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL))
+ sdata->u.mgd.flags & IEEE80211_STA_CONNECTION_POLL)
return false;
return true;
--
1.7.1
next prev parent reply other threads:[~2013-08-27 9:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 6:52 [PATCH] mac80211: remove IEEE80211_STA_BEACON_POLL Stanislaw Gruszka
2013-08-23 13:24 ` Johannes Berg
2013-08-27 9:36 ` Stanislaw Gruszka [this message]
2013-08-30 10:04 ` [PATCH v2] mac80211: change beacon/connection polling Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130827093635.GD5548@redhat.com \
--to=sgruszka@redhat.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.