[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[Robert P. J. Day]

Fix various misspellings of things like "environment", "kernel",
"default" and "volatile", and throw in a couple grammar fixes.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

---

diff --git a/Makefile b/Makefile
index 1365db6..f55f8c0 100644
--- a/Makefile
+++ b/Makefile
@@ -45,13 +45,13 @@ endif

 #########################################################################
 #
-# U-boot build supports producing a object files to the separate external
+# U-boot build supports generating object files in a separate external
 # directory. Two use cases are supported:
 #
 # 1) Add O= to the make command line
 # 'make O=/tmp/build all'
 #
-# 2) Set environement variable BUILD_DIR to point to the desired location
+# 2) Set environment variable BUILD_DIR to point to the desired location
 # 'export BUILD_DIR=/tmp/build'
 # 'make'
 #
@@ -59,7 +59,7 @@ endif
 # 'export BUILD_DIR=/tmp/build'
 # './MAKEALL'
 #
-# Command line 'O=' setting overrides BUILD_DIR environent variable.
+# Command line 'O=' setting overrides BUILD_DIR environment variable.
 #
 # When none of the above methods is used the local build is performed and
 # the object files are placed in the source directory.
diff --git a/README b/README
index ccd47fa..13e3ac0 100644
--- a/README
+++ b/README
@@ -3360,7 +3360,7 @@ Configuration Settings:
 		the Linux kernel; all data that must be processed by
 		the Linux kernel (bd_info, boot arguments, FDT blob if
 		used) must be put below this limit, unless "bootm_low"
-		enviroment variable is defined and non-zero. In such case
+		environment variable is defined and non-zero. In such case
 		all data for the Linux kernel must be between "bootm_low"
 		and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.	 The environment
 		variable "bootm_mapsize" will override the value of
@@ -3473,7 +3473,7 @@ Configuration Settings:

 - CONFIG_ENV_FLAGS_LIST_DEFAULT
 - CONFIG_ENV_FLAGS_LIST_STATIC
-	Enable validation of the values given to enviroment variables when
+	Enable validation of the values given to environment variables when
 	calling env set.  Variables can be restricted to only decimal,
 	hexadecimal, or boolean.  If CONFIG_CMD_NET is also defined,
 	the variables can also be restricted to IP address or MAC address.
diff --git a/arch/arm/cpu/arm926ejs/at91/eflash.c b/arch/arm/cpu/arm926ejs/at91/eflash.c
index 3e21cdb..3f39264 100644
--- a/arch/arm/cpu/arm926ejs/at91/eflash.c
+++ b/arch/arm/cpu/arm926ejs/at91/eflash.c
@@ -28,7 +28,7 @@
  * by u-Boot commands.
  *
  * Note: Redundant environment will not work in this flash since
- * it does use partial page writes. Make sure the environent spans
+ * it does use partial page writes. Make sure the environment spans
  * whole pages!
  */

diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index cde3172..d4711c0 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -302,7 +302,7 @@ int arch_cpu_init(void)
 	/*
 	 * Configures the I/O voltage of the pads connected to Egigabit
 	 * Ethernet interface to 1.8V
-	 * By defult it is set to 3.3V
+	 * By default it is set to 3.3V
 	 */
 	reg = readl(KW_REG_MPP_OUT_DRV_REG);
 	reg |= (1 << 7);
diff --git a/board/RPXlite_dw/README b/board/RPXlite_dw/README
index 14296b2..9e2d0f4 100644
--- a/board/RPXlite_dw/README
+++ b/board/RPXlite_dw/README
@@ -87,9 +87,9 @@ u-boot>

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-A word on the U-Boot enviroment variable setting and usage :
+A word on the U-Boot environment variable setting and usage :

-In the beginning, you could just need very simple defult environment variable setting,
+In the beginning, you could just need very simple default environment variable setting,
 like[include/configs/RPXlite.h] :

 #define CONFIG_BOOTCOMMAND                                                      \
diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
index 524f3fc..0389a1d 100644
--- a/board/freescale/mx28evk/README
+++ b/board/freescale/mx28evk/README
@@ -29,11 +29,11 @@ Environment Storage

 There are two targets for mx28evk:

-"make mx28evk_config"		- store enviroment variables into MMC
+"make mx28evk_config"		- store environment variables into MMC

 or

-"make mx28evk_nand_config"	- store enviroment variables into NAND flash
+"make mx28evk_nand_config"	- store environment variables into NAND flash

 Choose the target accordingly.

diff --git a/board/sbc8349/README b/board/sbc8349/README
index 2c35919..e2d60cc 100644
--- a/board/sbc8349/README
+++ b/board/sbc8349/README
@@ -50,7 +50,7 @@ is a summary of that information:
     trying to preserve your old environment settings and user flash).
   - Set the start address of the erase/flash process to FF80_0000
   - Set the target RAM required to 64kB.
-  - Select sectors for erasing (see note on enviroment below)
+  - Select sectors for erasing (see note on environment below)
   - Select Erase and Reprogram.

 Note that some versions of the register files used with Workbench
diff --git a/common/image.c b/common/image.c
index 2c88091..802a79e 100644
--- a/common/image.c
+++ b/common/image.c
@@ -965,7 +965,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
  * @initrd_end: pointer to a ulong variable, will hold final init ramdisk
  *      end address (after possible relocation)
  *
- * boot_ramdisk_high() takes a relocation hint from "initrd_high" environement
+ * boot_ramdisk_high() takes a relocation hint from "initrd_high" environment
  * variable and if requested ramdisk data is moved to a specified location.
  *
  * Initrd_start and initrd_end are set to final (after relocation) ramdisk
diff --git a/doc/README.hwconfig b/doc/README.hwconfig
index cf54965..b6ddb43 100644
--- a/doc/README.hwconfig
+++ b/doc/README.hwconfig
@@ -18,7 +18,7 @@ Current implementation details/limitations:
    U-Boot. But I haven't bothered yet.

 2. Since we don't implement a hwconfig command, i.e. we're working
-   with the environement directly, there is no way to tell that
+   with the environment directly, there is no way to tell that
    toggling a particular option will need a reboot to take
    effect. So, for now it's advised to always reboot the
    target after modifying the hwconfig variable.
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 5936f9b..60ed92d 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -7,7 +7,7 @@
  *   Copyright 2010-2011 Freescale Semiconductor, Inc.
  *   author Andy Fleming
  *
- * Some code get from linux kenrel
+ * Some code copied from linux kernel
  * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
  */
 #include <miiphy.h>
diff --git a/examples/standalone/README.smc91111_eeprom b/examples/standalone/README.smc91111_eeprom
index 28e7e69..a2d52e7 100644
--- a/examples/standalone/README.smc91111_eeprom
+++ b/examples/standalone/README.smc91111_eeprom
@@ -154,10 +154,10 @@ The MAC address can be stored in four locations:

 -Boot environmental variable in Flash <- can not change, without
 					  re-flashing U-boot.
-U-Boot environental variable	       <- can not change, without
+U-Boot environmental variable	       <- can not change, without
 					  resetting board/U-Boot
-LAN91C111 Registers		       <- volitle
-LAN91C111 EEPROM		       <- Non Volitle
+LAN91C111 Registers		       <- volatile
+LAN91C111 EEPROM		       <- Non-volatile

 If you have not activated the network, and do not have a hardcoded
 or pre-assigned MAC address in U-boot, the environmental variables
diff --git a/include/common.h b/include/common.h
index 8addf43..6aa2398 100644
--- a/include/common.h
+++ b/include/common.h
@@ -383,7 +383,7 @@ int setenv_hex(const char *varname, ulong value);
 /**
  * setenv_addr - Set an environment variable to an address in hex
  *
- * @varname:	Environmet variable to set
+ * @varname:	Environment variable to set
  * @addr:	Value to set it to
  * @return 0 if ok, 1 on error
  */
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index c2d04a2..7321b60 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -119,7 +119,7 @@

 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SECT_SIZE	0x20000 /* Size of one Flash sector */
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE	/* Use one Flash sector for enviroment	*/
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE	/* Use one Flash sector for environment	*/
 #define CONFIG_ENV_ADDR		0xFFFC0000
 #define CONFIG_ENV_OFFSET		0	/* starting right@the beginning  */

diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index d63d0c4..0feef1e 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -305,7 +305,7 @@
 #define CONFIG_ENV_IN_OWN_SECT	1

 /* Define this to contain any number of null terminated strings that
- * will be part of the default enviroment compiled into the boot image.
+ * will be part of the default environment compiled into the boot image.
  */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 "quiet=0\0" \
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 644330a..c5a2b08 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -817,7 +817,7 @@ int himport_r(struct hsearch_data *htab,
 	 * size of 8 per entry (= safety factor of ~5) should provide enough
 	 * safety margin for any existing environment definitions and still
 	 * allow for more than enough dynamic additions. Note that the
-	 * "size" argument is supposed to give the maximum enviroment size
+	 * "size" argument is supposed to give the maximum environment size
 	 * (CONFIG_ENV_SIZE).  This heuristics will result in
 	 * unreasonably large numbers (and thus memory footprint) for
 	 * big flash environments (>8,000 entries for 64 KB
diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c
index da37d66..cca1a26 100644
--- a/post/board/lwmon5/sysmon.c
+++ b/post/board/lwmon5/sysmon.c
@@ -22,7 +22,7 @@
  *
  * LCD backlight is not enabled if temperature values are not within
  * allowed ranges (-30 .. + 80). The brightness of backlite can be
- * controlled by setting "brightness" enviroment variable. Default value is 50%
+ * controlled by setting "brightness" environment variable. Default value is 50%
  *
  * See the list of all parameters in the sysmon_table below
  */

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================

[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[Fabio Estevam]

On Sun, Sep 15, 2013 at 7:10 PM, Robert P. J. Day <rpjday@crashcourse.ca> wrote:
>
> Fix various misspellings of things like "environment", "kernel",
> "default" and "volatile", and throw in a couple grammar fixes.

Isn't there a typo in the subject itself ("typoes") ?

[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[Robert P. J. Day]

On Sun, 15 Sep 2013, Fabio Estevam wrote:

> On Sun, Sep 15, 2013 at 7:10 PM, Robert P. J. Day <rpjday@crashcourse.ca> wrote:
> >
> > Fix various misspellings of things like "environment", "kernel",
> > "default" and "volatile", and throw in a couple grammar fixes.
>
> Isn't there a typo in the subject itself ("typoes") ?

  i believe it's one of those matters of personal taste whether you
spell it "typos" or "typoes". but i can resubmit if that's the
standard here.

rday

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================

[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[Fabio Estevam]

On Sun, Sep 15, 2013 at 7:49 PM, Robert P. J. Day <rpjday@crashcourse.ca> wrote:
> On Sun, 15 Sep 2013, Fabio Estevam wrote:
>
>> On Sun, Sep 15, 2013 at 7:10 PM, Robert P. J. Day <rpjday@crashcourse.ca> wrote:
>> >
>> > Fix various misspellings of things like "environment", "kernel",
>> > "default" and "volatile", and throw in a couple grammar fixes.
>>
>> Isn't there a typo in the subject itself ("typoes") ?
>
>   i believe it's one of those matters of personal taste whether you
> spell it "typos" or "typoes". but i can resubmit if that's the
> standard here.

Ok, thanks for the clarification. I wasn't aware of the 'typoes' variant.

As you are a native English speaker, I trust you word :-)

[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[Albert ARIBAUD]

Hi Robert,

On Sun, 15 Sep 2013 18:49:23 -0400 (EDT), "Robert P. J. Day"
<rpjday@crashcourse.ca> wrote:

> On Sun, 15 Sep 2013, Fabio Estevam wrote:
> 
> > On Sun, Sep 15, 2013 at 7:10 PM, Robert P. J. Day <rpjday@crashcourse.ca> wrote:
> > >
> > > Fix various misspellings of things like "environment", "kernel",
> > > "default" and "volatile", and throw in a couple grammar fixes.
> >
> > Isn't there a typo in the subject itself ("typoes") ?
> 
>   i believe it's one of those matters of personal taste whether you
> spell it "typos" or "typoes". but i can resubmit if that's the
> standard here.

Well, I'd slightly out of my realm here as I usually do rigid pedantism
in French only :), but it seems like the correct plural form of "typo"
is "typos", because, unlike "tomato" or "hero", "typo" is not a word in
itself but an abbreviation, and thus follows the same rule as "photo"
or "radio" does [1].

Thus I vote for fixing "typoes" into "typos".

> rday

Amicalement,
-- 
Albert.
[1] ... or should it be "do"? :)

[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[Albert ARIBAUD]

(possible resend to fix... a typo. No kidding.)

Hi Robert,

On Sun, 15 Sep 2013 18:49:23 -0400 (EDT), "Robert P. J. Day"
<rpjday@crashcourse.ca> wrote:

> On Sun, 15 Sep 2013, Fabio Estevam wrote:
> 
> > On Sun, Sep 15, 2013 at 7:10 PM, Robert P. J. Day <rpjday@crashcourse.ca> wrote:
> > >
> > > Fix various misspellings of things like "environment", "kernel",
> > > "default" and "volatile", and throw in a couple grammar fixes.
> >
> > Isn't there a typo in the subject itself ("typoes") ?
> 
>   i believe it's one of those matters of personal taste whether you
> spell it "typos" or "typoes". but i can resubmit if that's the
> standard here.

Well, I'm slightly out of my realm here as I usually do rigid pedantism
in French only :), but it seems like the correct plural form of "typo"
is "typos", because, unlike "tomato" or "hero", "typo" is not a word in
itself but an abbreviation, and thus follows the same rule as "photo"
or "radio" does [1].

Thus I vote for fixing "typoes" into "typos".

> rday

Amicalement,
-- 
Albert.
[1] ... or should it be "do"? :)

[U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.

[Robert P. J. Day]

On Mon, 16 Sep 2013, Albert ARIBAUD wrote:

> (possible resend to fix... a typo. No kidding.)
>
> Hi Robert,
>
> On Sun, 15 Sep 2013 18:49:23 -0400 (EDT), "Robert P. J. Day"
> <rpjday@crashcourse.ca> wrote:
>
> > On Sun, 15 Sep 2013, Fabio Estevam wrote:
> >
> > > On Sun, Sep 15, 2013 at 7:10 PM, Robert P. J. Day <rpjday@crashcourse.ca> wrote:
> > > >
> > > > Fix various misspellings of things like "environment", "kernel",
> > > > "default" and "volatile", and throw in a couple grammar fixes.
> > >
> > > Isn't there a typo in the subject itself ("typoes") ?
> >
> >   i believe it's one of those matters of personal taste whether you
> > spell it "typos" or "typoes". but i can resubmit if that's the
> > standard here.
>
> Well, I'm slightly out of my realm here as I usually do rigid pedantism
> in French only :), but it seems like the correct plural form of "typo"
> is "typos", because, unlike "tomato" or "hero", "typo" is not a word in
> itself but an abbreviation, and thus follows the same rule as "photo"
> or "radio" does [1].
>
> Thus I vote for fixing "typoes" into "typos".

  ok, will resubmit as "[PATCH v2]" shortly.

rday

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================