From: Paul Mackerras <paulus@samba.org>
To: Alexander Graf <agraf@suse.de>,
kvm-ppc@vger.kernel.org, kvm@vger.kernel.org
Subject: [PATCH 05/11] KVM: PPC: Book3S HV: Add support for guest Program Priority Register
Date: Fri, 06 Sep 2013 03:22:09 +0000 [thread overview]
Message-ID: <20130906032209.GF29710@iris.ozlabs.ibm.com> (raw)
In-Reply-To: <20130906031003.GA29710@iris.ozlabs.ibm.com>
POWER7 and later IBM server processors have a register called the
Program Priority Register (PPR), which controls the priority of
each hardware CPU SMT thread, and affects how fast it runs compared
to other SMT threads. This priority can be controlled by writing to
the PPR or by use of a set of instructions of the form or rN,rN,rN
which are otherwise no-ops but have been defined to set the priority
to particular levels.
This adds code to context switch the PPR when entering and exiting
guests and to make the PPR value accessible through the SET/GET_ONE_REG
interface. When entering the guest, we set the PPR as late as
possible, because if we are setting a low thread priority it will
make the code run slowly from that point on. Similarly, the
first-level interrupt handlers save the PPR value in the PACA very
early on, and set the thread priority to the medium level, so that
the interrupt handling code runs at a reasonable speed.
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
Documentation/virtual/kvm/api.txt | 1 +
arch/powerpc/include/asm/exception-64s.h | 8 ++++++++
arch/powerpc/include/asm/kvm_book3s_asm.h | 1 +
arch/powerpc/include/asm/kvm_host.h | 1 +
arch/powerpc/include/uapi/asm/kvm.h | 1 +
arch/powerpc/kernel/asm-offsets.c | 2 ++
arch/powerpc/kvm/book3s_hv.c | 6 ++++++
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 12 +++++++++++-
8 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 1030ac9..34a32b6 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1836,6 +1836,7 @@ registers, find a list below:
PPC | KVM_REG_PPC_ACOP | 64
PPC | KVM_REG_PPC_VRSAVE | 32
PPC | KVM_REG_PPC_LPCR | 64
+ PPC | KVM_REG_PPC_PPR | 64
PPC | KVM_REG_PPC_TM_GPR0 | 64
...
PPC | KVM_REG_PPC_TM_GPR31 | 64
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 07ca627..b86c4db 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -203,6 +203,10 @@ do_kvm_##n: \
ld r10,area+EX_CFAR(r13); \
std r10,HSTATE_CFAR(r13); \
END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947); \
+ BEGIN_FTR_SECTION_NESTED(948) \
+ ld r10,area+EX_PPR(r13); \
+ std r10,HSTATE_PPR(r13); \
+ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948); \
ld r10,area+EX_R10(r13); \
stw r9,HSTATE_SCRATCH1(r13); \
ld r9,area+EX_R9(r13); \
@@ -216,6 +220,10 @@ do_kvm_##n: \
ld r10,area+EX_R10(r13); \
beq 89f; \
stw r9,HSTATE_SCRATCH1(r13); \
+ BEGIN_FTR_SECTION_NESTED(948) \
+ ld r9,area+EX_PPR(r13); \
+ std r9,HSTATE_PPR(r13); \
+ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948); \
ld r9,area+EX_R9(r13); \
std r12,HSTATE_SCRATCH0(r13); \
li r12,n; \
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index 9039d3c..22f4606 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -101,6 +101,7 @@ struct kvmppc_host_state {
#endif
#ifdef CONFIG_PPC_BOOK3S_64
u64 cfar;
+ u64 ppr;
#endif
};
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 9741bf0..b0dcd18 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -464,6 +464,7 @@ struct kvm_vcpu_arch {
u32 ctrl;
ulong dabr;
ulong cfar;
+ ulong ppr;
#endif
u32 vrsave; /* also USPRG0 */
u32 mmucr;
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index e42127d..fab6bc1 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -534,6 +534,7 @@ struct kvm_get_htab_header {
#define KVM_REG_PPC_VRSAVE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb4)
#define KVM_REG_PPC_LPCR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb5)
+#define KVM_REG_PPC_PPR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb6)
/* Transactional Memory checkpointed state:
* This is all GPRs, all VSX regs and a subset of SPRs
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index ccb42cd..5c6ea96 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -516,6 +516,7 @@ int main(void)
DEFINE(VCPU_TRAP, offsetof(struct kvm_vcpu, arch.trap));
DEFINE(VCPU_PTID, offsetof(struct kvm_vcpu, arch.ptid));
DEFINE(VCPU_CFAR, offsetof(struct kvm_vcpu, arch.cfar));
+ DEFINE(VCPU_PPR, offsetof(struct kvm_vcpu, arch.ppr));
DEFINE(VCORE_ENTRY_EXIT, offsetof(struct kvmppc_vcore, entry_exit_count));
DEFINE(VCORE_NAP_COUNT, offsetof(struct kvmppc_vcore, nap_count));
DEFINE(VCORE_IN_GUEST, offsetof(struct kvmppc_vcore, in_guest));
@@ -600,6 +601,7 @@ int main(void)
#ifdef CONFIG_PPC_BOOK3S_64
HSTATE_FIELD(HSTATE_CFAR, cfar);
+ HSTATE_FIELD(HSTATE_PPR, ppr);
#endif /* CONFIG_PPC_BOOK3S_64 */
#else /* CONFIG_PPC_BOOK3S */
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 9c878d7..eceff7e 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -814,6 +814,9 @@ int kvmppc_get_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val)
case KVM_REG_PPC_LPCR:
*val = get_reg_val(id, vcpu->kvm->arch.lpcr);
break;
+ case KVM_REG_PPC_PPR:
+ *val = get_reg_val(id, vcpu->arch.ppr);
+ break;
default:
r = -EINVAL;
break;
@@ -921,6 +924,9 @@ int kvmppc_set_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val)
case KVM_REG_PPC_LPCR:
kvmppc_set_lpcr(vcpu, set_reg_val(id, *val));
break;
+ case KVM_REG_PPC_PPR:
+ vcpu->arch.ppr = set_reg_val(id, *val);
+ break;
default:
r = -EINVAL;
break;
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 85f8dd0..88e7068 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -561,13 +561,15 @@ BEGIN_FTR_SECTION
ld r5, VCPU_CFAR(r4)
mtspr SPRN_CFAR, r5
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ ld r0, VCPU_PPR(r4)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r5, VCPU_LR(r4)
lwz r6, VCPU_CR(r4)
mtlr r5
mtcr r6
- ld r0, VCPU_GPR(R0)(r4)
ld r1, VCPU_GPR(R1)(r4)
ld r2, VCPU_GPR(R2)(r4)
ld r3, VCPU_GPR(R3)(r4)
@@ -581,6 +583,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
ld r12, VCPU_GPR(R12)(r4)
ld r13, VCPU_GPR(R13)(r4)
+BEGIN_FTR_SECTION
+ mtspr SPRN_PPR, r0
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+ ld r0, VCPU_GPR(R0)(r4)
ld r4, VCPU_GPR(R4)(r4)
hrfid
@@ -631,6 +637,10 @@ BEGIN_FTR_SECTION
ld r3, HSTATE_CFAR(r13)
std r3, VCPU_CFAR(r9)
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ ld r4, HSTATE_PPR(r13)
+ std r4, VCPU_PPR(r9)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
/* Restore R1/R2 so we can handle faults */
ld r1, HSTATE_HOST_R1(r13)
--
1.8.4.rc3
WARNING: multiple messages have this Message-ID (diff)
From: Paul Mackerras <paulus@samba.org>
To: Alexander Graf <agraf@suse.de>,
kvm-ppc@vger.kernel.org, kvm@vger.kernel.org
Subject: [PATCH 05/11] KVM: PPC: Book3S HV: Add support for guest Program Priority Register
Date: Fri, 6 Sep 2013 13:22:09 +1000 [thread overview]
Message-ID: <20130906032209.GF29710@iris.ozlabs.ibm.com> (raw)
In-Reply-To: <20130906031003.GA29710@iris.ozlabs.ibm.com>
POWER7 and later IBM server processors have a register called the
Program Priority Register (PPR), which controls the priority of
each hardware CPU SMT thread, and affects how fast it runs compared
to other SMT threads. This priority can be controlled by writing to
the PPR or by use of a set of instructions of the form or rN,rN,rN
which are otherwise no-ops but have been defined to set the priority
to particular levels.
This adds code to context switch the PPR when entering and exiting
guests and to make the PPR value accessible through the SET/GET_ONE_REG
interface. When entering the guest, we set the PPR as late as
possible, because if we are setting a low thread priority it will
make the code run slowly from that point on. Similarly, the
first-level interrupt handlers save the PPR value in the PACA very
early on, and set the thread priority to the medium level, so that
the interrupt handling code runs at a reasonable speed.
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
Documentation/virtual/kvm/api.txt | 1 +
arch/powerpc/include/asm/exception-64s.h | 8 ++++++++
arch/powerpc/include/asm/kvm_book3s_asm.h | 1 +
arch/powerpc/include/asm/kvm_host.h | 1 +
arch/powerpc/include/uapi/asm/kvm.h | 1 +
arch/powerpc/kernel/asm-offsets.c | 2 ++
arch/powerpc/kvm/book3s_hv.c | 6 ++++++
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 12 +++++++++++-
8 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 1030ac9..34a32b6 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1836,6 +1836,7 @@ registers, find a list below:
PPC | KVM_REG_PPC_ACOP | 64
PPC | KVM_REG_PPC_VRSAVE | 32
PPC | KVM_REG_PPC_LPCR | 64
+ PPC | KVM_REG_PPC_PPR | 64
PPC | KVM_REG_PPC_TM_GPR0 | 64
...
PPC | KVM_REG_PPC_TM_GPR31 | 64
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 07ca627..b86c4db 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -203,6 +203,10 @@ do_kvm_##n: \
ld r10,area+EX_CFAR(r13); \
std r10,HSTATE_CFAR(r13); \
END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947); \
+ BEGIN_FTR_SECTION_NESTED(948) \
+ ld r10,area+EX_PPR(r13); \
+ std r10,HSTATE_PPR(r13); \
+ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948); \
ld r10,area+EX_R10(r13); \
stw r9,HSTATE_SCRATCH1(r13); \
ld r9,area+EX_R9(r13); \
@@ -216,6 +220,10 @@ do_kvm_##n: \
ld r10,area+EX_R10(r13); \
beq 89f; \
stw r9,HSTATE_SCRATCH1(r13); \
+ BEGIN_FTR_SECTION_NESTED(948) \
+ ld r9,area+EX_PPR(r13); \
+ std r9,HSTATE_PPR(r13); \
+ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948); \
ld r9,area+EX_R9(r13); \
std r12,HSTATE_SCRATCH0(r13); \
li r12,n; \
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index 9039d3c..22f4606 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -101,6 +101,7 @@ struct kvmppc_host_state {
#endif
#ifdef CONFIG_PPC_BOOK3S_64
u64 cfar;
+ u64 ppr;
#endif
};
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 9741bf0..b0dcd18 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -464,6 +464,7 @@ struct kvm_vcpu_arch {
u32 ctrl;
ulong dabr;
ulong cfar;
+ ulong ppr;
#endif
u32 vrsave; /* also USPRG0 */
u32 mmucr;
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index e42127d..fab6bc1 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -534,6 +534,7 @@ struct kvm_get_htab_header {
#define KVM_REG_PPC_VRSAVE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb4)
#define KVM_REG_PPC_LPCR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb5)
+#define KVM_REG_PPC_PPR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb6)
/* Transactional Memory checkpointed state:
* This is all GPRs, all VSX regs and a subset of SPRs
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index ccb42cd..5c6ea96 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -516,6 +516,7 @@ int main(void)
DEFINE(VCPU_TRAP, offsetof(struct kvm_vcpu, arch.trap));
DEFINE(VCPU_PTID, offsetof(struct kvm_vcpu, arch.ptid));
DEFINE(VCPU_CFAR, offsetof(struct kvm_vcpu, arch.cfar));
+ DEFINE(VCPU_PPR, offsetof(struct kvm_vcpu, arch.ppr));
DEFINE(VCORE_ENTRY_EXIT, offsetof(struct kvmppc_vcore, entry_exit_count));
DEFINE(VCORE_NAP_COUNT, offsetof(struct kvmppc_vcore, nap_count));
DEFINE(VCORE_IN_GUEST, offsetof(struct kvmppc_vcore, in_guest));
@@ -600,6 +601,7 @@ int main(void)
#ifdef CONFIG_PPC_BOOK3S_64
HSTATE_FIELD(HSTATE_CFAR, cfar);
+ HSTATE_FIELD(HSTATE_PPR, ppr);
#endif /* CONFIG_PPC_BOOK3S_64 */
#else /* CONFIG_PPC_BOOK3S */
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 9c878d7..eceff7e 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -814,6 +814,9 @@ int kvmppc_get_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val)
case KVM_REG_PPC_LPCR:
*val = get_reg_val(id, vcpu->kvm->arch.lpcr);
break;
+ case KVM_REG_PPC_PPR:
+ *val = get_reg_val(id, vcpu->arch.ppr);
+ break;
default:
r = -EINVAL;
break;
@@ -921,6 +924,9 @@ int kvmppc_set_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val)
case KVM_REG_PPC_LPCR:
kvmppc_set_lpcr(vcpu, set_reg_val(id, *val));
break;
+ case KVM_REG_PPC_PPR:
+ vcpu->arch.ppr = set_reg_val(id, *val);
+ break;
default:
r = -EINVAL;
break;
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 85f8dd0..88e7068 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -561,13 +561,15 @@ BEGIN_FTR_SECTION
ld r5, VCPU_CFAR(r4)
mtspr SPRN_CFAR, r5
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ ld r0, VCPU_PPR(r4)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r5, VCPU_LR(r4)
lwz r6, VCPU_CR(r4)
mtlr r5
mtcr r6
- ld r0, VCPU_GPR(R0)(r4)
ld r1, VCPU_GPR(R1)(r4)
ld r2, VCPU_GPR(R2)(r4)
ld r3, VCPU_GPR(R3)(r4)
@@ -581,6 +583,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
ld r12, VCPU_GPR(R12)(r4)
ld r13, VCPU_GPR(R13)(r4)
+BEGIN_FTR_SECTION
+ mtspr SPRN_PPR, r0
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+ ld r0, VCPU_GPR(R0)(r4)
ld r4, VCPU_GPR(R4)(r4)
hrfid
@@ -631,6 +637,10 @@ BEGIN_FTR_SECTION
ld r3, HSTATE_CFAR(r13)
std r3, VCPU_CFAR(r9)
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ ld r4, HSTATE_PPR(r13)
+ std r4, VCPU_PPR(r9)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
/* Restore R1/R2 so we can handle faults */
ld r1, HSTATE_HOST_R1(r13)
--
1.8.4.rc3
next prev parent reply other threads:[~2013-09-06 3:22 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-06 3:10 [PATCH 00/11] HV KVM improvements in preparation for POWER8 support Paul Mackerras
2013-09-06 3:10 ` Paul Mackerras
2013-09-06 3:11 ` [PATCH 01/11] KVM: PPC: Book3S HV: Save/restore SIAR and SDAR along with other PMU registers Paul Mackerras
2013-09-06 3:11 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-06 3:17 ` [PATCH 02/11] KVM: PPC: Book3S HV: Implement timebase offset for guests Paul Mackerras
2013-09-06 3:17 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-06 3:18 ` [PATCH 03/11] KVM: PPC: Book3S: Add GET/SET_ONE_REG interface for VRSAVE Paul Mackerras
2013-09-06 3:18 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-14 2:07 ` Paul Mackerras
2013-09-14 2:07 ` Paul Mackerras
2013-09-06 3:21 ` [PATCH 04/11] KVM: PPC: Book3S HV: Add GET/SET_ONE_REG interface for LPCR Paul Mackerras
2013-09-06 3:21 ` Paul Mackerras
2013-09-13 18:36 ` Alexander Graf
2013-09-13 18:36 ` Alexander Graf
2013-09-14 2:21 ` Paul Mackerras
2013-09-14 2:21 ` Paul Mackerras
2013-09-14 5:12 ` Alexander Graf
2013-09-14 5:12 ` Alexander Graf
2013-09-14 5:58 ` Paul Mackerras
2013-09-14 5:58 ` Paul Mackerras
2013-09-14 11:38 ` Alexander Graf
2013-09-14 11:38 ` Alexander Graf
2013-09-06 3:22 ` Paul Mackerras [this message]
2013-09-06 3:22 ` [PATCH 05/11] KVM: PPC: Book3S HV: Add support for guest Program Priority Register Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-17 3:29 ` Benjamin Herrenschmidt
2013-09-17 3:29 ` Benjamin Herrenschmidt
2013-09-20 3:39 ` Alexander Graf
2013-09-20 3:39 ` Alexander Graf
2013-09-06 3:22 ` [PATCH 06/11] KVM: PPC: Book3S HV: Support POWER6 compatibility mode on POWER7 Paul Mackerras
2013-09-06 3:22 ` Paul Mackerras
2013-09-06 5:28 ` Aneesh Kumar K.V
2013-09-06 5:40 ` Aneesh Kumar K.V
2013-09-06 6:38 ` Paul Mackerras
2013-09-06 6:38 ` Paul Mackerras
2013-09-13 19:58 ` Alexander Graf
2013-09-13 19:58 ` Alexander Graf
2013-09-14 2:03 ` Paul Mackerras
2013-09-14 2:03 ` Paul Mackerras
2013-09-06 3:23 ` [PATCH 07/11] KVM: PPC: Book3S HV: Implement H_CONFER Paul Mackerras
2013-09-06 3:23 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-06 3:23 ` [PATCH 08/11] KVM: PPC: Book3S HV: Restructure kvmppc_hv_entry to be a subroutine Paul Mackerras
2013-09-06 3:23 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-06 3:24 ` [PATCH 09/11] KVM: PPC: Book3S HV: Pull out interrupt-reading code into " Paul Mackerras
2013-09-06 3:24 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-06 3:24 ` [PATCH 10/11] KVM: PPC: Book3S HV: Avoid unbalanced increments of VPA yield count Paul Mackerras
2013-09-06 3:24 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-06 3:25 ` [PATCH 11/11] KVM: PPC: Book3S HV: Return -EINVAL rather than BUG'ing Paul Mackerras
2013-09-06 3:25 ` Paul Mackerras
2013-09-13 21:51 ` Alexander Graf
2013-09-13 21:51 ` Alexander Graf
2013-09-11 9:11 ` [PATCH 00/11] HV KVM improvements in preparation for POWER8 support Paul Mackerras
2013-09-11 9:11 ` Paul Mackerras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130906032209.GF29710@iris.ozlabs.ibm.com \
--to=paulus@samba.org \
--cc=agraf@suse.de \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.