Re: sd8787 (mwifiex) on big endian system

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Tobias Waldekranz <tobias@waldekranz.com>
To: Bing Zhao <bzhao@marvell.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: sd8787 (mwifiex) on big endian system
Date: Wed, 28 Aug 2013 13:52:51 +0200	[thread overview]
Message-ID: <20130828115251.GA3504@gmail.com> (raw)
In-Reply-To: <477F20668A386D41ADCC57781B1F70430EAF1FF23F@SC-VEXCH1.marvell.com>

On Tue, Aug 27, 2013 at 04:42:37PM -0700, Bing Zhao wrote:
> Hi Tobias,
> 
> > Hi Bing,
> > 
> > Here is the log output without the added udelay. It is always the 0xd9
> > command that fails, but not always with these sdio_ireg/wr_bitmask
> > values. I have seen these combinations:
> > 
> >  - sdio_ireg incorrect(2), wr_bitmask incorrect(fffe)
> >  - sdio_ireg   correct(3), wr_bitmask incorrect(fffe)
> >  - sdio_ireg incorrect(2), wr_bitmask   correct(ffff)
> > 
> > Waiting 50 us before reading the mp_regs always returns the correct
> > response.
> 
> Thanks for the logs.
> 
> Could you try the following change to bypass 0xd9 command?
> 
> diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifi
> index c0268b5..3cecc86 100644
> --- a/drivers/net/wireless/mwifiex/sta_cmd.c
> +++ b/drivers/net/wireless/mwifiex/sta_cmd.c
> @@ -1541,6 +1541,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8
>                 if (ret)
>                         return -1;
> 
> +#if 0
>                 /* Reconfigure tx buf size */
>                 ret = mwifiex_send_cmd_sync(priv,
>                                             HostCmd_CMD_RECONFIGURE_TX_BUFF,
> @@ -1548,6 +1549,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8
>                                             &priv->adapter->tx_buf_size);
>                 if (ret)
>                         return -1;
> +#endif
> 
>                 if (priv->bss_type != MWIFIEX_BSS_TYPE_UAP) {
>                         /* Enable IEEE PS by default */
> 
> Thanks,
> Bing
> 

Hi,

Here is the log:

mmc0: new high speed SDIO card at address 0001
mwifiex_sdio: info: vendor=0x02DF device=0x9119 class=0 function=1
mwifiex_sdio: info: SDIO FUNC1 IO port: 0x10000
mwifiex_sdio mmc0:0001:1: info: downloading FW image (447384 bytes)
mwifiex_sdio mmc0:0001:1: info: FW download over, size 447384 bytes
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xa9, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141981.833590): 0xa9, act 0x0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=12
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141981.989543): 0x80a9, result 0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xa9, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x3, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141981.989581): 0x3, act 0x0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=75
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.7678): 0x8003, result 0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: fw_release_number- 0x600e4209
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: permanent addr: 00:06:c6:37:45:28
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: hw_if_version=0x2 version=0x41
mwifiex_sdio mmc0:0001:1: cmd: mp_end_port 16, data port mask 0xfffe
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x3, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: PS Command: Enter PS
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xe4, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.7772): 0xe4, act 0xff, len 30, seqno 0x3
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=34
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.37680): 0x80e4, result 0, len 30, seqno 0x3
mwifiex_sdio mmc0:0001:1: info: mwifiex_ret_enh_power_mode: PS_MODE cmd reply result=0x0 action=0XFF
mwifiex_sdio mmc0:0001:1: cmd: Enabled STA power save
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xe4, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd6, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.37730): 0xd6, act 0x0, len 44, seqno 0x4
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=804
mwifiex_sdio mmc0:0001:1: info: rx_len = 1024 skb->len = 1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 1024
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.58031): 0x80d6, result 0, len 800, seqno 0x4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd6, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x1e, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.58065): 0x1e, act 0x0, len 14, seqno 0x5
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.77665): 0x801e, result 0, len 14, seqno 0x5
mwifiex_sdio mmc0:0001:1: Current TxPower Level=0, Max Power=18, Min Power=4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x1e, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.77706): 0x83, act 0x1, len 24, seqno 0x6
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x83, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=28
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.97644): 0x8083, result 0, len 24, seqno 0x6
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x83, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.97677): 0xdf, act 0x1, len 14, seqno 0x7
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xdf, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.117648): 0x80df, result 0, len 14, seqno 0x7
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xdf, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.117679): 0x28, act 0x13, len 12, seqno 0x8
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.137678): 0x8028, result 0, len 12, seqno 0x8
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: PS Command: Enter Auto Deep Sleep
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xe4, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.137743): 0xe4, act 0xff, len 18, seqno 0x9
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=22
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.157687): 0x80e4, result 0, len 18, seqno 0x9
mwifiex_sdio mmc0:0001:1: info: mwifiex_ret_enh_power_mode: PS_MODE cmd reply result=0x0 action=0XFF
mwifiex_sdio mmc0:0001:1: cmd: Enabled auto deep sleep
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xe4, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: cmd_oid = 0x9
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: Action=0x1, OID=0x9, OIDSize=0x2, Value=0x0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x16, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.157781): 0x16, act 0x1, len 16, seqno 0xa
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.177667): 0x8016, result 0, len 16, seqno 0xa
mwifiex_sdio mmc0:0001:1: info: SNMP_RESP: oid value = 0x9, query_type = 0x1, buf size = 0x2
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x16, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xcd, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.177711): 0xcd, act 0x1, len 16, seqno 0xb
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.197711): 0x80cd, result 0, len 16, seqno 0xb
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xcd, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd6, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.197745): 0xd6, act 0x0, len 44, seqno 0xc
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=804
mwifiex_sdio mmc0:0001:1: info: rx_len = 1024 skb->len = 1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 1024
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.218053): 0x80d6, result 0, len 800, seqno 0xc
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd6, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x1e, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.218090): 0x1e, act 0x0, len 14, seqno 0xd
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.237678): 0x801e, result 0, len 14, seqno 0xd
mwifiex_sdio mmc0:0001:1: Current TxPower Level=0, Max Power=18, Min Power=4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x1e, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.237719): 0x83, act 0x1, len 24, seqno 0xe
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x83, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=28
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.257659): 0x8083, result 0, len 24, seqno 0xe
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x83, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xdf, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.257693): 0xdf, act 0x1, len 14, seqno 0xf
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.277659): 0x80df, result 0, len 14, seqno 0xf
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xdf, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.277690): 0x28, act 0x13, len 12, seqno 0x10
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.297670): 0x8028, result 0, len 12, seqno 0x10
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: cmd_oid = 0x9
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: Action=0x1, OID=0x9, OIDSize=0x2, Value=0x0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x16, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.297738): 0x16, act 0x1, len 16, seqno 0x11
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.317665): 0x8016, result 0, len 16, seqno 0x11
mwifiex_sdio mmc0:0001:1: info: SNMP_RESP: oid value = 0x9, query_type = 0x1, buf size = 0x2
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x16, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.317707): 0xcd, act 0x1, len 16, seqno 0x12
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xcd, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.318964): 0x80cd, result 0, len 16, seqno 0x12
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xcd, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd6, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.318993): 0xd6, act 0x0, len 44, seqno 0x13
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=804
mwifiex_sdio mmc0:0001:1: info: rx_len = 1024 skb->len = 1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 1024
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.319768): 0x80d6, result 0, len 800, seqno 0x13
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd6, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x1e, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.319828): 0x1e, act 0x0, len 14, seqno 0x14
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.320202): 0x801e, result 0, len 14, seqno 0x14
mwifiex_sdio mmc0:0001:1: Current TxPower Level=0, Max Power=18, Min Power=4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x1e, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.320240): 0x83, act 0x1, len 24, seqno 0x15
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x83, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=28
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.320593): 0x8083, result 0, len 24, seqno 0x15
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x83, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xdf, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.320647): 0xdf, act 0x1, len 14, seqno 0x16
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.321017): 0x80df, result 0, len 14, seqno 0x16
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xdf, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.321047): 0x28, act 0x13, len 12, seqno 0x17
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.321415): 0x8028, result 0, len 12, seqno 0x17
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: cmd_oid = 0x9
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: Action=0x1, OID=0x9, OIDSize=0x2, Value=0x0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x16, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.321482): 0x16, act 0x1, len 16, seqno 0x18
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.321850): 0x8016, result 0, len 16, seqno 0x18
mwifiex_sdio mmc0:0001:1: info: SNMP_RESP: oid value = 0x9, query_type = 0x1, buf size = 0x2
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x16, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.321888): 0xcd, act 0x1, len 16, seqno 0x19
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xcd, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.322259): 0x80cd, result 0, len 16, seqno 0x19
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xcd, cmd_pending=0
mwifiex_sdio mmc0:0001:1: ignoring F/W country code US
mwifiex_sdio mmc0:0001:1: info: mlan0: Marvell 802.11 Adapter
mwifiex_sdio mmc0:0001:1: info: uap0: Marvell 802.11 Adapter
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xeb, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.362104): 0xeb, act 0x1, len 12, seqno 0x201a
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.364515): 0x80eb, result 0, len 12, seqno 0x201a
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xeb, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xeb, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.364593): 0xeb, act 0x1, len 12, seqno 0x201b
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.366498): 0x80eb, result 0, len 12, seqno 0x201b
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xeb, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xeb, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.366578): 0xeb, act 0x1, len 12, seqno 0x201c
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.367029): 0x80eb, result 0, len 12, seqno 0x201c
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xeb, cmd_pending=0
mwifiex_sdio mmc0:0001:1: info: p2p0: Marvell 802.11 Adapter
mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (66.14.96.p9) 
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (66.14.96.p9) 
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=10
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Event ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: info: EVENT: SLEEP
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available


The driver seems to complete the initialization process. But if I now
launch hostapd, I get a timeout in another command (0xb1):

mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x10c, cmd_pending=1
mwifiex_sdio mmc0:0001:1: event: wakeup device...
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x10c, cmd_pending=2
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x3
mwifiex_sdio mmc0:0001:1: int: DNLD: wr_bitmap=0xffff
mwifiex_sdio mmc0:0001:1: info:  <--- Tx DONE Interrupt --->
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=10
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Event ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: info: EVENT: AWAKE
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.253127): 0x10c, act 0x1, len 14, seqno 0x101e
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: Enable Promiscuous mode
mwifiex_sdio mmc0:0001:1: info: old_pkt_filter=0x13, curr_pkt_filter=0x93
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=3
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: Enable Promiscuous mode
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: old_pkt_filter=0x93, curr_pkt_filter=0x93
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: info: Enable Promiscuous mode
mwifiex_sdio mmc0:0001:1: info: old_pkt_filter=0x93, curr_pkt_filter=0x93
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.253760): 0x810c, result 0, len 14, seqno 0x101e
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x10c, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.253789): 0x10c, act 0x1, len 14, seqno 0x101f
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.254157): 0x810c, result 0, len 14, seqno 0x101f
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x10c, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.254180): 0x28, act 0x93, len 12, seqno 0x1020
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.255185): 0x8028, result 0, len 12, seqno 0x1021
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.257267): 0x28, act 0x93, len 12, seqno 0x1022
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.257653): 0x8028, result 0, len 12, seqno 0x1022
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.257859): 0x28, act 0x93, len 12, seqno 0x1023
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.258220): 0x8028, result 0, len 12, seqno 0x1023
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.258392): 0x28, act 0x93, len 12, seqno 0x1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.258745): 0x8028, result 0, len 12, seqno 0x1024
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: info: 11D: no_of_triplet=0x1
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x5b, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xb2, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.259117): 0x5b, act 0x1, len 20, seqno 0x25
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=24
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.259522): 0x805b, result 0, len 20, seqno 0x25
mwifiex_sdio mmc0:0001:1: info: 11D Domain Info Resp: no_of_triplet=1
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x5b, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.259553): 0xb2, act 0x0, len 8, seqno 0x1026
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=12
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.259880): 0x80b2, result 0, len 8, seqno 0x1026
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xb2, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xb0, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xb1, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=3
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.259960): 0xb0, act 0x1, len 115, seqno 0x1027
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=119
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.260400): 0x80b0, result 0, len 115, seqno 0x1027
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xb0, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.260426): 0xb1, act 0x0, len 8, seqno 0x1028
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=21
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Event ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: event: 1142011.264553: cause: 0x2e
mwifiex_sdio mmc0:0001:1: AP EVENT: event id: 0x2e
mwifiex_sdio mmc0:0001:1: cmd_wait_q terminated: -512
mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id (1142021.275294) = 0xb1, act = 0x0
mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_timeout = 1
mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
mwifiex_sdio mmc0:0001:1: last_cmd_index = 4
mwifiex_sdio mmc0:0001:1: last_cmd_id: 00 28 00 5b 00 b2 00 b0 00 b1
mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 93 00 01 00 00 00 01 00 00
mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 3
mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: 80 28 80 5b 80 b2 80 b0 80 28
mwifiex_sdio mmc0:0001:1: last_event_index = 3
mwifiex_sdio mmc0:0001:1: last_event: 00 00 00 0b 00 0a 00 2e 00 00
mwifiex_sdio mmc0:0001:1: data_sent=0 cmd_sent=0
mwifiex_sdio mmc0:0001:1: ps_mode=1 ps_state=0
mwifiex_sdio: Resetting card...

-- 
Thanks
 - wkz

next prev parent reply	other threads:[~2013-08-28 11:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-26 10:27 sd8787 (mwifiex) on big endian system Tobias Waldekranz
2013-08-26 19:16 ` Bing Zhao
2013-08-27  6:17   ` Tobias Waldekranz
2013-08-27 23:42     ` Bing Zhao
2013-08-28 11:52       ` Tobias Waldekranz [this message]
2013-08-29  0:00         ` Bing Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130828115251.GA3504@gmail.com \
    --to=tobias@waldekranz.com \
    --cc=bzhao@marvell.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.