From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/10] ARM: shmobile: r8a7791 IRQC platform device support
Date: Tue, 01 Oct 2013 08:12:19 +0000 [thread overview]
Message-ID: <20131001081219.4136.26850.sendpatchset@w520> (raw)
In-Reply-To: <20131001081143.4136.46925.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Add a platform device for the r8a7791 IRQC hardware
driving IRQ pins IRQ0 to IRQ9. The Linux interrupt
number is statically assigned to allow board code
written in C to make use of static interrupt numbers.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/setup-r8a7791.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- 0002/arch/arm/mach-shmobile/setup-r8a7791.c
+++ work/arch/arm/mach-shmobile/setup-r8a7791.c 2013-10-01 16:45:32.000000000 +0900
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
#include <mach/common.h>
@@ -109,6 +110,31 @@ static const struct resource cmt00_resou
&cmt##idx##_platform_data, \
sizeof(struct sh_timer_config))
+static struct renesas_irqc_config irqc0_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */
+};
+
+static struct resource irqc0_resources[] = {
+ DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+ DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+ DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */
+ DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */
+ DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */
+ DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */
+ DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */
+ DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */
+};
+
+#define r8a7791_register_irqc(idx) \
+ platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+ idx, irqc##idx##_resources, \
+ ARRAY_SIZE(irqc##idx##_resources), \
+ &irqc##idx##_data, \
+ sizeof(struct renesas_irqc_config))
+
void __init r8a7791_add_dt_devices(void)
{
r8a7791_register_scif(SCIFA0);
@@ -132,6 +158,7 @@ void __init r8a7791_add_dt_devices(void)
void __init r8a7791_add_standard_devices(void)
{
r8a7791_add_dt_devices();
+ r8a7791_register_irqc(0);
}
void __init r8a7791_init_early(void)
WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/10] ARM: shmobile: r8a7791 IRQC platform device support
Date: Tue, 01 Oct 2013 17:12:19 +0900 [thread overview]
Message-ID: <20131001081219.4136.26850.sendpatchset@w520> (raw)
In-Reply-To: <20131001081143.4136.46925.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Add a platform device for the r8a7791 IRQC hardware
driving IRQ pins IRQ0 to IRQ9. The Linux interrupt
number is statically assigned to allow board code
written in C to make use of static interrupt numbers.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/setup-r8a7791.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- 0002/arch/arm/mach-shmobile/setup-r8a7791.c
+++ work/arch/arm/mach-shmobile/setup-r8a7791.c 2013-10-01 16:45:32.000000000 +0900
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
#include <mach/common.h>
@@ -109,6 +110,31 @@ static const struct resource cmt00_resou
&cmt##idx##_platform_data, \
sizeof(struct sh_timer_config))
+static struct renesas_irqc_config irqc0_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */
+};
+
+static struct resource irqc0_resources[] = {
+ DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+ DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+ DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */
+ DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */
+ DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */
+ DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */
+ DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */
+ DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */
+};
+
+#define r8a7791_register_irqc(idx) \
+ platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+ idx, irqc##idx##_resources, \
+ ARRAY_SIZE(irqc##idx##_resources), \
+ &irqc##idx##_data, \
+ sizeof(struct renesas_irqc_config))
+
void __init r8a7791_add_dt_devices(void)
{
r8a7791_register_scif(SCIFA0);
@@ -132,6 +158,7 @@ void __init r8a7791_add_dt_devices(void)
void __init r8a7791_add_standard_devices(void)
{
r8a7791_add_dt_devices();
+ r8a7791_register_irqc(0);
}
void __init r8a7791_init_early(void)
next prev parent reply other threads:[~2013-10-01 8:12 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-01 8:11 [PATCH 00/10] ARM: shmobile: r8a7791 SoC and Koelsch update V2 Magnus Damm
2013-10-01 8:11 ` Magnus Damm
2013-10-01 8:11 ` [PATCH 01/10] ARM: shmobile: Introduce r8a7791_add_standard_devices() Magnus Damm
2013-10-01 8:11 ` Magnus Damm
2013-10-03 2:36 ` Simon Horman
2013-10-03 2:36 ` Simon Horman
2013-10-01 8:12 ` [PATCH 02/10] ARM: shmobile: Use r8a7791_add_standard_devices() on Koelsch Magnus Damm
2013-10-01 8:12 ` Magnus Damm
2013-10-03 4:20 ` Simon Horman
2013-10-03 4:20 ` Simon Horman
2013-10-01 8:12 ` Magnus Damm [this message]
2013-10-01 8:12 ` [PATCH 03/10] ARM: shmobile: r8a7791 IRQC platform device support Magnus Damm
2013-10-03 2:37 ` Simon Horman
2013-10-03 2:37 ` Simon Horman
2013-10-01 8:12 ` [PATCH 04/10] ARM: shmobile: r8a7791 IRQC device tree node Magnus Damm
2013-10-01 8:12 ` Magnus Damm
2013-10-03 2:43 ` Simon Horman
2013-10-03 2:43 ` Simon Horman
2013-10-01 8:12 ` [PATCH 05/10] ARM: shmobile: r8a7791 Arch timer " Magnus Damm
2013-10-01 8:12 ` Magnus Damm
2013-10-03 2:44 ` Simon Horman
2013-10-03 2:44 ` Simon Horman
2013-10-01 8:12 ` [PATCH 06/10] ARM: shmobile: r8a7791 Arch timer workaround Magnus Damm
2013-10-01 8:12 ` Magnus Damm
2013-10-03 3:45 ` Simon Horman
2013-10-03 3:45 ` Simon Horman
2013-10-01 8:12 ` [PATCH 07/10] ARM: shmobile: Use arch timer on Koelsch Magnus Damm
2013-10-01 8:12 ` Magnus Damm
2013-10-03 4:21 ` Simon Horman
2013-10-03 4:21 ` Simon Horman
2013-10-01 8:13 ` [PATCH 08/10] ARM: shmobile: r8a7791 SMP device tree node Magnus Damm
2013-10-01 8:13 ` Magnus Damm
2013-10-03 3:46 ` Simon Horman
2013-10-03 3:46 ` Simon Horman
2013-10-01 8:13 ` [PATCH 09/10] ARM: shmobile: r8a7791 SMP support Magnus Damm
2013-10-01 8:13 ` Magnus Damm
2013-10-03 3:47 ` Simon Horman
2013-10-03 3:47 ` Simon Horman
2013-10-01 8:13 ` [PATCH 10/10] ARM: shmobile: Use SMP on Koelsch Magnus Damm
2013-10-01 8:13 ` Magnus Damm
2013-10-03 4:22 ` Simon Horman
2013-10-03 4:22 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131001081219.4136.26850.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.