All of lore.kernel.org
 help / color / mirror / Atom feed
* [GIT PULL] x86/kaslr change for v3.12
@ 2013-09-03 18:25 Ingo Molnar
  0 siblings, 0 replies; only message in thread
From: Ingo Molnar @ 2013-09-03 18:25 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: linux-kernel, H. Peter Anvin, Thomas Gleixner, Andrew Morton

Linus,

Please pull the latest x86-kaslr-for-linus git tree from:

   git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-kaslr-for-linus

   HEAD: a02150610776f66b40257624822a879311592bb2 x86, relocs: Move ELF relocation handling to C

This tree contains a single change, ELF relocation handling in C - one of 
the kernel randomization patches that makes sense even without 
randomization present upstream.

 Thanks,

	Ingo

------------------>
Kees Cook (1):
      x86, relocs: Move ELF relocation handling to C


 arch/x86/Kconfig                     |  8 +++-
 arch/x86/Makefile                    |  8 ++--
 arch/x86/boot/compressed/head_32.S   | 31 ++-------------
 arch/x86/boot/compressed/head_64.S   |  1 +
 arch/x86/boot/compressed/misc.c      | 77 +++++++++++++++++++++++++++++++++++-
 arch/x86/include/asm/page_32_types.h |  2 +
 arch/x86/include/asm/page_64_types.h |  5 ---
 arch/x86/include/asm/page_types.h    |  5 +++
 8 files changed, 97 insertions(+), 40 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b32ebf9..8002668 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1716,9 +1716,10 @@ config X86_NEED_RELOCS
 	depends on X86_32 && RELOCATABLE
 
 config PHYSICAL_ALIGN
-	hex "Alignment value to which kernel should be aligned" if X86_32
+	hex "Alignment value to which kernel should be aligned"
 	default "0x1000000"
-	range 0x2000 0x1000000
+	range 0x2000 0x1000000 if X86_32
+	range 0x200000 0x1000000 if X86_64
 	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an
@@ -1736,6 +1737,9 @@ config PHYSICAL_ALIGN
 	  end result is that kernel runs from a physical address meeting
 	  above alignment restrictions.
 
+	  On 32-bit this value must be a multiple of 0x2000. On 64-bit
+	  this value must be a multiple of 0x200000.
+
 	  Don't change this unless you know what you are doing.
 
 config HOTPLUG_CPU
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 07639c6..41250fb 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -16,6 +16,10 @@ endif
 # e.g.: obj-y += foo_$(BITS).o
 export BITS
 
+ifdef CONFIG_X86_NEED_RELOCS
+        LDFLAGS_vmlinux := --emit-relocs
+endif
+
 ifeq ($(CONFIG_X86_32),y)
         BITS := 32
         UTS_MACHINE := i386
@@ -25,10 +29,6 @@ ifeq ($(CONFIG_X86_32),y)
         KBUILD_AFLAGS += $(biarch)
         KBUILD_CFLAGS += $(biarch)
 
-        ifdef CONFIG_RELOCATABLE
-                LDFLAGS_vmlinux := --emit-relocs
-        endif
-
         KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
 
         # Never want PIC in a 32-bit kernel, prevent breakage with GCC built
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 1e3184f..5d6f689 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -181,8 +181,9 @@ relocated:
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	leal	z_extract_offset_negative(%ebx), %ebp
 				/* push arguments for decompress_kernel: */
+	pushl	$z_output_len	/* decompressed length */
+	leal	z_extract_offset_negative(%ebx), %ebp
 	pushl	%ebp		/* output address */
 	pushl	$z_input_len	/* input_len */
 	leal	input_data(%ebx), %eax
@@ -191,33 +192,7 @@ relocated:
 	pushl	%eax		/* heap area */
 	pushl	%esi		/* real mode pointer */
 	call	decompress_kernel
-	addl	$20, %esp
-
-#if CONFIG_RELOCATABLE
-/*
- * Find the address of the relocations.
- */
-	leal	z_output_len(%ebp), %edi
-
-/*
- * Calculate the delta between where vmlinux was compiled to run
- * and where it was actually loaded.
- */
-	movl	%ebp, %ebx
-	subl	$LOAD_PHYSICAL_ADDR, %ebx
-	jz	2f	/* Nothing to be done if loaded at compiled addr. */
-/*
- * Process relocations.
- */
-
-1:	subl	$4, %edi
-	movl	(%edi), %ecx
-	testl	%ecx, %ecx
-	jz	2f
-	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
-	jmp	1b
-2:
-#endif
+	addl	$24, %esp
 
 /*
  * Jump to the decompressed kernel.
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 06e71c2..c337422 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -338,6 +338,7 @@ relocated:
 	leaq	input_data(%rip), %rdx  /* input_data */
 	movl	$z_input_len, %ecx	/* input_len */
 	movq	%rbp, %r8		/* output target address */
+	movq	$z_output_len, %r9	/* decompressed length */
 	call	decompress_kernel
 	popq	%rsi
 
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 0319c88..434f077 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -271,6 +271,79 @@ static void error(char *x)
 		asm("hlt");
 }
 
+#if CONFIG_X86_NEED_RELOCS
+static void handle_relocations(void *output, unsigned long output_len)
+{
+	int *reloc;
+	unsigned long delta, map, ptr;
+	unsigned long min_addr = (unsigned long)output;
+	unsigned long max_addr = min_addr + output_len;
+
+	/*
+	 * Calculate the delta between where vmlinux was linked to load
+	 * and where it was actually loaded.
+	 */
+	delta = min_addr - LOAD_PHYSICAL_ADDR;
+	if (!delta) {
+		debug_putstr("No relocation needed... ");
+		return;
+	}
+	debug_putstr("Performing relocations... ");
+
+	/*
+	 * The kernel contains a table of relocation addresses. Those
+	 * addresses have the final load address of the kernel in virtual
+	 * memory. We are currently working in the self map. So we need to
+	 * create an adjustment for kernel memory addresses to the self map.
+	 * This will involve subtracting out the base address of the kernel.
+	 */
+	map = delta - __START_KERNEL_map;
+
+	/*
+	 * Process relocations: 32 bit relocations first then 64 bit after.
+	 * Two sets of binary relocations are added to the end of the kernel
+	 * before compression. Each relocation table entry is the kernel
+	 * address of the location which needs to be updated stored as a
+	 * 32-bit value which is sign extended to 64 bits.
+	 *
+	 * Format is:
+	 *
+	 * kernel bits...
+	 * 0 - zero terminator for 64 bit relocations
+	 * 64 bit relocation repeated
+	 * 0 - zero terminator for 32 bit relocations
+	 * 32 bit relocation repeated
+	 *
+	 * So we work backwards from the end of the decompressed image.
+	 */
+	for (reloc = output + output_len - sizeof(*reloc); *reloc; reloc--) {
+		int extended = *reloc;
+		extended += map;
+
+		ptr = (unsigned long)extended;
+		if (ptr < min_addr || ptr > max_addr)
+			error("32-bit relocation outside of kernel!\n");
+
+		*(uint32_t *)ptr += delta;
+	}
+#ifdef CONFIG_X86_64
+	for (reloc--; *reloc; reloc--) {
+		long extended = *reloc;
+		extended += map;
+
+		ptr = (unsigned long)extended;
+		if (ptr < min_addr || ptr > max_addr)
+			error("64-bit relocation outside of kernel!\n");
+
+		*(uint64_t *)ptr += delta;
+	}
+#endif
+}
+#else
+static inline void handle_relocations(void *output, unsigned long output_len)
+{ }
+#endif
+
 static void parse_elf(void *output)
 {
 #ifdef CONFIG_X86_64
@@ -325,7 +398,8 @@ static void parse_elf(void *output)
 asmlinkage void decompress_kernel(void *rmode, memptr heap,
 				  unsigned char *input_data,
 				  unsigned long input_len,
-				  unsigned char *output)
+				  unsigned char *output,
+				  unsigned long output_len)
 {
 	real_mode = rmode;
 
@@ -365,6 +439,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	debug_putstr("\nDecompressing Linux... ");
 	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
 	parse_elf(output);
+	handle_relocations(output, output_len);
 	debug_putstr("done.\nBooting the kernel.\n");
 	return;
 }
diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
index ef17af0..f48b17d 100644
--- a/arch/x86/include/asm/page_32_types.h
+++ b/arch/x86/include/asm/page_32_types.h
@@ -15,6 +15,8 @@
  */
 #define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
 
+#define __START_KERNEL_map	__PAGE_OFFSET
+
 #define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 6c896fb..43dcd80 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -32,11 +32,6 @@
  */
 #define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
 
-#define __PHYSICAL_START	((CONFIG_PHYSICAL_START +	 	\
-				  (CONFIG_PHYSICAL_ALIGN - 1)) &	\
-				 ~(CONFIG_PHYSICAL_ALIGN - 1))
-
-#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
 #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
 
 /* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 54c9787..f97fbe3 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -33,6 +33,11 @@
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
+#define __PHYSICAL_START	ALIGN(CONFIG_PHYSICAL_START, \
+				      CONFIG_PHYSICAL_ALIGN)
+
+#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
+
 #ifdef CONFIG_X86_64
 #include <asm/page_64_types.h>
 #else

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2013-09-03 18:25 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-03 18:25 [GIT PULL] x86/kaslr change for v3.12 Ingo Molnar

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.