From: Tobias Waldekranz <tobias@waldekranz.com>
To: Bing Zhao <bzhao@marvell.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: sd8787 (mwifiex) on big endian system
Date: Tue, 27 Aug 2013 08:17:45 +0200 [thread overview]
Message-ID: <20130827061745.GA19431@gmail.com> (raw)
In-Reply-To: <477F20668A386D41ADCC57781B1F70430EAF1FEDA0@SC-VEXCH1.marvell.com>
On Mon, Aug 26, 2013 at 12:16:00PM -0700, Bing Zhao wrote:
> Hi Tobias,
>
> > As the subject suggests, I am trying to use the SD8787 on a PPC
> > system. I have found a few endian related issues (submitted a few
> > hours ago), but it is still not working.
> >
> > So my first question, has anyone successfully used an mwifiex device
> > on a big endian system?
>
> AFAIK, you are probably the first one to try on a big endian system ;)
>
> >
> > Also, I have found that the chip seems to signal interrupts before its
> > internal registers are in a consistent state. Specifically, the
> > sdio_ireg and wr_bitmask seems to be out of sync. Inserting a small
> > delay in mwifiex_interrupt_status (sdio.c), currently 50 us solves the
> > problem. Is there some bit that should be polled here to make sure that
> > the registers are in a consistent state?
>
> Can you enable dynamic debug and post the logs showing the register mismatch?
>
> Thanks,
> Bing
Hi Bing,
Here is the log output without the added udelay. It is always the 0xd9
command that fails, but not always with these sdio_ireg/wr_bitmask
values. I have seen these combinations:
- sdio_ireg incorrect(2), wr_bitmask incorrect(fffe)
- sdio_ireg correct(3), wr_bitmask incorrect(fffe)
- sdio_ireg incorrect(2), wr_bitmask correct(ffff)
Waiting 50 us before reading the mp_regs always returns the correct
response.
mmc0: new high speed SDIO card at address 0001
mwifiex_sdio: info: vendor=0x02DF device=0x9119 class=0 function=1
mwifiex_sdio: info: SDIO FUNC1 IO port: 0x10000
mwifiex_sdio mmc0:0001:1: info: downloading FW image (447384 bytes)
mwifiex_sdio mmc0:0001:1: info: FW download over, size 447384 bytes
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xa9, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1035334.499952): 0xa9, act 0x0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=12
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1035334.645688): 0x80a9, result 0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xa9, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x3, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1035334.645742): 0x3, act 0x0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=75
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1035334.664109): 0x8003, result 0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: fw_release_number- 0x600e4209
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: permanent addr: 00:06:c6:37:45:28
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: hw_if_version=0x2 version=0x41
mwifiex_sdio mmc0:0001:1: cmd: mp_end_port 16, data port mask 0xfffe
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x3, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: set tx_buf=2048
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd9, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1035334.664215): 0xd9, act 0x1, len 16, seqno 0x3
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x2
mwifiex_sdio mmc0:0001:1: int: DNLD: wr_bitmap=0xfffe
mwifiex_sdio mmc0:0001:1: info: <--- Tx DONE Interrupt --->
mwifiex_sdio mmc0:0001:1: info: cmd_sent=1 data_sent=0
mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id (1035344.696670) = 0xd9, act = 0x1
mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_timeout = 1
mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
mwifiex_sdio mmc0:0001:1: last_cmd_index = 3
mwifiex_sdio mmc0:0001:1: last_cmd_id: 00 00 00 a9 00 03 00 d9 00 00
mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 00 00 00 00 00 00 01 00 00
mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 2
mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: 00 00 80 a9 80 03 00 00 00 00
mwifiex_sdio mmc0:0001:1: last_event_index = 0
mwifiex_sdio mmc0:0001:1: last_event: 00 00 00 00 00 00 00 00 00 00
mwifiex_sdio mmc0:0001:1: data_sent=0 cmd_sent=1
mwifiex_sdio mmc0:0001:1: ps_mode=0 ps_state=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd9, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd completed: status=-110
mwifiex_sdio mmc0:0001:1: cmd timeout
mwifiex_sdio: Resetting card...
mwifiex_sdio: info: SDIO func num=1
mwifiex_sdio mmc0:0001:1: cmd: calling mwifiex_shutdown_drv...
mwifiex_sdio mmc0:0001:1: info: shutdown mwifiex...
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 1
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 2
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 3
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 4
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 5
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 6
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 7
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 0, head = dea340d0
mwifiex_sdio mmc0:0001:1: info: Delete node c79be1a0, next = c79be1b0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 1, head = dea340e0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 2, head = dea340f0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 1
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 2
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 3
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 4
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 5
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 6
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 7
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 0, head = dea340d0
mwifiex_sdio mmc0:0001:1: info: Delete node c79be1b0, next = c79be1c0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 1, head = dea340e0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 2, head = dea340f0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 1
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 2
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 3
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 4
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 5
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 6
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 7
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 0, head = dea340d0
mwifiex_sdio mmc0:0001:1: info: Delete node c79be1c0, next = dea340d0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 1, head = dea340e0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 2, head = dea340f0
mwifiex_sdio mmc0:0001:1: info: free cmd buffer
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 0
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 1
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 2
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 3
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 4
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 5
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 6
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 7
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 8
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 9
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 10
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 11
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 12
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 13
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 14
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 15
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 16
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 17
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 18
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 19
mwifiex_sdio mmc0:0001:1: cmd: free cmd pool
mwifiex_sdio mmc0:0001:1: info: free scan table
mwifiex_sdio mmc0:0001:1: cmd: mwifiex_shutdown_drv done
WARNING: driver mwifiex_sdio did not remove its interrupt handler!
mmc0: card 0001 removed
mmc0: new high speed SDIO card at address 0001
mwifiex_sdio: info: vendor=0x02DF device=0x9119 class=0 function=1
mwifiex_sdio: info: SDIO FUNC1 IO port: 0x10000
mwifiex_sdio mmc0:0001:1: info: downloading FW image (447384 bytes)
mwifiex_sdio mmc0:0001:1: poll card status failed, tries = 100
mwifiex_sdio mmc0:0001:1: FW download with helper: poll status timeout @ 0
mwifiex_sdio mmc0:0001:1: prog_fw failed ret=0xffffffff
Thanks
- wkz
next prev parent reply other threads:[~2013-08-27 6:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-26 10:27 sd8787 (mwifiex) on big endian system Tobias Waldekranz
2013-08-26 19:16 ` Bing Zhao
2013-08-27 6:17 ` Tobias Waldekranz [this message]
2013-08-27 23:42 ` Bing Zhao
2013-08-28 11:52 ` Tobias Waldekranz
2013-08-29 0:00 ` Bing Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130827061745.GA19431@gmail.com \
--to=tobias@waldekranz.com \
--cc=bzhao@marvell.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.